LEGO is not ignoring the lower priced market, however. As we can see from the chart below, the average price of a set of LEGO has been relatively stable since the 80s2. Even with the average piece count of sets increasing over time, the average price has remained stable. This shows that for all the larger expensive sets being released, they are also releasing plenty of average priced sets that balance out the average. Not only has the size of sets increased but so has the number of sets released per year (prices are in US dollars).
Seibertron member, carytheone, has directed us to CarScoops.com, which has revealed that General Motors are to be auctioning off four of its Transformers Movie Camaros from Transformers: Revenge of the Fallen, Transformers: Dark of the Moon, Transformers: Age of Extinction and Transformers: The Last Knight. The car itself was as much of a star as the Transformers themselves and even the actors, so the interest is bound to be high. These are surely the auctions for “big bucks” Car - Read More
The centerpiece of the power-up robot mode is Prime's gigantic Ultimax Super Cannon, an electronic light-and-sound weapon the size and mass of a Deluxe figure. The whole cannon attaches to a special socket slightly behind Prime's shoulders, can store on the back or flip over to be gripped in both fists in armor mode, or stored upside-down underneath the trailer in truck mode. When pointed forward, the cannon has a larger helmet styled after Prime's own with a large translucent face shield featuring a painted targeting system. The weapon has three electronic modes: each of two small buttons plays its own weapon-firing noise and flashes one set of lights, while the large pull-switch in the cannon's center plays the sounds of a powerful barrage, flashing both sets of lights and (every third time) finishing off with the declaration "I am Optimus Prime". The Ultimax Super Cannon also has two of its own 5mm ports for even more MechTech firepower. When mounted on his back, the Cannon has two hook-like sections that securely lock into the "backpack", allowing the Ultimax weapon to serve as a handle for Optimus' imaginary "flight" operations.
Released as part of a new line called Transformers: Tribute, Orion Pax is a redeco of Titans Return Sergeant Kup, and transforms from a red-and-blue Cybertronic pickup truck which is also an homage to Generation 1 Crosshairs's vehicle mode G1 Optimus's e-HOBBY toy. His Titan Master, retooled from Flintlock, features a new face that is based on the Thrilling 30 Orion Pax toy. As a redeco of the Kup mold, Orion Pax still suffers the leg panel misassembly.
Part of the first wave of Prime: First Edition Voyager-Class toys, Optimus Prime transforms into a truck, with a similar (but more complex) transformation to his previous Deluxe-Class toy, and features a faux-kibble window-chest panel as well as a detailed truck cab interior. He comes with a "Cybertronian battle sword" and a "plasma cannon", either of which can peg into his hands. The cannon also features a 5mm peg-hole on the underside of its barrel, allowing the sword (or any other compatible accessory) to mount there as a bayonet. They are stored in vehicle mode by pegging them onto either the 5mm-compatible trailer hitch, or onto each peg-hole beside it, although the instructions tell you to peg the sword facing forwards onto the hitch, with the cannon mounting backwards onto one of the side pegs. His trailer hitch ends up on his right robot leg, and he has a fake, sculpted, equally-usable trailer hitch on his left leg. He features a cardboard stand as with all "First Edition" toys, but the weak adhesive used for its flaps mean it often has trouble supporting the weight of a Voyager class figure for an extended amount of time, the top caving in as the glue gives way.
Prime's trailer opens up into his Combat Deck, containing the scout drone, Roller. The interior of the Combat Deck features three pegs that can accommodate Prime's laser rifle, fuel pump and nozzle accessories, and seating for two Diaclone drivers. As its central feature, the Combat Deck features a missile-armed repair drone pod mounted upon a boom lift arm (featuring another cockpit for a Diaclone driver), which can also be extended through holes in the trailer's roof and front-end when it is closed. Situated in the base of the boom arm is a spring-loaded launcher that can launch Roller out of the Combat Deck and into action. Roller himself has seating for four Diaclone passengers, and features a port that can accommodate either Prime's rifle or the fuel pump. The interior space of the trailer allows storage room for one standard Autobot car, which can also be shot forward by the launcher.
