Hero Optimus Prime was the first new-mold Optimus Prime toy created for the Generation 2 line. He transforms into a Kenworth truck of unknown model which defies Optimus convention by being one continuous unit, rather than the traditional cab-and-trailer combo. Decals form the windows of a faux truck face to represent his chest, featuring both his name and what appears to be a life support readout coming alive towards the end. In addition to a small gun, he is armed with a large missile launcher, which can fire a rubber-tipped rocket by means of a bellows which you slam your fist down on to produce a puff of air. The launcher is accessible in both modes, ending up mounted on his right forearm in robot mode; the bellows is attached via a rubber hose and cannot be disconnected, but stores on the figures's back when not in use, as do the rockets. A similar air-launching system with identical missiles was used by the simultaneously-released Hero Megatron, and by Laser Optimus Prime the following year (see below).
Part of the first wave of Bot Shots Series 1 launchers, this repaint of Optimus Prime comes with a large trailer that pops open to form a battle station with a spring-loaded launching platform. He appears to have the same plastic colors as the single release, and the same set of paint operations, but his paint is done in different shades, having glossy dark blue paint and glossy bright red paint. The black part of his launcher is sculpted to look vaguely like the repair done that is part of Generation 1 Optimus Prime's repair bay.
Prime filled one of the chase figure slots for the tenth wave as well. This rare figure was the same as the regular Super Mode PVC, except instead of wielding his Convoy Gun, Prime was armed with the Star Saber sword. As with the previous chase figure, it could only be found in one out of every ten cases, and took the place of the full-colour Prime figure in that assortment.
Naturally, Optimus Prime got the biggest of the sets in the first year of Kre-O. The set can be built into a large long-nose tractor-trailer rig with a removable "sleeper" cab that hides a computer station, and a trailer that can carry the set's two motorcycles or open up to carry larger car builds. The robot mode build includes a huge Optimus, based largely on the live-action movie Optimus, though with a head based almost directly on the Classics Voyager Optimus. He is armed with a distressingly plain brick that fires pressure-launched missiles (aka his smokestacks). Most of the leftover parts in robot mode become a "headquarters" which is mostly just a random assemblage of mismatched-color panels and a pair of barricades. Both main builds leave numerous parts unused if you go expressly by the instructions, but hey, it's a building kit, surely you can find someplace to apply most of them.
In "Decepticon Air", Optimus receives a secret distress call from the Elite Guard ship that is carrying Decepticon prisoners. During the flight, the ship enters an electrical storm, which revives an inactive Swindle and he frees other prisoners to take over the ship. Transwarping to the ship via Swindle's personal transport field, Optimus joins forces with the Elite Guard, rounding up most of the Decepticons in the end.
If they took the left passageway, the group happened upon Megatron’s lab. Though Megatron attempted to trick Optimus into activating the Fortress’s self-destruct sequence, Optimus was too clever to be duped. After deactivating both the Destruction beam and the Decepticons themselves, the Autobots found Jessie tied up in a cell. The Autobots then celebrated their victory by guzzling a few quarts of fine-grade oil.
The first commercialized yo-yos in America were sold in vast majority by entrepreneur Donald Duncan and children couldn't get enough of them. The design was elementary: two wooden or plastic discs, connected by an axle with a string tied to it. To keep the user from flinging the yo-yo comically through the nearest window pane, the string featured a tiny finger loop at the opposite end. A loop that, as we all remember, tightens relentlessly with each toss until the finger tip is a healthy shade of purple.
Beast Wars: Transformers had to be renamed in some countries, particularly Canada, because of concern over the word "war" in the title. So, in some countries, it was released under the title Beasties. Long-time Transformers fans noticed the prominence of the words "Beast Wars" over "Transformers", the latter appearing in small type under the former. The Transformers' fan base splintered into two groups as a direct result, with the one enjoying Beast Wars for what it was and the other refusing to accept it as official canon in the Transformers mythology.
