The first Cybertron Optimus Prime toy transforms into a heavily-armed fire truck of made up origin, topped with two large cannons. The left fires a spring-loaded translucent blue missile, while the right features electronic sound effects and a flashing red LED. The cannons and the sides of the truck fold down to create an unlikely flight mode for the vehicle.

The Transformers Energon figure pen is based on Optimus Prime in his standard Energon body. About the size of a scout class toy, he transforms from truck mode to robot mode almost identically to his mainline toys, apart from the fact that his feet contain the pen and cannot bend. It's really hard to write with, and almost impossible to pose, even though it has full arm articulation. Amusingly, this figure can position itself to transform into his super robot mode (by flipping his helmet on, opening his chest and flipping his hands in), but because there are no versions of the Prime Force drones in this scale, it's impossible to complete him.


the one the left was a design that i hated from the start. just doesnt look like what a Transformer is supposed be. the one on the right is almost there but not quite. a very welcoming design though. its what Prime should have looked like from the start. To say it is too 80s, well the first film should have taken place in the 80s, not present day. The Transformers are icons of the 80s. You make Cybertron in the future tense all futuristic and alien-ish and whatnot, but on earth you make it in the 80s.

Instead of his trailer, Prime can alternately combine with Armada Jetfire, who forms a pair of legs, as "Jet Prime" (Jet Optimus on the cartoon, or "Jet Convoy" if you own the Japanese version). In addition to this, Armada Overload can form a pair of massive cannons that attach to either Prime's base mode, or mount over the shoulders of his super robot torso (with either his trailer or Jetfire as legs), forming Optimus Prime Megaweapon (or Magna Convoy).
Laser Optimus Prime transforms into a mid-1990s Western Star 4964EX, pulling a grey and black fuel tank trailer. The sides of the trailer are decorated with a sticker depicting Prime using a flamethrower to burn down a banner with the words "Optimus Prime Octane" on it. The truck is armed with a disc launcher on the roof of its trailer, which launches five blue discs bearing the Generation 2 Autobot insignia as a knob is turned. Like the other "Laser" toys released this year, Prime features electronics powered by two button-cell batteries; in truck mode, pressing the button on the cab's roof causes his headlight to light up with yellow LEDs.
Another release of the Reveal the Shield Legends Class sculpt. The deco for its initial release is unchanged from the Transformers release from 2012, whereas the tooling is identical to the 2012 release's running change variant, with the retooled hands and a hole on the back of his head/top compatible with Cyberverse 3mm pegs. Bizarrely, the package art is lifted directly from the Generations Legends Class Optimus Prime/Autobot Roller two-pack's packaging, whereas the stock photos depicted on the back of the packaging are taken from Reveal the Shield Optimus Prime's packaging and only slightly altered, advertising a "Reveal the Shield" rubsign gimmick the toy doesn't actually have. Meanwhile, Hasbro's official stock photos provided to online retailers (including an in-packaging photo) depict the toy with the sword that came with the running change variant of the sculpt's 2012 release, even though the actual toy doesn't include the sword.
Part of the first assortment of "Custom Kreons", this version of Optimus Prime comes with a buildable parts rack on which to hang/store his many many extra pieces. His tampographs are much more heavily-detailed than the original Kreons, based on the original Optimus Prime toy. His "normal" helmet (and small sword) are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens), plus a buildable large rifle, a buildable wing-pack, and a ray pistol (originally an Andorian blaster from Kre-O Star Trek).
The figure was re-released in Hasbro's Asian markets in 2012, with no known changes to the figure itself but several modifications to the packaging that makes it easy to tell the two releases apart: The flap containing the package art is omitted entirely, the "Commemorative Series II" label is missing, the age recommendation and safety warning labels, the "Changes from double tractor trailer to battle station to super robot!" call-out and the name of the toy have all been shuffled around (with the words "battle" and "super" being omitted in the process), and most notably, the toy is no longer named "Powermaster Optimus Prime with Apex Armor", but simply "Optimus Prime", with Apex Bomber's existence no longer acknowledged anywhere on the packaging.
A BotCon 2012 exclusive purple redeco of the Deluxe "Generation 2" Optimus Prime figure from the Generations toy line, with the sword's blade molded in clear yellow. Much like the 2008 Voyager figure, this figure has painted-in "battle damage" effects. The right side of the hood has the words, "I shall stand...", while the left side says, "The rest shall fall."

