Part of the first wave of Bot Shots Series 2 launchers, this new-mold Optimus Prime transforms into a very boxy Generation 1-styled truck with trailer. As a Spin Shot, one manually winds up his upper body beforehand when transforming him into vehicle mode, where striking the front of the vehicle will cause him to burst open and spin while auto-transforming. He comes with a launcher used to propel him to great speeds, as well as four cube targets for him to knock over.
Note: Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor and a stepup/stepdown transformer (the electrical kind) with advice from an electronics specialty shop is recommended.
Get ready to turn heads with TRANSFORMERS MIGHTY MUGGS Figures. Call it a moodswing, or call it a moodSPIN, these TRANSFORMERS MIGHTY MUGGS figures feature a push-and-turn mechanism that lets fans change the figure’s facial expression by pushing down on the head. With 3 different expressions and classic character designs, these figures will have fans doing a triple take. Characters include BUMBLEBEE, OPTIMUS PRIME, MEGATRON and more. Each sold separately. Available at most major retailers and on HasbroToyShop.com.
A gold-chromed version of the Voyager Optimus Prime toy was available as part of the same Lucky Draw contest as the Golden Protoform Optimus (see above) in the December 2007 issue of TV Magazine. Limited to only 3 pieces, it is insanely rare. The photographed sample here features a chromed truck grill, while a boxed unit has an unchromed grey grill; the owners of both pieces, the Mapes Brothers of Transformers @ The Moon, believe both are genuine TakaraTomy toys, so it unsure if the one with the chromed grill is a testshot or a production variant.

Just like Optimus Primal's basic bat toy, this figure was released during the short-lived period when the Beast Wars was still considered to be an extension of the Autobot/Decepticon war, and Optimus Primal was the same character as Optimus Prime. This was soon relegated to the realms of micro-continuity when the Beast Wars animated series began and clearly established that the two Optimuses were different characters, but the toy remains one that was officially branded as Prime, and is consequently listed here.
While the other Autobots searched for the Matrix on Earth, Optimus Prime searched for Vector Sigma, guided through the dangers of the planet's catacombs by the spirit of Alpha Trion. Prime eventually arrived at the computer, only to find his way barred by Cyclonus and Scourge. At that moment, Hot Rod arrived with the Matrix, the same with which Alpha Trion merged, re-energizing it. The Matrix transformed Hot Rod back into Rodimus Prime and, for the first time, the two Primes fought side-by-side and defeated Galvatron.

Optimus got Megatron's contact information off the internet and invited the Decepticon leader to BotCon 2009. Though it took some doing, he managed to convince Megatron that the convention would be worth attending. Optimus also planned on going to BotCon, and left for the convention alongside Wheeljack, Mirage, Ironhide, Jazz and Prowl. BotCon 2009!

The main build of the set is a massive vehicle based on Optimus's truck cab, capable of seating a single Kreon in the driver's seat. Pushing the trailer-hitch on the back end towards the cab opens up the front grill, revealing a huge spring-loaded rocket launcher with rubber-tipped projectile. The cab can also stow the included stasis pod ussed to lock away the baddies.

When Optimus and Hound eventually made their way there, they found that C-81 and his gang of criminals had escaped prison and were combating the Waruder soldiers responsible for the planetary shutdown. Optimus mistakenly assumed that C-81 and his goons were there on purpose, and joined them in fending off the invaders. They were soon joined by Burn Out and Lift-Ticket, who informed the Cybertronians that they had stumbled across the Waruders' main hive. Lift-Ticket explained the Waruders could be repelled if he managed to get a sample of the hive's venom. Optimus was willing to go along with Lift-Ticket's dangerous plan, despite C-81's skepticism. However, the battle came to an end when C-81 managed to grab a hold of the Waruders' leader, and forced the bug into peaceful negotiations. Optimus agreed to allow the Waruders to migrate to another Cybertron via C-81's illegal interuniversal gate, in exchange for a venom sample that would be used to create an anti-toxin to revive the TransTech. The General nonetheless impounded C-81's gate afterwards, though he did let the criminals "slip away" as thanks for their part in thwarting the Waruder invasion.


