This redeco of Henkei Convoy is cast almost entirely in translucent colored plastic. Also known by the nickname "Crystal Convoy" among fans, it was first released as an exclusive for the Japanese convention Tokyo Toy Fair 2008, limited to 1000 pieces at the event, but was later made available through e-HOBBY. It was sold in a monochrome-blue version of Henkei Convoy's regular packaging.
Unlike the other Swordbot toys, Optimus Exprime's kabuto helmets form an integral part of one of his alternate modes. The kabuto helmet designed for use with his DaiGekisou combination forms the head of his dragon form, while the kabuto helmet designed for use with his DaiKenzan combination forms the "tail" of the same. He comes with two HUGE swords (with 5mm handles) which can be attached to several places on his kabuto helmets or either alternate form, held separately in his hands, or held both in the same hand (with one held in reverse-grip).
Chronicle "Movie Optimus Prime" is an e-Hobby exclusive redeco of the Deluxe-Class Dark of the Moon Optimus Prime figure, and comes in a two-pack with a reissue of the Generation 1 Optimus Prime figure. Instead of the blaster/axe MechTech weapon the original release of the figure came with, Prime is armed with a redeco of Dark of the Moon Jolt's Blaster/Hand Cannon weapon.
Released as part of the first wave of the Cyberverse Commander class figures, this Optimus Prime is a roughly Scout-sized figure.He comes with a jetpack that can combine with both his truck and robot modes. The jetpack attaches via C joint clips, and the jetpack can transform in and out of a winged configuration when Optimus is in truck mode. Optimus himself features C joint bars for his smokestacks and trailer hitch, as well as bars on the top of his headache rack, while his hands and jetpack can hold/mount his rifles via C joint-related 3mm clips/holes.
The mid-range Voyager class Movie Optimus Prime toy transforms into an amalgamation of the Kenworth W900 and the Peterbilt 379, making this toy fairly inaccurate to the actual vehicle Optimus Prime turned into. Because of the smaller size and lessened complexity, the Voyager class Optimus Prime features a significantly different transformation sequence compared to the Leader class toy, and indeed, the actual CGI design. However, as the actual truck cabin no longer forms his chest, the cabin now features a small interior with opening doors and a non-removable cowboy-hat-bedecked driver figurine that flips out of the seat when the driver's side door is opened.
Forming a roughly 11-inch figure when fully assembled, Diablock Convoy is highly articulated, using 12 ball-jointed block pieces, giving him a range of motion similar to Masterpiece Prime, with the exception of the head, which can only move up and down, not side-to side. Speaking of the head, it is by far the most stylised aspect of the figure, with no real attempt to approximate Prime's face or mouthplate inside a simplified helmet, mainly featuring only a reversed block that gives the odd impression of a cycloptic eye. It is possibly intended to actually represent his forehead grill, as a yellow block inside his head construction remains barely-visible through a slit in his face, possibly intended to represent the classic toy's yellow eyes.
Originally, the Alternators Dodge Ram mold was intended by Hasbro to be a completely different character altogether than Optimus Prime (which character is unknown), but Takara reportedly demanded the Ram be made into Optimus out of fear that the toy (whose vehicle mode is scarce in Japan as a real vehicle) wouldn't sell as well in their market if it wasn't a popular and easily recognized figure; as the figure reportedly cost twice as much to build as the others, Hasbro had to agree in order for Takara to continue fronting part of the production cost. In an ironic turn of events, the Dodge Ram was prematurely solicited by Takara not as "Convoy" (Optimus Prime), but as his Masterforce look-alike Ginrai. As a matter of fact, the head sculpt for the Alternators Oprimus Prime toy is based on the Super Ginrai (Powermaster Optimus Prime's "super mode") toy's head sculpt. Ultimately, however, Ginrai was cancelled, with only Hasbro releasing Optimus Prime as originally planned. Eventually, Takara released the Dodge Ram as as part of the new Kiss Players line, now named "Convoy" (Optimus Prime), and he will be released in Binaltech this year.
