Unfortunately for both Takara and Hasbro, the Generation Two series of Transformers sold poorly, and Hasbro abandoned it after two years. There were toys planned that never saw release. Most of these were G1 combiner team recolors or recolors of recent figures. Four unreleased molds were released in the Machine Wars line, and four more resurfaced in the Robots In Disguise series.
In Spotlight: Doubledealer, Hot Rod's search was interrupted by Dealer's arrival on Earth, with orders for Hot Rod: find the Magnificence and use it to learn what they could about the Expansion. Hot Rod took Dealer to his hiding spot, which turned out to be the planet where they first found the device. As Dealer and Hot Rod closed on the Magnificence, he went over his first visit to the planet in his mind, and how things could have gone so wrong. Eventually he began to have suspicions, and upon locating the Magnificence, asked it the question that haunted him: had Dealer betrayed him? Sadly, it revealed the truth, and Hot Rod was forced to kill Dealer as the traitor attacked. Looking down on his remains, Hot Rod realized the truth had been staring him in the face, he just had not wanted to accept it. He then used the Magnificence to find out all he could about the Expansion, and relayed the information to the Autobots.
This gold-chrome and clear-plastic redeco of the Leader-class Optimus Prime figure was first offered as a prize in a mail-in contest held through TV Magazine alongside a silver chrome version of the same toy (see below). Both figures were later made available again as prizes in a second contest in the September 2005 issue of TV Magazine, together with "Galaxy Convoy Custom Color Version" (again, see below).
Though Optimus was a master marksman, he had a personal policy against shooting directly at his opponents' bodies during his races. In one such race, he allowed his rival to take the lead so that he could use his favorite weapon, the Impact Wrench Gun, to blast the road beneath the other racer's feet, causing him to lose his balance. Transform in a gust! When GT-R Megatron burst onto the scene, roaring that all previous races had failed to "ignite his warrior's spark," Optimus readied to give him the race of a lifetime. GT-R Megatron Attacks! Like other racers, GT-R Prime attended photo shoots alongside Misaki in order to promote coexistence between humans and Transformers. The Work of the GT Sister Race Queens? When a reincarnated Unicron attacked the Transformers GT finals and absorbed the huge energon pool saved up for the final prize, Prime restored his true power by using the "Matrix In" process to recombine with Misaki. Together with the other powered up racers, he fought and defeated Unicron, saving the Earth. The True TFGT
Optimus Prime is among the three Autobot figures available to play in the Monopoly Transformers Collectors Edition game. As the figurehead of the entire Transformers franchise, Optimus Prime has been on more pieces of merchandise than can be stated here. Several statues and busts of Optimus Prime as well as Optimus Prime themed objects have been released by various companies since the return of Transformers to prominence, such as the "Optimus Prime Oral Care Station". Other figures released include various PVCs as part of Takara's "Super Collection Figure" line, which were later imported as part of Hasbro's "Heroes of Cybertron" series. Larger "Mega Collection Figure" PVCs were articulated and came with energy axe and gun figures. As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".
In late 2014, twelve Kreons were sold through TakaraTomy's "TakaraTomy A.R.T.S" Gacha capsule-toy machines in Japan. Thankfully for the rest of the world, these Kreons are all basically identical to previously-released ones in the Hasbro lines. The Gacha release of Optimus Prime is basically the base Custom Kreon Optimus using his clear-plastic helmet and carrying the small ray pistol, lacking his leg-wheels, smokestacks and backpack (and of course all those other parts and accessories).
After the rise of the Decepticons and the death of the merciless Zeta Prime, he became the Prime, and entered what would become a millions-of-years-long war of attrition with the Decepticons, which would lead to the death of Cybertron and the spreading of the Cybertronian civil war far beyond their homeworld in a push for resources. With the end of the war and the emptying of the Matrix of Leadership to restart Vector Sigma and rebirth Cybertron, he found himself rejected by the returning civilian population, and - secretly gladly - abdicated his rank and returned to his original name of Orion Pax as he travelled through the galaxy.