In addition, it is very difficult, if not impossible for the vehicle mode to tab together properly. The entire cab assembly breaks apart very easily as the tabs lack sufficient friction to keep it together, resulting in either a gap forming between the front windows and the hood or part of the hood raising up. The pipes that are supposed to connect to the bottom of the smokestacks also don't swing out far enough to properly do so if the feet are tabbed together completely. When attempting to complete the cab assembly, it is advised to apply upward pressure on the front side barrels while pushing the cab downwards. A misassembly error is also present on all versions of the mold, where the roof hinges that connect the sides of the cabin are reversed.
Part of the first wave of battle upgrade Hero Mashers toys, Optimus is a non-transforming robot who can swap any of his parts out with other Hero Mashers figure to create many combinations. He includes his iconic Energon axe, a large projectile-launching gun, another large gun, two missile packs, and an arm for Ultra Magnus. Optimus Prime also has a pointing right hand, which allows you to do a certain Optimus Prime pose in a Dreamwave Productions comic.

For its release in Korea, Hasbro Asia provided a collector coin featuring truck-mode Optimus Prime on one side and "MP-01L" on the other. The coin came mounted on a card featuring lineart of the Autobot leader's head, the stark black design of which could be mistaken for promoting the earlier "Sleep Mode" release. The limited release (and general lack of enthusiasm for the collector coins in Korea) makes this one of the more difficult Masterpiece coins to find.


Hot Rod only appeared three more times: once when he gave the Matrix to a Quintesson-controlled Optimus Prime. When he lost the Matrix, Rodimus was forced to face down his fears once and for all when the Decepticons began a series of attacks on Japan. Overwhelmed by the different responsibilities and directions he was being pulled in, Rodimus went joyriding and was attacked by the Stunticons Dead End and Wildrider, losing the Matrix in the ensuing crash, which was acquired by the Scourge, one of Galvatron's minions, the Decepticons' tracker and leader of the Sweeps. While Rodimus became Hot Rod again – and was not eager to change back – Scourge was warped and enhanced by the Matrix and led another attack on Japan. Counseled by a martial arts master on giri – the burden hardest to bear – Rodimus realized that the Matrix was his burden, and that he had been chosen to bear it; battling Scourge, he recovered the Matrix and resumed his role as leader, and finally when Optimus Prime was resurrected, Rodimus Prime was able to return to being Hot Rod for good. In all three occasions, his return to Hot Rod took place because he lost or passed the Matrix to someone else.
The main Prime line in Japan, while mostly using the same molds, was quite a bit different from the Hasbro version. Hoping to snag a slightly-older market, the toys were given a bit of "model kit" vibe. Paint operations were reduced and replaced with old-fashioned sticker sheets, so you had to customize/complete the toy itself... and then there was the blatantly model-kit Arms Microns packed in with every toy.

Optimus Prime also appears in the text-based fiction Dungeons & Dinobots. He commands the Autobots to attack the Arch-Ayr fuel dump. The attack is thwarted when the main Decepticon forces are augmented by the Mayhem Suppression Squad. When Wheeljack attacks both the Autobots and Decepticons with a massive force of drone Dinobots, Optimus offers to allow the outcast Autobot scientist to rejoin the Autobot ranks if the Dinobots destroy the Decepticons. The Dinobots prove unstable and go on a rampage, attacking everyone, including each other. Optimus punishes Wheeljack by having Ratchet painfully reformat him for Earth mode and assigning him to the Ark repair crew on the advice of Side Burn. He punishes Blurr for allowing his heroic Decepticon cousin, Crasher, part of the Mayhem Suppression Squad, to live. When Grimlock returns to the Autobots, Optimus lets him live because the Dinobot has gained useful intelligence and helps in work on the Ark.
In this set, both the buildable Optimus Prime and the included Kreon figure are in the style of Beast Hunters Optimus Prime. In addition to the robot mode having a buildable shield and sword, both it and the vehicle build have two firing missile launchers. Additionally, four hands are included, with two possibilities for each arm. These Optimus Primes come with a buildable Predacon beast Lazerback and an Energon Kicker Kreon.
Released alongside a Sega Mega Drive version of Megatron and outside of any other toyline, "Optimus Prime featuring Original PlayStation" transforms from robot to a scaled-down non-functional Sony PlayStation video game console. He features an opening disc compartment and comes with two accessories, a memory card and a controller that splits in two and attaches to his lower arms to act as blasters.

