The designs for the original 28 figures were made by Kojin Ono, Takashi Matsuda, Hideaki Yoke, Hiroyuki Obara, and Satoshi Koizumi. Hasbro would go on to buy the entire toy line from Takara, giving them sole ownership of the Transformers toy-line, branding rights, and copyrights, while in exchange, Takara was given the rights to produce the toys and the rights to distribute them in the Japanese market.
In one of his less impressive moments, after running out of ammo during a battle with Deathsaurus, Optimus Prime ordered his fellow Autobots to improvise and hurl everything that wasn't nailed down at their enemy. This included the Blackball, unfortunately. Catching it, Deathsaurus began to fantasize about his inevitable galactic conquest, all the while being pelted with rocks and litter. Frustrated, Deathsaurus accidentally hurled the Blackball back to the Autobots in a fit of rage. Good Job! Deathsaurus!!
Prime's trailer unfolds via a spring-loaded transformation mechanism in a battle station that is positively bristling with varied weaponry. In addition to the disc launcher, it is armed with a "ripple-fire" missile launcher that fires five missiles, an air-powered rocket launcher like the one previously seen on Hero Optimus Prime, and a small laser cannon that mounts on the base's main tower. Both the missile launcher and laser cannon can disconnect and be held by Prime; his LED-fist will illuminate the laser cannon like it does his sword. Additional missiles and a second rocket are stored in grooves inside the sides of the trailer.
the one the left was a design that i hated from the start. just doesnt look like what a Transformer is supposed be. the one on the right is almost there but not quite. a very welcoming design though. its what Prime should have looked like from the start. To say it is too 80s, well the first film should have taken place in the 80s, not present day. The Transformers are icons of the 80s. You make Cybertron in the future tense all futuristic and alien-ish and whatnot, but on earth you make it in the 80s.
Being a Combiner Wars Voyager, Prime is naturally capable of transforming into a torso mode to combine with any 4 Deluxe Class Combiner Wars-style toys, though his packaging call-out has him form Ultra Prime by combining him with Deluxe Class Skydive and Alpha Bravo as the arms, and with Firefly and Decepticon Drag Strip as the legs. He can combine with Sunstreaker, Mirage, Prowl, and Ironhide if one wishes to have an IDW-accurate Optimus Maximus.
It uses the 1985 post-rub mold, no metal plates, and the trailer's launcher fires short(this can be modded with some disassembly, Toy Polloi has a video showing how). The wheels roll a bit iffy, this is a common documented issue. Personally I believe there is a slight molding error in the robot, the legs do not seem to fold down quite as far as an official cab's legs do, causing a very slight lean backwards.
Best IDW Transformers Comics Stories - The IDW timeline/universe/story that started in 2005 has ended and I personally believe it includes the best Transformers fiction involving our favourite G1 characters. Of course comics can be daunting to get into and I won't pretend every single story was a gem. But there was some stellar storytelling here, the best these characters ever got and I will go through the 5 best stories from this 13 year run that any Transformers fan should check out asap. The titles link to the comics on comixology in case you want to check them out.

The Autobots continued to guard humanity in secret for many years, until one day in the 21st century when Ratchet was captured by a human group known as Skylogic Systems. Upon investigating the organization, Optimus Prime and Bumblebee came into contact with the Lone Gunmen, three humans who were also on Skylogic's tail for their role in creating a dangerous virus. Learning from them that Ratchet's DNA was part of the concoction, the Autobots joined forces with the humans and helped track down David Simmons, the man responsible for releasing the virus. One interrogation later and they had the address to the Skylogic base, though Prime's size prevented him from easily infiltrating the building, so he left the rescue mission up to Bumblebee and the Gunmen. Once Ratchet was saved, the Autobots parted company with their new human friends in an attempt to lure away any Skylogic pursuers. The X-Files: Conspiracy: The Transformers
In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film.[21]