The original Optimus Prime toy, as well as the Diaclone Battle Convoy toy that it was based based upon, transforms into a late 1970s red Freightliner FL86 Cab-over-Engine triple-axle semi trailer truck. The truck mode features rubber tires, and the cab is partially constructed of die cast metal. The windscreen section can open to reveal ultimately-unused seats that were originally designed for Diaclone's driver figures.
This version of Ultimate Class Beast Hunter Optimus Prime is exclusive to Cybertron Con 2013. While Prime itself is unchanged, he has been packaged in the box with his backpack plugged into his back, allowing the cannons to rotate when his spiky stomach-fenders are pushed down. The box itself also has slightly different text and graphical layouts, is encased in a large, slip-on outer covering, and features a designated number as part of the Thrilling 30 line.
Prime's new trailer is essentially a heavily armed version of the original, with two double-barreled heavy laser cannons mounted on two arms with visible fists. The rear has a fold-down ramp to allow the storage of a smaller transformer, or perhaps spare accessories. The trailer can be transformed into a Powermaster battlestation that can allow other Powermaster engine figures to man the heavy laser cannons.
On another plane of existence, Optimus travelled the path to the Matrix, guided by the voice of his old mentor Alpha Trion. The path led him to Grimlock, who had also been killed by Megatron; Prime rescued Grimlock from Kremzeek, the demonic eater of souls. At the gateway to the great beyond, they encountered Bludgeon, who announced that only those who bore the "key to Vector Stigmata" may pass through. Prime realized that the wounds on his body form the key, but the angel insisted that these would grant Prime access. Prime took Grimlock's sword and bestowed the key on Grimlock, allowing the former Autobot King to ascend into the Matrix while Prime stayed behind. Transformers vs. G.I. Joe #12
This Cybertron spin pop consists of a generic handle with an Optimus Prime sticker, topped with a figurine of Prime through which the included lollipop slots. When the handle is squeezed, a manual gear mechanism spins both the figure and lollipop—no batteries necessary! The handle was also redecoed in orange for a Megatron spin pop, with a figure of the Decepticon leader on top.

While the other Autobots searched for the Matrix on Earth, Optimus Prime searched for Vector Sigma, guided through the dangers of the planet's catacombs by the spirit of Alpha Trion. Prime eventually arrived at the computer, only to find his way barred by Cyclonus and Scourge. At that moment, Hot Rod arrived with the Matrix, the same with which Alpha Trion merged, re-energizing it. The Matrix transformed Hot Rod back into Rodimus Prime and, for the first time, the two Primes fought side-by-side and defeated Galvatron.

When the Decepticons tried to take control of a solar energy station, Prime sent Roller in to investigate. Megatron's Fight for Power Later, Prime sent Bumblebee to spy on the Decepticons' latest misdeeds, and the Autobots discovered that they were having trouble with the ion drive of their starship. Prime led the Autobots in an attack on the mine the Decepticons were using to test their propulsion system and routed Megatron's force. Autobots Fight Back
He now comes with a half-translucent gun which lights up and expands MechTech-style when the lever is pulled. Bizarrely, the main section of the weapon is sculpted to resemble Prime's forearm, with the unfolding part being his in-show gun. Additionally, he comes with an opaque sword resembling the Star Saber, which he can wield two-handed. The gun features a peg on its underside and a port on each side, while the sword features a peg and peg-hole on its hilt in addition to its 5mm handle. In robot mode, either accessory can mount on his hands, on either of his shoulders, or be pegged into either of his half-translucent forearms. In vehicle mode, the top of the vehicle mode cab can also fold back to reveal two additional peg holes, and there are three peg holes (including the fifth wheel hitch) on the back section, although the hitch tends to open up and not hold very well.

As one of the first Transform Jr toys, this version of Optimus Prime was released under the early name for the series, Transform Gōkin. As a smaller, simplified version of the original Generation 1 Prime figure intended as a low-cost alternative for younger children, Prime features a similar transformation, with a removable head in addition to fists, but lacks rubber tires and translucent windows. As with most other Transform Jr figures, he lacked any of his major accessories, coming only with his rifle and a cardboard replacement for his trailer that had to be assembled by the buyer.
