Oddly, he had a different plate in those films when in car mode: 900 STRA. In Dark of the Moon, they finally decided to keep his robot and car mode plates consistent. In robot mode in the Dark of the Moon and Revenge of the Fallen video games, he wears 5BBM2. 5LKZ213 was seen in some set photos of robot mode for the first film. Various models for promotional exhibits have featured KDM 0814, FXPERTS, and, of course, BUMBLBE.
It uses the 1985 post-rub mold, no metal plates, and the trailer's launcher fires short(this can be modded with some disassembly, Toy Polloi has a video showing how). The wheels roll a bit iffy, this is a common documented issue. Personally I believe there is a slight molding error in the robot, the legs do not seem to fold down quite as far as an official cab's legs do, causing a very slight lean backwards.
While the other Autobots searched for the Matrix on Earth, Optimus Prime searched for Vector Sigma, guided through the dangers of the planet's catacombs by the spirit of Alpha Trion. Prime eventually arrived at the computer, only to find his way barred by Cyclonus and Scourge. At that moment, Hot Rod arrived with the Matrix, the same with which Alpha Trion merged, re-energizing it. The Matrix transformed Hot Rod back into Rodimus Prime and, for the first time, the two Primes fought side-by-side and defeated Galvatron.
This is a weird one. Back in the late-’80s, the original TV show had ended and Marvel Comics decided to take the “transform” part of the property a step further and gave a handful of Transformers an organic, human-looking shell. Bumblebee was one of the lucky Autobots to get one. According to the storyline, the Decepticons developed the technology first, but the Autobots secretly caught wind, made their own human shells, and fooled the bad guys into thinking they were fighting mere humans, until they burst out of their shells.
Part of the first wave of the 2015 Robots in Disguise line, Optimus Prime is a smaller-scale toy. He transforms from robot to trailer/truck combination and back! Like every Robots in Disguise Legion Class toy, Optimus features 3mm posts on his hands and arms. Due to the size and simplified transformation, he ends up having 6 wheels instead of 10. His scannable Autobot insignia is on his robot mode left shoulder. However, the badge is completely impossible to scan in vehicle mode.
Like many other modern toys, Optimus was designed with an alternate head sculpt (based on the mouthplate-less face as seen on the show) intended for a later retool, which was gang-molded with the original head. At least one specimen sporting the mouthplate-less head has been found at retail, although since this occurrence has seemingly been limited to an isolated incident, it can be assumed to be a manufacturing error rather than a genuine variant.[6] The mouthplate-less head sculpt was eventually used officially for a later-wave redeco, Nightwatch Optimus Prime (see below).
Legends class Optimus Prime is an extremely simplified toy of the extremely complex movie design. As such, he features numerous unavoidable inaccuracies, such as not transforming or even looking very much like the original design or the larger toy versions in robot mode. However, proportionally Legends class Optimus Prime is not far off from the real truck and the Leader class toy's vehicle mode, aside from missing a smokestack on the driver's side. He is articulated at the shoulders and upper legs via ball joints. He can also hold small weapons, such as Cyberverse.

While they wandered through the tunnels, the Joes and Prime found cave paintings that described the last visit to Earth by the planet-eating god Unicron. They were attacked again by Bludgeon and Cobra-La minions, but were led away by a ragged Joe Colton, prisoner of Cobra-La for the last 25 years. Black Horizon, Part 1 of 2 Bludgeon managed to find them again and during a second battle Prime tore open the Pretender's shell, revealing Bludgeon's robot form inside. Bludgeon tripped and dangled dangerously over a chasm, but rather than let Optimus Prime save him, Bludgeon forced Prime to drop him to his death laughing all the way down.
Something of a shellformer, Convoy Nike Free is colored primarily white and red in his alt mode of a realistic-looking, scaled-down Nike sneaker, complete with (gratuitously long) real fabric shoelaces. In robot mode he incorporates some additional blue and silver in predictable areas and has a somewhat uniquely-shaped yet instantly recognizable G1-inspired head.
The figure also features a hollow trailer (which also serves as his legs), fit for the Warrior Class-sized toys. The trailer can also be converted into a battle station. Because of the toy's design & transformation, he is kinda show-accurate. Optimus also features 5mm-compatible ports on his trailer, arms, shoulders, legs, knees, waist armor, and the pop-out Decepticon Hunters. He also includes many weapons, including his axe with a short handle. The included weapons can also be combined with the Decepticon Hunters into a dual-bladed weapon. All of his included weapons can be wield by any Warrior Class figures, although the accessories are associated with Bumblebee, Grimlock, Sideswipe, Strongarm, Jazz, & Drift.
It uses the 1985 post-rub mold, no metal plates, and the trailer's launcher fires short(this can be modded with some disassembly, Toy Polloi has a video showing how). The wheels roll a bit iffy, this is a common documented issue. Personally I believe there is a slight molding error in the robot, the legs do not seem to fold down quite as far as an official cab's legs do, causing a very slight lean backwards.
This Japanese exclusive release of Optimus Prime features much more black coloring than the previous releases, and it's (coincidentally) based on the Fast Action Battlers Power Armor Optimus Prime toy, so as to be used with the similarly-repainted Legends Jetfire figure to form the Optimus' powered up combination. For some reason, he has red eyes. This redeco also uses the slightly small fuel tank/elbow tabs from the Battle Damaged release.
Part of the first wave of Age of Extinction: Generations Leader Class toys, this is yet another completely new "big" Optimus Prime figure. While smaller than the First Edition toy, this one features more silver and chrome paint in vehicle mode, a more poseable robot mode, and a Vector Shield accessory instead of the Sentinel Shield. Unlike the First Edition figure, Leader Class Optimus Prime's pauldrons and hip-skirts are formed from truck kibble, giving him a marginally smaller backpack. His accessories have roughly the same functionality as the First Edition toy, with his sword being hand-held and pegged onto his hands or storing underneath the truck, and his shield mounting onto his left forearm or storing on the back of the truck. Additionally, the sword sheath underneath the truck can be folded up and used in robot mode.
Though Optimus allowed himself to be destroyed when he betrayed his own moral code while playing a video game, a copy of his mind survived on a floppy disk. Years later, he was restored as a Powermaster, binary bonded to the Nebulan, Hi-Q. Optimus Prime slowly earned the respect of Decepticon leader Scorponok, mourned the loss of his friend Ratchet, and ultimately sacrificed everything to defeat Unicron. Though Optimus died again, his mind persisted in Hi-Q, and the Last Autobot was able to restore him as an Action Master in time to bring a temporary end to the war.
Having launched a painstaking review of each of those 14,200 pieces in the LEGO universe, the Design Lab found that 90 percent of new elements were developed and used just once. And many components were duplicates. Among the dupes were eight minifig police officers and six minifig chefs, with barely decipherable differences between them. The Lab dealt with the redundancies by slashing the total number of components by more than 50 percent. When it reduced the product portfolio’s minifig chef population from six to one, designers protested and longtime fans howled. To calm the fans, LEGO tried humor: it held a mock online memorial service for the “dead chefs.”