Released as part of the Energon Igniters Power Plus Series subline, this Optimus Prime is a Scout-sized mold that converts from robot to truck based on his appearance in Age of Extinction in just a few steps. His only articulation is the swiveling upper arms & pivoting arm joints, and his fuel tanks also doubles as a flip-out cannons, activated in vehicle mode. As with all Nitro and Power Plus figures, Optimus also comes with an energon core, which allows his vehicle mode to propel forwards.
Additionally, Star Convoy transforms into a large battle station that interacts with the Micromasters that made up the vast majority of the Transformer toyline at the time. His chest contains a peg that allows Micromaster figures to stand inside it in either robot or base modes, and he comes with a unique Micromaster version of Hot Rod not available on its own. He features storage space in his legs for two spring-loaded figure-launching Micro Trailers, and comes with one of his own, decorated in a unique black and orange color scheme. In this mode, two ramps are connected to the Microcarrier; when the carrier's treads are set rolling, they do not move the base, but instead act as conveyor belts that carry Micromaster figures down the ramps. The Microcarrier also spins a gun turret mounted between the conveyors, on which Micromaster figures can stand. Finally, a special connector packaged with Star Convoy allows the Microcarrier to be connected up to Grandus's base mode, powering his moving elevator.
A Deluxe-sized figure sold only in Japan and Asian markets by Takara Tomy. The package consists of a highly poseable skeletal frame called a Core Body, along with parts to assemble the Core Body to either a Protoform mode or robot mode. In Protoform, the figure can transform into an atmospheric Entry Mode. The figure with robot parts is able to fully transform into vehicle mode.
Smallest Transforming Transformers Convoy is the smallest fully transforming Optimus Prime toy yet. He features an accurate transformation sequence based on the original full-sized toy, but understandably has no detachable hands, and has little articulation. His sculpt is based upon his cartoon appearances. He comes with a tiny version of his laser rifle.
Commemorating the death of Optimus Prime in The Transformers: The Movie, this set contains a special version of the original Optimus Prime figure with show-inspired translucent blue windows. It was packaged with Ligier and Alert, in an apparent homage to the similar Diaclone "Powered Convoy DX" giftset that packaged the "Powered Convoy" version of the Optimus mold with figures using the molds of Ligier and Alert.
Also, as a new feature, most figures include advanced "automorph technology", which is designed to create quicker and easier conversion, which means moving one part of the vehicle or robot causes other parts to move, creating a final shift to battle mode; this was successful because the transformation was more complex in the movie line than in any other Transformers toy line.
Over twenty-plus years, there have been a bajillion releases of this mold, some identical to the original toy, and some featuring significant variants with notably different paint jobs, color schemes, accessories and other pack-ins. We have striven to list all these variants on this page under their respective series; for a quick-reference list of all variants and releases check here. The cab robot has also been used sparingly to represent different characters; outfitted with different trailers, it has become Generation 1 Ultra Magnus and Pepsi Convoy.
Released in the first wave of the Authentics toyline, "Autobot Optimus Prime" is a new mold the size of a 2015 Robots in Disguise Battle Pack toy. He changes from an evergreen-inspired robot into a more G1-based truck in just four steps. His instructions are incorrect; for truck mode, his legs must be folded in before the arms, otherwise the locking tabs on the arms will get in the way. Due to his transformation, he ends up with no elbows and a fake chest. He also has problems standing up due to hollow legs.
This Optimus Prime is a non-transforming truck that is loaded with a number of gimmicks: Pressing the back button activates his Weaponizer-sque (or Stealth Force-sque) battle mode on his truck form, with the lights being emitted in the same time. He features both spring-loaded (truck front) and pressure-firing (both sides of the launcher) discs, with a flat character art of Slipstream & Sawback being sculpted on it. Optimus Also comes with additional Slipstream and Sawback figurines, which they can be (uselessly) attached on Optimus Prime's truck top & both sides of the launchers.
