In Transformers: Decepticons, Optimus Prime lands on Earth along with the other Autobots to stop the Decepticons. Optimus does not appear until Megatron is released and Starscream escapes with the Allspark. Optimus fights Megatron, but is defeated and is killed while Megatron gives chase to his traitorous second-in-command. In the 2009 Revenge of the Fallen video game by Activision, Optimus Prime is among the playable characters.
Jetwing Optimus Prime is a retool of Revenge of the Fallen Leader class Buster Optimus Prime, with an accompanying large jet pack and massive dual Gatling Cannons. The base Optimus Prime figure has several modifications including: a new stomach area and elbow flares to reflect the changes to Optimus Prime's CG model in Dark of the Moon, modified lower arms to incorporate MechTech ports and clips for the cannons, and a retooled area under his back so the jet pack can fit on more securely. The dual energon blades mounted on his arms have been removed. The toy retains Buster Optimus Prime's electronics, but batteries are not included.
This Classics Optimus Prime is a smaller, deluxe-class toy bearing a greater resemblance to the original G1 toy. He was only available in a special Versus pack with a similarly unique Classics Megatron toy and later the FAB version of the 2007 movie Prime. Later releases of this toy had him individually packed in some European countries. His vehicle mode and robot mode is based upon the original toy, but due to limitations in design, budget and gimmick, does not succeed very well. His thighs cannot collapse into his lower legs, meaning they are exposed in vehicle mode, as is his head. Although to be fair, you wouldn't really notice the leg thing if he had a trailer. But, he is greatly articulated.
As the number of sets released has increased, the harder it has been for stores to parcel out their shelving space. In order to make more sales, decisions have to be made as to which sets will be carried. Not every store can carry the whole product line (not even all official LEGO stores carry the whole product line). This process will favor the sets that drive sales the most, such as the licensed sets. The traditional boxes of bricks are pushed out of the way for the more profitable lines.
Released as part of the first wave of the Energon Igniters Nitro Series, this Optimus Prime is a new Voyager-sized mold that converts from a robot based on his Age of Extinction body into a truck in 11 steps, and he features 5mm-compatible hands & articulation on his head, arms, and only his upper legs. He also features built-in Ion Cannons in this lower leg panels, activated in vehicle mode. He also comes with his own energon core, which is a different mold from his Power Plus toy.
This Japanese-exclusive black-and-gold redeco of First Edition Voyager Class Optimus Prime was available exclusively at the fourteen stores taking part in the Cybertron Satellite promotion. It depicts Prime coated in an alloy reverse-engineered by Ratchet from MECH equipment that protects Optimus against Dark Energon and other techno-biological hazards.
This reissue of the original Generation 1 Optimus Prime figure comes in a two-pack with the Deluxe-Class Dark of the Moon Optimus Prime figure. Prime himself is almost identical to the Encore release, save for his trailer hitch which was retooled to allow a peg to be inserted within it while still being able to be inserted into the trailer itself (making it compatible with his G1 trailer and the new trailer included). Like the Encore release, he features lighter colors and tampographed shoulder symbols (which vary slightly from the Encore release).
The SS-03 version of Takara's Deluxe-class Optimus figure, based on the Anniversary release, was released in Hasbro markets in a two pack with the smaller Japanese Megatron figure. There are some tiny but notable differences between this and the Anniversary figure; the Hasbro version uses a more neutral dark-gray for the main body as opposed to the Takara version's blue-tinted dark-gray, plain dark-blue plastic rather than dark-blue-with-sparkles, and plain yellow paint for the cab's lights rather than sparkly-yellow/gold.
Optimus Prime (formerly Orion Pax) is constantly, if not always depicted as having strong moral character, excellent leadership, and sound decision-making skills, and possesses brilliant military tactics, powerful martial arts, and advanced extraterrestrial weaponry. Optimus Prime has a strong sense of honor and justice, being dedicated to building peaceful and mutually beneficial co-existence with humans, the protection of life and liberty of all sentient species. As the current Matrix of Leadership bearer, Optimus Prime is the de facto leader of the Autobots, a faction of a transforming species of synthetic intelligence from the planet Cybertron. The Autobots are constantly waging civil war against a rival faction of transforming robots called Decepticons. According to Bob Budiansky, co-writer of the Transformers series, Dennis O'Neil was responsible for his name.