In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.
Came with the Mini-Con Sparkplug. Could combine with Armada Jetfire (and its repaints) and/or Armada Overload (and its repaints). The trailer could convert into a base for Mini-Cons. In Japan a gold chrome edition of this toy was released as a Lucky Draw special. With its trailer the vehicle mode of this toy bears a great resemblance to G1 Star Convoy. According to the Armada video game Armada Optimus Prime is supposed to be 22 feet 10 inches tall (696 cm tall) and the toy is 17.5 cm tall. So that's a scale of 1:40.[55]
↑ The African American entrepreneur: then and now By W. Sherman Rogers page 321. Books.google.com. http://books.google.com/books?id=mbTUorcuXkoC&pg=PA321&dq=%22generation+2%22+transformers&hl=en&ei=woyoTPq8KI7hnQeIwOWjDA&sa=X&oi=book_result&ct=result&resnum=5&ved=0CD8Q6AEwBA#v=onepage&q=%22generation%202%22%20transformers&f=false. Retrieved 2011-04-04.
A repaint of the Armada Supercon Optimus Prime, minus the Mini-Con, but instead had a Cyber Key with a Mini-Con port in it. Repainted to match Cybertron Galaxy Force Optimus Prime. This is supposed to be a drone which Optimus Prime controls to get into small places, built for him by Metroplex. Several paint variations of this toy exist, and early releases have the forearms swapped, just as had occurred with the last repaints of the mold.[61]
Optimus led the search for the AllSpark through space, but he and his troops were unable to locate the artifact. Though the search seemed hopeless, Optimus assured the others that they would not give up until Cybertron's last hope for survival was found... At that moment, a strange green pig crashed through one of the ship's windows, with the AllSpark in tow. Optimus stared in bewilderment at the strange creature as it asked for a ride back home. Hard Boiled

Available exclusively from Japanese clothing company A Bathing Ape in 2017, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a unique black color scheme matching the Convoy Reissue BAPE Ver. BLACK of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
Q-Transformers Optimus Prime is a tiny super deformed toy based on the Alternity Convoy design, transforming into a Nissan GT-R R35, though his legs retain the traditional blue truck bed motif. The English name on the packaging refers to him as just "Optimus". He comes with a code for unlocking "GTR Optimus Prime" as a playable character in the Q-Transformers: Mystery of Convoy Returns game. Standing at only slightly less than one inch and a half, this is actually the smallest transforming Optimus Prime ever made, which is a fairly impressive feat considering the surprising amount of detail in sculpt and paint apps.
Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces.
The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.[6][7]
The conclusion to the storyline was forestalled when Hasbro retracted 3H Enterprise's license, but an explanation can be found in issue 8 of the Transformers Collectors Club magazine, Cybertron/Robots in Disguise. In this issue, Prime tells the tale of how Unicron's forces were defeated in the last battle by Optimus Primal's forces and Unicron disappeared into the black hole opened in Transformers: Energon. Combined as Omega Prime, they could not escape fast enough, and were sucked into another dimension.

This minor redeco of the Optimus Prime Launcher features grey wheels, blue optics, and added red paint on its upper arms, while the launcher has grey plastic in place of black, smaller Autobot symbols on its sides, and gold paint on its interior instead of silver. The stock photography on the packaging depicts Optimus with a blue stripe on his built-in "trailer", which was omitted in the final product.

Just like Optimus Primal's basic bat toy, this figure was released during the short-lived period when the Beast Wars was still considered to be an extension of the Autobot/Decepticon war, and Optimus Primal was the same character as Optimus Prime. This was soon relegated to the realms of micro-continuity when the Beast Wars animated series began and clearly established that the two Optimuses were different characters, but the toy remains one that was officially branded as Prime, and is consequently listed here.


