Prime's firing missile and Mini-Con activated gimmicks remain accessible in this mode, but look a bit doofy if you deploy them. The initial Hasbro release of Prime had tabs in its Super Mode shoulders that prevented them from rotating above the horizontal default position, so as not to break the wires that run through the toy's right arm. Coupled with the limited elbow joints, this left Optimus Prime able only to point his weapons towards the ground, and the tabs were removed on subsequent editions of the figure.

"But," we wondered, "How do you listen to music if you're constantly throwing this little robot?" The answer is wireless Bluetooth headphones. Here's a thought: When the music-listening technology that comes with today's yo-yos is cooler and more advanced than the music-listening technology that came with portable CD players in our day, the youth of today officially rescinds its right to ever complain about anything. Ever.
In the grand Optimus tradition, the cab of Laser Optimus Prime disconnects to become the highly poseable robot mode of Prime himself. Like Powermaster Prime and Hero Prime, the toy features the iconic windshield pecs and grill abs, despite not actually being formed from the actual truck components they emulate. In robot mode, pressing the button on Prime's cab (now on his back) activates a red LED in his right fist which illuminates his clear-plastic sword (which stores beneath his legs in truck mode).
Part of the first wave of the Combiner Force assortment, Optimus is a roughly Scout-class sized figure that changes from his futuristic truck with a combiner chest that doubles as his spoiler into a robot in three four extremely simple steps. His individual robot mode only has limited articulation on his shoulders. He also has a little green arrow above the connector on the truck bumper indicating where to crash him to combine with other figures. A 5mm post hole on top of his vehicle mode can accommodate a compatible accessory or Weaponizer Minicon, though he cannot use it in his individual robot mode.
The instructions neglect to mention that the entire roof of the cab is on a concealed hinge which greatly eases the difficulty of Prime's transformation. For whatever reason, the instructions treat the toy as if the hinge does not exist, going so far as to show Prime's head magically clipping through his chest to transform. The instructions also neglect to mention that his heel/bumper pieces must be slid out until they click, making the figure just that bit more stable, and that the rotating truck door panels on his upper arms can be pulled further out (but not off) from their sockets, allowing more space for the panels to swing around his hood-arms during transformation.
Released as part of The blindpacked EZ Collection Real by TakaraTomy's "TakaraTomy A.R.T.S", this Optimus Prime is an extensive redeco of the Revenge of the Fallen Legends Class figure, sharing the same paint mask with the Battle Damaged figure sans the weathering. Like all land-based vehicles in this line, He also features an extra paint applications on the wheels rims. This redeco also uses the slightly small fuel tank/elbow tabs.
"Optimus Prime Figure" (オプティマスプライム・フィギア)[1] is a redeco of 2001 Robots in Disguise Spychanger Scourge, painted to resemble Movie Optimus Prime. Of note is the tampographed detailing on his chest resembling Movie Prime's distinctive chest design. Like most Spychangers, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly.
Both Jet Power Optimus Prime and the accompanying redeco of Voyager-Class Revenge of the Fallen Megatron would have come with an issue of the Unite for the Universe comic book, but due to the cancellation of both figures, the comics were eventually included with the Movie Masterpiece releases of Leader-Class Starscream and Bumblebee. Of amusement is the fact the comics are essentially showcasing toys that have been canceled.

Sold by Hasbro Toy Shop at various conventions, Pepsi Optimus Prime is a repackaging of a virtually unaltered 2005 Japanese Pepsi Convoy. (Again, his stacks are shortened for safety reasons.) However, this U.S. release is, officially, a different character. Whereas the Japanese release's bio explicitly identifies the product as a separate character from Convoy (created with help from NASA, no less), the U.S. bio conversely indicates that their version of the character most definitely is Optimus Prime. His motivation for schilling Pepsi is, apparently, that he wanted a new disguise but basically couldn't be arsed to actually reformat into a new altmode.