In a later scene, Hot Rod fled the city with Kup and the Dinobots when Galvatron, a recreated Megatron, attacked the city again, this time only smaller, after being reformatted by Unicron and taking revenge on Starscream. After meeting up with the other Autobots after a series of adventures on the planets Quintessa and Junk, Hot Rod returned to the other Autobots and rushed to Cybertron to save it from being eaten by Unicron. Facing Galvatron inside Unicron's body, Hot Rod was able to get his hands on the Autobot Matrix of Leadership in the confrontation, as the voice of Optimus Prime was heard saying, "Arise, Rodimus Prime". The power of the Matrix reformatted Hot Rod into Rodimus Prime, maturing him, giving him a larger body, deeper voice, and different vehicle mode. It also destroyed Unicron's body, bringing the events of the film to a close with Rodimus Prime as the new Autobot leader.
As the battle wore on, Optimus attempted to drive the Autobots too wounded to outrun the Beast themselves to safety, carrying them within his trailer. Jetfire showed up in time to rescue most of his passengers, leaving Optimus to deal with The Beast on his own. Seeing a city coming closer over the horizon, Optimus attempted to reach the Dinobots one last time from within The Beast. As his former troops remained unresponsive, Optimus led The Beast to its doom, blasting it a few more times before leading it to fall into a chasm. Optimus himself was rescued from the fall at the last possible moment by Jetfire’s timely return. As the two of them looked on at the Beast’s inert form, Optimus wondered out loud if their battles would truly ever come to an end. The Beast Within Part 2, Consequences
A second die-cast vehicle representing Prime was also part of the Mini Car Collection, this one a red redeco of Majorette toy #291, a Chevrolet K-10 pick-up. To distinguish it from the other Optimus vehicle, this one is randomly allocated the "Super Mode" label, and features an image of the leader in his powered-up form on is hood in addition to the Autobot symbol and series logo.
This figure suffers from a design flaw, in that his knee joint pegs are slightly too big for their sockets, and that the resulting connection is so tight that it makes the sockets form stress marks and eventually crack, or even cracking during assembly. The problem can be remedied by simply sanding down the pegs prior to sliding the legs onto the peg.
Another thing different now from when I was a kid (70s/80s) is that the sets contain much fewer basic bricks. It seems the models are made out of all these exotic specialized pieces which are less useful for general building. Is this a business strategy to sell more sets by reducing the reusability, a marketing ploy to sell more pieces by making every set include unique collectable parts, or just trying to make the models look more realistic/slick? I think Lego was more fun when the majority of bricks were basic.

When Sideswipe was accused and convicted of destroying the Nova Suspension Bridge, Optimus was infuriated that one of his own Autobots could commit such a heinous act. Optimus was tasked to hunt down and deactivate Sideswipe, though the task proved to be easy as Sideswipe did not run, hide or resist. After Optimus had deactivated Sideswipe, he was approached by Prowl, who pointed out that Sideswipe's actions made little sense, as he had committed the crime in broad daylight before many witnesses. Agreeing that the Decepticons might be behind the situation, Optimus allowed Prowl to take a team of Autobots to Carob Island to clear Sideswipe's name while Optimus and Jazz stayed behind to continue working on human/Autobot relations. Prowl returned with evidence that it was indeed a Decepticon-controlled clone of Sideswipe that had committed the crime. Optimus then presumably reactivated Sideswipe when his name was cleared. Deadly Paradise


He does not come with his Mini-Con partner Over-Run in this release; instead, Optimus Prime and his wave-mate Demolishor debuted a new brand of Cyber Key: retooled from the standard Cybertron style key, this version lacked a sculpted insignia, so that any symbol could be tampographed on to it, and featured a Mini-Con-style Powerlinx socket on the back, allowing it to operate the figure's formerly-Mini-Con-activated "punching" feature without the figure itself having to be retooled.
