Part of the new Adventure Shokugan series, this Optimus Prime is a transformable snap-fit kit molded in red, blue, and yellow plastic with detailing from stickers. The kit's transformation engineering is borrowed from the Warrior class figure. But unlike the said toy, the Axe must be pegged onto Prime's legs before transforming, and his shoulders are molded on his front truck halves/shoulders not being flipped down. Also, the stickers are used to cover the molded cavity on the front shoulders. As with Fixit & Underbite, Optimus Prime is fully transformable.
The TakaraTomy version of Premium Series Optimus Prime has a considerably different deco to Hasbro's release. Similar to the unique chrome Optimus Prime, Optimus Prime Battle Mode features vacuum-metallized parts for nearly all of the silver truck parts, for a greater resemblance to the polished chrome on the real prop trucks. Unfortunately, as his feet are the front fenders and grill, this will likely lead to chipping. In robot mode he retains several decos that were removed from Hasbro's Premium Optimus Prime for cost reasons, such as the blue and gold decos on his thighs. Finally, the flip-out energy sword is coloured gold to reflect its "powered up" appearance.
In 2017, the Jazz action figure from the "Power of the Primes" line featured printed in Cybertronian alphabet "MAGA", an acronym for the phrase "Make America Great Again" most notably associated with Donald Trump and Alt-right. A spokesperson for Hasbro responded to io9 about the issue and stated that it was inserted onto the figure by one of their vendors and would address it with them.
The Optimus Prime Kreon in this set is based on the character's rusty, crusty "evasion mode" from the Age of Extinction movie. He has a ferrous-metal backpack, which is used to interact with the magnetic parts in the various sets. In this specific set's case, it's so he can be grabbed by the buildable Strafe's dino-claws, once Strafe uses said claws to open up the "laser" cage made to contain Optimus. (Yeah, we know Strafe appears way after Optimus ditched this look in the movie.)
Optimus Exprime's electronics are slightly less complex than those of Kenzan and Gekisoumaru. In robot, dragon, and train modes, pressing a button sets off red flashing LEDs and causes him to play one of seven sounds or phrases (which do not change depending on the mode). Pressing and holding the button activates a combination mode similar to the ones found in Kenzan and Gekisoumaru. Optimus Exprime calls on Kenzan and Gekisoumaru to combine with him, and then combination music plays as the LEDs flash blue, purple, and red (with the two halves of his Autobot insignia showing different colors!). Completing either combination by snapping the correct kabuto helmet into place ends the combination mode and triggers another phrase.
The largest Action Master set, this incarnation of Optimus Prime is a non-transforming action figure which comes with the "Armored Convoy", a large, heavily armed tractor trailer. The cab of the truck transforms into a small jet that can seat one Action Master figure, while the trailer itself converts into a larger battle station with turrets that several Action Masters can man. The sculpt of the Prime figure itself is closely based on his character model, albeit with a coloration that seems to have been based at least partially on the small robot form of his Powermaster body.
Voyager Optimus Prime is a redeco of the toy from the first movie's toyline. Like several redecos or retools of 2007 movie toys, there has been some effort to make this release noticeably different from the previous releases, though the toy ends up looking less accurate to the actual movie appearance than those previous releases. Optimus Prime has a sort of faded Autobot logo on the side of the truck's bunk, and kanji (Chinese characters) on the roof (ending up on his knee in robot mode.) The word "上海将军" means "Shanghai General", while "大将" means "Grand general".
If you're still on the fence about Masterpiece MPM-5 Decepticon Barricade, or are considering purchasing Masterpiece MPM-6 Ironhide (which is also currently available), now might be a great chance to grab this Amazon.com exclusive figure from Hasbro. As of this writing, MPM-5 Barricade is currently on sale at Amazon.com for $52.13, which is 35% off the regular retail price of $79.99. Part of the special deal is that he's also available for "FREE" One-Day shipping for Amazon Prime members. Order - Read More
Optimus & Shreddicus were initially exclusive to San Diego Comic-Con 2017, where they sold out. A small portion of the run had been held for future sales: Hasbro Toy Shop put the set up for sale for about five minutes on August 14 before selling out. The remainder was available at HasCon 2017's exclusives booth, but again they burned through the stock very quickly.
Bumblebee may be beloved, but so is Optimus Prime and writers have seemingly killed off Optimus a million times in different continuities. So it can’t be too much of a surprise to know that Bee has met his maker on a few occasions as well. In the “Dark Cybertron” storyline of the IDW Generation 1 continuity, Decepticon Shockwave goes mad with power and wants to destroy all Autobots and Decepticons. In the process, Shockwave kills Bumblebee and sets off a chain of events that leads to retribution against Shockwave.