QT-M Optimus Prime is a redeco of the GT-R Optimus Prime mold in the colors of the Transformers-sponsored Nissan GT-R used by the Team Mach racing team (a vehicle previously used as the base for non-toy character Mach Five Racing Prime). Like Transformers GT's Safety Prime, this toy was a collaboration with the Super GT racing series and was given away free to young children who attended TakaraTomy-sponsored "Kids Walk" events held by Super GT in the fall season of 2015.
Part of 9th wave of One-Step Changers, and the first of the Combiner Force subline, this Optimus Prime is yet another new mold, with a different transformation scheme (a similar engineering to Age of Extinction's Bumblebee) consisting of pulling the switch on the back (do not hold the truck kibble when you transform him). Like most One-Step Changers, Optimus Prime features limited articulation on the shoulders, and features 5mm compatible hands.
Smallest Transforming Transformers Convoy is the smallest fully transforming Optimus Prime toy yet. He features an accurate transformation sequence based on the original full-sized toy, but understandably has no detachable hands, and has little articulation. His sculpt is based upon his cartoon appearances. He comes with a tiny version of his laser rifle.
In this set, both the buildable Optimus Prime and the included Kreon figure are in the style of Beast Hunters Optimus Prime. In addition to the robot mode having a buildable shield and sword, both it and the vehicle build have two firing missile launchers. Additionally, four hands are included, with two possibilities for each arm. These Optimus Primes come with a buildable Predacon beast Lazerback and an Energon Kicker Kreon.
It uses the 1985 post-rub mold, no metal plates, and the trailer's launcher fires short(this can be modded with some disassembly, Toy Polloi has a video showing how). The wheels roll a bit iffy, this is a common documented issue. Personally I believe there is a slight molding error in the robot, the legs do not seem to fold down quite as far as an official cab's legs do, causing a very slight lean backwards.
This small version of Energon Optimus Prime was released by Kabaya as part of their DX Transformers line of candy toys. Prime transforms in the same manner as the larger Energon figures do, though his arms have to be removed at the shoulder and reinserted into his back to form truck mode. The Prime Force were sold in a separate set in the DX Transformers series, and can combine with Prime to form his Super Mode. Optimus came with a stick of gum.
As had first been done in the Armada line, Takara elected to supplement their release of the Super class Optimus Prime figure with a new-mold Deluxe class toy. Coming without trailer, Prime Force or electronics, this Prime discarded the larger toy's ability to form Super Mode in favor of being able to Powerlinx with the other compatible toys of the Energon line, forming either a torso or a pair of legs that the other Autobots could connect to. Like the Deluxe Armada Prime, this one too was on the small side for its size class, but just as that figure could, this small Prime can still tow the Super class figure's trailer.
1.) MP 10 EVA. Its arguably the best mold of any figure, and that color scheme! 2.) MP 12 Lambor. My fav transformer aand my fav car as a kid, cant beat it. 3.) MP Grimlock. Robot mode just looks like be dominates the shelf, regardless of who be is next to. 4.) MP Exhaust, mostly bc of the novelty factor as he is a pain to get in the States, plus his back story is cool. If not for that, MP 11 Skywarp would take this spot. 5.) MP Soundwave w/ cassettes. Duh!
But in between those two most well-known alternate modes, Bumblebee has had at least six others. For the Transformers: Alternity Japanese toy line, he was a yellow Suzuki Swift Sport, which at least is still a small, quirky car. Ditto the AMC Pacer, the form he took when he travelled back in time to the ‘70s in a G.I. Joe vs. The Transformers crossover comic. Somewhat similarly, he’s a Supermini police car in the Transformers Animated series. But then he’s also been a couple of other muscle cars: as the Timelines Deluxe Goldbug toy, he’s a Chrysler ME 412 concept car, and in the Transformers: Prime animated series he can take the form of the fictional Urbana 500 muscle car. Bumblebee also has a number of different Cybertronian vehicle modes.
