Several Autobots and Decepticons, including Optimus Prime, were reformatted into will-less war machines under the control of Cobra. During an initial attack on a human peace conference, Cobra's remote control of Optimus (whom they had nicknamed "HISS-14") mysteriously failed. G.I. Joe vs. the Transformers #1 Later at Cobra's island headquarters in the Caribbean, Cobra scientists pulled Optimus apart to find out what was impeding their commands. As this analysis took place, Optimus reverse hacked into Cobra computers until they shut him down in a panic. G.I. Joe vs. the Transformers #2 Despite this, Prime sent a viral message out to hundreds of email addresses that included the coordinates of Cobra's base. The message was intercepted by G.I. Joe who teamed up with Wheeljack and Bumblebee. After Wheeljack broke the remote control over the Transformers, Prime went after Cobra Commander. G.I. Joe vs. the Transformers #3 More than a bit frightened of a giant robot gunning for him, the human released Megatron, who was trapped in gun mode. Megatron transformed and fought Prime to a standstill until other Autobots came to back him up. G.I. Joe vs. the Transformers #4
Somewhere along the line, G.I. Joe picked up the familiar storyline that we all best associate with the toys: G.I. Joe Team vs. the Evil Cobra Organization. A classic tale of good vs. evil. Well guess what. Somewhere else along the line the franchise picked up a very different storyline and a new look to boot, highlighted by the newest figurine: The DARK NINJA MASTER.
Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He is love, in bed.
An additional oddity is that unlike every other toy in the Go! toyline, Optimus Exprime came packaged in a box without a window. This is potentially because of the sheer amount of information TakaraTomy wanted to print on the box, or because they were unable to fit him into the box in robot mode with all of his accessories displayed. Whatever the reason, it left him with a smaller box than the other voyagers in the line, a substantially-altered box layout, and a much shorter profile.
In one possible scenario, Optimus was surprised to see Beachcomber return to Autobot headquarters soon after his departure. Beachcomber informed Optimus that he had uncovered the Decepticon's newest hidden fortress, and he suspected that the Decepticons were up to something big. Optimus sent out Beachcomber once more, this time along with Powerglide and Windcharger to investigate the Decepticons' plot further.
Power of the Primes "Evolution Optimus Prime" transforms from a truck with a trailer into a robot and back. The individual truck transforms into his "Orion Pax" form based on his appearance in the Generation 1 episode "War Dawn", and he is able to form the core of Optimus Prime's robot mode. His trailer forms Prime's entire body, and his ion blaster can be split into two weapons. He includes the Matrix of Leadership, which can store in his chest in the 'Evolved' form. The center of his Matrix of Leadership can be replaced with any Prime Master. In an undocumented feature, his rifle can be stored on his back as Optimus Prime by pegging it into Orion Pax's hands.The Takara version of the mold lacks the production numbers located at his right shins. Depending on the individual copy, Optimus Prime is prone to having a number of quality control issues: ranging from two left/right arms and/or legs/feet on the evolution armor, to lacking stickers on the trailer pieces.
As the two Titans battled, Optimus found Megatron watching the fight and demanded he assist them, but Megatron refused. When Trypticon swallowed the Enigma of Combination and took control of the Combiners, Optimus attempted to attack them as a distraction, but he was caught and the Combiners attempted to pull him apart. Optimus managed to break free of his captors and was further saved by the timely arrival of Megatron. Against Optimus's wishes, Perceptor returned and tricked Trypticon into swallowing the Matrix. Consumed However, this ultimately proved successful, and Trypticon released all that he had swallowed during the conflict before falling inert once again. The relief was short-lived, though, as Megatronus suddenly appeared before them, proving Optimus's fears. Optimus and Maximus attempted to surprise attack Megatronus, but he brushed off their blows and fired a beam through Optimus's chest, killing the Autobot once more. All Things Must Pass
The TakaraTomy "Autobot Alliance" release of this toy has some significant differences, including casting the red plastic in a darker shade, making his shin and wheel joints grey rather than Hasbro's bronze, painting the Matrix of Leadership silver, and swapping out the dual energon swords for battle hooks, similar to 2010's Leader class Optimus Prime. However, due to the Japanese release retaining the Hasbro packaging, the box still advertises the dual energon swords rather than the hooks. He retains the masked face used for the Hasbro release.