This retool of Revenge of the Fallen Leader-Class Optimus Prime features the head from Buster Optimus Prime and has had his blades replaced with semi-articulated Battle Hooks for face-destroying action! He has a darker paint job and sports black splotches on his body and head to signify battle damage. However, due to these extra "battle damage" paint applications, some other paint applications that were present on the Revenge of the Fallen release were omitted. He also sports a new voice box in robot mode, replacing the infamous "I am Optimus Prime!" with "We must stop the Decepticons!" The international release, however, retains the same abbreviated "Optimus Prime" sound clip as the original release. To the annoyance of many fans, this version was the main version released just about anywhere outside the United States (all of Canada, Latin America, Europe, and Asia). The box also mentions racing sounds, which may or may not be referring to the button-activated diesel engine noises carried over from the Revenge of the Fallen version of the figure.
When a two-part race was being held with a massive supply of oil and gasoline as the prize, both the Decepticons and the Autobots badly wanted to win it. Megatron entered the race by hiding himself inside a hollowed-out car and harassed Cliffjumper all throughout the contest. When Prime discovered the car was being driven by his arch foe, he swiftly pulled a telephone pole out from the ground and used it to bash the mortal hell out of the cheating Decepticon. Thanks to Prime's violent intervention, Cliffjumper was able to win the race. Afterward, Optimus Prime celebrated the Minibot's victory with a gargantuan smile as all the Decepticons starved to death. The Great Car Rally
The second War Within Optimus Prime toy in the Titanium series, but also the first official transforming toy from the War Within series. Personally designed by comic artist Don Figueroa (who created much of the War Within comic designs), Optimus Prime transforms into a Cybertronic truck. He is armed with a silver painted Ion blaster, on which the word "DON" can be clearly seen sculpted into the body.
Distant Thunder was ultimately unsuccessful, but as the universe started to rip apart, a black Optimus Prime clone appeared. The Binaltech universe was split into its own separate continuity, while the original timeline was also restored, stabilizing the multiverse. The clone, friendly to the transformers, proclaimed that the Binaltech universe must be allowed to continue, as it was important to the future. Optimus Prime questioned the black doppelganger, who explained only that he carried "the Protector's" spark, but refused to reveal any more detailed information. Soon after, the clone, who was originally developed by Dr. Archeville as a weapon of evil, ejected the spark that had invaded and taken over the black figure, reverting to its original evil programming. The malevolent Nemesis Prime, no longer just a black version of Optimus, escaped.

The figure features newly redesigned hip ratchets to make both robot and combiner mode stable, which were also installed in both TakaraTomy's Motormaster, Grand Scourge, and a revision wave of Hasbro's Motormaster. The pegs that Legends Class Rodimus (or Blackjack) attach to have also been slightly modified to provide a tighter fit, making the latter toy much less prone to falling out.

The original Optimus Prime toy, as well as the Diaclone Battle Convoy toy that it was based based upon, transforms into a late 1970s red Freightliner FL86 Cab-over-Engine triple-axle semi trailer truck. The truck mode features rubber tires, and the cab is partially constructed of die cast metal. The windscreen section can open to reveal ultimately-unused seats that were originally designed for Diaclone's driver figures.

In Spotlight: Doubledealer, Hot Rod's search was interrupted by Dealer's arrival on Earth, with orders for Hot Rod: find the Magnificence and use it to learn what they could about the Expansion. Hot Rod took Dealer to his hiding spot, which turned out to be the planet where they first found the device. As Dealer and Hot Rod closed on the Magnificence, he went over his first visit to the planet in his mind, and how things could have gone so wrong. Eventually he began to have suspicions, and upon locating the Magnificence, asked it the question that haunted him: had Dealer betrayed him? Sadly, it revealed the truth, and Hot Rod was forced to kill Dealer as the traitor attacked. Looking down on his remains, Hot Rod realized the truth had been staring him in the face, he just had not wanted to accept it. He then used the Magnificence to find out all he could about the Expansion, and relayed the information to the Autobots.


In an alternate version of this reality, Rodimus was forced to deal with a militant and aggressive Optimus Prime, and Cybertron was soon wracked by a three-way war between Optimus' Autobots, Rodimus' Omnicons, and Megatron's Decepticons. Unfortunately, the balance of the conflict tipped with the arrival of dimension-hopping tyrant Megazarak, whose Destructicons allied with the Decepticons, creating a force that soon annihilated Autobot and Omnicon alike. However, the Destructicons then turned upon their allies and destroyed them before being abducted by Unicron. This universe was then drained of all life and energy by Tornedron, whose creator Primacron was also destroyed.