A K-Mart exclusive set released on "Black Friday" (the day after Thanksgiving, the most hellishly busy shopping day of the year), this set consists of Super Base Optimus Prime, Jetfire, their respective partner Mini-Cons Sparkplug and Comettor, the Adventure Mini-Con Team, and oddly enough, Longarm. Optimus Prime's red plastics and paint were replaced with gold, the only changes made to anyone in the set. It is this set from which the name of Optimus Prime's combined mode with Jetfire, Jet Prime, comes.
Outstanding work here. After reading a number of complaints about how the price has ‘increased’ over the years, it’s great to see this analytical approach. One additional hypothesis I have is related to the increase in the number of sets released each year, which would appear to be supported by your data. More sets to buy to be ‘complete’ makes for more money out of pocket.
For some reason: unlike the stock photos (pictured from the right), This Custom Kreon had a slight QC issue to the opaque and transparent helmets: One had two sides sculpted, while the other one has the small flat square sculpt (similar to the details on Hound's helmet) on the right side. Several samples had two different "variants": One with the perfect transparent helmet & a differently-sculpted opaque helmet, while the other one has the opposite. However: later releases fixes the problem by a running change.
Being a Combiner Wars Voyager, Prime is naturally capable of transforming into a torso mode to combine with any 4 Deluxe Class Combiner Wars-style toys, though his packaging call-out has him form Ultra Prime by combining him with Deluxe Class Skydive and Alpha Bravo as the arms, and with Firefly and Decepticon Drag Strip as the legs. He can combine with Sunstreaker, Mirage, Prowl, and Ironhide if one wishes to have an IDW-accurate Optimus Maximus.
We say "intended", because in actuality, the thing appears to have been produced in such huge quantities that it's wound up being made available in loads of other places—it was handed out at San Diego Comic-Con 2011, offered as a free giveaway with any order that included Transformers toys on Hasbro Toy Shop), as a free gift on the cover of the Awesome Autobots Activity Book, and came as a free gift attached to, of all things, issue #240 of the UK children's comic, Doctor Who Adventures (but not the UK's Transformers comic, you'll note!).
The original Optimus Prime toy was a re-deco of the Diaclone Battle Convoy toy and transforms into a late 1970s red Freightliner FL86 Cab-over-Engine triple-axle semi trailer truck. The truck mode features rubber tires, and the cab is partially constructed of die cast metal. The windscreen section can open to reveal ultimately-unused seats that were originally designed for driver figures part of the Diaclone line. His trailer opens up into his Combat Deck, which features a missile-armed repair drone pod (with seating for one) mounted upon a boom lift arm. Situated in the base of this boom is a spring-loaded launcher that can be used to launch Roller out of the Combat Deck. Roller himself has seating for 4 passengers, and can be equipped to carry Optimus Prime's rifle or a fuel pump. The interior space of the trailer allows storage room for one Autobot car. In robot mode, he is armed with a black laser rifle, that, due to design, cannot be held straight. His fists are separate pieces which must be stored elsewhere in vehicle mode; there are pegs to store them in the trailer.
For the Generation 2 toy line, the original Optimus Prime toy was altered somewhat and an electronic sound maker was added. Later Generation 2 toys of Optimus were completely new designs, such as Combat Hero Optimus Prime, Laser Optimus Prime, and Gobot Optimus Prime, who could become a red Lamborghini car. In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film. In 2006, Hasbro introduced Alternators Optimus Prime, which turned into a licensed 1:24 scale model Dodge Ram SRT-10. In 2011, Takara Tomy released MP-10 Convoy, a smaller, more show-accurate version of the Masterpiece Optimus Prime figure.
A highly CG-accurate sculpt of Optimus Prime's head with a built in voice-changer. It also has several sound effects and quotes from the movie. The voice-changer has three settings, giving more accurate alteration of the user's voice (though this is still debatable; most voice changing technology is pretty crummy, at least in toys). Much like the Ultimate Bumblebee figure, this toy will hate your wallet too. While it only costs 30 bucks, if it's anything like another Hasbro voice changer, it will suck batteries up like they were some kind of square candy holder.