Doug Smidebush, Lior Keinan , Kelvin Nduka, Thad Standley, Nolan Zak, Adam Franks, Stephen Brown, Loren Roberts, Matt and Nykki Boersma, Tom Morgan, Jack Everitt, John Kovalic, Seiler Hagan, Jess Hart, Will James, Christopher M. Kelly, Roberto L. Vargas, Michele Hall, Chuck Lawton, Ismael Schonhorst, (There are those who call him) Tim, Vladimir Weinstein, Randiman Rogers, Robert Booth, Henry Roenke, Kevin Culp, W. David MacKenzie, Nicholas Richards, John Idlor, Michael Fox, Rob H., Matthew Cody, Dan Callahan, Patrick Kohn, Seth Phillips, Kevin Korpi, Ben MS, Monica, Mark Gonyea, Pharlain Ross, Derick Larson, Furstarter.com
Instead of his trailer, Prime can alternately combine with Armada Jetfire, who forms a pair of legs, as "Jet Prime" (Jet Optimus on the cartoon, or "Jet Convoy" if you own the Japanese version). In addition to this, Armada Overload can form a pair of massive cannons that attach to either Prime's base mode, or mount over the shoulders of his super robot torso (with either his trailer or Jetfire as legs), forming Optimus Prime Megaweapon (or Magna Convoy).
Bumblebee had many adventures in his bizarre humanoid form. He wound up in the heart of Cybertron to find the resting place of the creator/god of all Transformers, Primus, and learn of their origin as a race. Later, he went on a quest to find the all-powerful Creation Matrix, also known as the Autobot Matrix of Leadership, but stumbled upon the Cybertronian Decepticon commander, Thunderwing, who blasted away Bumblebee’s Pretender shell.
One of the taglines of the Transformers universe is “more than meets the eye.” It’s meant to suggest, of course, that these robots are not just robots; they can turn into vehicles and boomboxes and dinosaurs. But some of the characters themselves tend to be more than meets the eye. In fact, they can become other Transformers. Megatron becomes Galvatron, Orion Pax becomes Optimus Prime, and Bumblebee becomes Goldbug.
As the Binaltech saga unfolds, the multiverse is threatened with destruction, until the original continuity is restored and the Binaltech universe is split into and preserved within its own separate universe. Overdrive confirms that the threat is over by visiting the dimension occupied by the original timeline, and reveals that in that world, Hot Rod had received the Matrix and taken over leadership of the Autobots as Rodimus Prime.
Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.
On the rocky plains where practically every Transformer battle ever seems to happen, Prime arrived in his Powermaster body to back up three of his troops against Dreadwind and Darkwing. He combined with Hi-Q and transformed, attacking with his trailer's battle station mode. Optimus then combined with the trailer to become a "Super Powermaster" and continue the attack. Who won? Find out in Marvel Comics! Powermasters commercial
The Reveal the Shield Legends Prime mold was redecoed again for the inclusion in the second EZ Collection wave. This version of the figure replaces his blue on the head with black, and the blue paint on the legs is stripped off, revealing the black plastic underneath. and like the Megatron redeco in the same wave, features a Generation 2 Autobot symbol instead of a Generation 1 insignia.
Part of the first wave of Age of Extinction: Generations Leader Class toys, this is yet another completely new "big" Optimus Prime figure. While smaller than the First Edition toy, this one features more silver and chrome paint in vehicle mode, a more poseable robot mode, and a Vector Shield accessory instead of the Sentinel Shield. Unlike the First Edition figure, Leader Class Optimus Prime's pauldrons and hip-skirts are formed from truck kibble, giving him a marginally smaller backpack. His accessories have roughly the same functionality as the First Edition toy, with his sword being hand-held and pegged onto his hands or storing underneath the truck, and his shield mounting onto his left forearm or storing on the back of the truck. Additionally, the sword sheath underneath the truck can be folded up and used in robot mode.
