This TakaraTomy Asian market-exclusive Leader Class two-pack consists of a redecoed Jetfire and a slightly altered Buster Optimus Prime. Buster Optimus Prime is almost identical to the single-pack Japanese release of the toy, but unlike the standalone Buster Prime, has a head with a faceplate, itself containing more paint details than the first release of Revenge of the Fallen Leader-class Optimus Prime. The flames are outlined with light blue instead of white for accuracy to the physical truck prop (though it ends up being inaccurate in robot mode). Jetfire has a subtle, more movie-accurate colour scheme.
Legends Class Optimus Prime is based on his original Generation 1 appearance. He features a fake grill for his robot mode, and his large legs result in a fairly thick and compact truck bed. He is part of "Reveal the Shield", a subline that outfits all its toys with rubsigns, and in this case, it's located on the left side of the truck/his left elbow.
LEGO is not a cheap toy and has never been. The brand has stood for nothing but the highest quality and hopefully any issues it has had with changes in manufacturing are only the result of temporary growing pains. Next time you are out buying a LEGO set for a loved one or for yourself, take a second to thank everyone who ever bought one for you as a gift.
Using the Spacebridge to travel to Earth, Prime was sidetracked when Megatron transported him to Unicron's body. Megatron attempted to cajole him into distracting Unicron long enough to transfer his consciousness into a new body. Prime refused until Megatron showed him what was happening on Earth. A massive Terrorcon invasion had devastated many of Earth's greatest cities, with the stalwart Autobot defenders nearly overwhelmed. Megatron offered to deal with the invasion if Prime would aid his rebirth. Out of options, Prime agreed, and battled Unicron's internal defences to disable a sensor, allowing Megatron's resurrection. As Megatron teleported to Earth to keep his end of the bargain, Prime, still inside Unicron, prepared to fight back.
G1 Convoy comes with two sets of fists, each pair featuring differently-shaped fist holes: one pair with square holes to hold the figure's "Convoy Gun" (as his ion blaster is called), and the other with round 3mm-compatible holes to hold the spring-loaded translucent blue missile launcher (a generic accessory also available with Robotmasters Beast Megatron and Beast Convoy). The fists are swapped out by simply popping them out of the wrist-hinge that holds them in place; the figure also includes an energon-axe that can be inserted into the wrist instead of a fist.
A golden-chrome redeco of Cybertron Metroplex was offered as a contest prize in the December 2005 issue of TV Magazine, and came with an equally blinged-out Legends/EZ Collection Optimus Prime figure. Fifteen of this set were available as prizes in the initial contest; a single Metroplex was later offered as one of many prizes in a Takara website contest, but this version came only with the standard metallic paint version of Prime.

In an alternate version of the following events, Bumblebee would return to base, reporting that the Decepticons were planning to destroy the humans' farmlands in an attempt to starve mankind and force them into submission. Upon hearing these news, Optimus gathered a squad of Autobots and headed out to stop the evil robots. However, once they found themselves in the open country, they found themselves at the mercy of a Decepticon ambush; Bumblebee had been fed false information! In one iteration of the events that followed, Optimus could have avoided his death if only he had listened to your warning! In another iteration, Optimus had to decide whether he should send his Autobots away to the safety of a nearby bridge while he fended off the encroaching Decepticon horde, or if he should remain by the side of his troops as they all made a break for the bridge. Remaining as a single unit would spell their doom, but by sticking together, the Autobots could make it back to the safety of their base. Battle Drive


Arms Master Optimus's "Space Blaster Mode" is a mode designed for fighting in outer space, introduced in the Cybertron Satellite segment of "Infinite Transformation! Multiplying Enemies". He wears R.A. and Shining R.A. on his shoulders as wings, C.L. and C.L. GR on his back as thrusters, and B.H. and B.H. B on his feet as... more thrusters. His weapon of choice in this mode is the Matrix Blaster.
The instruction manual for the MP-04S Convoy Sleep Version reveals a hidden message saying that Rodimus will be the next installment in the Masterpiece series. Concept sketches of the figure were released online in July 2010. The figure is a faithful modern recreation of the original G1 toy. Gimmicks include retractable binoculars, spinning saw blade and the Matrix of Leadership, but the figure's main feature is the ability to transform into both Hot Rod and Rodimus Prime. The transition between the two incarnations involves rotating the face, extending the legs and adjusting the spoiler on the back.
Optimus Prime Special Color (オプティマスプライムクリアVer, Optimus Prime Clear Ver) was only available blindpacked as part of TakaraTomy's EZ Collection Vol. 3. It is a clear version of the Revenge of the Fallen mold, casted in (entirely colorless) clear plastic with opaque paint operations (which is the same paint mask from the original Legends Class toy albeit slightly darker) on the details. This redeco also uses the slightly small fuel tank/elbow tabs from the Battle Damaged release.
Released in the first wave of the Authentics toyline, "Autobot Optimus Prime" is a new mold the size of a 2015 Robots in Disguise Battle Pack toy. He changes from an evergreen-inspired robot into a more G1-based truck in just four steps. His instructions are incorrect; for truck mode, his legs must be folded in before the arms, otherwise the locking tabs on the arms will get in the way. Due to his transformation, he ends up with no elbows and a fake chest. He also has problems standing up due to hollow legs.

