A Japan-exclusive release of the Voyager Class figure with a trailer and a different Mech Tech weapon. The trailer opens like the original G1 toy and fits up to two Deluxe Class vehicles of the same toy line. In addition, the trailer can hold over 20 Mech Tech weapons. The supplied Mech Tech weapon is a blaster with a retractable blade designed similarly to Optimus' forearm swords.[123]

Partially constructed of die-cast metal, this small three inch figurine of Optimus Prime has a CGI-accurate sculpt compared to the larger toys, owing to the fact it does not need to transform at all. He is sculpted with his Ion Blaster in his right fist, and is articulated at the neck, shoulders and waist. He comes with a small movie-style Autobot sigil display stand.

Oh, also, I should add that I would like to see if this trend is the same for specific themes, or just over all themes. Although I would guess that the individual themes would show the same general trend you discuss here, one reason individuals might believe in the “price increase fallacy” might be because of the individual themes they support. But again, I think that if you do this, you will find the themes fit the trend as well. If you are looking to go into the numbers more, this might be an interesting area to investigate.


If the Autobots went along with Prowl’s strategy, the resulting heat from the explosion caused the Autobots’ circuits to overheat, rendering them unconscious. Upon reawakening, the Autobots found themselves captives of Megatron, who informed them that their fellow Autobots would soon perish, and that the humans would be conquered by the Decepticons shortly after.
Optimus Prime appears near the end of the Decepticon Campaign. Sam and Mikaela inform Optimus that all the Autobots were defeated by the Decepticons. Optimus proclaims that they sacrificed their lives to protect the Allspark, and their sacrifice will not be in vain. Leaving Sam and Mikaela in a safe place, Optimus faces Megatron, but is defeated. Weakened and damaged, Optimus crawls to reach the Allspark. However, Megatron attacks Optimus with his chain-flail, killing him.
Optimus Prime appears as leader of the Autobot forces in the Transformers: Timelines story "Shattered Glass" by Fun Publications. When Cliffjumper, the Generation 1 character from a parallel universe, is seemingly discovered alive, Optimus welcomes his old friend back to the Autobot fold. After learning that Clffjumper is not the evil Autobot he remembers, he shoots Cliffjumper and leaves him to fend for himself in the Rad Zone. Optimus plans to launch his new warship, the Ark, to conquer Earth, but Cliffjumper aids Megatron's heroic Decepticon forces in a successful attack on the Ark's launch platform.[175]
After step 5, the instructions did not mention that you should fold back the shoulder panels to form the sleeper part until the 11th step. Care must be taken while transforming the legs: the small peg located on the lower leg can be snapped off due to the peg being slightly thick to accommodate with the hole. Also, take note that Optimus Prime cannot wield 5mm weapons with longer posts, as the way that his pinky finger is molded prevents the post from pegging down through his hands. Also, take note that the legs' sculpted small rectangle peg (the one that locks the robot mode legs in place) is prone to warping if care is not taken during transformation.
Hot Rod only appeared three more times: once when he gave the Matrix to a Quintesson-controlled Optimus Prime. When he lost the Matrix, Rodimus was forced to face down his fears once and for all when the Decepticons began a series of attacks on Japan. Overwhelmed by the different responsibilities and directions he was being pulled in, Rodimus went joyriding and was attacked by the Stunticons Dead End and Wildrider, losing the Matrix in the ensuing crash, which was acquired by the Scourge, one of Galvatron's minions, the Decepticons' tracker and leader of the Sweeps. While Rodimus became Hot Rod again – and was not eager to change back – Scourge was warped and enhanced by the Matrix and led another attack on Japan. Counseled by a martial arts master on giri – the burden hardest to bear – Rodimus realized that the Matrix was his burden, and that he had been chosen to bear it; battling Scourge, he recovered the Matrix and resumed his role as leader, and finally when Optimus Prime was resurrected, Rodimus Prime was able to return to being Hot Rod for good. In all three occasions, his return to Hot Rod took place because he lost or passed the Matrix to someone else.