The first reissue of the original Optimus Prime toy in North America since the Generation 1 toyline reached its end, this "Commemorative Series" edition of the figure was a Toys R Us exclusive. It was mostly identical to the original figure, save for some necessary modifications made for safety reasons: In the first instance of what would become a recognizable alteration to the mold, the toy's smokestacks were shortened, while the Combat Deck's firing missiles were elongated to prevent potential choking, as was the case with all other Commemorative Series figures' firing missiles. This release also had the trailer's launching feature removed.
For all the positive aspects, these changes are not without their drawbacks. The LEGO community has been crying foul over the perceived decline in quality of the bricks5. While nowhere as bad as their competitor, any decline in quality reflects poorly on a company known for quality control. The LEGO group has been expanding its manufacturing base to places outside of Denmark, into Mexico, the Czech Republic, and China (although so far it seems only their “signature brand” non-set items are made in China). LEGO claims that this has not changed their dedication to the quality of standards by which they abide. However, it seems that the molds have changed to reduce plastic6. Whether or not this affects the durability of the bricks is yet to be seen.
This. Is. Awesome. I remember running LEGO piece auctions ~1998/99 on RTL (rec.toys.lego) then later my own website. I’d buy sets at Walmart and other places on discount, break them out, and sell the pieces as lots. I knew I’d always make good money if I could average < $0.10/piece cost (ideally around $0.07) and sell for $0.15 – $0.20+ … fun times!
All of the Tiny Titans were sold blindpacked. However: there's a tiny clear window in the back to peek at the item inside, making the task of getting the ones you want easier. Every collectible card included in Tiny Titans has a scannable insignia sticker on it. Scanning the badge unlocks a random amount of Energon "currency" and a randomized bonus power-up item, and can only be scanned once per day. It's honestly quicker and less redundant to say which toys don't have this feature.
After having spent an extended period of time lost on Quintessa, Optimus was returned to Cybertron by the Turbomasters during their efforts to retrieve the similarly lost Flash, who he had been drawn into Perceptor's Dimensional Interface Assembly. The Age of Wrath Pt.5 Though badly damaged, Optimus led an insurrection against the then Megatron-controlled Cybertron, and successfully overthrew his enemy from power, all the while thwarting a Quintesson invasion. The Age of Wrath Pt.6
Most notably in terms of new tooling, the panels on the undersides of Powermaster Optimus Prime's forearms feature slots under the fists, which allow the guns to tab in and be held much more stably than with Ultra Magnus. And due to the amount of empty space in the cab area in vehicle mode, Powermaster Prime can fully transform without the need to remove his head.
Here is another thing, people complain about the presence of stickers in a LEGO set. I have news for them, stickers keep down the cost of a set. The latest modular building will have stickers with it, but it isn’t the last time a set geared toward adults will have stickers with it. At least LEGO listened to our wishes and got rid of STAMPS (Stickers across multiple pieces). Still that modular will be the only set that will have a red baseplate and printed golden star tiles. Translation, that set will be very hot on the secondary market when it is retired. It is going to be very hard to source out the baseplate if people try to build Palace Cinema by sourcing its parts. (Which is a project some are doing with Cafe Corner and the UCS Falcon)
A gold-chromed version of the Voyager Optimus Prime toy was available as part of the same Lucky Draw contest as the Golden Protoform Optimus (see above) in the December 2007 issue of TV Magazine. Limited to only 3 pieces, it is insanely rare. The photographed sample here features a chromed truck grill, while a boxed unit has an unchromed grey grill; the owners of both pieces, the Mapes Brothers of Transformers @ The Moon, believe both are genuine TakaraTomy toys, so it unsure if the one with the chromed grill is a testshot or a production variant.
Smash & Change Optimus Prime is a simple figure that transforms by "smashing" the rear end of the truck/the robot's feet into the ground. He features only elbow articulation in robot mode, and includes a sword accessory that can be held in his hand or mounted on the side of his truck mode. The handle on the rear of his truck mode is molded to emulate his Vector Shield.