It may be that the price of an individual brick has gone down over time, but what does it matter if the size of the bricks has decreased overtime? Sure, the average number of pieces in a set has increased, but how many of those pieces are tiny details? To answer this question, I compiled all the weight data on brickset.com and compared the sets by their price per gram in a similar fashion to how I compared them by price of piece. Below is the chart of my results (prices are in US dollars).
When Vector Prime reminisced on some of the highlights of his multiversal career, he remembered many events involving Optimus Prime. Among these events was Optimus Prime using the Matrix of Leadership on the Hate Plague, Shockwave taunting a disembodied Optimus Prime, and Megatron firing on the head of Optimus Prime, creating a time storm that necessitated Vector Prime's intervention to ensure Optimus Prime's survival. Vector Prime: In the Beginning 

"Convoy Last Production" was the final re-use of the Masterpiece toy mold before it was at last retired after numerous re-releases and redecos. The figure is essentially identical to the original Japanese MP-1 release, aside from a slightly brighter red, and the addition of the words "LAST SHOT" in Transformers typeface molded into the small of Convoy's back, hidden beneath its headlight-flaps in robot mode. Lacking the trailer of MP-4, the figure instead comes with a redecoed version of the electronic base included with Hasbro's "DVD Edition" of the figure from five years prior, which now features a collection of sixteen soundbytes of Convoy delivering famous lines from the Japanese version of the Generation 1 cartoon, recited by the character's original Japanese voice actor Tesshō Genda. The base was promoted as containing a hint as to the identity of the next Masterpiece toy; as it would turn out, this was a new version of Convoy himself (see below), foreshadowed by a sound clip on the base which played only intermittently, and which had Convoy announce that he would "soon be reborn".


Very well written piece. It is very expensive, but as seems to be the trend on here, I would agree you are paying for the quality with LEGO. I like that they have provided the opportunity for adults to build sets with the LEGO Modular buildings range, those sets use real architectural techniques in their construction and are really quite impressive.
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is an extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation 1 and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
He comes with a MechTech rifle converts into a large battle axe, and can be locked in by pulling the lever all the way in and tilting it into a gap to the left. The rifle has a separate flip-out handle, while the axe uses the rifle's long barrel as the handle, meaning that Optimus can grip the axe with both of his hands. This weapon was also retooled in a running change, adding a stop to the handle instead of relying solely on the gear system to prevent the locking assembly from flying off into parts unknown.
This set's Optimusses are based on the Prime incarnation. The larger Optimus is a smaller, simpler build than the first big kit, and makes use of ball-and-socket parts for increased articulation. It also carries a spring-loaded missile launcher. The Optimus Kreon's tampographs are based directly on the Prime cartoon model, though he carries an energon axe akin to the one from the War for Cybertron games. He also has a clear-blue extra "energon" torso piece.

The instruction manual for the MP-04S Convoy Sleep Version reveals a hidden message saying that Rodimus will be the next installment in the Masterpiece series. Concept sketches of the figure were released online in July 2010. The figure is a faithful modern recreation of the original G1 toy. Gimmicks include retractable binoculars, spinning saw blade and the Matrix of Leadership, but the figure's main feature is the ability to transform into both Hot Rod and Rodimus Prime. The transition between the two incarnations involves rotating the face, extending the legs and adjusting the spoiler on the back.
Originally, the Alternators Dodge Ram mold was intended by Hasbro to be a completely different character altogether than Optimus Prime (which character is unknown), but Takara reportedly demanded the Ram be made into Optimus out of fear that the toy (whose vehicle mode is scarce in Japan as a real vehicle) wouldn't sell as well in their market if it wasn't a popular and easily recognized figure; as the figure reportedly cost twice as much to build as the others, Hasbro had to agree in order for Takara to continue fronting part of the production cost. In an ironic turn of events, the Dodge Ram was prematurely solicited by Takara not as "Convoy" (Optimus Prime), but as his Masterforce look-alike Ginrai. As a matter of fact, the head sculpt for the Alternators Oprimus Prime toy is based on the Super Ginrai (Powermaster Optimus Prime's "super mode") toy's head sculpt. Ultimately, however, Ginrai was cancelled, with only Hasbro releasing Optimus Prime as originally planned. Eventually, Takara released the Dodge Ram as as part of the new Kiss Players line, now named "Convoy" (Optimus Prime), and he will be released in Binaltech this year.

In addition, it is very difficult, if not impossible for the vehicle mode to tab together properly. The entire cab assembly breaks apart very easily as the tabs lack sufficient friction to keep it together, resulting in either a gap forming between the front windows and the hood or part of the hood raising up. The pipes that are supposed to connect to the bottom of the smokestacks also don't swing out far enough to properly do so if the feet are tabbed together completely. When attempting to complete the cab assembly, it is advised to apply upward pressure on the front side barrels while pushing the cab downwards. A misassembly error is also present on all versions of the mold, where the roof hinges that connect the sides of the cabin are reversed.