Prime got his own rap segment. He was seen in his "Combat" toy body, waiting for Megatron as he attacked a human subdivision. Prime converted to robot form, blew up Megatron's weapon at point blank range, and slugged it out with him. Apparently emerging victorious, he was next shown sitting next to an identical truck, which kid mistook for the real thing. The real Prime then transformed and picked up the kid, inspecting the human with his cold, lifeless, flashing red optics. Combat Heroes commercial
The internet can be blamed for the size and scope of the secondary LEGO market. On the website, BrickLink, you can find almost any set that LEGO has ever produced. In addition, the site keeps records of trends in the market and value of individual pieces. This site is invaluable to a LEGO collector and has given many the ability to grow their collections. Before the advent of this site and sites like eBay, collecting LEGO required going to garage sales. There are now whole sites dedicated to buying LEGO as an investment, but that is a topic for another article.
The Heroes of Cybertron PVC figurine line is an adaptation by Hasbro of Takara's own Super Figure Collection line. The main differences between the two lines is that Hasbro cast Autobot and Decepticon figures in clear blue or clear red PVC respectively, then completely painted the figurines. This allowed the eyes to 'glow' when placed in front of the light source.
One of the taglines of the Transformers universe is “more than meets the eye.” It’s meant to suggest, of course, that these robots are not just robots; they can turn into vehicles and boomboxes and dinosaurs. But some of the characters themselves tend to be more than meets the eye. In fact, they can become other Transformers. Megatron becomes Galvatron, Orion Pax becomes Optimus Prime, and Bumblebee becomes Goldbug.
Star Convoy was reissued by Takara in 2005, with some notable alterations to his deco: his white plastic was replaced with metallic silver, and the yellow star on his chest was chromed golden. Star Convoy himself retained some of his original decals but most notably his "simulated head lights" and "wind shield panels" were stamp graphed on him, similarly, Hot Rod's were replaced with the same stamp graphing applications. Additionally, where the original toy had been packaged in robot mode in a tall box decorated with the standard Japanese package art of the time, the reissue was packaged in vehicle mode, in a long, wide box more reminiscent of the original Generation 1 toys.
This new smaller mold of Optimus Prime features a similar transformation to the original toy. Unlike most transformable figures in this line, Optimus completely lacks 5mm fist holes. Compared to the finalized toy, the product photo on the back of the box has a number of deco differences, most notably silver thighs and white accents above the front windows in addition to those below. The same box photo and the more deco-accurate stock photo (right) also neglect to fold out his fists, which is the only other step in his two-step transformation.
Fire Blast Optimus Prime is a redeco of the previously released Power Hook Optimus Prime fast action battler. The color scheme is loosely based upon Generation One Rodimus Prime, explained rather oddly in the card bio as being the camouflage Optimus took while hunting Decepticons on Mars post-movie. ...Because there are so many longnose cabs driving around Mars. Yeah.
The earliest version, as shown in the first patent application for the toy, was to have the Prime cab be a triplechanger, turning from truck cab to jet or robot[3]. The nosecone of the jet and robot legs were released by the Powermaster lock in the same fashion as the legs in the final version. Optimus would have had winged arms in non-super robot mode. The super robot mode's head was also integrated into the trailer's hitch... and lacked a faceplate.
This mold was redecoed by Takara in 2000 as Car Robots Black Convoy. The following year, it was released by Hasbro as Black Convoy's 2001 Robots in Disguise franchise counterpart, Scourge, with retooled discs that lacked the Autobot insignia. Following this, the next use of the mold was planned to be Universe Toxitron, which ended up being canceled. The modified tooling was also used when Laser Prime was reissued by Takara in 2006 with a modified deco (see below), and for the e-Hobby exclusive Laser Ultra Magnus that accompanied the reissue's release. In 2015, Platinum Edition Year of the Goat Optimus Prime, another repaint version, comes with partially transparent plastic torso.