The character of Optimus Prime first appears in the 2007 Transformers film as the leader of the Autobots in the search for the Allspark. He intends to destroy it, even if it means sacrificing himself, before the Decepticons can use it to create a new army to conquer the universe. After arriving and scanning a Peterbilt truck, Optimus greets Sam Witwicky and Mikaela Banes, introducing his men and explaining why they have come to Earth. During the final battle, Optimus slays the hate-filled Decepticon Bonecrusher and faces his ancient enemy, Megatron. Unable to match Megatron in combat, Optimus urges Sam to push the Allspark into his chest, which will destroy them both. Instead, Sam rams the Allspark into Megatron's chest, destroying it and killing the Decepticon leader. The film ends with Optimus sending out a deep-space signal, inviting other Autobots to join them on Earth.
Hot Rod identified the Decepticons on board through the damaged hull and immediately attacked the targets within using low powered, rapid fire bursts. When the Decepticons returned fire, Hot Rod changed tactics and began firing more concentrated blasts at the shuttle itself. Eventually, he managed to disable the shuttle. With their cover blown, Megatron ordered his forces to attack and the Decepticons began pouring out, beginning their planned assault on Autobot City. Before focusing his attention on the onslaught, an incensed Megatron destroyed the observation platform on which Hot Rod and Daniel were standing. True to his protective Autobot instincts, the first concern of Hot Rod was for the safety of Daniel. Quickly shielding the young boy, the two survived the platform collapse but were soon cornered by Blitzwing and Shrapnel. Timely intervention by the old and experienced Autobot Kup diverted the cannon fire from Blitzwing and allowed the three of them to escape.
If he didn't send Sludge with them, the odds were 2 to 1 that the Autobots would all be destroyed as part of Operation Black Coral. The one possible positive outcome ended with Optimus fighting a duel against Megatron atop Mount Lomas in which Prime (somehow) split into his three components to surround his archenemy. This provoked Rumble into "assisting" his leader with an earthquake that destroyed the Decepticons' entire superfuel operation.
But it is scary to think that there is a strong possibility they will look at redoing almost every Masterpiece now if this is a success. The MP+ releases have me feeling tired. I don’t have to get them but I have a completionist mentality. But a redo... I’m almost ready to check out of MP completely. I waited so long to get six seekers done pretty well to me. Now there’s a chance they will redo them. And soundwave. I sure hope I’m just being a worry wart.
During the May 30 launch event for the Revenge of the Fallen toyline in Japan, Legends Optimus were given out to attendees. The only difference is a sticker on the packaging commemorating the event. Optimus also saw release as a blindpacked figure for the first wave of the Revenge of the Fallen EZ Collection sets. And like all first waves, he comes with a flyer advertising the TakaraTomy releases of the Revenge of the Fallen toyline. His pair of legs is also mistranformed to fit in the bubble.
In the episode "Along Came a Spider", Optimus discoveres that Elita did survive the ordeal with the giant spiders and was transformed into the technorganic Decepticon Blackarachnia. He offeres to try and help her, but is turned down violently as Blackarachnia has still not forgiven him. However, when she nearly dies trying to use the Allspark key to purge her organic half, Optimus saves her and repeats his offer to help her. She stings him instead, vowing that she will never trust him.
During the war, Optimus was killed in battle by Megatron, but was eventually resurrected. The Fight Begins Coming to the dire realization that the war against the Decepticons had become a never-ending arms race, Optimus Prime challenged Megatron to single-combat, with their troops acting as witnesses to their terrible and final clash. The battle between both faction leaders ended with Megatron beaten down and goading Optimus into delivering the kill shot...
A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.
"Cybertron Optimus Prime" new features a darker grey plastic, and mostly shares the same paint mask to the original Deluxe class figure, with added paint details on his head and the mesh-like pattern on the front of his "entry" mode. The silver paint on his chest was slightly changed from the original and he lacks the paint on his feet, his "headlights", and the top of his "entry" mode. Lastly, he features Cyberglyphics on his vehicle mode windows, and the rear sides of the vehicle. His flame attachment is now cast in translucent red plastic with orange sprays.