Surprisingly, this was also the first Hasbro exclusive transforming Movie Optimus Prime figure to be based on the final design seen in Age of Extinction. He even features the forearms that Prime had before obtaining the Sword of Judgement, which unfortunately means that he is inaccurate to his appearance in the battle of Hong Kong and the entirety of The Last Knight. The sword's blade is still painted as the heated-up version from the concept art.
My 6 year old son has recently gotten into the classic transformers. He has asked for an original Optimus Prime for Christmas. I can’t bring myself to spend the money on an original 1984 model, but would like to know if the reissues from China (sample in the link) are quality products. I’m not looking for a masterpiece, but i don’t want something that will fall apart within a month or so. Thanks in advance for the helpOptimus Prime
The morning after a particularly vicious battle, Optimus listened to birdsong and pondered life as a giant robot, before asking Ratchet and Huffer for a damage report. The Autobots were puzzled when the Decepticon Seekers (and Laserbeak and Buzzsaw) did a flyby on their camp, as the Decepticons were similarly damaged after the battle, but Shooting Star reported that the Decepticons were trying to distract them while an attempt was made to secure a broken-down oil truck a few miles away. Optimus took a small group to investigate, and successfully aided the humans in getting their truck moving. Swoop was instrumental in stopping the Decepticon attack, and Optimus commended the Dinobot for his valor. Decepticon Hijack
If Sparkplug suggested that the Autobots not worry about subtlety, the entire squad transformed and began prowling the streets in search of Decepticons. Oblivious to the panic they were causing, Optimus assumed that the Decepticons were spotted nearby when a police officer declared that the city was under siege by giant robots. Unable to restore order in time to halt the Decepticons’ plot, Optimus and the rest of his team were destroyed in the ensuing earthquake.
There is one aspect not looked at in the price and that is the shift to model building vs. creation leading to a change in the utility of the pieces. I seem to need many more sets to get a useful variety of pieces these days as many of the sets contain a lot of pieces that are very specific to the needs of the set and are less useful when one wants to create their own designs. It would be a fascinating addition to rate each of the block types on its utility, perhaps by its prevalence in other sets, and then assess each set on its total utility score. So then the question is how many sets would you need to by to achieve different levels of utility and how has this changed over time.
However, the situation was still so desperate that Optimus not only decided to recruit human allies The battle is far from over!, but aggressively tried to recruit and deputise human children, including giving them the power to co-ordinate Autobot teams in battles. He wouldn't even make a final move on the Decepticons until he had enough child soldiers on his side. Earthlings: THE S.T.A.R.S. need your help now! Have the Decepticons defeated us once and for all? In at least one case, this likely led to the death of a small boy at Decepticon hands. Can one boy, alone, hold back the evil Decepticons?
In the first nexus, when Swoop reported back to Autobot HQ that the other Dinobots were being controlled by Bombshell's cerebro-shells, Optimus had to decide whether to stop them with an immediate full-scale assault, or consult the Ark's computer. If he led an immediate attack, the cerebro-shells were jolted loose when his troops carried out his order to, "Bring them down fast and hard". If he consulted the computer, he then had to choose between its plan to have Windcharger remove the shells from a distance with his magnetic powers, or go with Mirage's idea to lure the Dinobots over Bandit's Bluff with an Optimus Prime hologram. If he chose Mirage's plan, the Dinobots charged over the cliff and into the ocean, where they were salvaged for repairs back at base. If he let Windcharger lead operations at the bluff so he could confer with Skids about some strange activity near Dolphin's Bay, it was out of his hands whether Windcharger accidentally tore the Dinobots to bits, or harmlessly removed the cerebro-shells. The latter outcome led to Grimlock telling Optimus that Bombshell said controlling them was just part of a larger plan, and the Autobot leader realized that it might tie in to Skids's report. Skids and Bumblebee could investigate in Wheeljack's new mini-sub, but should he send Sludge along with them?