While Beast Machines was still running in Canada, Japan's Takara made a bid to return to the familiar vehicle-transforming robots concept. In 2000, Car Robots was released. This line was brought by Hasbro to America as the Robots In Disguise series, and featured the Autobots facing off against the Predacons. This series is usually regarded by most as filler while Hasbro contemplated the next direction for Transformers. However most fans of Transformers recognise that most if not all of the toys released from this line were of excellent quality (with the Optimus Prime and Ultra Magnus figures gaining considerable praise), combining the ball-joint articulation with detailed, well painted alternate modes.
In the United States, Prime was only available in a special two-pack with a similarly unique Classics Megatron toy, and the specially-produced "The Ultimate Battle" DVD (which is, inappropriately enough, entirely about the Unicron Trilogy). The two-pack (including the DVD) was also available as a Walmart exclusive "Bonus Value" version with two randomly selected members of the Cybertron Giant Planet Mini-Con Team, in the combinations Overcast/Longarm, Overcast/Deepdive and Deepdive/Longarm. International markets, including European countries, saw the two-pack in a considerably smaller, differently-shaped box that was lacking the DVD case (the DVD was instead made available separately). In addition, Mexico, Singapore and some European countries such as the Netherlands and Hungary also received the two figures on individual cardbacks. For the United States market, the two-pack was rebranded and re-released in 2003 Universe-branded packaging later in 2007, available from Dollar General, Big Lots and KB Toys, and again in 2010 Transformers-branded packaging in 2011, this time available from Dollar General and Big Bad Toy Store.
This Optimus Prime is a redeco of the figure above, featuring red wheels and various Tech Spec-sque patterns on the legs & chest which can be decoded with their transparent red weapons, which is molded in a sprue similar to the ones used for the Arms Microns kits & Robots in Disguise (2015) Mini-Con figures. He can use any weapons included in this set, although his primary weapon is an axe.
Studio Series Optimus Prime is an all new Voyager Class mold that transforms from robot into a Peterbilt 379 semi-truck. He comes with a pair of Energon Swords, which can be mounted onto his arms or store on the back of his robot mode or truck mode. The figure combines engineering concepts from his Age of Extinction Voyager Class figure with techniques previously used on Prime: First Edition Optimus Prime. He also features a more subdued color scheme compared to other Optimus Prime figures. Like the rest of the Studio Series figures, the figure prioritizes robot mode scale and thus stands shorter than his Voyager Class wavemate Starscream. The CG renders depict him possessing long smokestacks, but the final product has them shortened... again. He also comes with a cardboard backdrop display depicting the climatic forest battle from Revenge of the Fallen.
Optimus Prime grew concerned when Hound picked up a communication from Laserbeak that indicated the Decepticons had grown interested in a mysterious structure near a human village. Prime and a team of Autobots headed out to investigate, and they battled the Decepticons over the structure, which turned out to be a harmless windmill. Laserbeak's Fury
Exclusive to Japanese ToysЯUs stores, this redeco of AM-01 Optimus features warmer, metallic shades of plastic, replaces the gray plastic around his windshield-chest with red, and replaces the clear-blue plastics with clear-black. He comes with the Hasbro version's battle sword, which is now a darker, warmer shade. For Arms Microns, he now comes with O.P. A, Pral G, Sais G, and Jayz G, and the latter three can combine to form a golden version of the Cosmotector shield (hence the name).
This figure was only available in a two-pack with a Voyager Class Grimlock figure. The two-pack was exclusively available at Target stores in the United States, Canada and Australia, at Tesco stores in the United Kingdom and Hungary and at Galeria Kaufhof department stores in Germany. In Asia, most of the remaining stock are available in some hobby shops and some video stores like Speedy Video.
This figure suffers from a design flaw, in that his knee joint pegs are slightly too big for their sockets, and that the resulting connection is so tight that it makes the sockets form stress marks and eventually crack, or even cracking during assembly. The problem can be remedied by simply sanding down the pegs prior to sliding the legs onto the peg.
The first Unicron Trilogy Optimus Prime toy transforms into a longnose truck cab of made-up model. His clear-plastic smokestacks can detach and form a double-barrelled pistol that he can hold in robot mode, and a button on top of his head causes his mouthplate to jiggle up and down as if he were talking (the irony being that while this was a familiar trait of G1 cartoon Optimus Prime, in the Armada animated series, this Prime's mouthplate remained static when he talked). He can also hold a large cannon that is stored within his trailer, and his chest flips down to reveal a (non-removable) Matrix of Leadership. He is packaged with his Mini-Con partner Sparkplug.