The percentage in the title is not a turn of phrase nor something inferred in any way, it comes from a quote by Bumblebee movie producer Lorenzo Di Bonventura. Whether Bumblebee is a prequel or reboot (or anything in between) has been a hot topic for fans , especially those who want to distance themselves as much as possible from the previous films made by Michael Bay. These debates have reached Bonaventura who sat down with Metro and explained why to him, the Bumblebee film was 100% a prequel - Read More
[…] What Happened with LEGO When I was working on my last presentation, I totally had the idea of buying a bunch of lego people and taking pictures to make the slides (like those awesome slide decks you see online). However I was surprised to find that you didn’t just buy a pack of people, but you could buy different bodies, heads, beards, hair, and other accessories – oh, and they weren’t cheap! […]
This Japanese series, told through radio plays using the Transformers: Alternators Optimus Prime toy mold, branches off from the original animated series. It is set in a different universe than both the original G1 and Binaltech continuities. Set in the year 2006, one year after Prime's death in The Transformers: The Movie and four years before the third season, it sees Prime's corpse covertly transported to Japan by the Earth Defense Command, a government organization. The convoy transporting his body was attacked by a group of female commandos, led by Marissa Faireborn, who had known Prime years ago as a child. Believing they had secured Prime's body, the commandos were taken by surprise by EDC "Kiss Player" operative Ringo and her Autrooper mechanoid partner, who killed them all except Marissa. Marissa went to Prime's body just as an Autrooper began to fuse with it and, reflecting on her childhood memories of Prime, she gave his faceplate a final kiss. This initiated a transformation where Marissa and Prime were fused together and Prime was reborn with a new body, capable of transforming into a Dodge Ram SRT-10.
Hot Rod is often portrayed as energetic, yet brash and headstrong, with an overwhelming self-confidence that borders on arrogance. As Rodimus Prime, leader of the Autobots, he is significantly more mature, physically powerful and instilled with the wisdom of the previous holders of the Matrix of Leadership. In a reversal of his behavior as Hot Rod, Rodimus is plagued by lack of confidence in his role as Autobot commander and often doubts his own decisions, feeling both inferior to and in some ways living in the shadow of the previous leader of the Autobots, Optimus Prime.
1.) MP 10 EVA. Its arguably the best mold of any figure, and that color scheme! 2.) MP 12 Lambor. My fav transformer aand my fav car as a kid, cant beat it. 3.) MP Grimlock. Robot mode just looks like be dominates the shelf, regardless of who be is next to. 4.) MP Exhaust, mostly bc of the novelty factor as he is a pain to get in the States, plus his back story is cool. If not for that, MP 11 Skywarp would take this spot. 5.) MP Soundwave w/ cassettes. Duh!
A perfect example of why I dislike modern Transformers more and more. I'm 22, and when I was younger Transformers were my favorite thing. I still have many of the ones I had back then. But nowadays I'll go to Target or Toys R Us (RIP) and see what Hasbro has been up to, and they're bragging about how this Transformer only takes 5 steps to transform!
A very limited number of Gold Masterpiece Convoy figures were given away in a Lucky Draw contest in Japan. The figure uses the same design as Masterpiece Convoy, but every piece, including the windows and weapons, is cast in a gold color, reminiscent of his electrum coating from the episode The Golden Lagoon. The only exception is the tires, which remain black rubber. It comes packaged in the usual Masterpiece Convoy box, with the only telltale sign being the gold lettering in the "Master Piece" label. It's not clear how many were made, but it is thought to be no more than 10 or 20.
A repaint of the Armada Supercon Optimus Prime, minus the Mini-Con, but instead had a Cyber Key with a Mini-Con port in it. Repainted to match Cybertron Galaxy Force Optimus Prime. This is supposed to be a drone which Optimus Prime controls to get into small places, built for him by Metroplex. Several paint variations of this toy exist, and early releases have the forearms swapped, just as had occurred with the last repaints of the mold.
An extremely simplified version of Optimus Prime, this McDonald's Happy Meal toy transforms into a trailer-less truck cab. He is formed out of a large percentage of translucent plastic, and can combine with the other Happy Meal Armada toys (Hot Shot, Red Alert, and Smokescreen) into a human (well, robot) pyramid-style configuration, notionally considered a "Mighty Robot".
