Alternity Convoy was simultaneously available in both this silver coloration, and a deco based on his traditional appearance termed "Vibrant Red" (see below). The figure was later redecoed to create "Convoy Super Black" (representing not Optimus Prime, but Universe Nemesis Prime), Alternity Ultra Magnus, and Alternity Dai Atlas. It was retooled into Transformers GT GT-R Prime, GT-R Saber, GT-R Megatron and GT-R Maximus.
Transformers: Energon introduced several new concepts to the toy line. Two new sub-groups, the Omnicons and Terrorcons, joined the fray, representing smaller factions of the Autobots and Decepticons respectively. The smaller toys in these sub-groups came with Energon weapons that could be used by the larger Autobots and Decepticons, along with Energon chips that could be fastened to the larger figures to enhance their power. Energon weapons and chips came in a variety of colors of translucent plastic. Many Autobot figures in the line were able to combine with a partner to form a larger robot through the "Powerlinx" process. The Decepticons were designed instead with alternative "attack modes". While no longer the focus of the line, there were several Mini-Con releases in Energon as well.
Early in this new series of encounters with Megatron, Red Alert contacted the Autobots on Earth and asked for Optimus Prime to join then on Velocitron. Ransack and Crumplezone tricked Hot Shot and Dirt Boss into believing that a race between them would determine which of them would be allowed to race Override for the Planet Cup. During the race, Ransack and Crumplezone caused a rockslide that buried Hot Shot. Hot shot was saved when Optimus Prime, Vector Prime, and Landmine arrived, but Optimus was upset that Hot Shot had become involved with the locals. Clocker and Brakedown were eager to help the Autobots. After being unable to obtain the Planet Cup from Override herself, Optimus Prime endorsed Hot Shot's plan to win the cup in a race with the aide of the other Autobots. Ransack and Crumplezone were contacted by Megatron and were told to keep on eye on things. They also decided to enter the race, either to win the cup and cause as much damage as they could to the other racers. Override, Dirt Boss, Ransack, Crumplezone, Optimus Prime, Hot Shot, Red Alert, Landmine, Clocker and Brakedown participated in the qualification round.