The San Diego Comic-Con 2017 exclusive Optimus Prime figure is another redeco of the Premier Edition figure, which aims for a more movie accurate look than the original by still sharing the same paint masks, but replacing the chest's deco with flames and adding extra paint applications on the legs, arms, chest, head, tire rims, both sides of the engine compartment, and the sword and shield... but for some reason still sports the movie-inaccurate blue 'collar', as well as the smaller, less accurate vehicle flame tampographs instead of the more movie-accurate ones used on Dark Optimus Prime. His Autobot insignia is also moved on the upper back section of the air dam. He is packaged in a stylish, display-case-like-box similar to later Transformers: Alternators releases and the Hasbro Toy Shop/SDCC 2011 exclusive figure.
Part of the first wave of Prime Series 2 Cyberverse Commander Class toys, Optimus Prime is a smaller-scale toy, and features translucent plastic for his torso so that the toy can be illuminated using the electronic lights featured in the larger playsets. He comes with two translucent "battle cannon" weapons which feature multiple 3mm posts and ports, allowing them to be held by his hands, or store/mount onto numerous ports on his person. Additionally, he features a 5mm port for a trailer hitch.
Available only at Kay-Bee toys (well, at first), Machine Wars Optimus Prime is a redeco and slight modification of the European Generation One exclusive Turbomaster leader Thunder Clash, transforming into a Cybertronic truck cab. It also lacks the mouthplate, revealing the mouth. The trailer unit unfolds to become a missile-launching assault tower. The tower's gravity-feed missile launchers were retooled to accommodate the new, longer spring-loaded missiles in lieu of the much smaller original projectiles due to projectile choke-gate safety testing.
A Toys R Us-exclusive item, this Titanium two-pack features the previously released War Within Optimus Prime and the upcoming War Within Megatron figures. Also included is an exclusive variant cover War Within comic book. Missing, however, is the unique base that comes with all single-pack 6-inch Titaniums (including the original release of War Within Optimus). The Megatron figure is also lacking its base, this despite bases for both figures being depicted on the instruction sheet.
Yet another Reveal the Shield redeco with the Motorbreath retooling, Convoy is cast in clear red and black plastic. He has been retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock. Convoy was available at a variety of 2014 events, including on May 3 at a "Kids Walk" event at Fuji Speedway, in special packaging on May 16 at the "Transformers Celebration 2014" midnight event at the Sunshine City Toys"R"Us store in Ikebukuro, on June 15 at Tokyo Toy Show 2014, at the Aeon Mall in Kasukabe on July 19, and at the "Transformers Expo" event in Yokohama on August 9. Convoy was also available as one of three preorder bonuses for Cloud Roadbuster.
In the Japanese exclusive Transformers: The Headmasters storyline (which replaced the "Rebirth" finale in Japanese continuity), Hot Rod appeared as part of Optimus Prime's inner circle. When Galvatron and his Headmaster warriors launched a devastating attack on Cybertron, Vector Sigma was damaged, and Hot Rod was sent to Earth to retrieve the Matrix. Recovering it, he returned it to Prime, only to be surprised when the ghost of Alpha Trion once again reformatted him into Rodimus Prime to help Optimus. After Prime's second death, Rodimus once again took command of the Autobots. However, when Scorponok destroyed Vector Sigma, Rodimus decided to leave the war, and left Fortress Maximus in command of the Autobots.
Optimus Prime also appears in the text-based fiction Dungeons & Dinobots. He commands the Autobots to attack the Arch-Ayr fuel dump. The attack is thwarted when the main Decepticon forces are augmented by the Mayhem Suppression Squad. When Wheeljack attacks both the Autobots and Decepticons with a massive force of drone Dinobots, Optimus offers to allow the outcast Autobot scientist to rejoin the Autobot ranks if the Dinobots destroy the Decepticons. The Dinobots prove unstable and go on a rampage, attacking everyone, including each other. Optimus punishes Wheeljack by having Ratchet painfully reformat him for Earth mode and assigning him to the Ark repair crew on the advice of Side Burn. He punishes Blurr for allowing his heroic Decepticon cousin, Crasher, part of the Mayhem Suppression Squad, to live. When Grimlock returns to the Autobots, Optimus lets him live because the Dinobot has gained useful intelligence and helps in work on the Ark.