The main build of the set is a massive vehicle based on Optimus's truck cab, capable of seating a single Kreon in the driver's seat. Pushing the trailer-hitch on the back end towards the cab opens up the front grill, revealing a huge spring-loaded rocket launcher with rubber-tipped projectile. The cab can also stow the included stasis pod ussed to lock away the baddies.
MATTY COLLECTOR SPECIAL SALE If you missed out on the original Matty Collector figures, you’re in luck; many items are back in limited quantities! https://www.bigbadtoystore.com/Search?T ... geSize=100 ------------- NEW PREORDERS ------------- TRANSFORMERS STUDIO SERIES Reach past the big screen and build the ultimate Transformers collection with Studio Series figures, inspired by iconic movie scenes and designed with specs and details to reflect the Transformers movie - Read More
It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
Came with the Mini-Con Sparkplug. Could combine with Armada Jetfire (and its repaints) and/or Armada Overload (and its repaints). The trailer could convert into a base for Mini-Cons. In Japan a gold chrome edition of this toy was released as a Lucky Draw special. With its trailer the vehicle mode of this toy bears a great resemblance to G1 Star Convoy. According to the Armada video game Armada Optimus Prime is supposed to be 22 feet 10 inches tall (696 cm tall) and the toy is 17.5 cm tall. So that's a scale of 1:40.[55]
Accompanied by Prowl, Optimus went to Sumatra and discovered much of the jungle had been destroyed. The Decepticons tried to destroy the Brazilian jungle and take its oil, but once again the Autobots stopped them. Storms of Destruction Following a battle between the Dinobots and the Decepticons, Optimus ordered Slag be repaired by Ratchet at their Antarctic oil supply. Tracking Slag, Megatron attempted to destroy the base with the Crusher, slicing icebergs off the continent. Optimus ordered Autobot superjets to counterattack, but the battle was won when Megatron unwittingly reawakened hundreds of dormant Dinobots beneath the ice. Jaws of Terror Optimus and Prowl were baffled by Megatron's next strategy, a series of hit-and-run attacks in the Pacific rim. It emerged it was a distraction from the enslavement of the population of Buru. Optimus, Prowl and the Dinobots arrived and fought off the Insecticons, foiling the scheme to drain the island's oil. Slaves of the Insecticons When Megatron planned to drain the world's largest supertanker, Optimus had the oil tainted with a corrosive acid, sabotaging the Decepticon submersible. The Autobots flew the tanker to New York City, and ordered the few witnesses' memory to be wiped. Wow. Attack of the Decepticons
In 2007, following the release of the Matrix's energy, Prime began to suffer from visions which foretold a great transformation for Cybertron. Events began with the Decepticons' theft of the key to the Plasma Energy Chamber, which forced Prime to consult Alpha Trion within Vector Sigma. Prime learned that the mega-computer had orchestrated events in order to restore Cybertron's Golden Age. When the Plasma Energy Chamber was opened and threatened to drive Earth's Sun supernova, Spike Witwicky and the Nebulans, who had become involved in the conflict as a result of these events, were able to drain off the excess solar energy and revitalize Cybertron. With the Decepticons driven off Cybertron and Nebulon free from tyranny, Cybertron enters into a Golden Age of peace and prosperity under the leadership of Optimus Prime and the Autobots.
EZ Collection Gum Convoy is another redeco of Generations Legends Class Motorbreath, featuring the retooled parts, but this time omitting the sword. He is decoed once again in his Generation 2 colors (see above), with the black legs, but uses metallic red plastic, and is coated in metallic red, blue, and black paint. As per the toyline's name, he comes with a yellow candy-shelled piece of lemony-flavored gum.
MP-10 Convoy, advertised as a "perfect new model" on its packaging, is an entirely new tooling of Generation 1 Optimus Prime. Convoy is now smaller, making him more in-scale with other recent Masterpiece toys, such as Rodimus, and comes with a trailer and various accessories. While the front of the vehicle mode's cab is an accurate depiction of a mid-to-late-1980s Freightliner FLT cabover, the back half, (which is, as usual, made out of Convoy's legs) is much larger and robot-leggier in proportion. (So much that they sculpt a ladder on each side.)

Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
When they could not reanimate him, they used his body as a lure instead, bringing the Autobots to their lab, where they are infected. As this "Hate Plague" began to spread across the galaxy, Sky Lynx retrieved a Quintesson, who fully restored Optimus Prime to life. Coating himself in Morgan's heat-resistant alloy, Prime reclaimed the Matrix from Rodimus and unleashed its concentrated wisdom to destroy the Hate Plague.
The Hot Rod from the future animated movie continuity would also appear. Target: 2006 had Hot Rod, Kup and Blurr timejump from 2006 (specifically partway through the Transformers movie) to 1986 to thwart Galvatron's scheme, under the influence of Unicron; later post-movie stories revealed that Firebolt had died on Earth years before 2007, and Space Pirates had Rodimus Prime briefly reverting to Hot Rod during the Quintesson attack on Autobot City. This Hot Rod also appeared in several of the "Aspects of Evil" stories. Told from the flashbacks of an aged Rodimus Prime, these had Hot Rod come up against some of the greatest Decepticon villains. He accepted the surrender of Scorponok - only to wind up defending him and a human town against the Micromaster Air Strike Patrol: defending Autobot City from a full-scale attack by Shockwave: and being captured and used as a pawn by Megatron to flush out an Autobot spy in his ranks. (Marvel UK #223-227)
But in between those two most well-known alternate modes, Bumblebee has had at least six others. For the Transformers: Alternity Japanese toy line, he was a yellow Suzuki Swift Sport, which at least is still a small, quirky car. Ditto the AMC Pacer, the form he took when he travelled back in time to the ‘70s in a G.I. Joe vs. The Transformers crossover comic. Somewhat similarly, he’s a Supermini police car in the Transformers Animated series. But then he’s also been a couple of other muscle cars: as the Timelines Deluxe Goldbug toy, he’s a Chrysler ME 412 concept car, and in the Transformers: Prime animated series he can take the form of the fictional Urbana 500 muscle car. Bumblebee also has a number of different Cybertronian vehicle modes.
A Voyager-class two pack of Classics Optimus Prime, representing the Generation 1 version of the character, and a redeco of Age of Extinction Evasion Optimus Prime representing the Movie character (The deco patterns is most likely to emulate the character's design in 2007, with vague results). Like Rusty Optimus Prime (seen below), he features flames on his vehicle mode doors.
The 5-inch Power series is a little more complex (4-9 steps) and a little more spoilery, because it’s the first hint we’ve gotten that Megatron might be a part of the Transformers: Bumblebee movie. Sporting a similar form to previous versions, his alt mode is a 4-track Cybertronian tank (with the usual very conspicuous face…funny how a lazy toy design decision from the first movie has now become cannon). The Power series also has the only Dropkick Energon Igniters toy. You can use the cores sold with the Power Plus and Nitro toys to unlock special features. Camaro ‘Bee and Hot Rod round out this series.
The main Prime line in Japan, while mostly using the same molds, was quite a bit different from the Hasbro version. Hoping to snag a slightly-older market, the toys were given a bit of "model kit" vibe. Paint operations were reduced and replaced with old-fashioned sticker sheets, so you had to customize/complete the toy itself... and then there was the blatantly model-kit Arms Microns packed in with every toy.
Then he dreamed of awakening, only to find his troops smashed. Realizing his only hope for survival lay with Cybertron, Optimus then boarded the ship the Autobots were repairing, and travelled back to his home planet. Arriving on Cybertron, he found it completely under Decepticon domination. Optimus then met an old Autobot codger who pleaded that he return to Earth to gather a force that could overthrow the Decepticon’s regime. Optimus remorsefully told the old Autobot that there could be no reinforcements from the planet Earth. The two Autobots were then swarmed by Decepticon police officers, who Optimus fought until his dying breath…
Hot Rod has a youthful attitude, and serves as an older brother figure to Daniel Witwicky, son of Autobot ally Spike Witwicky. He has a sort of mentor-student relationship with the veteran Autobot Kup. He was also good friends with Springer and Arcee. Later in life, he temporarily bears the Autobot Matrix of Leadership and becomes Rodimus Prime (Rodimus Convoy in Japan), and new leader of the Autobots.
Hasbro executives, high off the revival of G.I. Joe through the same marketing concept, decided to acquire rights to toys from a variety of Japanese “Super Robot” series. Transformers didn't introduce the concept of super robots to the United States, but for the first time, the genre became widely recognized and popular outside of Japan. As the Transformers brand grew throughout G1, it began to define the genre, and all other super robots were measured competitively to Transformers' standard.
Hot Rod would appear in the UK Marvel comic issue #234, "Prime's Rib!" This story is set in the near future, 1995, where Optimus Prime, Jazz and Hot Rod introduced the latest Autobot, Arcee, to the human feminists. She was met with displeasure by the humans, being called a token female and disliked for her pink color. They were then attacked by Shockwave, Fangry, Horri-Bull and Squeezeplay, who thought the Autobots would be unveiling a new weapon. The Autobots fought off the Decepticons, who escaped, but nothing seemed to please the human feminists.

Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.
This mold was redecoed by Takara in 2000 as Car Robots Black Convoy. The following year, it was released by Hasbro as Black Convoy's 2001 Robots in Disguise franchise counterpart, Scourge, with retooled discs that lacked the Autobot insignia. Following this, the next use of the mold was planned to be Universe Toxitron, which ended up being canceled. The modified tooling was also used when Laser Prime was reissued by Takara in 2006 with a modified deco (see below), and for the e-Hobby exclusive Laser Ultra Magnus that accompanied the reissue's release. In 2015, Platinum Edition Year of the Goat Optimus Prime, another repaint version, comes with partially transparent plastic torso.
Optimus Prime narrated the events of what happened before the Ark crashed on Earth. He became the new leader of a long line of Autobot leaders via the discovery of the Matrix. On their quest for more Energon, the Autobots were chased by Decepticons to the planet known as Earth and crashed on it. When they emerged from the Ark, Optimus Prime scanned his truck altmode, stating that the war would not end on Earth. Action Blast 1
Studio Series Optimus Prime is an all new Voyager Class mold that transforms from robot into a Peterbilt 379 semi-truck. He comes with a pair of Energon Swords, which can be mounted onto his arms or store on the back of his robot mode or truck mode. The figure combines engineering concepts from his Age of Extinction Voyager Class figure with techniques previously used on Prime: First Edition Optimus Prime. He also features a more subdued color scheme compared to other Optimus Prime figures. Like the rest of the Studio Series figures, the figure prioritizes robot mode scale and thus stands shorter than his Voyager Class wavemate Starscream. The CG renders depict him possessing long smokestacks, but the final product has them shortened... again. He also comes with a cardboard backdrop display depicting the climatic forest battle from Revenge of the Fallen.
A Deluxe-sized figure sold only in Japan and Asian markets by Takara Tomy. The package consists of a highly poseable skeletal frame called a Core Body, along with parts to assemble the Core Body to either a Protoform mode or robot mode. In Protoform, the figure can transform into an atmospheric Entry Mode. The figure with robot parts is able to fully transform into vehicle mode.[87]
The paint deco is... unfocused, to say the least. In vehicle mode, the grill, headlights, bumps (thus his feet) are painted silver, yet the red in the small Autobot insignia has been removed. There is silver paint on the fuel tanks (toy battery cover), but not on the other tool boxes and equipment in the same location. There is also silver paint on all 6 wheel rims, the air cleaners and the windscreen visor. In robot mode the silver paint is mainly located on his thighs and crotch, though in order to save on costs, the dark blue and gold paint on his thighs and knee joints have been sacrificed.
Aware of the changes to the timestream and the potential for the entire Autobot race to be annihilated by Unicron, Optimus put into motion Operation Distant Thunder, a plan to undo the damage to the timeline caused by Ravage, restoring the events that were seen in the movie. This would mean that saving all the Autobots from Unicron would result in Prime and others such as Prowl, Wheeljack, Ironhide, and Ratchet would die per the original events. They hoped they would be able to at least partially avoid such an outcome by sending a message to their past selves about all they had learned.
Later, at the peace celebration, Prime was watching a procession of Autobots when Decepticons attacked. Optimus ordered Omega Supreme into action but the huge Autobot was quickly overcome by Menasor, Piranacon and Predaking. The Art of War #3 Prime hopped into the fray, saved a civilian from getting smushed by the falling Omega, rode Sixshot into Piranacon's face, smashed Astrotrain into the ground, and carried a wounded civilian out of danger.
Somewhere along the line, G.I. Joe picked up the familiar storyline that we all best associate with the toys: G.I. Joe Team vs. the Evil Cobra Organization. A classic tale of good vs. evil. Well guess what. Somewhere else along the line the franchise picked up a very different storyline and a new look to boot, highlighted by the newest figurine: The DARK NINJA MASTER.
He is designed with a removable head, biceps, arms, and legs, all of which use the same clip-peg/hole joint. This means his pieces can be swapped around in any order, as well as swapped with any other Hero Mashers figure... which includes figures from Marvel Comics, Star Wars, and Jurassic World, meaning you can make some pretty freaky combinations.
The only differences with the unreleased version, aside from the packaging, are that silver paint has been added to the previously unpainted grill/fender area, the blue paint operations have been changed to teal, and the red Autobot insignias have been replaced by purple Decepticon ones. Prime's bio apparently explains that he took on this new color scheme in order to infiltrate the Decepticon ranks, in response to recent attacks by some new Decepticon forces pretending to be Autobots.
Bumblebee, being the popular character he is, was one of the first five characters inducted into the Hall in 2010, during a ceremony at BotCon; the convention for all things Transformers. He was joined, not surprisingly, by other super-popular transformers: Optimus Prime, Megatron, Starscream, and the Dinobots. Humans enshrined in the Transformers Hall of Fame over the last few years include everyone from director Michael Bay to Peter Cullen (the iconic voice of Optimus).
In Transformers: Alliance, Optimus Prime and the Autobots aid the human soldiers after the battle in Mission City and destroy the Allspark-powered machines that were created. A trailer is obtained for Optimus Prime to carry the remains of Jazz. The Autobots leave Mission City as the Sector 7 personnel arrive to claim the remains of the Decepticons. About a month later, Epps and Lennox contact Optimus Prime about aiding them in escorting the remains of the Decepticons to the naval yard. They are spied on by Barricade, who transmitts the information to Starscream.
In his first appearance in the series, Optimus looks similar to the original G1 Optimus Prime until he copies himself with a semi-truck and his design in robot mode changes to the image shown here. Soon after, he retrieves his Mini-Con partner, Sparkplug. The cab of his truck mode detaches to form Optimus himself, while the trailer transforms into a battle station mode operable by Optimus and several Mini-Cons. Optimus can also combine with his base to form a "Super Mode" robot that, when combined with Sparkplug, can fire a series of powerful lasers. Additionally, Optimus can combine with Jetfire and/or Overload in his Super Mode for additional power.[49]