Optimus Prime was subject to several molding and color variations in his early days. The earliest release of the figure featured larger fists, a gun with a thick, round barrel, a slightly-differently shaped gas pump, grey rockets, a grey Roller, a grey launcher in his Combat Deck, and metal plates in the floor of the Combat Deck (a holdover from the Diaclone version of the toy, to which the magnetic feet of the pilots could cling). In short order, his fists were slimmed down, the gun's barrel was pared down to a more slender form, the gas pump's shape was altered, the rockets and launcher were recast in black plastic, the metal plates were removed from the Combat Deck, and Roller's color was changed to a light blue. Along with Roller's color change, however, the Combat Deck's drone pod also became light blue, and a third running change soon followed that saw it restored to its original darker blue, and Roller changed along with it. These modified components would become the default accessories used by subsequent reissues of the Prime toy would take, though Roller stills fluctuates back and forth between grey and dark blue, depending on how show-accurate each reissue wants to be.
Smallest Transforming Prime was redecoed the following year for the second wave of the line, into a color scheme based on his Generation 1 cartoon appearance featuring brighter reds and blues, white thighs, yellow details on his bumper, and blue eyes and windows. This version of the figure was made available for a second time in the next wave ("Wave 2.5"), with a new anime-decorated version of the Combat Deck now available as a rare "chase" figure.
Arms Master Optimus's "Space Blaster Mode" is a mode designed for fighting in outer space, introduced in the Cybertron Satellite segment of "Infinite Transformation! Multiplying Enemies". He wears R.A. and Shining R.A. on his shoulders as wings, C.L. and C.L. GR on his back as thrusters, and B.H. and B.H. B on his feet as... more thrusters. His weapon of choice in this mode is the Matrix Blaster.
Bumblebee seems to have finally settled on one mode for the film franchise: the Camaro. Chevrolet had actually stopped producing the Camaro in 2002, after having it in their stable since 1966. It wasn’t without controversy that Bay and company decided to make Bumblebee a Camaro for the first live-action film in 2007, but Chevrolet used the product placement opportunity to help relaunch the brand.
Henkei! Henkei! Transformers Convoy is a redeco of Classics Voyager Class Optimus Prime. He features a significantly altered colour scheme, generally to make the toy more closely resemble his appearance in the Generation 1 cartoon and the original toyline. His truck mode features less silver paint striping, but compensates with a vacuum-metalized grill/fender area. In robot mode all of his previously grey plastic is replaced with red plastic, with a majority of it being painted silver, chromed, or painted gunmetal gray. He features a different shade of red, blue, and clear blue plastic than the Classics version. Since Henkei! toys do not feature a heat-sensitive rubsign, Henkei Convoy has two Autobot sigils tampographed onto his shoulders.
Part of Hasbro's Platinum Edition offerings for 2016 intended to commemorate the 30th anniversary of The Transformers: The Movie, this Optimus Prime is yet another redeco of the Classics Voyager toy. Rather than the show-accurate colors like the Age of Extinction 2-pack figure, the toy's deco is very similar to the Classics release, with some changes and omissions: his blue plastic is a dark metallic sheen, his knee's yellow detailing was removed, his small Autobot symbol tampograph was placed on his right shoulder, and his larger one is placed on his energy unit. His side door/arm kibble is left unpainted. According to Mark Weber, this was meant to represent his abdominal area being torn in the movie's battle. (Yeah, we have no idea how it works, since the "battle damage" parts end up on his arms in robot mode.)
Jetwing Optimus Prime is a retool of Revenge of the Fallen Leader class Buster Optimus Prime, with an accompanying large jet pack and massive dual Gatling Cannons. The base Optimus Prime figure has several modifications including: a new stomach area and elbow flares to reflect the changes to Optimus Prime's CG model in Dark of the Moon, modified lower arms to incorporate MechTech ports and clips for the cannons, and a retooled area under his back so the jet pack can fit on more securely. The dual energon blades mounted on his arms have been removed. The toy retains Buster Optimus Prime's electronics, but batteries are not included.
