The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
With this reconstruction, Orion Pax became Optimus Prime, the first of the Autobot warriors. Optimus took the mantle of leadership as the civil war against the Decepticons erupted, and would remain in that position for the next nine million years. Ariel was rebuilt into Elita One, the commander of the Autobot resistance on Cybertron. The fate of Dion is left unrevealed. It has been speculated by fans that Dion might have become Ironhide or Ultra Magnus just as Orion and Ariel became Optimus and Elita, but this remains fan speculation only, and, his close friendship with Optimus notwithstanding, there is no evidence to support the idea.
The voice actor drama was written for OFTCC 2004 by Simon Furman, set after the events in the comics. Among those taken from their world via teleportation beam by Unicron and his Decepticon minions were Spy Changers Optimus Prime, Prowl, Ultra Magnus, and Ironhide. The Autobot forces opposing Unicron attempted to deflect a beam, leaving them all trapped on an uninhabited ice-world. The Autobot forces teamed up to overcome the Decepticons led by Reptilion. The Autobots were then, presumably, returned to their own worlds.
Nonetheless, I remain a big fan of Lego and although I think they have somewhat moved away from their roots with the excess of licensed products (and the earlier licensed products were, in my opinion, not very good because they contained too many specialized non-generic pieces that weren’t useful for generic building. But that situation is improved and in particular we have found the Star Wars sets to be of most value for generic building, because they generally have very few really specialized pieces (although to be fair the sets are most useful for building other spaceships, etc).
The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.
The first release in the Asian-exclusive Asia Premium Series toyline is an extensive redeco of the previously-Japanese exclusive Striker Optimus. He features a comprehensive paint scheme directly based on Jetpower Optimus Prime, with blue pinstriped flames, lots of silver paint, and vacuum metallized parts, although his hands are left unpainted in favor of painting his mirrors silver. Along with his standard accessories, he also comes with 2 battle blades, which were previously exclusive to Toys"R"Us Japan. He features the "We must stop the Decepticons!" voice chip, but batteries are not included. Rather helpfully, his instructions are supplemented with text instructions written in English for all the steps, as well as the additional photographs used for the previous Striker Optimus toy.
The 1992 and 1993 European and Canadian releases make up what is often called "Generation 1.5", much to the annoyance of many UK fans. These toys are similar in design to the Generation 2 Transformers, having lightpipe eyes, and pastel colors. The 1993 European figures used the G2 faction symbols which Hasbro UK designed because their licence on the G1 symbols had expired. The 1993 figures were repackaged for European G2 release in 1994, and three subgroup molds got used in the US G2 line.
This, of course, is all secondary to the main draw of the figure: it pulls an all-white trailer, which transforms into a working iPod speaker dock by rotating a substantial wedge of its full length 90 degrees . The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer. Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor with advice from an electronics specialty shop is recommended.
The problem there is that Star Wars took over the Space theme and Harry Potter took over the Castle theme. Just keeping up with the kids- sign of the times. What’s a castle lover to do? Compare 6075 (Castle) with (7094 Kings Castle Siege) and 4757 (Hogwarts) and they all have their own fantastic attributes. Sell the Harry minifigs and buy some crownies- problem solved.
In Titan Magazines' UK Transformers magazine, a comic strip on Optimus Prime, written by Simon Furman, would reveal where he was during the events of Movie Prequel #1. As he carries out his fateful plan to send the Allspark into space, the Autobot base is attacked by one of Megatron's drones with specific orders to kill him. As it locates the Allspark, Prime does the only thing he could think of to prevent it from transmitting its location to Megatron. He transforms into protoform mode and physically rams through it. Recovering in time to see the Allspark blast off, Prime is granted a vision of their war on Earth.
Partially constructed of die-cast metal, this small three inch figurine of Optimus Prime has a CGI-accurate sculpt compared to the larger toys, owing to the fact it does not need to transform at all. He is sculpted with his Ion Blaster in his right fist, and is articulated at the neck, shoulders and waist. He comes with a small movie-style Autobot sigil display stand.