Available exclusively through e-Hobby, this black and teal repaint of Hybrid Style Convoy features the traditional "Nemesis Prime" color scheme, but represents a version of Optimus Prime himself. In addition to all the original accessories, the toys also includes several more deliciously metatextual goodies, themed around the Generation 2 toy and comics: two new large guns patterned after the new weapons wielded by the Generation 2 Optimus Prime toy, and two additional (blue) Prime heads that can be swapped with the figure's regular noggin, sculpted explicitly in the style of Generation 2 comic artist Derek Yaniger. One head is pristine, the other decorated to match the battle damage seen on the cover of the first Generation 2 issue.
1. Color diversity: Back in the 80s, most sets were comprised of a few basic colors; red, blue, yellow, white, gray, and black. It was much easier to acquire a “critical mass” of pieces in each color to start building one’s own creations in coherent color schemes. Space, Town, Castle sets all had the same basic colors. Today Lego uses a much wider array of colors in their sets. While this adds a lot of variety and visual appeal to today’s sets, this means that one has to buy a much larger number of sets (or scour bricklink) to get achieve a workable critical mass of pieces in each color. After buying some of the modern sets, I end up with a few dark-blue or lime-green pieces that I don’t really have enough to much with other than use as accent colors. They end up in my misc color bin in the event I decide to build the set they originally came with or sell them off on bricklink.
Part of the fifth wave of 2012-onwards Generations Deluxe Class toys, Thrilling 30 Orion Pax is a new mold with a robot mode inspired by Guido Guidi's design for the character, originally seen in Spotlight: Blurr. Some liberties have been taken with the original concept to facilitate his truck mode, which is a new design not based on the Guidi art. He comes with his Ion Blaster and an Energon Axe with a transparent red-orange blade, both of which can peg onto 5mm ports on his hands and vehicle rear sides. Although not depicted on the instructions, the Ion Blaster can also peg into the hole in the larger blade of the Energon Axe.

This release is another redeco of Cyberverse Optimus Prime, this time with a predominately navy scheme with black accents (which vaguely resembles his Generation 1 colors), and a pair of barrage cannons that can be either held or mounted on his smokestacks, as well as a pair of handheld swords. He is compatible with all his previously released Cyberverse accessories, but not all at once.
1.) MP 10 EVA. Its arguably the best mold of any figure, and that color scheme! 2.) MP 12 Lambor. My fav transformer aand my fav car as a kid, cant beat it. 3.) MP Grimlock. Robot mode just looks like be dominates the shelf, regardless of who be is next to. 4.) MP Exhaust, mostly bc of the novelty factor as he is a pain to get in the States, plus his back story is cool. If not for that, MP 11 Skywarp would take this spot. 5.) MP Soundwave w/ cassettes. Duh!

Rodimus appeared in the text-based fiction Dungeons & Dinobots as one of the Autobots who attacked the Arch-Ayr fuel dump. Sent to capture rogue Dinobots for the Autobots, he was part of the group that captured Swoop. Together with Blurr, he then tracked Grimlock, but ran into competition with the Decepticon allies Sideswipe and Cliffjumper. After Grimlock bit off his left hand Ratchet replaced it with a circular saw (a reference to one of the original Rodimus' melee weapons in The Transformers: The Movie).