Featuring a complex transformation, the front and back ends of the truck essentially fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The halves of the rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his price point, he has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, as it is held in place by a simple clip.) Optimus's final Automorph, located in his torso, is activated by flipping the silver lever on his stomach, activating a series of spring-loaded actions where the truck windows are pushed apart and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point, yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
For reasons unknown, his ion blaster was sculpted with a large, rectangular handle, requiring accommodating fists. In order to make use of the other weapons in the line (like his own rocket launcher and the solitarium weapons), he comes with an extra pair of replacement fists with smaller, circular peg-holes. This replacement-fist method is also used to plug in his clear-plastic energy axe.
A Voyager class figure that transforms from semi-trailer truck to robot. Head features retractable face plate. The figure's main gimmick is a spring-loaded mechanism that spins the lower torso during transformation to robot mode. Trailer detaches and transforms into a giant Ion Axe or jet pack. Prime's gun can be filled with a small amount of water. Some variants of the figure come with the Autobot symbol printed on his left shoulder while others do not.
Hot Rod then fought in the battle of Autobot City and saved the city for if he had not attacked Megatron, he would have destroyed it. Due to his attempted intervention in the epic battle between the Autobot leader, Optimus Prime and the Decepticon leader, Megatron, Prime was lethally injured. Before he died, the Matrix got passed on to the Autobot Ultra Magnus, whom he referred to as "old friend", despite protestations.
Optimus later led a convoy in search for a building site for Autobot City, which ran into a Decepticon ambush. Rodimus Prime remembers the Transformers greatest battle on Earth. He sent off several Autobots to get help, knowing this was the only chance of victory. Transformers Combat Data Those several Autobots were seen again, but Prime... wasn't.
This figure suffers from a design flaw, in that his knee joint pegs are slightly too big for their sockets, and that the resulting connection is so tight that it makes the sockets form stress marks and eventually crack, or even cracking during assembly. The problem can be remedied by simply sanding down the pegs prior to sliding the legs onto the peg.
Optimus Prime (Clear Ver.) is a redeco of Revenge of the Fallen Legends Class Optimus Prime in black and clear blue plastic, available only in the August 2014 issue of TV-Kun magazine. His only paint operations are on his abdomen and face, but stickers for additional detail are included on the issue's sticker sheet. Optimus Prime has been slightly retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock.
Released as part of TakaraTomy's Welcome to Transformers 2010 campaign, the "Sons of Cybertron" set includes a redeco of the 2006 Classics "Ultimate Battle" pack Deluxe class Optimus Prime, cast mostly in translucent plastic (his shoulders remain opaque Polyoxymethylene (POM)). He comes packaged with a similarly translucent redeco of Classics Rodimus.
The TakaraTomy version, part of the seventh wave of Japanese Prime toys, is dubbed Arms Master Optimus, uses darker, metallic plastics, casts the backs of his thighs in metallic red, replaces his metallic silver paint with glossy gray, and replaces a few of his paint operations with customer-applied foil stickers, such as his insignias, shins, headlamps, the tiny yellow lights on his torso, and the blue deco on his truck panel sides. He has also been retooled with additional 5mm pegs for his thighs, roof, and lower backpack, as well as ports for his forearms, shoulders, smokestacks, fuel tanks, and roof. Instead of the rifle, he comes with a very large Matrix which can tab onto his chest as armor or mount onto the back of the truck cab, with the Matrix also being covered in 5mm posts and holes so that Arms Microns can be attached to it. He additionally comes with a clear-blue "Shining" version of the Arms Micron, R.A., who can combine with the Matrix to form the colossal Matrix Saber.
Certainly the most iconic, and most common, leader of the Autobots is Optimus Prime. But the thing about Optimus Prime is that he dies... a lot. And every time he dies, someone has to take his place-- until he’s invariably resurrected in one way or another, that is. In many storylines, including the original animated Transformers: The Movie, it’s Hot Rod who takes over as Rodimus Prime.
