Jetwing Optimus Prime is a retool of Revenge of the Fallen Leader class Buster Optimus Prime, with an accompanying large jet pack and massive dual Gatling Cannons. The base Optimus Prime figure has several modifications including: a new stomach area and elbow flares to reflect the changes to Optimus Prime's CG model in Dark of the Moon, modified lower arms to incorporate MechTech ports and clips for the cannons, and a retooled area under his back so the jet pack can fit on more securely. The dual energon blades mounted on his arms have been removed. The toy retains Buster Optimus Prime's electronics, but batteries are not included.
Alternatively, if Optimus chose to use the tainted fuel against the Decepticons, he ordered Grapple to carry out the vat outside of headquarters. He then instructed Grapple to lower the vat into a nearby pit, and instructed Jazz to torch the fuel with his flamethrower. He and Jazz waited until the last possible moment to carry out their plan, and once the fuel was lit, they dived to safety inside the Autobot base with the other Autobots. As the toxic cloud successfully turned away the Decepticons, Optimus was surprised to see Sunstreaker once more fully operational. Having been bought enough time, Perceptor was able to successfully cure the poisoned Autobots. Their ranks fully replenished and the Decepticons turning tail meant the Autobots had earned themselves another victory.
Hero Optimus Prime was the first new-mold Optimus Prime toy in the Generation 2 line. He transforms into a Kenworth truck of unknown model with a flatbed trailer. The truck and trailer form his robot mode, but cannot disconnect. His primary gimmick is an air-powered missile launcher that uses an air bellows attached by hose to launch his large, hollow, soft-rubber-tipped missiles. The bellows and missiles attach to his back in robot mode. His rifle plugs into the launcher's main body in truck mode.
After a thousand years of war on Cybertron, the planet was shaken from its orbit and risked being smashed to pieces by an asteroid field. Optimus decided to take a group of Autobots in the Ark and destroy the asteroids, but they were attacked by the Decepticons, and Optimus crashed the ship on Earth. Four million years later, the Ark repaired them, and they encountered Sparkplug and Spike Witwicky. Sparkplug suggested to Prime that the Autobots tap the volcano they'd crashed into for power. The two humans also warned the Autobots of an impending Decepticon attack, and Optimus laid a trap. Unfortunately the Decepticon forces attacked from all directions, and Starscream's null-ray put Optimus out of commission. Luckily Sparkplug easily fixed him, and his fast recovery inspired the Autobots to chase the Decepticons off. Optimus vowed to protect this new world. Battle for Cybertron
This figure was released during the short-lived period when Hasbro was treating the Beast Wars as an extension of the Autobot/Decepticon war, and Optimus Primal was presented as being the same character as Optimus Prime. This was soon relegated to the realms of micro-continuity when the Beast Wars animated series began and clearly established that the two Optimuses were different characters, but the toy remains one that was officially branded as Prime, and is consequently listed here.
As the number of sets released has increased, the harder it has been for stores to parcel out their shelving space. In order to make more sales, decisions have to be made as to which sets will be carried. Not every store can carry the whole product line (not even all official LEGO stores carry the whole product line). This process will favor the sets that drive sales the most, such as the licensed sets. The traditional boxes of bricks are pushed out of the way for the more profitable lines.
This mold was redecoed in 2000 as Car Robots Black Convoy, and slightly retooled as his US incarnation "Scourge". After Scourge, the next use of this mold was planned to be Toxitron, which ended up being canceled. The slightly retooled version of this mold was released in 2006 in Japan as reissue Battle Convoy, which was the name of this toy during the Japanese Generation 2. The reissue used the Robots in Disguise modified tooling, with a slightly modified deco using silver vacuum-metalized plastic on his chest and trailer sides along with additional paint applications and G2 symbols. The mold was also redecoed to create a new Generation 2 version of Ultra Magnus as an E-Hobby exclusive (unusual in that the character was killed in the course of Japan's Generation One fiction).