Part of Hasbro's Platinum Edition offerings for 2016 intended to commemorate the 30th anniversary of The Transformers: The Movie, this Optimus Prime is yet another redeco of the Classics Voyager toy. Rather than the show-accurate colors like the Age of Extinction 2-pack figure, the toy's deco is very similar to the Classics release, with some changes and omissions: his blue plastic is a dark metallic sheen, his knee's yellow detailing was removed, his small Autobot symbol tampograph was placed on his right shoulder, and his larger one is placed on his energy unit. His side door/arm kibble is left unpainted. According to Mark Weber, this was meant to represent his abdominal area being torn in the movie's battle. (Yeah, we have no idea how it works, since the "battle damage" parts end up on his arms in robot mode.)


Ten years after Unicron's defeat, Cybertron was seemimngly at peace, but Optimus still feared another attack from Unicron. Although the Autobot High Council dismissed his fears, a mental link with Primus confirmed that Unicron was still alive. Megatron's disembodied spark, trapped within the chaos-bringer, called out to Prime. Events overtook Prime as Unicron's four Horsemen, Rhinox, Airazor, Cheetor, and Terrorsaur, attacked Cybertron, devastating it. Prime's link with Primus allowed him to upgrade himself into his Energon form and drive them off.

The TakaraTomy version, part of the seventh wave of Japanese Prime toys, is dubbed Arms Master Optimus, uses darker, metallic plastics, casts the backs of his thighs in metallic red, replaces his metallic silver paint with glossy gray, and replaces a few of his paint operations with customer-applied foil stickers, such as his insignias, shins, headlamps, the tiny yellow lights on his torso, and the blue deco on his truck panel sides. He has also been retooled with additional 5mm pegs for his thighs, roof, and lower backpack, as well as ports for his forearms, shoulders, smokestacks, fuel tanks, and roof. Instead of the rifle, he comes with a very large Matrix which can tab onto his chest as armor or mount onto the back of the truck cab, with the Matrix also being covered in 5mm posts and holes so that Arms Microns can be attached to it. He additionally comes with a clear-blue "Shining" version of the Arms Micron, R.A., who can combine with the Matrix to form the colossal Matrix Saber.
A mode for Arms Master Optimus designed for underwater combat, "Aqua Screw Mode" was shown in Cybertron Satellite segment of "Explosive Sword Transformation! Wheeljack and Dreadwing". C.L. and Balo are combined into a propeller engine and attached to his right foot, their GR and G redecoes do the same for the left, and B.H. B is attached to his right shoulder to act as a radar system. He wears Arc S's blade on his right arm and wields the Giga Tornado Cannon Combo Weapon.
Part of the first wave of Age of Extinction: Generations Voyager Class toys, "Evasion Mode Optimus Prime" is an all-new figure based on the character's initial form in the film, transforming from a cab-over semi truck into a robot mostly similar to his previous movie design. The truck mode is heavily based on Generation 1 Optimus Prime's White Freightliner WFT alt mode in both sculpt and deco, although it draws a few details, such as the singular smokestack and wheel designs, from the heavily faded Marmon 97 seen on-screen. In robot mode, he sports faux-kibble windows and, amusingly, two false smokestacks. Unfortunately, due to being used with the transformation, he lacks the real elbow joint on the arm, which makes the lower section of the arm the only poseable section. Also, Optimus can wield weapons with longer posts while his arms are in a "default" 90° position.
In the series released by Marvel Comics, before the Great War broke out on Cybertron, the robot who would be Optimus Prime, before he received the Matrix of Leadership from Sentinel Prime, was a Transformer of note, displaying his skills in the Infraformers Sharpshooting Competition. When the war began, Prime quickly made a name for himself as a combat leader of the Autobots.
A Voyager-class two pack of Classics Optimus Prime, representing the Generation 1 version of the character, and a redeco of Age of Extinction Evasion Optimus Prime representing the Movie character (The deco patterns is most likely to emulate the character's design in 2007, with vague results). Like Rusty Optimus Prime (seen below), he features flames on his vehicle mode doors.
The styling is a little blocky, but these are toys aimed at a younger audience that actually wants to play with their Transformers. They don’t need 45 step transformations that result in perfect representations of what they see on screen. They want something that they can switch quickly between modes and that have added play potential, with power-up engines that unlock special features.