There are two versions of the voice changer helmet with two different pre-recorded voices. An earlier release features a voice similar to Garry Chalk, while the later release features the voice of Peter Cullen. The latter version has modified packaging under the 'Try Me!' blurb, stating it has 'Real Movie Voice!', though the updated version has also appeared in the original packaging without the 'Real Movie Voice!' notice.


Optimus Prime was one of three Transformers characters immortalized in Gummy Candy form by the Frankford Candy & Chocolate Company. Released during the time when Classics had just replaced Cybertron on the toy shelves, Prime's candy depicts him in his Cybertron body, alongside Generation 1 Bumblebee and a kooky Cybertron/Classics Megatron cross-breed. The candies were all sold individually in blister bubbles.

Long before the internet came along and ruined life as we knew it, Children amused themselves with the most primitive of toys. At the top of the food chain was the yo-yo. Believed to date back to around 500 B.C. in Greece, and even believed to have been used as a crude weapon in the Philippines, the yo-yo (pronounced yo-yo) made a roaring comeback in the 1920s as a toy, and to a lesser extent as a weapon.


Marissa and Prime are now on the run from the EDC and are also frequently attacked by the mysterious "Legion" Transformers. When faced with such foes, Marissa unleashes her "Kiss Player" ability by kissing Prime, fusing with him once again, increasing his power so that he can best their opponents. Prime is armed with the Surf Blade, a weapon formed out of Marissa's surfboard, wielded expertly thanks to the knife skills Marissa passes on to him when they merge.[18]
Part of the new Adventure Shokugan series, this Optimus Prime is a transformable snap-fit kit molded in red, blue, and yellow plastic with detailing from stickers. The kit's transformation engineering is borrowed from the Warrior class figure. But unlike the said toy, the Axe must be pegged onto Prime's legs before transforming, and his shoulders are molded on his front truck halves/shoulders not being flipped down. Also, the stickers are used to cover the molded cavity on the front shoulders. As with Fixit & Underbite, Optimus Prime is fully transformable.

A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.
A larger version of Prime, with Advanced Automorph technology and a more complex transformation procedure. Has two sets of electronic sounds and lights that activate when the head pops up or when you press a button on the roof (in truck mode), and a single projectile weapon that can swing over the toy's right hand. Unlike Megatron (whose head is fixed) and Brawl (whose head is connected with a ball joint), Prime's head is limited to side movement due to the circuitry on his LED eyes. This figure has a folding cannon and a firing missile.[76] With this figure standing nine inches tall and Optimus being 28 feet (336 inches) tall, the toy is about 1/37 scale.
Oddly, he had a different plate in those films when in car mode: 900 STRA. In Dark of the Moon, they finally decided to keep his robot and car mode plates consistent. In robot mode in the Dark of the Moon and Revenge of the Fallen video games, he wears 5BBM2. 5LKZ213 was seen in some set photos of robot mode for the first film. Various models for promotional exhibits have featured KDM 0814, FXPERTS, and, of course, BUMBLBE.
Voyager Optimus Prime is a redeco of the toy from the first movie's toyline. Like several redecos or retools of 2007 movie toys, there has been some effort to make this release noticeably different from the previous releases, though the toy ends up looking less accurate to the actual movie appearance than those previous releases. Optimus Prime has a sort of faded Autobot logo on the side of the truck's bunk, and kanji (Chinese characters) on the roof (ending up on his knee in robot mode.) The word "上海将军" means "Shanghai General", while "大将" means "Grand general".
While I don’t think anyone should complain about the price of Lego, I have to say that I don’t think our nostalgia for the 80s/90s is at all misplaced -it really was a better time to be a yuppy/young parent. There were more and better jobs available with better pay, benefits, and less required prerequisites. Young adults today have to work a lot harder to maintain the same lifestyle our parents had..of course there are exceptions, if you are especially gifted you can still make it in today’s world.