Per Ravage's original plan, with Unicron defeated, the Decepticons returned to conquer the transformers. Optimus Prime had also planned for this event, and sent Mirage to press a switch, buried deep within Cybertron, that would render all transformers inert. This was seen at the conclusion of the "Five Faces of Darkness" story arc from the original animated series. Optimus hoped that by rendering all the transformers inoperative, the war would be stopped, hoping that the humans would be able to reactivate the transformers in the future. Instead of deactivating all transformers, however, only those with original Cybertronian bodies were deactivated. Transformers with Earth-made Binaltech bodies continued to function. The Autobots effectively won the war, the large army of Binaltech Autobots easily outnumbering the few Decepticons who had managed to procure Binaltech upgrades. The few Decepticons remaining, effectively just Nemesis Prime and Shockwave, escaped with Megatron and their other inert comrades.
A redeco of Deluxe Earth Mode Optimus Prime with the jet pack attachments and a smaller version of Ultra Magnus' Mass Hammer, as seen in the "Endgame" series finale. The Wingblade attachments are also compatible with Voyager Optimus Prime. The figure never saw a release in the U.S. market due to Hasbro's decision to cancel the toy line, but a variation of it was made available in Japan.
Another Hasbro release of the MP-10 mold, which is basically a reissue of the 2010 Transformers line's Masterpiece Optimus Prime, but with the Japanese release's ID Number. Surprisingly he is NOT mistransformed on the initial official photography... until secondary stock photos had the vehicle mode slightly mistransformed. Unlike the original, Hasbro version, this version features silver paint on the interior of the trailer. This version also removes the red paint on the die cast hinge piece in his body and replaces it with blue paint. Sadly, this figure doesn't come with the Key to Vector Sigma. Due to compact packaging, the trailer is prone to scuffing.
This playset is a variation of Optimus Prime's dinosaur mode, but as a figure-8 racetrack. A launcher can propel Flip Racers through the track where they can activate a popup Chase and land in a jail. The Flip Racer MorBot is included but any Flip Racer is compatible. The raceway can be extended by attaching the Flip Racers launchers: Bumblebee’s Quick Launch Garage or Airport Blastoff Blades (sold separately).
Many Transformers come with tech specs (short for technical specifications) printed on the back of the box that they are sold in. The owner of the new Transformer is encouraged to cut out the tech specs and save it. This card has information on the Transformer, and will usually include the character's name, picture, indication of allegiance (Autobot, Decepticon or other), function, a quote, a description of the character, and numerical values of the character's various attributes. Although only the numbers can be truly deemed "technical specifications", the entire card is usually referred to as the Transformer's tech specs. Each specification is rated by a value from 1 to 10, 1 being the lowest, and 10 being the highest.
When animating the scene in which Primal removes Prime's spark, Mainframe's animators consulted The Transformers: The Movie for reference on the interior of Prime's chest. Not realizing the importance of the Matrix of Leadership, they rendered it as a container for Prime's spark. Beast Wars writers Larry DiTillio and Bob Forward have since claimed that in their view, Prime had not received the Matrix from Alpha Trion at this point, but a later comic produced for Botcon indicated that the Matrix was in fact stored in a secondary compartment, hidden behind Prime's spark. In this particular comic, the alien Vok used the Matrix, the Transmetal Driver, and a control suit once piloted by the Predacon Quickstrike to create Primal Prime.
He made it out of the building and ran into the real Sunstreaker, who blasted the 2 clones following Hot Rod. Sunstreaker ignored Hot Rod's warning about Scorponok's army and stormed into the building so Hot Rod painfully wired himself to send a distress signal. When Sunstreaker's real head was later disabled by Hunter, the Headmaster clones shut down, which Hot Rod explained to Grimlock. The group was surprised by the arrival of Shockwave, but Ultra Magnus had heard Hot Rod's distress call and was on his way to Earth. After Scorponok knocked out Sludge and Grimlock tended to him, the remaining Dynobots offered Hot Rod a lift aboard the Monsterbots' ship. He refused though, and made it back into Machination HQ to take care of something "personal". He eventually found Scorponok's real head. Hunter also showed up and let Hot Rod know how to disable it, but before he could do so, Scorponok grabbed him. Before Scorponok could crush Hot Rod's head, the Dynobots showed up and began to battle Scorponok. Hot Rod told Swoop which wires to sever, and he did just that, reducing Scorponok to a catatonic state. Ultra Magnus arrived took everyone back aboard his ship, which later docked with the Ark-32. Within 3 days, Hot Rod was fully repaired, with a new body form design.