The use of a G1-based Orion Pax design and an Aligned-based Optimus Prime design with Movie Optimus Prime packaging art makes it hard to know where on the wiki this should go, but given the general movie-themed bent of the Tribute line, we're putting it here. Continuing the tradition, the 2-pack was first released in some Asian countries like Taiwan without any prior announcement from Hasbro itself. A few months after the 2-pack's release, Tribute Optimus Prime & Orion Pax saw worldwide release through Amazon, including an Amazon Japan listing bearing a The Last Knight ID number.
TakaraTomy released another reissue based on the Encore version as part of their Chronicle line in 2011, lacking the original Generation 1 trailer. Instead, the Chronicle version was available in a two-pack with Dark of the Moon Deluxe Class Optimus Prime and a new trailer that could be used by both Optimuses, thanks to a retooled trailer hitch on the Generation 1 Optimus Prime figure.
Bumblebee may be beloved, but so is Optimus Prime and writers have seemingly killed off Optimus a million times in different continuities. So it can’t be too much of a surprise to know that Bee has met his maker on a few occasions as well. In the “Dark Cybertron” storyline of the IDW Generation 1 continuity, Decepticon Shockwave goes mad with power and wants to destroy all Autobots and Decepticons. In the process, Shockwave kills Bumblebee and sets off a chain of events that leads to retribution against Shockwave.
Available exclusively at Toys "R" Us, Rodimus transforms into a futuristic car that is a homage to the vehicle mode of Generation 1 Hot Rod. A panel on the car's hood, which is also the figure's chest, can be flipped to either show an engine block or the figure's Autobot insignia. The figure comes with an Energy Bow, capable of firing two missiles. His bow can also be tabbed to the roof of his car mode or snapped on his hand. The tabs that secure his bow in vehicle mode are 5mm wide, making it usable by other figures as well. His legs are normally bent for the underside of his car mode but can be locked straight during transformation.
Released in conjunction with Japanese cellphone maker au, au x Transformers INFOBAR Optimus Prime celebrates 15 years since the 2002 au Design Project that resulted in the INFOBAR cellphone, as well as the 10th anniversary of the live-action films. He transforms into a (non-functional) scaled-down replica of the 2002 au INFOBAR, and in lieu of cellphone functions, the figure can be paired via Bluetooth with a smartphone, such as an iPhone, to act as a notification alarm in either robot or INFOBAR mode. The screen is also non-functional, but pre-printed cards are included which can be slid into the screen to show an Autobot logo, Decepticon logo, a mockup of a cellphone home screen, or a technical "Transformers INFOBAR" design. The figure also includes a display stand.
The figure's transformation scheme is based on the original G1 figure, the only differences being that the fists are not removed but become the headlights, and instead of flipping backwards inside the chest, Diablock Convoy's noggin flips forwards with the aid of sideways-opening windows, akin to Masterpiece Prime. A "laser rifle" in the shape of his ion cannon can be built from black bricks, and stickers bearing the Autobot faction symbol can be placed on Diablock Convoy's shoulders, although this is not recommended as it is designed to permanently stick to multiple tiles which dislodge easily and may damage the sticker.
Arms Master Optimus's "Space Blaster Mode" is a mode designed for fighting in outer space, introduced in the Cybertron Satellite segment of "Infinite Transformation! Multiplying Enemies". He wears R.A. and Shining R.A. on his shoulders as wings, C.L. and C.L. GR on his back as thrusters, and B.H. and B.H. B on his feet as... more thrusters. His weapon of choice in this mode is the Matrix Blaster.
Limited to 10 pieces, this gold chrome redeco of Evasion Mode Optimus Prime is released as part of the Transformers Battle Command Campaign given away to ten winners via a lucky draw. The initial phase for entry was operated in July 2014, when those wishing to enter the draw had to mail in the proof of purchase from the Takara-Tomy Lost Age Optimus Prime. The actual mailing out of prizes was to take place in November 2014.