For some reason: unlike the stock photos (pictured from the right), This Custom Kreon had a slight QC issue to the opaque and transparent helmets: One had two sides sculpted, while the other one has the small flat square sculpt (similar to the details on Hound's helmet) on the right side. Several samples had two different "variants": One with the perfect transparent helmet & a differently-sculpted opaque helmet, while the other one has the opposite. However: later releases fixes the problem by a running change.


This miniature model kit of Energon Optimus Prime comes unassembled and unpainted, moulded mainly from white, red and black plastic and featuring some stickers for essential detail. Standing at around 4.5 inches tall, he comes with his Prime Force drones and can combine with them in the usual ways; while Fire-1, Gyro-2 and Digger-3 are moulded in their normal colours, Submarine-4 is stuck being black, and like every other non-color-molded, non-stickered detail on the kit, must be painted by the buyer. Prime's transformation involves removing his feet and head (an alternate Super Mode head is included, as his antenna does not transform into a helmet), and he does not come with a trailer for the Prime Force, but his gun can shoot small orange plastic BBs via a pressure-launching mechanism, and he comes with a small gold-chromed Energon star that fits onto his left shoulder. The kit also comes with "Episode 1" of the "Optimus Prime VS Scourge" mini-comic, printed on the back of the instructions.
The Transformers Energon figure pen is based on Optimus Prime in his standard Energon body. About the size of a scout class toy, he transforms from truck mode to robot mode almost identically to his mainline toys, apart from the fact that his feet contain the pen and cannot bend. It's really hard to write with, and almost impossible to pose, even though it has full arm articulation. Amusingly, this figure can position itself to transform into his super robot mode (by flipping his helmet on, opening his chest and flipping his hands in), but because there are no versions of the Prime Force drones in this scale, it's impossible to complete him.
Categories: Art FeatherAstronBeelzeboss StudioBTS ToysCHMSDaCa ToysDMY StudiosDr. WuDream FactoryFansProjectFansToysGeneration ToyHeadrobotsHeerotoysmakerIGearImpossible ToysJunkion BlacksmithJustIToysKaziKOLDMaiden JapanMaketoysMastermind CreationsMasterShooter CollectiblesMech IDeasMGSPerfect EffectPlanet XPlay With This TooRenderformReprolabelsToyworldTransformersTFC ToysWarbotronX-TransbotsXovergenYom-GZenith Forge
Produced to coincide with the 20th anniversary of The Transformers: The Movie and its release on DVD by Sony, this edition of Prime is a redeco of his 20th Anniversary figure. It replaces the original's metallic paint with flatter colors and does away with any and all vacuum-metalized plastic, as well as altering several other small details across the body, like the color of the lights on his feet and chest.
As the Universe War began, Optimus Primal was shown a myriad of Transformers from across all timelines that he could choose to recruit into his Children of Primus in the battle against the Minions of Unicron. One such possibility was a Transformer who was either Thunder Clash or Optimus Prime, but, regardless, Primal chose Depth Charge and Rhinox instead. Homecoming
The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[19] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original transformers toy line.
LEGO® sets are not cheap toys. They are made to the highest standards and have the price to go along with it.  However, in the past couple decades it seems that the price of LEGO sets has become outrageous. New sets can sell for up to $500 retail and old sets can sell for twice that in a secondary market. This is a children’s toy, right? There is no way LEGO sets have always been this expensive; it is just molded plastic. Let’s take a look at the history of LEGO pricing and try to figure out what is going on.
But it is scary to think that there is a strong possibility they will look at redoing almost every Masterpiece now if this is a success. The MP+ releases have me feeling tired. I don’t have to get them but I have a completionist mentality. But a redo... I’m almost ready to check out of MP completely. I waited so long to get six seekers done pretty well to me. Now there’s a chance they will redo them. And soundwave. I sure hope I’m just being a worry wart.
The Transformers toy-line is typically divided into two main factions: the heroic Autobots and their opponents, the evil Decepticons (traditionally known in Japan as the Cybertrons and Destrons, respectively, although more recent releases often using the English terms). Transformers toys are sold at a number of price points, and various Transformers series utilize unique play features.
Hero Optimus Prime was the first new-mold Optimus Prime toy in the Generation 2 line. He transforms into a Kenworth truck of unknown model with a flatbed trailer. The truck and trailer form his robot mode, but cannot disconnect. His primary gimmick is an air-powered missile launcher that uses an air bellows attached by hose to launch his large, hollow, soft-rubber-tipped missiles. The bellows and missiles attach to his back in robot mode. His rifle plugs into the launcher's main body in truck mode.