The figure has diecast in its feet, shins, and abdomen. It features pinstriped flames, articulated fingers, a headsculpt with a face that can rotate between masked and unmasked modes in a method identical to Armor Knight Optimus Prime's, and an abdomen that opens to reveal a chamber housing a diecast Matrix of Leadership. He comes with said Matrix, his Ion Cannon, and a pair of Energy Swords that tab in behind his wrists (the hands unfortunately have to be bent forward to accommodate these). All three weapons can combine and store on the fifth wheel in vehicle mode.
Another game was released for the Sony PlayStation 2 by Atari; simply titled as Transformers, it was based on The Transformers: Armada. The game's reception was mixed, particularly due to the popularity of a PS2 Transformers game released at the same time for a Japanese-exclusive market, though the Armada game was of a higher quality and featured much better gameplay. The game not released in America was based on the Generation 1 storylines.
The 5-inch Power series is a little more complex (4-9 steps) and a little more spoilery, because it’s the first hint we’ve gotten that Megatron might be a part of the Transformers: Bumblebee movie. Sporting a similar form to previous versions, his alt mode is a 4-track Cybertronian tank (with the usual very conspicuous face…funny how a lazy toy design decision from the first movie has now become cannon). The Power series also has the only Dropkick Energon Igniters toy. You can use the cores sold with the Power Plus and Nitro toys to unlock special features. Camaro ‘Bee and Hot Rod round out this series.
Hero Optimus Prime was the first new-mold Optimus Prime toy in the Generation 2 line. He transforms into a Kenworth truck of unknown model with a flatbed trailer. The truck and trailer form his robot mode, but cannot disconnect. His primary gimmick is an air-powered missile launcher that uses an air bellows attached by hose to launch his large, hollow, soft-rubber-tipped missiles. The bellows and missiles attach to his back in robot mode. His rifle plugs into the launcher's main body in truck mode.
Reissued in 2003 as part of Takara's Transformers Collection line of reissues. This version (#13 in the Collection series) was retooled from the 2000/2002 Rodimus Major tooling in order to make the fists and engine block hole wide enough to equip Firebolt. In addition, the original 2 guns had their posts modified so that a Targetmaster Hot Rod could still use them, if the owner chose to.
As he and Prowl discussed the wisdom of evacuating, a huge explosion obliterated the Forum of Enlightenment. Optimus led a team there, realising that the destruction was a message from Megatron. Leaving his team, he ventured underground, encountering Shrapnel, who blasted him into a pit. The War Within #2 Exploring the underground, Prime had a strange vision of a transparent version of himself, which warned that he had to grasp Cybertron's significance. Then he was attacked by Soundwave and the Insecticons, whom he was able to easily best by using the labyrinthine environment to his advantage. He then felt himself led to a confrontation against Megatron, and both faction leaders met atop of a bridge, overlooking a deep abyss. Starscream blasted the bridge Optimus and Megatron were standing on, plunging them into the chasm. The War Within #3 Recovering, Prime heard another disembodied voice telling him about Cybertron. Before he could look for a way out, Megatron found him, and informed him about the true nature of the Matrix, telling Optimus how it could be used to power Cybertron's planetary engines, transforming it into a space-faring war-world. This spurred Optimus to fight back, but before long, Megatron took control of the battle, smashing his fist into Prime's chest to get at the Matrix. A blaze of light enveloped the pair, who found themselves abruptly on 20th century Earth. The War Within #4
Honestly, all the charts were done in Excel. I tried other methods but that was the easiest since all my data was in excel already. They are X,Y Scatter plots with sooth lines – heavily tweaked. Made the lines thicker which makes it look smoother and changed the layout a bit to make it clearer. The Excel defaults are ugly but if you spend enough time tweaking them you can get something passable.
Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such. Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.