The instructions neglect to mention that the entire roof of the cab is on a concealed hinge which greatly eases the difficulty of Prime's transformation. For whatever reason, the instructions treat the toy as if the hinge does not exist, going so far as to show Prime's head magically clipping through his chest to transform. The instructions also neglect to mention that his heel/bumper pieces must be slid out until they click, making the figure just that bit more stable, and that the rotating truck door panels on his upper arms can be pulled further out (but not off) from their sockets, allowing more space for the panels to swing around his hood-arms during transformation.
Today, generally the creator sets only emphasize Lego as a building system. They come with pieces and instructions for two alternate models. Generally, Creator sets utilize a more basic color selection and look less “realistic” due to the emphasis on a versatile piece selection. Contrast that with current licensed themes and even Lego’s own proprietary themes. Themed/licensed sets are now trying to achieve more “realistic” models. As a result, piece and color selection skews toward more specialized pieces and colors again making the “critical mass” of pieces harder to achieve.

The bio for the Botcon 2015 version of Megatron reveals that he comes from an alternate reality where Megatron achieved victory during events similar to Dark of the Moon and killed both Optimus and Sentinel Prime. However, Rodimus Prime then arose to challenge him, facing him in a battle that Megatron ultimately chose to flee, resulting in him ending up in the Axiom Nexus.


Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[38] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[39]
×