When the long-lost Titan Masters reemerged into modern society and joined the Autobot-Decepticon war, Optimus Prime was partnered with the Titan Master Apex, who carried a portion of Prime's spark, boosting the legendary commander's already formidable abilities. Titans Return Apex/Powermaster Optimus Prime toy bio On Velocitron, Optimus Prime was present for the biggest race of the year when Scourge and Crashbash arrived and attempted to botnap Hyperfire. Optimus ordered Sentinel Prime and Hardhead to battle against them. Later, Optimus was part of a battle on Cybertron against Soundwave. During the battle, the Autobots' base Fortress Maximus transformed to thwart the Decepticon advance. Optimus Prime declared that to defeat the Decepticons, the Autobots would need to master the power of the Titan Masters. Titans Return: The Power of the Titan Masters
One reason that people perceive that the cost of Lego has gone up is that the cost of so many other toys has gone down. You can now buy so much crap for a buck or two that Lego seems like a luxury item in comparison. It’s interesting to look in toy catalogs from the early eighties and see that Lego didn’t seem as costly then because the other toys were all costly as well.
Sold by Hasbro Toy Shop at various conventions, Pepsi Optimus Prime is a repackaging of a virtually unaltered 2005 Japanese Pepsi Convoy. (Again, his stacks are shortened for safety reasons.) However, this U.S. release is, officially, a different character. Whereas the Japanese release's bio explicitly identifies the product as a separate character from Convoy (created with help from NASA, no less), the U.S. bio conversely indicates that their version of the character most definitely is Optimus Prime. His motivation for schilling Pepsi is, apparently, that he wanted a new disguise but basically couldn't be arsed to actually reformat into a new altmode.
The original Optimus Prime toy started life as the Diaclone toy, "Battle Convoy", created by a team of Takara designers who came on board when the original designer fell behind. This team included Hiroyuki Obara (listed as the sole creator on the toy's patent) and famed mecha designer Shōji Kawamori. The toy transforms into two major components; the first component being a red and blue White Freightliner WFT-8664T cabover semi-trailer truck partially composed of die-cast metal, and the second component being a large silver trailer of currently-undetermined model.
An exclusive version of Titan Class Metroplex was made available at San Diego Comic-Con 2013. He comes with 12 small, non-transforming figurines of Orion Pax, Megatron, Bumblebee, Thundercracker, Trailcutter, and Hoist, all in both modes. The figurines are based on their Thrilling 30 Generations Deluxe Class toys, and similarly to Decoys, the Autobot figurines are cast in red plastic, and the Decepticons in purple.
Part of the first wave of the 2015 Robots in Disguise line, Optimus Prime is a smaller-scale toy. He transforms from robot to trailer/truck combination and back! Like every Robots in Disguise Legion Class toy, Optimus features 3mm posts on his hands and arms. Due to the size and simplified transformation, he ends up having 6 wheels instead of 10. His scannable Autobot insignia is on his robot mode left shoulder. However, the badge is completely impossible to scan in vehicle mode.
This Optimus Prime is an extensive screen-accurate redeco of the Dark of the Moon Supreme Class/Leader Class Striker retool, using the Ion Blaster accessory from the Buster Optimus Prime and the Toys R Us Japan-exclusive battle blade accessories. He also comes with the Knuckle piece and the Battle Hooks and uses the 2-2-1 articulated fingers featured from the second Asia Premium Series release. He also features a Japanese language sound box for his voice gimmick, replacing Peter Cullen's "I am Optimus Prime" voice line.
Released in conjunction with Japanese cellphone maker au, au x Transformers INFOBAR Optimus Prime celebrates 15 years since the 2002 au Design Project that resulted in the INFOBAR cellphone, as well as the 10th anniversary of the live-action films. He transforms into a (non-functional) scaled-down replica of the 2002 au INFOBAR, and in lieu of cellphone functions, the figure can be paired via Bluetooth with a smartphone, such as an iPhone, to act as a notification alarm in either robot or INFOBAR mode. The screen is also non-functional, but pre-printed cards are included which can be slid into the screen to show an Autobot logo, Decepticon logo, a mockup of a cellphone home screen, or a technical "Transformers INFOBAR" design. The figure also includes a display stand.