Minor note: Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
The line was released as "The Transformers" in the United States, Canada and the UK in 1984 (One year after the Gobots) but Takara was still marketing Diaclone at least during 1984. Hence in Japan "The Transformers" did not debut under that brand till 1985, when the line was also rolled out to the majority of the rest of the world between Takara and Hasbro. Hasbro Europe still will not accept, however, that the range was released in the UK in 1984, not even with evidence such as Argos 1984 catalogues containing the range, the UK comic launching in September 1984 or even the 1984 Transformers product catalogue produced by "Hasbro Industries (UK) Ltd, Wokingham". It is thought that Hasbro Europe as it now stands did not come into existence till 1985, hence no records of Transformers sales in 1984. UK Transformers toys were sold in boxes identical to those of their American counterparts until around 1998/9 when the range started to have UK exclusives.
1. Color diversity: Back in the 80s, most sets were comprised of a few basic colors; red, blue, yellow, white, gray, and black. It was much easier to acquire a “critical mass” of pieces in each color to start building one’s own creations in coherent color schemes. Space, Town, Castle sets all had the same basic colors. Today Lego uses a much wider array of colors in their sets. While this adds a lot of variety and visual appeal to today’s sets, this means that one has to buy a much larger number of sets (or scour bricklink) to get achieve a workable critical mass of pieces in each color. After buying some of the modern sets, I end up with a few dark-blue or lime-green pieces that I don’t really have enough to much with other than use as accent colors. They end up in my misc color bin in the event I decide to build the set they originally came with or sell them off on bricklink.
A extensive retool of Lockdown, transforming into a Lamborghini Centenario. An exclusive to Walmart stores and part of the "Autobots Unite" subline, While almost the entire figure has been remolded, the lower legs and feet remain unchanged. The figure is overall a bit taller in stature than the base mold and includes extra steps in the transformation which further differentiate the two. Uncommon for deluxe class toys, the figure does not include any weapons or accessories.
In a break from tradition, Energon Optimus Prime's large mode resembled a configuration similar to Voltron or to the Super Sentai action figures. This design was unpopular with many fans due to design issues with the toy. The small robot's body was large in proportion to his arms and legs which made the figure appear fat, earning it the nickname "Fatimus Prime" or "Obese-imus Prime". The 4 vehicles that combined with the robot were small, lacking the intricate detail that made other toys in the line popular. Fans were also angered by early releases of this toy in which the head was molded with a mouth rather than the traditional face plate design. Later releases of the toy eliminated the visible mouth feature.
In 2002, 3H secured the official Transformers convention license as well as licenses to produce comic books and start a fan club. Optimus Prime appeared in Transformers Collectors Club comics, a comic released by 3H enterprises. In the comic, he is the same Optimus Prime from the Robots in Disguise continuity, but is taken to the Transformers: Universe reality.
Screen Rant is exclusively announcing that the Transformers brand will join the pop culture series of toys with figures from Star Wars and Marvel and you can get your first look below. Hasbro relaunched their Mighty Muggs line in January 2018 with by announcing plans for over 50 figures from Star Wars and Marvel, with each collectible figure including the new push-and-turn head feature that changes their facial expressions. And yes, this new feature applies to your favorite Cybertronians too!
Rodimus was seen in the season 3 "Transwarped" special, leading his team in defending a Space Bridge from Strika's "Team Chaar". His team was overwhelmed, and Rodimus is infected with Cosmic Rust, courtesy of Oil Slick, putting him out of commission. According to Derrick J. Wyatt, Rodimus is back on Cybertron de-rusting. He can later be seen on Cybertron cheering for Optimus Prime and his crew for defeating the Decepticons in "Endgame, Part II".
Excellent article. Especially for pointing out how different we remember things from ‘when we were kids.’ (I swear Optimus Prime was two feet tall!) My only criticism is linking to those two Brickset articles about supposed “quality decline”… the headlines are sensationalist and inflammatory, and a LEGO rep eventually replied to the spurious claims with information that deflates much of the (somewhat unfounded) criticism. Also the comments give me a headache. Otherwise great stuff!