Available only via mail-order through Dengeki Hobby magazine, this black and gray redeco of Optimus is one of four "Black Body" promotional Robot Masters toys made available through different outlets simultaneously. He came with his normal accessories (it is worth noting his axe was solid silver), plus a chromed-gold clear-red-plastic version of Psycho-Orb's "Calamity Defenser" solitarium shield.
Takara's version of the figure was released in their markets slightly earlier, as the first of what would come to be several installments in their Masterpiece line. In addition to coming with a cardboard trailer that the buyer could assemble to "complete" Prime's truck mode, Takara's release differed from Hasbro's by featuring longer smokestacks (kept short on the Hasbro version for safety reasons, but incorrectly shown to be long in the stock photography shown at right), and lacking the black scorch-marked "battle damage" paint applications Hasbro included on the figure's shoulders, wrists and abdomen.
Great read. I have noticed an absolute drop in quality myself. My sets in my youth range from 83 to 90. My sons are from 2011 and there is a clear distinction. Aside from the weight of identical bricks being different, the older bricks stay together in a much more durable way than the new bricks. To test this, I created the same models using all old bricks and all new bricks and the difference was marked. I understand doing certain things to reduce costs, but not at the expense of quality…
While stock photos and renders show the figure with a faceplate, this image posted by the Transformers Facebook page shows him with his mouth exposed. This was later found as a variant at least once. A running change was made, changing the blades to be more translucent. The semi-translucent blades release features a date code "73461", whereas the translucent orange blades version features a date code written as "80171".
What makes LEGO sets seem more expensive now is that the effective piece count seems lower. I remember that in the 80s, each set was full of bricks that were not overtly specialized only to that set. So they were useful for more things. Now the sets usually come with less bricks and plates (things that could be useful everywhere) and bring more things like minifigure accessories, flick fire missiles and other things that are not that useful. Although I think that everything was far worse in the late 1990s/Early 2000s than it is now.
Part of the first wave of Prime: Beast Hunters Series 3 Cyberverse Commander Class toys, Optimus Prime is an all-new mold. He now transforms into a monstrous, flat-nosed truck with spiky fenders at the front and a cage compartment at the back, and comes with the Thunder Lance and Star Saber. Each of the weapons features two differently-placed 3mm posts, allowing them to be held by his hands, or mount onto two ports on the rear vehicle sides, as well as allowing the lance to additionally be used as a pressure-fired missile launcher.
The Reveal the Shield Legends Prime mold was redecoed again for the inclusion in the second EZ Collection wave. This version of the figure replaces his blue on the head with black, and the blue paint on the legs is stripped off, revealing the black plastic underneath. and like the Megatron redeco in the same wave, features a Generation 2 Autobot symbol instead of a Generation 1 insignia.
Optimus Prime transforms into a red and blue semi truck of likely fictitious origin. In keeping with the simplified transformation scheme of the Rescue Bots line, Optimus Prime transforms from truck to robot when his legs are folded down, at which point his head, arms, and hands emerge; folding his toes into position will finish the transformation.
This Classics Optimus Prime is a smaller, Deluxe Class figure with a noticeable physical resemblance to Takara's Robotmasters Prime figure, and a transformation that is about as successful. The figure is armed with a tommy gun-shaped laser rifle that transforms into a turret-like configuration and mounts on the rear of his truck mode, and features a spinning "power punch" action that sees the whole upper half of his torso spin when a button on his back is pressed. Pressing the button "unlocks" the spinning mechanism; pull hard on the button, and you can lock the torso back into place.
While Transformers ended poorly for the US market, the same can not be said for the UK, Canada, and Japan markets as they went on to produce their own continuing series between 1991 and 1993, despite the UK market in particular missing a substantial amount of figures prominent in the comics and animated series throughout the line's run. Each country produced their own continuity. The UK and Canada continued with new Action Master figures and introduced the Turbo Masters and Predators. Japan continued with the Micromasters concept.