When Vector Prime reminisced on some of the highlights of his multiversal career, he remembered many events involving Optimus Prime. Among these events was Optimus Prime using the Matrix of Leadership on the Hate Plague, Shockwave taunting a disembodied Optimus Prime, and Megatron firing on the head of Optimus Prime, creating a time storm that necessitated Vector Prime's intervention to ensure Optimus Prime's survival. Vector Prime: In the Beginning
Optimus appeared in the 2008 BotCon voice actor play "Bee in the City", voiced by David Kaye. In this story, Professor Sumdac attempts to create a teleportation system to get the Autobots to Cybertron, but an interaction with Sari's key ends up transporting Optimus Prime, Bumblebee, and Sari to Transtech Cybertron. There, they met Flareup and are detained by Shockwave. Bumblebee teams up with Beast Wars Megatron to free his comrades, but must then stop Megatron from taking the key for himself. Afterward, the Autobots and Sari returned to their own dimension.
I mean you could argue that they are returning to the way the original Transformer toys worked. Here is an example of the OG Optimus toy. I went to Hasbro's website to see what the most current version of Optimus is that they are selling and I found this. That actually looks surprisingly similar, though I would argue they have gone more of the direction of making the robot look more robotic and the truck a little less truck like but its still a solid middle ground.
Micromasters teams have teamwork ratings instead of ranks. Unlike the other ratings, teamwork seems to be split along faction lines, with Autobots typically holding higher teamwork ratings than Decepticons. A second unique spec value, Cooperation, replaced the Firepower rating used on individuals' cards. The traditional order (as above) was also abandoned for the Micromaster team specifications.
Part of the first wave of Prime: Beast Hunters Series 3 Cyberverse Commander Class toys, Optimus Prime is an all-new mold. He now transforms into a monstrous, flat-nosed truck with spiky fenders at the front and a cage compartment at the back, and comes with the Thunder Lance and Star Saber. Each of the weapons features two differently-placed 3mm posts, allowing them to be held by his hands, or mount onto two ports on the rear vehicle sides, as well as allowing the lance to additionally be used as a pressure-fired missile launcher.
At BotCon 2005, Hideaki Yoke revealed that Optimus Prime (or more accurately, Diaclone Battle Convoy) was not designed by a single person, but rather a team of Takara designers as the one who was originally assigned the job had fallen behind. It is said that a young Shoji Kawamori was also a member of this team at some point, who would design THS-02 Convoy over 20 years later. The patent for the toy, however, lists Hiroyuki Obara as the designer.
The Heroes of Cybertron PVC figurine line is an adaptation by Hasbro of Takara's own Super Figure Collection line. The main differences between the two lines is that Hasbro cast Autobot and Decepticon figures in clear blue or clear red PVC respectively, then completely painted the figurines. This allowed the eyes to 'glow' when placed in front of the light source.
As the Autobots were having trouble with Rumble, Optimus Prime told them try to use his earthquakes to their advantage, which led to the end of the Decepticon. Prime subsequently ordered the Aerialbots to combine and save Grimlock and Roadblock from falling off a cliff. Wolves As they got closer to the Cobra Terrordrome, however, Prime started regretting getting the Autobots involved with the humans' war. He offered to carry G.I. Joe across the water separating them from the Terrordrome, but told them that Autobots only fight if they have no choice, and they had no reason to fight anymore. Moments later, he saw that Cobra were using innocent prisoners as human shields, and Duke added that anyone who Cobra didn't enslave, they murdered. Filled with righteous anger, Optimus Prime ordered his troops to roll out. Trenches
An absolutely incredible 28 seasons in, The Simpsons writers and producers have had to be unbelievably creative in coming up with a new couch gag for more than 600 episodes. They’ve had a doppleganger Simpsons family walk in on the family, the whole town has absurdly squeezed into their living room, and we’ve toured the inner workings of Homer’s body.
This exclusive redeco of Optimus Prime features darker shades of red and blue than his other releases and has extensive paint applications to resemble his on-screen appearances in The Last Knight, particularly his Nemesis Prime alter ego seen in the film. To that end, he features movie-accurate flame patterns, which are larger and more elaborate then the ones on the regular release or the SDCC exclusive, on his vehicle mode exterior and robot pectoral armor. His eyes and sword are also painted metallic purple, but his shield is completely unpainted for some reason.
Hot Rod then fought in the battle of Autobot City and saved the city for if he had not attacked Megatron, he would have destroyed it. Due to his attempted intervention in the epic battle between the Autobot leader, Optimus Prime and the Decepticon leader, Megatron, Prime was lethally injured. Before he died, the Matrix got passed on to the Autobot Ultra Magnus, whom he referred to as "old friend", despite protestations.