Hot Rod identified the Decepticons on board through the damaged hull and immediately attacked the targets within using low powered, rapid fire bursts. When the Decepticons returned fire, Hot Rod changed tactics and began firing more concentrated blasts at the shuttle itself. Eventually, he managed to disable the shuttle. With their cover blown, Megatron ordered his forces to attack and the Decepticons began pouring out, beginning their planned assault on Autobot City. Before focusing his attention on the onslaught, an incensed Megatron destroyed the observation platform on which Hot Rod and Daniel were standing. True to his protective Autobot instincts, the first concern of Hot Rod was for the safety of Daniel. Quickly shielding the young boy, the two survived the platform collapse but were soon cornered by Blitzwing and Shrapnel. Timely intervention by the old and experienced Autobot Kup diverted the cannon fire from Blitzwing and allowed the three of them to escape.
Optimus Prime is then informed that Megatron has infected the core of Cybertron with dark energon and is given the task to undo the damage done. After rescuing Omega Supreme, Optimus, Ironhide, and Prowl fight their way to the core, but it's too late. The core informs Optimus that it is far too corrupted. It can repair itself by shuting down, but it will take millions of years. By that time, Cybertron will have to become cold, barren, and uninhabitable. The core gives Optimus a small piece of itself, saying it will still survive as long as the piece does. Optimus accepts the burden and the core relinquishes the Autobot Matrix of Leadership.
Part of the first assortment of "Custom Kreons", this version of Optimus Prime comes with a buildable parts rack on which to hang/store his many many extra pieces. His tampographs are much more heavily-detailed than the original Kreons, based on the original Optimus Prime toy. His "normal" helmet (and small sword) are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens), plus a buildable large rifle, a buildable wing-pack, and a ray pistol (originally an Andorian blaster from Kre-O Star Trek).
The U.S. release of Super Fire Convoy had the Japanese voice replaced with an English voice (with the lines, "Optimus Prime, Maximize!" and "Autobots, Transform"), and Autobot insignias were added on the side panels. Much like the Japanese version, Optimus Prime's normal robot mode can combine with Ultra Magnus (sold separately) to form Omega Prime.[48]
Prime was perpetually at the forefront of the action throughout the early years of the war on Earth, usually confronting Megatron, though in some rare instances, such as against the Insecticon-controlled Decepticons or the Combaticons, teaming up with him for the greater good. He has suffered his fair share of battlefield scrapes, almost meeting his end when his vital cosmotron component was critically damaged by the Decepticon jets and when Laserbeak had his body disassembled and turned into Decepticon trophies, such as a pet "alligaticon" and a defense laser.
While the other Autobots searched for the Matrix on Earth, Optimus Prime searched for Vector Sigma, guided through the dangers of the planet's catacombs by the spirit of Alpha Trion. Prime eventually arrived at the computer, only to find his way barred by Cyclonus and Scourge. At that moment, Hot Rod arrived with the Matrix, the same with which Alpha Trion merged, re-energizing it. The Matrix transformed Hot Rod back into Rodimus Prime and, for the first time, the two Primes fought side-by-side and defeated Galvatron. Before Rodimus could implement the Matrix to stabilize Vector Sigma, however, Optimus Prime merged himself with the computer, restoring its balance to save the planet. Optimus Prime sacrificed himself, dying again only a few short episodes after his rebirth. Later, Prime would make a final and permanent return in the Japanese Transformers continuity, Battlestars: Return of Convoy. This entry was only available in print, appearing in the TV Magazine, a Japanese publication.

These include two large guns, patterned after the new weapons included with the G2 version of the classic Optimus Prime toy, which can be attached to the trailer in a similar fashion to those of Powermaster Prime. Also included are two additional (blue) Prime heads, sculpted explicitly in the style of Generation 2 comic artist Derek Yaniger's interpretation of Prime, especially as seen on the cover of the first issue, one pristine and the other battle-damaged.
Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such.[50] Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.