This Japanese series, told through radio plays using the Transformers: Alternators Optimus Prime toy mold, branches off from the original animated series. It is set in a different universe than both the original G1 and Binaltech continuities. Set in the year 2006, one year after Prime's death in The Transformers: The Movie and four years before the third season, it sees Prime's corpse covertly transported to Japan by the Earth Defense Command, a government organization. The convoy transporting his body was attacked by a group of female commandos, led by Marissa Faireborn, who had known Prime years ago as a child. Believing they had secured Prime's body, the commandos were taken by surprise by EDC "Kiss Player" operative Ringo and her Autrooper mechanoid partner, who killed them all except Marissa. Marissa went to Prime's body just as an Autrooper began to fuse with it and, reflecting on her childhood memories of Prime, she gave his faceplate a final kiss. This initiated a transformation where Marissa and Prime were fused together and Prime was reborn with a new body, capable of transforming into a Dodge Ram SRT-10.
Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster stored in the form of the fuel tanks on his back, and a shell cannon stored on his back, two retractable energon blades that extend from both forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, two retractable energon hooks on both of his forearms, and bladed knuckles. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.
For the Generation 2 toy line, the original Optimus Prime toy was altered somewhat and an electronic sound maker was added. Later Generation 2 toys of Optimus were completely new designs, such as Combat Hero Optimus Prime, Laser Optimus Prime, and Gobot Optimus Prime, who could become a red Lamborghini car. In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film. In 2006, Hasbro introduced Alternators Optimus Prime, which turned into a licensed 1:24 scale model Dodge Ram SRT-10. In 2011, Takara Tomy released MP-10 Convoy, a smaller, more show-accurate version of the Masterpiece Optimus Prime figure.
Prime's cab and trailer can also combine to form a super robot mode. Transforming the cab into the torso portion sends the transformation command to the trailer, which raises itself up off the ground to become a pair of immobile, statuesque legs (as long as you're not playing with it on carpet), and when the pair are connected, the super-robot head pops up with a metallic shriek sound effect. Pressing the Autobot symbol on the figure's chest activates a pulsing laser sound effect, and the small grey button on his right shoulder illuminates his fist with a red LED, which can illuminate either of his guns, as well as the Star Saber sword (the Star Saber was specifically cast in clear plastic for this purpose, but in practice, the light failed to carry even halfway up the blade).
While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth, picking up one year after the events that saw Optimus Prime's return to life.
Main event time! Nitro figures are more like your traditional Generations/Power of the Primes deluxe bots. Standing at 7-inches, they feature increased detail, additional paint applications and all come with a core to unlock additional features. In addition to Barricade, Optimus Prime, and VW Bumblebee (this one’s my favorite of the entire line), the Nitro series will also have a Camaro ‘Bee.
On Cybertron, Optimus Prime kicked back to do a little bit of paperwork and reminisce. With Shockwave defeated, Cybertron was enjoying a new era of peace. He was interrupted by Hot Rod, who reported that a group of "pesky humans with their peashooters" were giving an Autobot team on Earth a hard time. Prime suspected Cobra's involvement and counseled Hot Rod not to be so dismissive of the humans. The Art of War #1 When the team returned to Cybertron and mysteriously vanished in the Gladiator Zone, Prime was prepared to go search for them, but was convinced by Hot Rod to stay behind and organize a peace ceremony. The Art of War #2
Transformers: Tribute Optimus Prime is a redeco of the 2007 Leader Class toy, to commemorate the 10th anniversary of the live-action film series. While the deco's paint mask is the same as the said figure, he features a more saturated blue and red, and chromed feet/front grills which was used for the MA-21 redeco, and he also features chrome on both sides of the stomach. While the Hasbro stock photo shows that his feet are slightly mistransformed in robot mode, the Takara stock photos shows his feet correctly flipped out.
The TakaraTomy release of Optimus Prime has considerable differences from the Hasbro release. His blue and red plastics are darker and metallic, his translucent blue plastic is darker, and a few of his paint operations have been omitted and replaced with customer-applied foil stickers, such as his shins, feet, headlamps, and insignias. His legs, outer forearms and truck mode "sleeper cabin" side panels have been retooled to include 5mm post-holes as part of the line-wide "Arms Micron" gimmick. As such, he does not come with the Hasbro version's weapons, but instead an Arms Micron partner named O.P. who transforms into a weapon resembling Optimus's in-show blaster cannon. This version of the mold was also used to make Prime Nemesis Prime.