The term Generation 1 is a retronym; the series was simply known as "Transformers" until the release of the Generation 2 series. However, the term has become semi-official, as both Hasbro and Takara have referred to this era as "Generation 1". New characters are still occasionally added to the line, primarily by E-hobby. (Examples: Sunstorm, Hauler, Detritus, and the like.) Large-scale production of new characters in this line ended with the onset of Generation 2. Transformers fans often are very upheld with the G1 community. This has led to controversy among fans who consider G1 to be the only "pure" form of Transformers.
Takara's release of Optimus Prime the following year made a few changes, noticeably replacing the gold paint and plastic of the Hasbro toy with bright yellow and much brighter gold. The deco has been tweaked to be a bit closer to the original prototype glimpsed in early catalogs, with yellow added back to cab Prime's feet and the cab grill painted silver, and the Super Mode's waist getting much more paint. This version of the figure was never burdened with the mobility-inhibiting shoulder tabs. Completing the Super Mode combination triggered a new clip of Prime shouting "Convoy, ready for battle!" in Japanese instead of generic mechanical sounds. Late in the run, JUSCO stores offered this toy with blind-packed "Space Galaxy" versions of the individual Destruction Mini-Con Team members, one toy per box.
Here is another thing, people complain about the presence of stickers in a LEGO set. I have news for them, stickers keep down the cost of a set. The latest modular building will have stickers with it, but it isn’t the last time a set geared toward adults will have stickers with it. At least LEGO listened to our wishes and got rid of STAMPS (Stickers across multiple pieces). Still that modular will be the only set that will have a red baseplate and printed golden star tiles. Translation, that set will be very hot on the secondary market when it is retired. It is going to be very hard to source out the baseplate if people try to build Palace Cinema by sourcing its parts. (Which is a project some are doing with Cafe Corner and the UCS Falcon)
Based on his appearance in War for Cybertron, Generations Optimus Prime transforms from a red, blue, and silver robot into an "armored truck mode." He comes with a hand-held rifle that is held via either of its two 5mm posts, and can fold up to store in either mode. He features additional 5mm ports on his forearms, roof, and front-wheel panels. Optimus has a stylized sculpted Autobot insignia on his back, as seen in the game, but it is obscured by kibble.
We're sure we're not telling you anything you don't already know when we say that Hot Wheels are miniature die-cast cars with dynamic multi axular momentum technology (ie, they roll). They are usually based on real-life production cars but sometimes are modeled after bad acid trips, with wheels added later (for the rolling). Shortly after the introduction of the cars, Mattel launched various tracks to take full advantage of the cars' rollability.
If you're still on the fence about Masterpiece MPM-5 Decepticon Barricade, or are considering purchasing Masterpiece MPM-6 Ironhide (which is also currently available), now might be a great chance to grab this Amazon.com exclusive figure from Hasbro. As of this writing, MPM-5 Barricade is currently on sale at Amazon.com for $52.13, which is 35% off the regular retail price of $79.99. Part of the special deal is that he's also available for "FREE" One-Day shipping for Amazon Prime members. Order - Read More
Unite for the Universe Optimus Prime would have been a redeco of the 2007 Optimus Prime Voyager-Class mold in a similar style to the Leader-Class Buster Optimus Prime (see below), with a much more accurate and detailed paint scheme, including white stenciled flames. He would have come with a set of Jetfire armour parts to form the powered-up Optimus Prime seen at end of Revenge of the Fallen, and due to not having to form Jetfire's robot mode or his jet mode, the armour parts are far more accurate to the movie's design of them than the leader class Jetfire toy could manage. While not combined to Optimus Prime, the armour can be arranged to form a sort of weapon emplacement mode or a jet engine on the back of Optimus's vehicle mode.
The TakaraTomy release of Optimus Prime has considerable differences from the Hasbro release. His blue and red plastics are darker and metallic, his translucent blue plastic is darker, and a few of his paint operations have been omitted and replaced with customer-applied foil stickers, such as his shins, feet, headlamps, and insignias. His legs, outer forearms and truck mode "sleeper cabin" side panels have been retooled to include 5mm post-holes as part of the line-wide "Arms Micron" gimmick. As such, he does not come with the Hasbro version's weapons, but instead an Arms Micron partner named O.P. who transforms into a weapon resembling Optimus's in-show blaster cannon. This version of the mold was also used to make Prime Nemesis Prime.