A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.
Henkei! Henkei! Transformers Convoy is a redeco of Classics Optimus Prime. He features a significantly altered colour scheme, generally to make the toy more closely resemble his appearance in the Generation One cartoon and the original toyline. His truck mode features less silver paint striping, but compensates by vacuum-metalizing the entire grill/fender area silver chrome. In robot mode all of his previously grey plastic has been replaced with red plastic and mostly painted silver (or in case of the grill & bumper, chromed), along with smaller decos. Since Henkei! toys do not feature a heat-sensitive rubsign, Henkei Convoy has two Autobot sigils tampographed onto his shoulders.
Naturally, Optimus Prime got the biggest of the sets in the first year of Kre-O. The set can be built into a large long-nose tractor-trailer rig with a removable "sleeper" cab that hides a computer station, and a trailer that can carry the set's two motorcycles or open up to carry larger car builds. The robot mode build includes a huge Optimus, based largely on the live-action movie Optimus, though with a head based almost directly on the Classics Voyager Optimus. He is armed with a distressingly plain brick that fires pressure-launched missiles (aka his smokestacks). Most of the leftover parts in robot mode become a "headquarters" which is mostly just a random assemblage of mismatched-color panels and a pair of barricades. Both main builds leave numerous parts unused if you go expressly by the instructions, but hey, it's a building kit, surely you can find someplace to apply most of them.
In light of this news, if Optimus decided to nonetheless head back directly to Autobot headquarters, his squad returned to find their comrades nearly dead from the poison. But with Ratchet’s help, the antidote was quickly distributed, and the Autobots sprung back to life. Now cured, the Autobots discussed their next course of action; they had to prevent the Decepticons from poisoning the nearby water reservoir.
Revenge of the Fallen Legends class Optimus Prime is an all-new, much more accurate mold compared to the 2007 Legends class Prime, having a much greater accuracy in both robot and vehicle mode. In particular, his vehicle mode isn't inexplicably missing one smokestack like the 2007 toy. It should be noted that he was molded in only one paintable plastic color, with red and blue deco patterns decked on it. The top of the truck's bunk (ending up on his back in robot mode) has a slot to combine with Jetfire. For some reason, this isn't mentioned in the instructions, though they're hardly needed.
Another Hasbro release of the MP-10 mold, which is basically a reissue of the 2010 Transformers line's Masterpiece Optimus Prime, but with the Japanese release's ID Number. Surprisingly he is NOT mistransformed on the initial official photography... until secondary stock photos had the vehicle mode slightly mistransformed. Unlike the original, Hasbro version, this version features silver paint on the interior of the trailer. This version also removes the red paint on the die cast hinge piece in his body and replaces it with blue paint. Sadly, this figure doesn't come with the Key to Vector Sigma. Due to compact packaging, the trailer is prone to scuffing.
Cloud Optimus Prime is a redeco of the Classics Voyager Class Optimus Prime mold, transforming into a modern cab-over style truck of made up model, dominated by a large "energy unit" on his roof (actually a wind vane). He features a similar Generation 1-inspired deco to the original toy, but aims for a "cleaner" appearance by omitting many paint details such as stripes on the cab, while the energy unit is colored black with a silver Autobot insignia in homage to Generation 2 Optimus Prime. In robot mode, Prime's energy unit transforms into a large blaster and his smokestacks transform into a smaller laser cannon. Additionally, both weapons can combine together to form a double-barrelled over-shoulder weapon. He was available exclusively at TakaraTomy Mall.
As a 25th anniversary set, Prime includes several new pack-in bonuses: a reprint of the first issue of the original Marvel comic book, a DVD containing all three parts of the animated series pilot "More than Meets the Eye", and three desktop wallpapers, and a battery-powered Autobot symbol that plays transforming sound effects, part of the first version of the Transformers theme song, and three voice clips performed by Peter Cullen: "I am Optimus Prime!", "Autobot, transform and roll out!" and "Megatron must be stopped, no matter the cost." There are some reports that the Autobot symbol could be worn out or damaged during the time of purchase.
Thanks to Hasbro on their official site, which can be accessed by clicking any of the images below, we have news of 2 new members of the Energon Igniters class of figures, along with new images of 3 more! Up first, we have the 2 new reveals: Power Plus Soundwave and Ironhide! Soundwave looks a lot like he did in the movie, with a G1-esque robot mode, and a new van mode that is very Animated-esque, complete with a totally metal image of a jaguar and bird of prey on the side, evoking - Read More

Over twenty-plus years, there have been a bajillion releases of this mold, some identical to the original toy, and some featuring significant variants with notably different paint jobs, color schemes, accessories and other pack-ins. We have striven to list all these variants on this page under their respective series; for a quick-reference list of all variants and releases check here. The cab robot has also been used sparingly to represent different characters; outfitted with different trailers, it has become Generation 1 Ultra Magnus and Pepsi Convoy.


Optimus Prime is also among the characters who appear in the flash game TRANSFORMERS CVBERVERSE Battle Builder Game.[21] Optimus Prime is one of the Autobots featured in Transformers: The Ride at Universal Studios theme parks. In the ride, Optimus fends off against the invading Decepticons at N.E.S.T. headquarters while telling Evac to escape with the AllSpark shard. He battles Megatron throughout the ride until Megatron is killed by Evac. Optimus then congratulates Evac and the riders for protecting the AllSpark.