It took two further years, but this figure was eventually released as part of the Japanese counterpart to the Alternators line (Binaltech) in 2008. Binaltech Convoy features some additional paint details, like his silver pelvis, additional patterns on his shoulders, and red paint on his engine-gun, and like all Binaltech figures, he also includes die-cast metal pieces. Unlike previous Binaltech releases, a bio-card was not included.
A BotCon 2012 exclusive purple redeco of the Deluxe "Generation 2" Optimus Prime figure from the Generations toy line, with the sword's blade molded in clear yellow. Much like the 2008 Voyager figure, this figure has painted-in "battle damage" effects. The right side of the hood has the words, "I shall stand...", while the left side says, "The rest shall fall."
Four million years ago, Optimus Prime ended a Decepticon attack on the Ark by directing it towards prehistoric Earth. When both factions reawakened in 1984, Optimus Prime and the Autobots fought the Decepticons on numerous occasions until 2005. During an attack on Autobot City on Earth, Prime fell in battle against Megatron and passed the Matrix of Leadership to Ultra Magnus.
Hot Rod is featured again in Maximum Dinobots. Returning to Earth to continue his search, Hot Rod arrived at the gates of the Machination's complex, and Scorponok prepared himself to deal with the intruder. Unfortunately, Hot Rod found himself fighting well out of his weight class as he was man handled by Scorponok, who cheerfully bashed his face in, put out one of his optics and snapped his leg. The Headmasters dragged him into Scorponok's control room where, with absolutely no prompting, the big man explained his entire plan for the Dynobots, Skywatch and the Machination. Hot Rod seemed less than impressed with this rather mundane approach, which ticked Scorponok off enough for him to point out that it was obviously just the first stage in his master plan. He was also warned to remain awed or he'd be of no further interest. When the Dynobots and newly arrived Monsterbots seemed to turn Scorponok's plan on its head, Hot Rod burst out laughing, at which point, Scorponok ordered him taken out and shot. In the lift to the surface, Hot Rod suddenly erupted in flames, killing his captors, but draining his power supply. Weakened and with a crippled leg, he collapsed on the floor.
Based on his appearance in War for Cybertron, Generations Optimus Prime transforms from a red, blue, and silver robot into an "armored truck mode." He comes with a hand-held rifle that is held via either of its two 5mm posts, and can fold up to store in either mode. He features additional 5mm ports on his forearms, roof, and front-wheel panels. Optimus has a stylized sculpted Autobot insignia on his back, as seen in the game, but it is obscured by kibble.
Part of the sixth wave of the 2010 Transformers toyline, this Optimus Prime is an all-new Deluxe class mold based on the original Generation 2 Laser Optimus Prime toy (see above). Transforming into a racing truck, he has some influences from the live-action movie Optimus Prime, including the more defined flames on his hood, athletic robot mode proportions and a more aggressive-looking translucent orange sword that can be held with both hands for maximum extreme chopitude. Optimus Prime features extensive use of translucent plastic in his arms, head and upper torso for a light-piping effect. Optimus also has a (non-detachable) matrix gimmick in robot mode that is formed by a relief pattern on the inside of the cab's side windows and is visible through the windshield/chest in robot mode. Like the Legends toy, he's part of "Reveal the Shield" and features a rubsign, this time on the roof. He is also very articulated and poseable, even featuring ankles and wrists that are both ball-jointed and hinged.
But in between those two most well-known alternate modes, Bumblebee has had at least six others. For the Transformers: Alternity Japanese toy line, he was a yellow Suzuki Swift Sport, which at least is still a small, quirky car. Ditto the AMC Pacer, the form he took when he travelled back in time to the ‘70s in a G.I. Joe vs. The Transformers crossover comic. Somewhat similarly, he’s a Supermini police car in the Transformers Animated series. But then he’s also been a couple of other muscle cars: as the Timelines Deluxe Goldbug toy, he’s a Chrysler ME 412 concept car, and in the Transformers: Prime animated series he can take the form of the fictional Urbana 500 muscle car. Bumblebee also has a number of different Cybertronian vehicle modes.
Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.