In light of this news, if Optimus decided to nonetheless head back directly to Autobot headquarters, his squad returned to find their comrades nearly dead from the poison. But with Ratchet’s help, the antidote was quickly distributed, and the Autobots sprung back to life. Now cured, the Autobots discussed their next course of action; they had to prevent the Decepticons from poisoning the nearby water reservoir.
Part of the first wave of Prime: First Edition Voyager-Class toys, Optimus Prime transforms into a truck, with a similar (but more complex) transformation to his previous Deluxe-Class toy, and features a faux-kibble window-chest panel as well as a detailed truck cab interior. He comes with a "Cybertronian battle sword" and a "plasma cannon", either of which can peg into his hands. The cannon also features a 5mm peg-hole on the underside of its barrel, allowing the sword (or any other compatible accessory) to mount there as a bayonet. They are stored in vehicle mode by pegging them onto either the 5mm-compatible trailer hitch, or onto each peg-hole beside it, although the instructions tell you to peg the sword facing forwards onto the hitch, with the cannon mounting backwards onto one of the side pegs. His trailer hitch ends up on his right robot leg, and he has a fake, sculpted, equally-usable trailer hitch on his left leg. He features a cardboard stand as with all "First Edition" toys, but the weak adhesive used for its flaps mean it often has trouble supporting the weight of a Voyager class figure for an extended amount of time, the top caving in as the glue gives way.
During the war, Optimus was killed in battle by Megatron, but was eventually resurrected. The Fight Begins Coming to the dire realization that the war against the Decepticons had become a never-ending arms race, Optimus Prime challenged Megatron to single-combat, with their troops acting as witnesses to their terrible and final clash. The battle between both faction leaders ended with Megatron beaten down and goading Optimus into delivering the kill shot...
Optimus Prime led the Autobots to stop Megatron's attempt to cyberform Earth. After discovering that Megatron's new weapon was the Proudstar, Optimus initially tried to preserve the Cybertronian history contained on its Ferrotaxis supercomputer. Inside the Proudstar, he received a prophecy of his future death from Teletraan Alpha, but he merely expressed happiness that his friends would survive. After the Plasma Core was damaged and proved to be too great a threat to Earth, Optimus reluctantly decided to destroy it and the Ferrotaxis in order to preserve humanity's right to forge their own future. When Megatron shot shot the Ferrotaxis into space in one last spiteful effort to stop the Autobots, Prime rode an Insecticon swarm into Earth's orbit for a final showdown with Megatron, ultimately forced to destroy the Ferrotaxis. Once Megatron was again defeated, Optimus called upon the Autobots to stop merely living upon Earth and adopt the planet as their new home. Later, he and Wheeljack discussed plans for the Optimus Maximus project. Transformers: Devastation
This Classics Optimus Prime is a smaller, deluxe-class toy bearing a greater resemblance to the original G1 toy. He was only available in a special Versus pack with a similarly unique Classics Megatron toy and later the FAB version of the 2007 movie Prime. Later releases of this toy had him individually packed in some European countries. His vehicle mode and robot mode is based upon the original toy, but due to limitations in design, budget and gimmick, does not succeed very well. His thighs cannot collapse into his lower legs, meaning they are exposed in vehicle mode, as is his head. Although to be fair, you wouldn't really notice the leg thing if he had a trailer. But, he is greatly articulated.
Another version of Prime was also available in the second wave of the Smallest Transforming Transformers series as a chase figure. This almost entirely white version of the figure is clearly based on the version of the original Prime cab robot used in the Generation 1 Ultra Magnus figure, but was nonetheless sold as Optimus Prime for the Smallest line.
Outstanding work here. After reading a number of complaints about how the price has ‘increased’ over the years, it’s great to see this analytical approach. One additional hypothesis I have is related to the increase in the number of sets released each year, which would appear to be supported by your data. More sets to buy to be ‘complete’ makes for more money out of pocket.

A larger version of Prime, with Advanced Automorph technology and a more complex transformation procedure. Has two sets of electronic sounds and lights that activate when the head pops up or when you press a button on the roof (in truck mode), and a single projectile weapon that can swing over the toy's right hand. Unlike Megatron (whose head is fixed) and Brawl (whose head is connected with a ball joint), Prime's head is limited to side movement due to the circuitry on his LED eyes. This figure has a folding cannon and a firing missile.[76] With this figure standing nine inches tall and Optimus being 28 feet (336 inches) tall, the toy is about 1/37 scale.