According to an early Universe-style profile published in The Transformers Comics Magazine, Optimus Prime's "official" nicknames were at one point considered to be "Autobot Commander", "Chief", "Big Boss" and "Roller". As far as it is known, no piece of fiction has ever purposely addressed him using these nicknames, though it's a fair bet he's been called "chief" at least once or twice anyway. And technically part of him is called "Roller" with some frequency.
Part of the sixth wave of the 2010 Transformers toyline, this Optimus Prime is an all-new Deluxe class mold based on the original Generation 2 Laser Optimus Prime toy (see above). Transforming into a racing truck, he has some influences from the live-action movie Optimus Prime, including the more defined flames on his hood, athletic robot mode proportions and a more aggressive-looking translucent orange sword that can be held with both hands for maximum extreme chopitude. Optimus Prime features extensive use of translucent plastic in his arms, head and upper torso for a light-piping effect. Optimus also has a (non-detachable) matrix gimmick in robot mode that is formed by a relief pattern on the inside of the cab's side windows and is visible through the windshield/chest in robot mode. Like the Legends toy, he's part of "Reveal the Shield" and features a rubsign, this time on the roof. He is also very articulated and poseable, even featuring ankles and wrists that are both ball-jointed and hinged.
Released as part of the Energon Igniters Power Plus Series subline, this Optimus Prime is a Scout-sized mold that converts from robot to truck based on his appearance in Age of Extinction in just a few steps. His only articulation is the swiveling upper arms & pivoting arm joints, and his fuel tanks also doubles as a flip-out cannons, activated in vehicle mode. As with all Nitro and Power Plus figures, Optimus also comes with an energon core, which allows his vehicle mode to propel forwards.
Rodimus also appears in the novel Transformers: Retribution as part of the crew of the Ark. Along with Kup and Bumblebee, he suspects that something is amiss with the inhabitants of the planet Aquatron, and takes a small drops ship down into the planet's oceans to investigate. The trio are captured and brainwashed by the Quintessons, who force them to testify against Optimus Prime in a mock trial. Fortunately, they are later returned to normal and return to space aboard the Ark with the rest of the Autobots.

This straight reissue of the original Optimus Prime figure was released in Hasbro's European markets in the early 1990s, at the same time as many other Generation 1 figures were being re-released as "Classics". Oddly, although he shares their golden packaging, Prime is not actually identified as a "Classics" figure anywhere on his box, but is generally considered to be part of the sub-line for simplicity's sake.
In some continuities, though, it’s our lovable pal Bee who takes the leadership reigns. In the animated series Transformers: Robots in Disguise, with Optimus having died at the end of the previous series, Bumblebee starts off as the Autobot leader, but he’s apprehensive about it. And he even takes the leadership mantle in the live-action film series; taking over for Optimus, who leaves the Autobots behind to head into space to search for the Seed at the end of the last movie, Age of Extinction.

We say "intended", because in actuality, the thing appears to have been produced in such huge quantities that it's wound up being made available in loads of other places—it was handed out at San Diego Comic-Con 2011, offered as a free giveaway with any order that included Transformers toys on Hasbro Toy Shop), as a free gift on the cover of the Awesome Autobots Activity Book, and came as a free gift attached to, of all things, issue #240 of the UK children's comic, Doctor Who Adventures (but not the UK's Transformers comic, you'll note!).