A Japan-exclusive release of the Voyager Class figure with a trailer and a different Mech Tech weapon. The trailer opens like the original G1 toy and fits up to two Deluxe Class vehicles of the same toy line. In addition, the trailer can hold over 20 Mech Tech weapons. The supplied Mech Tech weapon is a blaster with a retractable blade designed similarly to Optimus' forearm swords.[123]
In an amusing (but glaring) example of poor quality control in a Takara product, the back of the packaging features a small amount of Engrish, notably the word "kinetic" being written as "Kinetick". The bio also mentions the elemental metal as the "Cyber-Matter" living metal, which is used for the Aligned continuity family. Oddly, TakaraTomy's stock photo of the robot mode figure was later used as a cutout "battle figure" included with Telebi Magazine's Burning Megatron.
A late-run extensive redeco of the Super Base Armada Optimus Prime toy, "Powerlinx" Optimus Prime sports the darker color scheme the character takes on in the Armada cartoon episode "Origin" following a Mini-Con power-up, but he is not precisely show-accurate—the deco would later be fine-tuned with more accurate details for release in Japan as the Magna Convoy DX giftset (see below). In addition to now sporting fully-mobile Super Mode arms without the movement-impeding tabs, Prime still comes with all his features and accessories, though for this release, his Mini-Con partner Sparkplug got retooled with a new rear chassis and a blinged-out golden chrome body as "Corona Sparkplug".
Replacing the weapons of the Hasbro releases, these new Mini-Cons transform into their larger parnter's signature weapons. They came as unassembled, unpainted model kits, similarly using stickers to fill in details. Several Arms Microns also came by themselves in bagged kits, plus there was a metric ton of promotional Microns throughout the line, possibly more than any prior line (even Micron Legend!), and that's not counting the ones that were released during the First Edition series. The Arms Microns also had multiple 5 mm posts and holes, and could be combined into super weapons, plus the larger toys were retooled to have new Arms Micron mounting points.
As a 25th anniversary set, Prime includes several new pack-in bonuses: a reprint of the first issue of the original Marvel comic book, a DVD containing all three parts of the animated series pilot "More than Meets the Eye", and three desktop wallpapers, and a battery-powered Autobot symbol that plays transforming sound effects, part of the first version of the Transformers theme song, and three voice clips performed by Peter Cullen: "I am Optimus Prime!", "Autobot, transform and roll out!" and "Megatron must be stopped, no matter the cost." There are some reports that the Autobot symbol could be worn out or damaged during the time of purchase.
In Transformers: The Last Knight, he is brother-in-arms with Bumblebee who he fought alongside with to foil the Nazi Party in World War 2. He speaks with a thick French accent due to being stuck in France for so long, much to his own embarrassment. He wields a special gun which can briefly slow down time. He is also the only Transformer who is shown to speak in vehicle mode. [20][21]

After the events of Transformers Animated the Stunticons set up a Stunt Convoy show in the city of Kaon and use it as cover to attempt to break Megatron out of his detention at Trypticon. Their attempts are thwarted thanks to the efforts of Cheetor, Optimus Prime, and Sideswipe. The Stunticons are placed in detention with Megatron and an attempt to rescue them was made by the Decepticons Blot, Mindwipe, Oil Slick, Scalpel, Sky-Byte, and Strika.[143]
Seibertron member, carytheone, has directed us to CarScoops.com, which has revealed that General Motors are to be auctioning off four of its Transformers Movie Camaros from Transformers: Revenge of the Fallen, Transformers: Dark of the Moon, Transformers: Age of Extinction and Transformers: The Last Knight. The car itself was as much of a star as the Transformers themselves and even the actors, so the interest is bound to be high. These are surely the auctions for “big bucks” Car - Read More
I have to disagree. Look at our planet. Jagged and rigid is an aspect of primitive technology. Smooth, compact, and protected is an aspect of futuristic technology. Transformers should look more advanced than what we hsve, nor technologically regressive. They have better scientists and millennia of knowledge compared to us. Smooth designs like Knight's are the only ones that make realistic sense in that context of technological progression, even as a life form.

In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.


The Transformers Adventure Easy Dynamic Series release, titled "Big Optimus Prime", features extra paint details and has two additional Autobot symbols on his shoulders. He also includes a different scannable badge, which is compatible with TakaraTomy's Transformers Adventures app. Scanning this will unlock Big Optimus Prime in the collection list. Unlike the American release, Big Optimus Prime is packaged in a windowed box, instead of an an open package.

Note: Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor and a stepup/stepdown transformer (the electrical kind) with advice from an electronics specialty shop is recommended.

An absolutely incredible 28 seasons in, The Simpsons writers and producers have had to be unbelievably creative in coming up with a new couch gag for more than 600 episodes. They’ve had a doppleganger Simpsons family walk in on the family, the whole town has absurdly squeezed into their living room, and we’ve toured the inner workings of Homer’s body.
The first toy in TakaraTomy's United toyline is a redeco of the War for Cybertron Deluxe Class Optimus Prime, transforming into a Cybertronic "armored truck". As has been TakaraTomy's wont of late, he now sports a metallic red paint job, with brighter pink paint applications and cooler grey parts, and features several additional paint details to those present on the Hasbro figure in the form of black chest windows and pink lines on his face mask. His rifle transforms as well, folding and plugging into the roof of the vehicle mode. The rifle can also peg into his forearms, and, in its compact configuration, can attach to his shoulders via peg holes on the backs of his front tires or stored behind his back in robot mode.
Available exclusively from Japanese clothing company A Bathing Ape in April 2012, "Convoy Reissue BAPE Ver. BLACK" (コンボイ復刻版 BAPE® Ver. BLACK) is a redeco of the original Optimus Prime toy sporting a unique new grey color scheme, along with a grey trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese packaging.
×