This Optimus Prime is an extensive screen-accurate redeco of the Dark of the Moon Supreme Class/Leader Class Striker retool, using the Ion Blaster accessory from the Buster Optimus Prime and the Toys R Us Japan-exclusive battle blade accessories. He also comes with the Knuckle piece and the Battle Hooks and uses the 2-2-1 articulated fingers featured from the second Asia Premium Series release. He also features a Japanese language sound box for his voice gimmick, replacing Peter Cullen's "I am Optimus Prime" voice line.
A redeco of the sword-wielding version of Battle Masters Optimus Prime, Silver Knight Optimus Prime is a non-transforming "Rock 'Em Sock 'Em Robots"-like toy with arms that punch through the use of levers in his legs. He can also be placed on the included controller handle, allowing the punches to be activated with a pair of triggers. Optimus Prime was only available in a Target-exclusive two-pack with Grimlock.
This increase in average piece count could be a factor in why LEGO is perceived to be more expensive now than in the past. LEGO sets have become larger and more complex. They have started to market directly to an older crowd with sets such as the Modular Buildings and the Architecture series. These new sets have rekindled interest in LEGO for an older generation but at the same time, it has introduced this same generation to the relatively high price of LEGO sets.
Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.
The actual events of the Autobots and Decepticon coming to Earth were never printed by Dreamwave comics, but flashbacks of the events are printed later. These flashbacks suggest that the Autobots allied with humankind and defeated the Decepticons at the turn of the century. They planned to return to Cybertron aboard the newly constructed Ark II, but the ship was destroyed as part of a military conspiracy to take control of the transformers. A terrorist organization, run by the enigmatic Lazarus, was able to seize control of several of the Transformers that fell back to Earth while the U.S. military was occupied with locating Prime's body. Before his departure, Prime had entrusted a small portion of the Matrix to Spike Witwicky, who was forced by the product chief, General Hallo, to use it to reactivate Prime. Functional again, Prime used the Matrix to reactivate more of his fallen comrades, and then faced off against Megatron in San Francisco.
As one of the first Transform Jr toys, this version of Optimus Prime was released under the early name for the series, Transform Gōkin. As a smaller, simplified version of the original Generation 1 Prime figure intended as a low-cost alternative for younger children, Prime features a similar transformation, with a removable head in addition to fists, but lacks rubber tires and translucent windows. As with most other Transform Jr figures, he lacked any of his major accessories, coming only with his rifle and a cardboard replacement for his trailer that had to be assembled by the buyer.
On another plane of existence, Optimus travelled the path to the Matrix, guided by the voice of his old mentor Alpha Trion. The path led him to Grimlock, who had also been killed by Megatron; Prime rescued Grimlock from Kremzeek, the demonic eater of souls. At the gateway to the great beyond, they encountered Bludgeon, who announced that only those who bore the "key to Vector Stigmata" may pass through. Prime realized that the wounds on his body form the key, but the angel insisted that these would grant Prime access. Prime took Grimlock's sword and bestowed the key on Grimlock, allowing the former Autobot King to ascend into the Matrix while Prime stayed behind. Transformers vs. G.I. Joe #12
It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
Minor note: Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
When you’re a Cybertronian robot-alien who could easily blow any human to bits if you wanted, having a license plate can’t be that important. Really, if you’re in car mode and a cop pulls you over for not having plates, and sees that you also don’t have a driver, and then perhaps sees you turn into a giant robot, what exactly is that cop going to do?
A retool of Crash Combiner Optimus Prime available in a two-pack with Grimlock, featuring a new Optimus Prime-ish Combiner head and new arm parts with a green dinosaur-themed front shoulder pads, and he features a lighter shade of red plastic. Like the previous versions, Optimus Prime can become the top half of any Crash Combiner gestalt, though his official combination is with Grimlock as Primelock.
TakaraTomy released another reissue based on the Encore version as part of their Chronicle line in 2011, lacking the original Generation 1 trailer. Instead, the Chronicle version was available in a two-pack with Dark of the Moon Deluxe Class Optimus Prime and a new trailer that could be used by both Optimuses, thanks to a retooled trailer hitch on the Generation 1 Optimus Prime figure.