Brian Colin, Peter Smyth, Mark Buffington, Josh H., Propelstalz, Mary Crocker, Wayne Moulton Jr, Mitch Gross, Jim Valko, Andrew Brown, Lucy Ravitch, Nicholas Duresky, Heather Hofshi, John Kemp, Thorsten Karge, Natasha Dzurny, Keith Ives, Benjamin Chan, Neal Bhatnagar, Justin Farr, Regan Lee, Elaine, Nate Fugal, Stephanie Tennison, Jon Rasmussen, Ryan Pulis, Owen Duffy, Colman Reilly, Anthony, Mark Richman, Alexis Ohanian, Steve, Greg “TVsEgon” Skinner, Andy Saavedra, Daniel, Willie Raymond Taylor III, Chad Ingham, Irene Christian, Clinton Richmond, Jamey Stegmaier, James Allenspach, John Howell, Leif Terry, Tiago Pereira, Nathan Heath, Grinidon, Roman, Berserker Hew, Clark Stacey, Ben Harkins, Kayvaan Ghassemieh, Travis B., Justin Myers, Magna Nordgard, Jim Griffin, Jeff, David Smith, Matthew Titelbaum, Dennis Hitzeman, Daniel Lieske, Michael Jantze, Ruddy, Tom Damico, Kelson, Michelangelo Grigni
If instead of all heading into the lab together, the Autobots had sent in Bumblebee alone, and Bumblebee subsequently managed to escape with the antidote to the Decepticons’ poison, the Autobots escaped from the Valley of Poison and returned to Autobot headquarters. Once the other Autobots were cured, they all drank a toast to Bumblebee, to celebrate his part in the mission Decepticon Poison
The price per minifigure has definitely gone up in the past 5 years. You used to be able to get 4 minifigs (along with some other stuff) at the $9.99 price point, now these are $12.99. And there are fewer minifigs in most $19.99, $29.99, etc. sets now. Lego Minifigures Series 1 was $1.99 each, subsequent series $2.99 each – I know it’s supply and demand, but it still feels kind of exploitative. I admit the cleverness of the builds keeps improving though.
Shortly after reaching the other shore and taking out Skywarp, Prime witnessed the gigantic Bruticus bust out of the Terrordrome and attack everything around him. With Superion gone, Prime knew that there was only one way to stop this rampaging monster, and ordered his Autobots to evacuate the humans while he went looking for the Matrix of Leadership. He soon found that Snake-Eyes was in possession of the artifact, but was under attack from Megatron. Prime attacked Megatron, keeping him at bay while telling Snake-Eyes that destroying the Matrix would kill Bruticus. The ninja complied, only to learn that Optimus had left something out of the story: smashing the Matrix would kill all the Transformers, including Prime himself. Looking at the Autobot leader's body, the Joes knew that Prime had been aware of this, and had deemed it a necessary sacrifice to save the humans. The Iron Fist
A Leader class toy that transforms from fire truck to robot. The front end of the fire truck can form a robot resembling Generation 1 Prime, while the rear section can form a battle station or combine with him to form Super Fire Convoy. The rear section has an extending ladder with retractable water cannons and missile launchers. This battery-operated toy features siren sounds and voice samples of Fire Convoy (saying the lines, "Fire!" and "Kyoudai Gattai! Super Fire Convoy!"). Fire Convoy can combine with God Magnus (sold separately) to form God Fire Convoy. This toy was designed by Takara's Hisashi Yuki.
This version of Optimus Prime is an all new mold, being the most movie accurate so far — or at least he was until Buster Prime came out. It comes with his two energon blades, and does not have a large gap at the back of the cab like the previous Leader-class Optimus Prime. It can combine with Leader class Jetfire to form Jetpower Optimus Prime. He is also very hard to transform. The process involves unclipping his firewall from his chest in a fashion that harkens to dissecting toys that lack screws, rivets or glue. In the meantime, he keeps saying, "I am Optimus Prime," over and over due to an overly sensitive voice clip trigger. Even the most die-hard Peter Cullen fan will be sick of his voice after five minutes of playing with this toy. That aside, the quality and articulation is top-notch and the poseability is amazing. Spring-loaded panels feature in his legs as well as ratcheting ball-and-socket ankles, G1 "transforming" sound effects, and multiple "Mech Alive" features raise the bar on this figure. Of note, the fists cannot accomodate standard accessories, and on test-shots of "Power Up" mode Prime has articulated fingers, like the 2007 toy, but this feature was dropped. Also, trying to transform Optimus from robot to vehicle mode can be very difficult at first.