Within G.I. Joe's headquarters, Optimus found Doctor Venom controlling a robotic suit made out of the remains of both Bumblebee and Soundwave. The battle between him and the Joes spilled out into the open and into another battle, where Decepticobra was attacking the United Nations. As more factions joined the brawl, Optimus yanked Bumblebee's components free from Soundwave's body and took to the skies, back to Cybertron. Expelled from the Garden There, he was able to reunite Bumblebee's body with his head. Headmasters

On Cybertron, Optimus Prime kicked back to do a little bit of paperwork and reminisce. With Shockwave defeated, Cybertron was enjoying a new era of peace. He was interrupted by Hot Rod, who reported that a group of "pesky humans with their peashooters" were giving an Autobot team on Earth a hard time. Prime suspected Cobra's involvement and counseled Hot Rod not to be so dismissive of the humans. The Art of War #1 When the team returned to Cybertron and mysteriously vanished in the Gladiator Zone, Prime was prepared to go search for them, but was convinced by Hot Rod to stay behind and organize a peace ceremony. The Art of War #2
The energy of the explosion absorbed by the virus, the Autobots dug themselves out and set about recovering their fellows whom Megatron had used to power the cyber-virus in its early stages. Ironhide passed on a message from Megatron — there was a surprise in store for the Autobot leader. Optimus and some Autobots including Superion sped to San Francisco, where Megatron had unleashed Devastator. As Prime battled Megatron, he took time to save three humans who were threatened by falling debris, only for the humans to turn on him. The defeat of Superion turned the tide of the battle against the Autobots. Prime Directive #4
Reissued in 2003 as part of Takara's Transformers Collection line of reissues. This version (#13 in the Collection series) was retooled from the 2000/2002 Rodimus Major tooling in order to make the fists and engine block hole wide enough to equip Firebolt. In addition, the original 2 guns had their posts modified so that a Targetmaster Hot Rod could still use them, if the owner chose to.
The DOTM packaging release of this 2-pack features an altered paint application on Optimus Prime's ion blaster/barrage cannon. On the original ROTF packaging release, the slide-out barrel on Prime's blaster is painted silver with a black paint spray app to simulate usage of the weapon, and the exposed inside wall of the gas tank at the top of the blaster is left as unpainted grey plastic (exactly like the blaster on the original single-boxed ROTF Buster Optimus Prime). After receiving numerous reports from customers that the silver paint on the slide-out barrel was easily scraped off by merely transforming it from gas tank to blaster, Takara-Tomy briefly stated in an interview that they had addressed the issue for the Dark of the Moon packaged version by swapping the placement of the silver paint application. Thus, the Dark of the Moon packaged version now features the slide-out barrel on Prime's blaster as unpainted grey plastic with an unchanged black paint spray app to simulate usage of the weapon, and the exposed inside wall of the gas tank at the top of the blaster is now painted silver.
The sequel series, Transformers: Generation 2, began an undisclosed period of time later. At the beginning of the series, Prime was restored to a form resembling his original body. He and the Transformers found themselves caught in the schemes of a new generation of Cybertronians, led by the icy Jhiaxus, who were colonizing and cyber-forming other worlds. Plagued by nightmarish visions of a life-destroying entity called "the Swarm", Prime looked into Cybertron's past and discovered that Jhiaxus and his kind were the result of an unintentional Transformer reproduction. Their nature and intent, he found, was distilled to the purest, most unemotional form of conquest and that the Swarm was the by-product of this process. To fight this new enemy, Prime and the Autobots entered into an alliance with the recreated Megatron's Decepticons. Though Prime was eventually consumed by the abomination and destroyed, he was able to unleash the energies of the Matrix into the Swarm, purifying it. In parting, the Swarm recreated Prime in a new form, and he and Megatron set out to lead the united Autobots and Decepticons into a new age.