In the aftermath, Victorion believed trying to find the Requiem Blaster was a fool's errand, and that they should have been preparing Optimus Prime's funeral instead. The Swamp Megatron often thought of Optimus, noting the similarities between him and Optimus Primal Primal and wondering what his old rival would think of his heroic exploits. Consequences Ultimately, thanks to his connection to the Matrix and the Primes, Optimus's spark was freed from the Well and revived after Megatronus's defeat, to the joy of his companions. Mourning the sacrifice of Megatron, whom he considered a brother, he commended Optimal Optimus for being a fine choice as the new Matrix-bearer, and began teaching him the ways of Cybertron, promising to support him in his new leadership role. Saga's End
Every two weeks, Seibertron.com brings you a Top 5 list related to all things Transformers written by me, your fellow editor. These are our opinions so what matters most is what you guys think of the topic or list, and I hope to see your own lists or comments on omissions and ranking. Let's have fun! All previous lists can be found here. Top 5 Best Cliffjumper toys With Cliffjumper having a surprise appearance in the Bumblebee movie I figured we were due for a rundown of the best - Read More
The Hot Rod from the future animated movie continuity would also appear. Target: 2006 had Hot Rod, Kup and Blurr timejump from 2006 (specifically partway through the Transformers movie) to 1986 to thwart Galvatron's scheme, under the influence of Unicron; later post-movie stories revealed that Firebolt had died on Earth years before 2007, and Space Pirates had Rodimus Prime briefly reverting to Hot Rod during the Quintesson attack on Autobot City. This Hot Rod also appeared in several of the "Aspects of Evil" stories. Told from the flashbacks of an aged Rodimus Prime, these had Hot Rod come up against some of the greatest Decepticon villains. He accepted the surrender of Scorponok - only to wind up defending him and a human town against the Micromaster Air Strike Patrol: defending Autobot City from a full-scale attack by Shockwave: and being captured and used as a pawn by Megatron to flush out an Autobot spy in his ranks. (Marvel UK #223-227)
A retool of Crash Combiner Optimus Prime available in a two-pack with Grimlock, featuring a new Optimus Prime-ish Combiner head and new arm parts with a green dinosaur-themed front shoulder pads, and he features a lighter shade of red plastic. Like the previous versions, Optimus Prime can become the top half of any Crash Combiner gestalt, though his official combination is with Grimlock as Primelock.
Another version of Prime was also available in the second wave of the Smallest Transforming Transformers series as a chase figure. This almost entirely white version of the figure is clearly based on the version of the original Prime cab robot used in the Generation 1 Ultra Magnus figure, but was nonetheless sold as Optimus Prime for the Smallest line.
A single-packed version of the battle damaged Voyager Optimus Prime toy from the Sam's Club exclusive three-pack. Although the assortment number and the general packaging style seemed to indicate that this might be a Best Buy exclusive, this has been confirmed to be an "international market" exclusive. It has been released in Asia, but will presumably not be available in the USA outside the Sam's Club three-pack.
He comes with a MechTech rifle converts into a large battle axe, and can be locked in by pulling the lever all the way in and tilting it into a gap to the left. The rifle has a separate flip-out handle, while the axe uses the rifle's long barrel as the handle, meaning that Optimus can grip the axe with both of his hands. This weapon was also retooled in a running change, adding a stop to the handle instead of relying solely on the gear system to prevent the locking assembly from flying off into parts unknown.
the one the left was a design that i hated from the start. just doesnt look like what a Transformer is supposed be. the one on the right is almost there but not quite. a very welcoming design though. its what Prime should have looked like from the start. To say it is too 80s, well the first film should have taken place in the 80s, not present day. The Transformers are icons of the 80s. You make Cybertron in the future tense all futuristic and alien-ish and whatnot, but on earth you make it in the 80s.
In the event that Windcharger successfully turned the Decepticons’ forcefield off, reinforcements burst into the base just as Megatron was strike Optimus from behind. A wayward shot from Megatron then revealed the location of the gravity gun to the Autobots. Optimus ordered his troops to charge the weapon. Hook caught Optimus in the gravity gun’s sights, and sent the Autobot leader floating upwards.
Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.