Produced to coincide with the 20th anniversary of The Transformers: The Movie and its release on DVD by Sony, this edition of Prime is a redeco of his 20th Anniversary figure. It replaces the original's metallic paint with flatter colors and does away with any and all vacuum-metalized plastic, as well as altering several other small details across the body, like the color of the lights on his feet and chest.
Omron's keychains were not limited to soft plastic, with die-cast versions of the same characters from the Mascot Keychain line being made available in their Transformers Strap range. This Prime is pretty much identical to the Die Cast Figure version of the character, just a little smaller—about 2.5" in height—and with the addition of a keychain with a wrist-strap.
A Voyager-class two pack of Classics Optimus Prime, representing the Generation 1 version of the character, and a redeco of Age of Extinction Evasion Optimus Prime representing the Movie character (The deco patterns is most likely to emulate the character's design in 2007, with vague results). Like Rusty Optimus Prime (seen below), he features flames on his vehicle mode doors.
Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). The main torso-bot is based on Generation 1 Optimus's original body. Another limb-bot is based on live-action Optimus (Soundwave helmet), and the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
This Optimus Prime is a somewhat/nearly screen-accurate redeco of the Leader Class figure, but uses the original Leader mold instead of the Armor Knight retool unfortunately. In comparison to the first Age of Extinction Leader Class figure, his vacuum-metalized front truck bumper, sun visors, robot mode chest, smokestacks and side tanks chest was omitted, revealing the grey plastic underneath. His chromed chest was also stripped of chrome for adding paint operations, his shield was unpainted, and both of his sword and truck mode windows were casted in colorless plastic. He also features some extra silver paint on his robot mode forehead, and his white-colored Autobot insignia is slightly tampographed on the left. And lastly, his light-piping eyes is neutered by blue paint.
This Japanese series, told through radio plays using the Transformers: Alternators Optimus Prime toy mold, branches off from the original animated series. It is set in a different universe than both the original G1 and Binaltech continuities. Set in the year 2006, one year after Prime's death in The Transformers: The Movie and four years before the third season, it sees Prime's corpse covertly transported to Japan by the Earth Defense Command, a government organization. The convoy transporting his body was attacked by a group of female commandos, led by Marissa Faireborn, who had known Prime years ago as a child. Believing they had secured Prime's body, the commandos were taken by surprise by EDC "Kiss Player" operative Ringo and her Autrooper mechanoid partner, who killed them all except Marissa. Marissa went to Prime's body just as an Autrooper began to fuse with it and, reflecting on her childhood memories of Prime, she gave his faceplate a final kiss. This initiated a transformation where Marissa and Prime were fused together and Prime was reborn with a new body, capable of transforming into a Dodge Ram SRT-10.
Released to conclude the 10th Anniversary of the live-action film series, Masterpiece Movie Series Optimus Prime is a brand new mold that transforms from a 25cm-tall robot (a little taller than MP10 Convoy) resembling how the character appeared in the first live action movie into a Kenworth W900 modified Peterbilt 379, with many of the engineering cues being distinctively based and improved on the ROTF Leader Class mold. His transformation takes a whooping 43 steps, making it one of the most complex Masterpiece figures to date! (Although this pales in comparison to MP-36 Megatron's 107 steps.) .
A giant-sized transforming Optimus Prime figure is set to be released for the third film. The set comes with a Leader Class-sized Optimus Prime figure and a trailer that transforms into his Omega Combat Armor - both of which combine to form Prime's Ultimate mode. This set will be released on August 1st, 2011, a month after the film's premiere.