As the two Titans battled, Optimus found Megatron watching the fight and demanded he assist them, but Megatron refused. When Trypticon swallowed the Enigma of Combination and took control of the Combiners, Optimus attempted to attack them as a distraction, but he was caught and the Combiners attempted to pull him apart. Optimus managed to break free of his captors and was further saved by the timely arrival of Megatron. Against Optimus's wishes, Perceptor returned and tricked Trypticon into swallowing the Matrix. Consumed However, this ultimately proved successful, and Trypticon released all that he had swallowed during the conflict before falling inert once again. The relief was short-lived, though, as Megatronus suddenly appeared before them, proving Optimus's fears. Optimus and Maximus attempted to surprise attack Megatronus, but he brushed off their blows and fired a beam through Optimus's chest, killing the Autobot once more. All Things Must Pass
Screen Rant is exclusively announcing that the Transformers brand will join the pop culture series of toys with figures from Star Wars and Marvel and you can get your first look below. Hasbro relaunched their Mighty Muggs line in January 2018 with by announcing plans for over 50 figures from Star Wars and Marvel, with each collectible figure including the new push-and-turn head feature that changes their facial expressions. And yes, this new feature applies to your favorite Cybertronians too!
On a Cybertron dominated by Shockwave and the Decepticons, Optimus Prime and the Autobots took on the roles of resistance fighters. Cobra experimentation transported a contingent of Cobras and G.I. Joes to Cybertron and destabilized Teletran 3, which led to the computer sending several Transformers to Earth across different time periods. When Optimus Prime saw Jazz get zapped by Teletran 3, he leapt to rescue his soldier, only to be transported away as well. G.I. Joe vs. the Transformers II #1 A team made up of Joes and Cobra agents were sent back and found Optimus Prime and the Stunticons in 1930s-era Chicago, disguised as period cars and trucks. The Stunticons chased Prime and the Joes around the city until everything was wrapped up with bullets, a collapsed bridge and some dynamite. G.I. Joe vs. the Transformers II #2
This figure was made available again, without any changes, in 2015, this time in new packaging resembling the then-concurrent packaging design for the Generations line, but replacing the name "Generations" with "Authentic Transformers". It was also given a new Hasbro product code number and UPC barcode, thereby technically making it a separate product. In 2017, it was re-released again, this time in a minor variant of the 2014 version's packaging (including the original product code number and barcode) that now lacked the reference to the non-existing "Reveal the Shield" gimmick.
For all the positive aspects, these changes are not without their drawbacks. The LEGO community has been crying foul over the perceived decline in quality of the bricks5. While nowhere as bad as their competitor, any decline in quality reflects poorly on a company known for quality control. The LEGO group has been expanding its manufacturing base to places outside of Denmark, into Mexico, the Czech Republic, and China (although so far it seems only their “signature brand” non-set items are made in China). LEGO claims that this has not changed their dedication to the quality of standards by which they abide. However, it seems that the molds have changed to reduce plastic6.  Whether or not this affects the durability of the bricks is yet to be seen.
Metalforce Prime was available in both a matte-paint "anime" version that more precisely echoed the colours of the actual series, and a metallic-paint version (pictured), which is less show-accurate but more shiny. The plain-colours version was the first release and has an Autobot symbol tampograph on his shoulder as per the cartoon, while the later metallic-finish version instead came with a decal sheet.
The new One-Step Optimus Prime toy transforms from a trailer truck into a robot in just one easy step! The toy features a similar transformation to the other One-Step Optimus Prime and One-Step Changer Movie Hound. The figure is only available as a "Special Edition Figure" in a 6-pack with the One-Step figures of Bumblebee, Steeljaw, Grimlock, Sideswipe, and Underbite, all of which are unchanged from their individual releases. This set was exclusive to Target stores in the United States and to Toys"R"Us stores in Canada.

During the three-part "One Shall Rise", Optimus uses the Matrix of Leadership to defeat Unicron. Unfortunately, in doing so, he not only emptied the wisdom of the Primes, but lost his own memories as a Prime, believing himself to be Orion Pax once again. Megatron took advantage of this to manipulate Orion into deciphering Iacon records the Decepticons have stolen from Cybertron. Eventually, Orion figures out the truth and escapes. Jack is later able to restore Optimus' memories after downloading the wisdom of the Primes from Vector Sigma into its key which Optimus gave him before he left to stop Unicron. However, Optimus could not recall the time he spend as a Decepticon.
Available exclusively from Japanese clothing company A Bathing Ape in March 2013, "Convoy Reissue BAPE VERSION RED CAMO" (コンボイ復刻版 BAPE® VERSION RED CAMO) is a redeco of the original Optimus Prime toy sporting a unique new red color scheme, along with a red trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese packaging.
×