Optimus Prime is then informed that Megatron has infected the core of Cybertron with dark energon and is given the task to undo the damage done. After rescuing Omega Supreme, Optimus, Ironhide, and Prowl fight their way to the core, but it's too late. The core informs Optimus that it is far too corrupted. It can repair itself by shutting down, but it will take millions of years. By that time, Cybertron will have to become cold, barren, and uninhabitable. The core gives Optimus a small piece of itself, saying it will still survive as long as the piece does. Optimus accepts the burden and the core relinquishes the Autobot Matrix of Leadership.
Asia Premium Series Optimus Prime Ultimate Edition is an extensive screen-accurate redeco of Jetwing Optimus Prime (with a maskless head from Buster Optimus Prime), this figure features loads of accessories from the Striker & Jetwing figures, and includes brand-new knuckle and battle hooks based on the HFTD Optimus', which can be installed in either hand. The figure lacks the chrome of previous releases, instead opting for silver paint. The pin-striping is also absent, but he does have painted pupils. The figure also features 2-2-1 articulated fingers, which the first Leader Class did not have due to budget cuts. The ion cannon included lacks the black paint application, leaving it completely silver. When purchased from select retailers, this toy will also include a shiny metal number plate and a bonus mini AllSpark cube accessory. His instructions depict a weaponised mode which has some clearance issues, as his Gatling guns are shown attached to the jetwing, which pushes against his arms. His Eliminator Gun and Assault Blaster cannot tab into the Gatling gun tightly either.
An undocumented transformation step includes flipping Optimus Prime's knees out in vehicle mode to form a back bumper with tail lights. Oddly, the toy itself and the package art show Optimus Prime with four fingers on each hand, while he has 5 fingers in the video game. The vehicle mode pictured here is minimally mis-transformed: The exhaust pipes have not been rotated to hide the indentations against the vehicle body. The instructions show the rifle being plugged in by its shorter peg, but the packaging depicts the rifle stored by its grip, which keeps the weapon higher off Prime's body, but is also more secure.
A slight redeco of Takara's Deluxe-size Optimus Prime was released as part of a special set commemorating both the 20th anniversary of Transformers and the 30th anniversary of its progenitor, Microman. Coming with an exclusive metallic redeco of Takara's Kicker, which was based on the Microman body, this Prime featured a chromed grill where the original had painted plastic, and supposedly slightly shinier plastics. Very slightly.
Four million years ago, Cybertron, shaken from its orbit and drifting through space, became threatened when it floated into the path of an asteroid field. Prime led a group of elite Autobot warriors on the Ark, the Autobot starship, on a mission to destroy the asteroids. Although the mission was successful, during the aftermath of this mission, the Ark was attacked by Decepticons hoping to overpower their weakened foes. Intent on keeping the secrets of the Ark from the Decepticons, Prime set the craft on a suicide course, crashing it into the then prehistoric planet Earth.
Although the animated series ended in the U.S. after The Rebirth, Optimus Prime continued to appear in animated sequences of Transformers toy commercials, progressing from Powermaster to Action Master. He even made an appearance as a computer-generated Combat Hero. Many episodes of the series were re-aired to promote Transformers: Generation 2. During these sequences, computer-generated scenes featuring key G1 characters are borrowed from Generation 2 commercials to serve as opening, closing, and commercial bumpers. Optimus Prime is shown in the opening and closing fighting Generation 2's Ramjet.
A minor redeco of Beast Hunters Voyager Class Optimus Prime that has the gray parts cast in a darker plastic shade, lacks the black paint operation for the Star Saber's hilt, changes the color of the side windows' paint operations from yellow to green, adds yellow paint operations for the headlights and lacks the silver paint operations above the front windows.
The Transformers toyline was created from toy molds mostly produced by Japanese company Takara in the toylines Car-Robots (Diaclone) and Micro Change (Microman). Other toy molds from other companies such as Bandai were used as well. In 1984, Hasbro bought the distribution rights to the molds and rebranded them as the Transformers for distribution in North America. They approached Marvel Comics to create a backstory with names and short descriptions for each character, most of which were written by Bob Budiansky.

There is also the release of Optimus Prime as a deluxe sized brown gorilla which is a repaint of the Beast Wars 10th anniversary Optimus Primal toy most likely trying to tie Optimus Prime in some way to the jungle planet Animatros in the Cybertron series. According to his bio, Optimus Prime was temporarily mutated into this form by the Animatros Cyber Planet Key. The colors of this toy are a homage to Transformers: Universe Optimus Primal.
Inspired by a 1985 special limited release of Optimus Prime with bonus Pepsi decals for his trailer in the US market, Pepsi Optimus Prime sports an egregious number of new new Pepsi-themed paint masks and decals, as well as an entirely new trailer unit, specially designed to carry a single 500ml-size bottle (a common size in Japan), three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan).
In 2016, the figure saw re-release with the Combiner Force packaging. Being the tenth use of the sculpt at this point, some instances of mold deterioration have affected the figure, including: the vehicle front's bumper (which affects the space on the head/front bumper transformation), the headlights, and/or the legs, and the hole on the left shoulder is also prone to develop a stress mark due to the right shoulder's slightly "thickened" peg. Although the re-released badge didn't seem to unlock Optimus Prime after it was scanned, a later update to the game amended this.

Many Transformers come with tech specs (short for technical specifications) printed on the back of the box that they are sold in. The owner of the new Transformer is encouraged to cut out the tech specs and save it. This card has information on the Transformer, and will usually include the character's name, picture, indication of allegiance (Autobot, Decepticon or other), function, a quote, a description of the character, and numerical values of the character's various attributes. Although only the numbers can be truly deemed "technical specifications", the entire card is usually referred to as the Transformer's tech specs. Each specification is rated by a value from 1 to 10, 1 being the lowest, and 10 being the highest.
In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.
×