The character Optimus Prime appears in the live action films Transformers, Transformers: Revenge of the Fallen, and Transformers: Dark of the Moon as the leader of the Autobots and one of the main protagonists of the three films. In these movies, Optimus Prime is able to transform into a conventional Peterbilt 379 cab, rather than the cab over design of his original Generation 1 body. In Transformers: Dark of the Moon, he regains his first generation trailer. Also straying from the G1 design, Prime's vehicle mode is now decorated with red flames painted onto a blue body à la Rodimus Prime, his Generation 1 successor. The reason for the change was due to Director Michael Bay's decree that mass displacement does not occur when they transform, requiring Optimus's vehicle form to have more mass to achieve the desired size in his robot form.
Cosmos warned Optimus about a fuel plant the Decepticons were building, so Optimus took the Dinobots in his trailer and, under the guise of having a delivery for Shockwave, invaded the construction site and defeated the Decepticons. After this victory, Optimus turned his gaze skywards, and thanked Cosmos for his contribution to the Autobot cause. The Autobot Spy in the Sky
Ugh. Hey, congrats to everyone who wanted this, but do we really need another MP Prime? MP-10 is fantastic as it is, and it certainly looks better than this. MP-10’s only problem for me was the faux grille. If they made a new MP Prime that looked good and didn’t use a faux grille, then I would be interested. Instead it looks like none of the front uses any real truck parts; even the chest windows look different from the truck windows!
The toy that would ultimately end up as the original Optimus Prime toy was originally released in August 1983 as No.17 Battle Convoy from Takara's Diaclone Car Robo toyline in Japan. In 1984, Joustra released their own version (still with Diaclone sticker on the trailer) as part of their Diaclone line in Europe, either simply called Truck (according to the pack-in catalog) or Diaclone (in the pack-in comic). It's possible that GiG also released a version called Camion Convoy as part of their Trasformer line in Italy, but to this day no packaged sample has surfaced.
Optimus was able to rally Autobot factions from across Cybertron to the cause and launch an all-out attack on Shockwave's fortress. He headed the assault himself, but broke rank when he saw the image of Shockwave blasting Ultra Magnus upon one of the many monitor screens planted around the Decepticon's headquarters. Optimus charged in to confront Shockwave, beating down all opposition along the way. Coming upon Shockwave's throne room, Prime was greeted by Ultra Magnus, who pointed him towards a secret passage through which Shockwave had absconded. Leaving his wounded brother to rest, Optimus barged into Shockwave's secret chambers, only to be overpowered and have the Matrix ripped from his chest. With it, Shockwave was finally able to activate Vector Sigma. Countdown to Extinction Stalling, Prime listened as Shockwave recounted the history of Cybertron, and eventually Ultra Magnus arrived, having recovered, to attack and defeat Shockwave. Prime and Grimlock helped him escape from the fortress as it crumbled to the ground. With Shockwave's defeat, the Autobots would now be able to start rebuilding Cybertron towards true peace... but Optimus remained troubled by Shockwave's motives; he recognized that Shockwave would not be urged to action by mere fancy. Optimus pondered what greater threat awaited Cybertron for Shockwave to so thoroughly plan for its arrival. Revelation The injuries Prime took in this conflict necessitated a prolonged restoration period in stasis. Both he and Ultra Magnus were tended to by Perceptor and Hoist as they recuperated. Generation 1 #0 Though Magnus recovered in due course, Optimus's systems had received a more severe shock due to the Matrix being forcefully removed from his frame. Thus, he needed additional time spent in recovery before he could reboot. Black Sunshine
As with other Dark of the Moon Activators toys, this Optimus Prime (released under the Robo Power subline) is a very simple one-step transformation toy. You simply slam him down on the big blue button on the back end of his truck mode and he transforms thanks to spring-loaded mechanisms. To transform him back, just slam him down again on the same blue button.