Smash & Change Optimus Prime is a simple figure that transforms by "smashing" the rear end of the truck/the robot's feet into the ground. He features only elbow articulation in robot mode, and includes a sword accessory that can be held in his hand or mounted on the side of his truck mode. The handle on the rear of his truck mode is molded to emulate his Vector Shield.
In April 2007, photos of a repainted Alternators Mirage, in a color scheme similar to Kiss Players Hot Rodimus, and in Alterators-style "fishbowl" packaging began to appear on the internet. Simply called Rodimus, the 27th Alternator lacks almost all of the Kiss Players accessories, including the fishing pole, but keeps the new head sculpt. This figure also sports the classic "flame" detailing in lieu of the Kiss Player's white stripes, while the vanity plate reads "TOO HOT". Rodimus was first sold as a convention exclusive at the 2007 San Diego Comic-Con. The Monday after the convention, it was made available on the Hasbro Toy Shop website, where it would sell out that same morning. The instructions present an alternate name for the figure: Rodimus Prime; whether this is merely an oversight is unknown.
The instruction manual for the MP-04S Convoy Sleep Version reveals a hidden message saying that Rodimus will be the next installment in the Masterpiece series. Concept sketches of the figure were released online in July 2010. The figure is a faithful modern recreation of the original G1 toy. Gimmicks include retractable binoculars, spinning saw blade and the Matrix of Leadership, but the figure's main feature is the ability to transform into both Hot Rod and Rodimus Prime. The transition between the two incarnations involves rotating the face, extending the legs and adjusting the spoiler on the back.
Exclusive to Walmart, this Deluxe Class Optimus Prime is an all-new mold, close in scale to Voyager Class Megatron. He has a high range of motion, with ball jointed shoulders and hips, swivels at the neck, knees, and feet, and double swivels in the elbows. As a result of the transformation process, he can also rotate at the waist, though this is hindered considerably by his "backpack" kibble. This can be remedied by pointing the truck nose downward, as it is in the packaging. Optimus Prime also features the spring loaded "Automorph" feature in his head, if the truck kibble pushes the small grey switch from his back before splitting the chest into half.
Optimus was providing cover-fire for a cross-universal battle when he suddenly seized up. Though he rebooted momentarily, he had terrible news for his Protector allies: using the power of the lower-dimensional Planicrons, Megatron had succeeded in sundering the Alternity's aggregate! Optimus urged his subordinates to not lose hope however, reassuring them that events were still unfolding within the parameters they had foretold. Sure enough, the battle swayed back in the Autobots' favor when Thundercracker, disgusted by Megatron's reckless use of their power, freed the Planicrons and robbed Megatron of his most powerful weapon. Optimus then tasked Elita Seven, the black Convoy, and Bumblebee to track down the doorway that would allow the Planicrons to ascend to the higher-dimensions, putting them on the path to supersede the Alternity as multiversal protectors. While they attended to this task, the rest of the now-former Alternity busied themselves by destroying Megatron's auto-avatars, weakening the villain and disallowing him from interfering further with the Planicrons' destiny.
After the Decepticons declared war, junior officer Optimus managed to turn the tide against them in a battle over Iacon, and rose up in rank to become Autobot leader. Optimus Prime's The Official Transformers: Generation 2 Annual profile His second-in-command, Jazz, once saved his life after a surprise attack rendered him him temporarily non-functional on the battlefront. Jazz's The Official Transformers: Generation 2 Annual profile The war raged for centuries, with Cybertron's fuel sources steadily decreasing. Optimus ordered the construction of the Ark to seek out new sources of energy, unaware that Megatron was building a ship of his own. The Ark's first foray into space was interrupted by a Decepticon attack, and all involved were too distracted to notice as they entered an asteroid belt. A collision between two meteorites sent the Transformers crashing into Earth. After countless eons of slumber, the Autobots awoke to a world populated by humans, and once more took up the fight against the Decepticons. From Cybertron to Earth the War Continues...
Hasbro's subsidiary Milton Bradley (MB) released the toy in Europe in late 1985, following a slight delay due to licensing issues; there are no less than three variants of MB-packaged Optimus Prime, one of them manufactured by Takara and sporting blue feet, the other two manufactured by Joustra as part of a deal with Hasbro/MB, one of them with blue and the other one with red feet;
A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.