Something of a shellformer, Convoy Nike Free is colored primarily white and red in his alt mode of a realistic-looking, scaled-down Nike sneaker, complete with (gratuitously long) real fabric shoelaces. In robot mode he incorporates some additional blue and silver in predictable areas and has a somewhat uniquely-shaped yet instantly recognizable G1-inspired head.
Unlike the stock photography, the actual toy doesn't feature a mouthplate. In October, : The two-pack was one of the three Evolution 2-packs available as a Toys"R"Us exclusive in Japan, with no changes on the figures with an exception of the packaging, which the front box features Japanese translated versions of the English text, and a sticker on the back confirming that this was a Japanese release. The robot mode stock photo lacks the gun nozzle/missile.
Note: Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor and a stepup/stepdown transformer (the electrical kind) with advice from an electronics specialty shop is recommended.
Shortly after reaching the other shore and taking out Skywarp, Prime witnessed the gigantic Bruticus bust out of the Terrordrome and attack everything around him. With Superion gone, Prime knew that there was only one way to stop this rampaging monster, and ordered his Autobots to evacuate the humans while he went looking for the Matrix of Leadership. He soon found that Snake-Eyes was in possession of the artifact, but was under attack from Megatron. Prime attacked Megatron, keeping him at bay while telling Snake-Eyes that destroying the Matrix would kill Bruticus. The ninja complied, only to learn that Optimus had left something out of the story: smashing the Matrix would kill all the Transformers, including Prime himself. Looking at the Autobot leader's body, the Joes knew that Prime had been aware of this, and had deemed it a necessary sacrifice to save the humans. The Iron Fist
Part of the new Adventure Shokugan series, this Optimus Prime is a transformable snap-fit kit molded in red, blue, and yellow plastic with detailing from stickers. The kit's transformation engineering is borrowed from the Warrior class figure. But unlike the said toy, the Axe must be pegged onto Prime's legs before transforming, and his shoulders are molded on his front truck halves/shoulders not being flipped down. Also, the stickers are used to cover the molded cavity on the front shoulders. As with Fixit & Underbite, Optimus Prime is fully transformable.
I understand what you’re saying. You want it to be like the Cybertron games of making them look less earth but still have the colors and molds of G1. Because I never knew that G1 actually had their vehicles molds in their Cybertron Alt Molds. I thought that was so stupid having earth vehicles parts on Cybertron. But they had to make the G1 fans and Bay fans happy so they took the cartoon and modernize it with some bayism look. I think they did good but I can see some parts being better.
Platinum Optimus is a redeco of the Leader Class Optimus Prime. Optimus' color palette is now darkened with some additional paint details. His "Sword of Judgment" is now a light blue. Optimus features more chrome on his "Vector Shield", chest, and on his head. The set was a shared exclusive, available from BigBadToyStore and Toys"R"Us, and was also sold during a Taiwanese event celebrating the launch of Transformers Rising.
The figure has diecast in its feet, shins, and abdomen. It features pinstriped flames, articulated fingers, a headsculpt with a face that can rotate between masked and unmasked modes in a method identical to Armor Knight Optimus Prime's, and an abdomen that opens to reveal a chamber housing a diecast Matrix of Leadership. He comes with said Matrix, his Ion Cannon, and a pair of Energy Swords that tab in behind his wrists (the hands unfortunately have to be bent forward to accommodate these). All three weapons can combine and store on the fifth wheel in vehicle mode.
The original Ultra Magnus figure has been reissued and redecoed several times down the years, and this article strives to list each edition of the figure under its own heading. The first alteration to Magnus, however, was a running change made while he was still on shelves: Originally, his tires were made of rubber and he sported paint on both his small and large robot heads, but this version was soon replaced with one featuring plastic tires and no paint on either head. In addition, the clear yellow plastic that formed his windows was removed from the cab, leaving just holes instead; and his thighs and fuel tanks were left white, as opposed to the vacuum metalized chrome ones of the original release.