Optimus was challenged to a duel by Megatron as a distraction while the Constructicons attempted to strike against Teletraan I. Heavy Metal War - Part 1 Concerned that the Decepticons might try to steal a new Energon related technology from a science facility, Optimus sent Blaster to infiltrate and protect the base. Espionage Optimus was impressed with Grapple and Hoist's plans for a Solar Power Tower, but thought it would be too difficult to defend from the Decepticons. The Master Builders Following the return of the Aerialbots from a trip to Cybertron, they told Optimus and Elita One about how they'd encountered Orion Pax and Ariel. Golden Age Optimus was among the Autobots affected after Megatron sabotaged their recharging chamber. Turned evil, Optimus was sent to attack Rutter Military Base and obtain a solar power satellite. He and the other Autobots were returned to normal by Sparkplug's attitude exchanger, and Optimus promised to repair the base. Attack of the Autobots
"Optimus Prime Figure" (オプティマスプライム・フィギア)[1] is a redeco of 2001 Robots in Disguise Spychanger Scourge, painted to resemble Movie Optimus Prime. Of note is the tampographed detailing on his chest resembling Movie Prime's distinctive chest design. Like most Spychangers, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly.
Many who received their first LEGO set in the early 1990’s are now adults looking forward to buying a LEGO set for their first child or for themselves. When we are younger, we do not fully understand how money works. We do not realize that a large LEGO set can require hours of work to earn. We only know what we want. I would wager that it isn’t until our first jobs that we can fully appreciate the value of money. We all wanted the large sets as kids and we didn’t realize how hard our parents had to work for them.
A gold chrome remold of the 2007 movie Leader Class figure by Hasbro Hong Kong. Limited to 88 units, with only 10 released to the public at the 2008 Animation and Comic Show convention; all of which were sold only to the first 10 people to spend more than HK$3,000 at the Hasbro booth. Because the figure is permanently fixed to the trophy base, it is no longer transformable.[131]
A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.
In robot mode, Voyager class Optimus Prime is proportionally more accurate to his CGI design than the leader class toy and has a more accurate headsculpt. However, due to the aforementioned lessened complexity, significant sacrifices had to be made, such as "cheats" to the transformation sequence to achieve this. He is thus less accurate overall than he initially appears. In addition to previously mentioned changes, he carries much of the truck's front hood, grill and fenders on his back like a backpack. Nevertheless, he maintains a superb level of articulation and posability.
Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.

Prime's trailer opens up into his Combat Deck, containing the scout drone, Roller. The interior of the Combat Deck features three pegs that can accommodate Prime's laser rifle, fuel pump and nozzle accessories, and seating for two Diaclone drivers. As its central feature, the Combat Deck features a missile-armed repair drone pod mounted upon a boom lift arm (featuring another cockpit for a Diaclone driver), which can also be extended through holes in the trailer's roof and front-end when it is closed. Situated in the base of the boom arm is a spring-loaded launcher that can launch Roller out of the Combat Deck and into action. Roller himself has seating for four Diaclone passengers, and features a port that can accommodate either Prime's rifle or the fuel pump. The interior space of the trailer allows storage room for one standard Autobot car, which can also be shot forward by the launcher.
×