Power of the Primes "Evolution Optimus Prime" transforms from a truck with a trailer into a robot and back. The individual truck transforms into his "Orion Pax" form based on his appearance in the Generation 1 episode "War Dawn", and he is able to form the core of Optimus Prime's robot mode. His trailer forms Prime's entire body, and his ion blaster can be split into two weapons. He includes the Matrix of Leadership, which can store in his chest in the 'Evolved' form. The center of his Matrix of Leadership can be replaced with any Prime Master. In an undocumented feature, his rifle can be stored on his back as Optimus Prime by pegging it into Orion Pax's hands.The Takara version of the mold lacks the production numbers located at his right shins. Depending on the individual copy, Optimus Prime is prone to having a number of quality control issues: ranging from two left/right arms and/or legs/feet on the evolution armor, to lacking stickers on the trailer pieces.
A redeco of the Wing Convoy Super Real Figure, Wing Convoy Original Figure (ウイングコンボイ オリジナルフィギュア) was available at JUSCO department stores starting on July 30th 2004. The figure was available with purchase of a Wing Saber figure, and came in a plastic baggie, rather unattractively scotch-taped inside the toy's packaging. A sticker was placed on Wing Saber's packaging to note the promotion.
The Diaclone Powered Convoy figure had several additional features and modes which were mostly excised or left unmentioned for the Transformers release of Ultra Magnus. Principally, Powered Convoy came packaged with "Powered Buggy", who was left out of Magnus's release (see notes below for further details). Omitted from Magnus's instructions is the ability of his chestplate and super robot head to combine to form a small vehicle; the Powered Convoy version of the figure included small rolling wheels on the underside of the chestplate which were removed for Ultra Magnus. Additionally, three additional modes were included in the Diaclone instructions that Hasbro left out: a "preparation base" mode and an "Autobot base" mode were excluded entirely, while the third, a "catapult launcher" mode originally intended and proportioned to accommodate the Diaclone Jet Robo figure that became Starscream, was shown only on the front of his packaging, interacting with Silverbolt. The Japanese release of Ultra Magnus—released as part of the Scramble City sub-line—did include instructions for the preparation base and catapult launcher modes, but replaced the original Autobot base mode with a new configuration.
With Season One of Cyberverse drawn to a close, we have word of a newly-listed Cyberverse DVD currently available for pre-order. Titled ‘Transformers Cyberverse: The Journey’, the anthology consists of 66 minutes of product, which can only be assumed to consist of the first six episodes, given the DVD’s plot synopsis and the title of the collection corresponding to the show’s fourth episode, ‘The Journey’. The DVD itself is listed here by New Zealand based online retailer - Read More
A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.
An undocumented aspect of his transformation is that his gun, which splits in two halves and secrets inside his kibble when transforming (much like Rattrap's) has two handle pegs on opposite sides, so that it can be held either at its far end or halfway along its length. The former position makes the weapon look (charitably) more like his traditional ion blaster—or Ultra Magnus' rifle. Additionally, the gun halves can be plugged together in two different ways, theoretically allowing you to create an infinitely long weapon (or at least one of ridiculous proportions).

Mission Racer Optimus Prime features a pull-back gimmick by using a rubber band: insert the rubber band onto the front and rear post, then place Optimus Prime onto the ramp and pull his trailer backwards, and release the trailer for allowing the truck to zoom forward. The rubber band also has Optimus Prime's name and the Autobot insignia tampographed oh it.
Get ready to turn heads with TRANSFORMERS MIGHTY MUGGS Figures. Call it a moodswing, or call it a moodSPIN, these TRANSFORMERS MIGHTY MUGGS figures feature a push-and-turn mechanism that lets fans change the figure’s facial expression by pushing down on the head. With 3 different expressions and classic character designs, these figures will have fans doing a triple take. Characters include BUMBLEBEE, OPTIMUS PRIME, MEGATRON and more. Each sold separately. Available at most major retailers and on HasbroToyShop.com.

The Happy Meal version of Energon Optimus Prime features a very similar transformation sequence to his larger figure, though his limited articulation means that his shoulder insignias aren't visible in robot mode when his arms are facing forward. His torso is hollow to contain his electronic "Energon Cube" accessory, which generates effects when activated by remote control. This remote is in the form of the Mini-Con jet Wreckage, and can mount on the top of his cab in truck form.


The term Generation 1 is a retronym; the series was simply known as "Transformers" until the release of the Generation 2 series. However, the term has become semi-official, as both Hasbro and Takara have referred to this era as "Generation 1". New characters are still occasionally added to the line, primarily by E-hobby. (Examples: Sunstorm, Hauler, Detritus, and the like.) Large-scale production of new characters in this line ended with the onset of Generation 2. Transformers fans often are very upheld with the G1 community. This has led to controversy among fans who consider G1 to be the only "pure" form of Transformers.

A redeco of of the Cyber Commander toy above, this Prime features grey plastic replacing the original blue, some deco differences on the arms, body & legs. He also features a flame tampograph on the sides of his vehicle front. He comes in an altered packaging that replaces the first version's painted prototype stock photos with CG renders depicting the new deco, and also features a new Hasbro product code number, thus making him officially a separate product rather than a drastic running change variant.


In 2002, 3H secured the official Transformers convention license as well as licenses to produce comic books and start a fan club. Optimus Prime appeared in Transformers Collectors Club comics, a comic released by 3H enterprises. In the comic, he is the same Optimus Prime from the Robots in Disguise continuity, but is taken to the Transformers: Universe reality.

In "Sick Mind", Optimus is infected with the life-threatening Cybonic plague, prompting Arcee and Bumblebee to infiltrate the Nemesis to find a cure for the virus Megatron himself created. As Optimus grows weaker, he learns of Megatron's survival of the space bridge explosion. It was Bumblebee entering Megatron's mind via cortical psychic patch and retrieving the cure that saved Optimus. In the next episode, "Out of His Head", Optimus is, surprisingly, saved by the revived Megatron when he intercepted Starscream's attempted nosedive to kill him. 
×