He and Metroplex were soon rescued by Bumblebee and Ratchet and they promptly escaped back to Earth, just in time to rescue Grimlock from a Decepticon hit squad. After being misled by a phony distress call, Optimus and his team had to face an assault on the Ark. They repelled the Decepticon attack, but Prime decided that the time was right to go to Cybertron and liberate the Autobots whom Shockwave had enslaved. The Autobots again used the space bridge to reach Cybertron, and mounted an assault of their own on the Decepticon fortress. After fighting their way through the defenses, Optimus and Bumblebee faced down Shockwave himself, defeating the Decepticon with some help from Grimlock. Transformers G1: Awakening
This figure contains an unusual amount of sculpted detail on the inside of the plastic. The gorilla mode's chest has a ribcage, and the inside of the gorilla's face has a sculpted microphone, which lines up perfectly with the robot mode's head! Also, opening this toy's chest in robot mode reveals sculpted detail resembling the Key to Vector Sigma as it appeared in Beast Machines.
This military-colors redeco of the Auto Roller Dirtbag was planned for late Generation 2 and widely solicited alongside fellow redeco Sargent Hound, but never saw release. Transforming into an "earth mover" dump truck, he has an auto-transforming gimmick activated by rolling his rear wheels; roll forward to go to robot mode, and back to dump truck. A switch on his back end separates the gears of the gimmick, allowing him to roll freely in either mode. In vehicle mode, his missiles can peg onto the front end of the dump-bed for storage. In robot mode, he has a twin spring-loaded missile launcher in his right arm, and a clamping "stun gun" claw on the left.
Armor Knight Optimus Prime is a retool of Age of Extinction: Generations Leader Class Optimus Prime. It features a new head sculpt with a rotatable faceplate (one side with the mask, the other without, the whole part rotates), along with other remolded body parts (such as his skirt, feet, and chest), giving it a more screen accurate appearance. He includes more movie-accurate weapons, featuring a new sword and shield, albeit in not-so-accurate colors (the sword's transparent orange blade was also a nod to the sword's "heat up" mode in the concept art.). He is covered in metallic paint, along with additional chrome details on his rims and bumper.
Alternators Optimus Prime transforms into an accurate, fully-licensed 1:24th scale Dodge Ram SRT-10. The vehicle mode features rubber tires, functional steering, opening hood, tail gate and doors with a detailed cabin interior. His robot mode body sculpt details are based upon the 20th Anniversary Optimus Prime toy. However, his headsculpt is based upon Powermaster Optimus Prime. He is armed with a small pistol that is formed from his engine.
A redeco of Cybertronian Optimus Prime with a translucent red front section, additional (painted) "scratched paint" details, some red paint highlights either omitted or changed to yellow and additional yellow circuitry pattern detailing reminiscent of the jammed abilities/mode lock/EMP effect from the War for Cybertron game, available in a Toys"R"Us-exclusive three-pack with redecos of Cybertronian Megatron and Cybertronian Bumblebee.
Additionally, Star Convoy transforms into a large battle station that interacts with the Micromasters that made up the vast majority of the Transformer toyline at the time. His chest contains a peg that allows Micromaster figures to stand inside it in either robot or base modes, and he comes with a unique Micromaster version of Hot Rod not available on its own. He features storage space in his legs for two spring-loaded figure-launching Micro Trailers, and comes with one of his own, decorated in a unique black and orange color scheme. In this mode, two ramps are connected to the Microcarrier; when the carrier's treads are set rolling, they do not move the base, but instead act as conveyor belts that carry Micromaster figures down the ramps. The Microcarrier also spins a gun turret mounted between the conveyors, on which Micromaster figures can stand. Finally, a special connector packaged with Star Convoy allows the Microcarrier to be connected up to Grandus's base mode, powering his moving elevator.
The first Cybertron Optimus Prime toy transforms into a heavily-armed fire truck of made up origin, topped with two large cannons. The left fires a spring-loaded translucent blue missile, while the right features electronic sound effects and a flashing red LED. The cannons and the sides of the truck fold down to create an unlikely flight mode for the vehicle.

Prime's trailer opens up into his Combat Deck, containing the scout drone, Roller. The interior of the Combat Deck features three pegs that can accommodate Prime's laser rifle, fuel pump and nozzle accessories, and seating for two Diaclone drivers. As its central feature, the Combat Deck features a missile-armed repair drone pod mounted upon a boom lift arm (featuring another cockpit for a Diaclone driver), which can also be extended through holes in the trailer's roof and front-end when it is closed. Situated in the base of the boom arm is a spring-loaded launcher that can launch Roller out of the Combat Deck and into action. Roller himself has seating for four Diaclone passengers, and features a port that can accommodate either Prime's rifle or the fuel pump. The interior space of the trailer allows storage room for one standard Autobot car, which can also be shot forward by the launcher.
×