Forming a roughly 11-inch figure when fully assembled, Diablock Convoy is highly articulated, using 12 ball-jointed block pieces, giving him a range of motion similar to Masterpiece Prime, with the exception of the head, which can only move up and down, not side-to side. Speaking of the head, it is by far the most stylised aspect of the figure, with no real attempt to approximate Prime's face or mouthplate inside a simplified helmet, mainly featuring only a reversed block that gives the odd impression of a cycloptic eye. It is possibly intended to actually represent his forehead grill, as a yellow block inside his head construction remains barely-visible through a slit in his face, possibly intended to represent the classic toy's yellow eyes.
As leader of the Autobots, Prime headed up their mission to search for new sources of energy to revitalize the depleted Cybertron. Optimus vowed to Elita that he would return from his mission for her, but just before the launch of the Ark, Optimus was mistakenly led to believe that Elita was killed. Shortly after its launch, the Autobots' craft was attacked by the Decepticons' space cruiser, the Nemesis, and boarded by Megatron and the Decepticons. In the ensuing struggle, the G-forces of a nearby planet pulled both craft down, and the Autobots' ship crashed into a volcano, thrusting all the occupants into emergency stasis. Four million years later, in the Earth year 1984 A.D., a volcanic eruption jarred the ship's computer, Teletraan I, back to life. The computer reactivated the Decepticons, programming them with new Earth-based disguise modes. As a parting gesture, Starscream fired upon the Autobot ship, creating a landslide. The vibrations from that landslide knocked Prime into the path of the computer's restoration beam, restoring him to life, thus beginning the war anew on Earth.
The "Unicron Trilogy" version of Optimus Prime is a fictional character of this branch of Transformers lore. Appearing in Transformers: Armada, Transformers: Energon and Transformers: Cybertron (known as the aforementioned trilogy), Optimus is the leader of the heroic Autobots. He often converted to his super combat mode. In all three series, Optimus' English voice actor is Garry Chalk, who previously voiced Optimus Primal in Beast Wars and Beast Machines.
The trailer unfolds to form a battle station bristling with many firing weapons. Primarily, it can fire an air-powered missile launcher, a ripple rocket launcher with 5 missiles that can be launched individually (this turret can also be mounted in Laser Prime's hand) and a 'disc launcher', that fired several blue plastic discs adorned with the Generation 2 Autobot sigil. This disc launcher is the only weapon that can be used in vehicle mode.
Optimus Prime was blasted into pieces by Dragon Megatron. Beast Wars Metals #5 Fortunately, his spark remained perfectly intact—in the remains of his Matrix-shaped spark chamber. Megatron was going to destroy Prime's spark, but Cheetor (now in his Transmetal body) saved it. Prime's spark was eventually swallowed by Optimus Primal, who was upgraded into Optimal Optimus by doing so.
Additionally, Star Convoy transforms into a large battle station that interacts with the Micromasters that made up the vast majority of the Transformer toyline at the time. His chest contains a peg that allows Micromaster figures to stand inside it in either robot or base modes, and he comes with a unique Micromaster version of Hot Rod not available on its own. He features storage space in his legs for two spring-loaded figure-launching Micro Trailers, and comes with one of his own, decorated in a unique black and orange color scheme. In this mode, two ramps are connected to the Microcarrier; when the carrier's treads are set rolling, they do not move the base, but instead act as conveyor belts that carry Micromaster figures down the ramps. The Microcarrier also spins a gun turret mounted between the conveyors, on which Micromaster figures can stand. Finally, a special connector packaged with Star Convoy allows the Microcarrier to be connected up to Grandus's base mode, powering his moving elevator.
Star Convoy was reissued by Takara in 2005, with some notable alterations to his deco: his white plastic was replaced with metallic silver, and the yellow star on his chest was chromed golden. Star Convoy himself retained some of his original decals but most notably his "simulated head lights" and "wind shield panels" were stamp graphed on him, similarly, Hot Rod's were replaced with the same stamp graphing applications. Additionally, where the original toy had been packaged in robot mode in a tall box decorated with the standard Japanese package art of the time, the reissue was packaged in vehicle mode, in a long, wide box more reminiscent of the original Generation 1 toys.
Somewhere along the line, G.I. Joe picked up the familiar storyline that we all best associate with the toys: G.I. Joe Team vs. the Evil Cobra Organization. A classic tale of good vs. evil. Well guess what. Somewhere else along the line the franchise picked up a very different storyline and a new look to boot, highlighted by the newest figurine: The DARK NINJA MASTER.
If Optimus ordered his troops to come to the humans’ aid, they found themselves taking part in a struggle in futility, as the entire town was near-weightless, meaning they couldn’t put the humans anywhere where they wouldn’t float away once more. Then, the Autobots heard Decepticons approaching. Helpless in their current position, the Autobots were quickly eradicated by the Decepticons.
×