Optimus Prime can also combine with Leader-class Jetfire to form Jetpower Optimus Prime by slightly transforming his backpack and feet. Sadly, this takes away from his leg articulation, because otherwise he could never support the massive backpack he has in this mode. However, fans have created alternate configurations that increase leg articulation and movie-accuracy.
During the period between December 26 2010 and January 31 2011, Hasbro ran their "Supercharge Your Holidays" promotion: for every $20 spent on Hasbro-branded product, customers could receive a free, random product from a list provided by Hasbro. Among the items on the list was "Transformers Activator & Speed Stars Mini Vehicle". According to this discussion thread on Allspark.com, Rally Rumble Optimus Prime (as the figure is listed in the thread) was one of the figures distributed.
If Optimus ordered his troops to come to the humans’ aid, they found themselves taking part in a struggle in futility, as the entire town was near-weightless, meaning they couldn’t put the humans anywhere where they wouldn’t float away once more. Then, the Autobots heard Decepticons approaching. Helpless in their current position, the Autobots were quickly eradicated by the Decepticons.
Being a Combiner Wars Voyager, Prime is naturally capable of transforming into a torso mode to combine with any 4 Deluxe Class Combiner Wars-style toys, though his packaging call-out has him form Ultra Prime by combining him with Deluxe Class Skydive and Alpha Bravo as the arms, and with Firefly and Decepticon Drag Strip as the legs. He can combine with Sunstreaker, Mirage, Prowl, and Ironhide if one wishes to have an IDW-accurate Optimus Maximus.
After many battles on Earth, Optimus died by standing purposefully in the path of the Hydra-Cannon built by Megatron from the three Mini-Con weapons, the Star Saber, the Skyboom Shield, and the Requiem Blaster. He managed to partially reflect the beam, damaging the Hydra-Cannon. It was the Mini-Cons themselves, however, who resurrected him, entering the Matrix and reconstructing a new body for him. Subsequently, Unicron forced Optimus to face the dark part of his soul and that, on some level, he enjoyed the thrill of combat. Following Unicron's defeat, Optimus's denial was sorely tested as Galvatron, an upgraded Megatron, forced him into one final furious battle. The battle ended when Starscream sacrificed himself to end the circle of hate that powered Unicron. Floating through space, Optimus found the Matrix, but said he did not deserve it. Before beginning the battle with Galvatron, he was upgraded by the minicons. His red torso turned black and he was able to battle Galvatron one on one.
His original trailer is not included with the set; instead, he comes with a new deluxe-scaled trailer, not available with any other figure, based on the one towed by Prime in Dark of the Moon. The trailer is compatible with both figures, and sports 5mm post-holes that will hold (among many other things) G1 Prime's laser rifle and the MechTech weapon Movie Prime is armed with.
A retool of Crash Combiner Optimus Prime available in a two-pack with Grimlock, featuring a new Optimus Prime-ish Combiner head and new arm parts with a green dinosaur-themed front shoulder pads, and he features a lighter shade of red plastic. Like the previous versions, Optimus Prime can become the top half of any Crash Combiner gestalt, though his official combination is with Grimlock as Primelock.
This is a weird one. Back in the late-’80s, the original TV show had ended and Marvel Comics decided to take the “transform” part of the property a step further and gave a handful of Transformers an organic, human-looking shell. Bumblebee was one of the lucky Autobots to get one. According to the storyline, the Decepticons developed the technology first, but the Autobots secretly caught wind, made their own human shells, and fooled the bad guys into thinking they were fighting mere humans, until they burst out of their shells.
Available exclusively from Japanese clothing company A Bathing Ape in April 2012, "Convoy Reissue BAPE Ver. BLACK" (コンボイ復刻版 BAPE® Ver. BLACK) is a redeco of the original Optimus Prime toy sporting a unique new grey color scheme, along with a grey trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese packaging.