Unite for the Universe Optimus Prime would have been a redeco of the 2007 Optimus Prime Voyager-Class mold in a similar style to the Leader-Class Buster Optimus Prime (see below), with a much more accurate and detailed paint scheme, including white stenciled flames. He would have come with a set of Jetfire armour parts to form the powered-up Optimus Prime seen at end of Revenge of the Fallen, and due to not having to form Jetfire's robot mode or his jet mode, the armour parts are far more accurate to the movie's design of them than the leader class Jetfire toy could manage. While not combined to Optimus Prime, the armour can be arranged to form a sort of weapon emplacement mode or a jet engine on the back of Optimus's vehicle mode.
The mold suffers from a minor design oversight, wherein the rear Nissan badge collides with his left leg strut when the left foot is hinged over and pegged into a clear plastic socket during transformation, with the results being that the connection is slightly crooked, isn't very secure, and sometimes pops off, and that the crooked pegging often causes the socket to crack.
"Optimus Prime Figure" (オプティマスプライム・フィギア) is a redeco of 2001 Robots in Disguise Spychanger Scourge, painted to resemble Movie Optimus Prime. Of note is the tampographed detailing on his chest resembling Movie Prime's distinctive chest design. Like most Spychangers, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly.
The main build of the set is a massive vehicle based on Optimus's truck cab, capable of seating a single Kreon in the driver's seat. Pushing the trailer-hitch on the back end towards the cab opens up the front grill, revealing a huge spring-loaded rocket launcher with rubber-tipped projectile. The cab can also stow the included stasis pod ussed to lock away the baddies.
Our Deal of the Day features hand-picked daily deals with low prices on top electronic products, video games, tools, items for your kitchen and home, sporting goods, computer software, and more. Every day you will see our Lightning Deals displaying limited-time deals at great prices; make sure you buy quickly because these deals will go away fast. Our other Savings and Sales include hundreds of items throughout Amazon to pique your interest for savings on HDTVs; movies or TV shows; fashion items like clothing, jewelry, and watches; toys; and magazines. Come back often as our deals update daily.
The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.
Through the years, there have been many action figures made in the likeness of the original incarnation of Optimus Prime, some of which have been featured in fiction, others of which have not. Additionally, some toy makers have made unlicensed toys in his image or accessories for the existing toys. The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno. The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the Transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original Transformers toy line.
This creation and expansion of the secondary market in conjunction with LEGO now marketing some of their products to an older audience has made the prices of some old sets increase exponentially. On the extreme range, there is the UCS Millennium Falcon that is selling new for upwards of $2,000 (and close to $1,500 USED!). It sold for $500 new in 2007. Even non-licensed sets can run a premium, such as the Cafe Corner that was one of the original modular buildings. It was $150 new and now it can sell for over $1,000.
The SS-03 version of Takara's Deluxe-class Optimus figure, based on the Anniversary release, was released in Hasbro markets in a two pack with the smaller Japanese Megatron figure. There are some tiny but notable differences between this and the Anniversary figure; the Hasbro version uses a more neutral dark-gray for the main body as opposed to the Takara version's blue-tinted dark-gray, plain dark-blue plastic rather than dark-blue-with-sparkles, and plain yellow paint for the cab's lights rather than sparkly-yellow/gold.
According to IDW Publishing's Transformers: Movie Prequel comic book, Optimus Prime and Megatron co-ruled Cybertron until Megatron began a war for control of the Allspark. Optimus formed the Autobots, a militia of civilian transformers sworn to protect the Allspark. Optimus fought back, willing to doom Cybertron itself to deny Megatron the Allspark. His reasoning was that a new homeworld could be rebuilt with the Allspark once Megatron was no longer a threat. He entrusted Bumblebee with the task of distracting Megatron at Tyger Pax long enough for the Allspark to be sent into space.
This release of Buster Optimus Prime was susceptible to a paint scraping issue on the silver painted slide-out barrel of his blaster. This problem was fixed for the DOTM Re-release by relocating the silver paint app from the barrel to the inside wall of an exposed gas tank that had been previously left as unpainted grey plastic. The black paint app on the barrel was left unchanged.
This mold was redecoed in 2000 as Car Robots Black Convoy, and slightly retooled as his US incarnation "Scourge". After Scourge, the next use of this mold was planned to be Toxitron, which ended up being canceled. The slightly retooled version of this mold was released in 2006 in Japan as reissue Battle Convoy, which was the name of this toy during the Japanese Generation 2. The reissue used the Robots in Disguise modified tooling, with a slightly modified deco using silver vacuum-metalized plastic on his chest and trailer sides along with additional paint applications and G2 symbols. The mold was also redecoed to create a new Generation 2 version of Ultra Magnus as an E-Hobby exclusive (unusual in that the character was killed in the course of Japan's Generation One fiction).