Not long after his resurrection, Optimus was alerted by Monitorus to an attack on Tau-Ursa. Optimus's impending speech was interrupted by a Decepticon attack led by Sixshot. Prime soon discovered that the attack was a diversion, while Galvatron tried out his Nullification Cannon on Cybertron's Energon supplies. Optimus rushed to the Energon plant, but, after clouting Slugslinger so hard that the Decepticon was left dangling over a precipice, Prime's morals forced him to rescue the Decepticon instead of stopping Galvatron from getting away.
This Voyager-sized Optimus Prime is an all new mold (with a similar transformation scheme to Age of Extinction Voyager Class Galvatron, notably the shoulders, rooftop backpack, and the leg/wheels combo) based on his Leader Class figure. He features a similar but different transformation scheme, which results in a somewhat clean robot mode, although most of his vehicle kibble hangs on his back. He also features the sword & the shield based on his final design in the movie, albeit the sword being painted similarly to the Armor Knight Optimus Prime's sword. His Sword can store underneath his Vehicle mode or his robot mode backpack, while the shield can be stored on the truck's fifth wheel hitch, which can also tow the trailer included from the Japanese exclusive Mechtech Voyager. Although the pectoral armor can be slightly pushed up a little bit further, the pieces have to actually stop at where the rectangular pegholes are located.
One detail not reflected in most of Hasbro's photos is that the sun visors above Prime's windows are mounted on ball joints and can be positioned like they are in his CG design. The hood halves on his arms can slide up on their hinges and the blue panels at the back of Prime's lower legs can be pulled out slightly as well for further screen accuracy.
1. Color diversity: Back in the 80s, most sets were comprised of a few basic colors; red, blue, yellow, white, gray, and black. It was much easier to acquire a “critical mass” of pieces in each color to start building one’s own creations in coherent color schemes. Space, Town, Castle sets all had the same basic colors. Today Lego uses a much wider array of colors in their sets. While this adds a lot of variety and visual appeal to today’s sets, this means that one has to buy a much larger number of sets (or scour bricklink) to get achieve a workable critical mass of pieces in each color. After buying some of the modern sets, I end up with a few dark-blue or lime-green pieces that I don’t really have enough to much with other than use as accent colors. They end up in my misc color bin in the event I decide to build the set they originally came with or sell them off on bricklink.

Commander class figures all come with translucent weaponry, and feature some amount of translucent plastic in their bodies (blue for Autobots, but a variety of colors for Decepticons), a feature designed around interacting with the line's vehicles (see below). Each vehicle is equipped with an "Energon Booster", a light-up accessory that can plug into the Commanders' weapons or into the posts and ports on the figures' backs to illuminate them with "glowing energon power".
Released as part of The blindpacked EZ Collection Real by TakaraTomy's "TakaraTomy A.R.T.S", this Optimus Prime is an extensive redeco of the Revenge of the Fallen Legends Class figure, sharing the same paint mask with the Battle Damaged figure sans the weathering. Like all land-based vehicles in this line, He also features an extra paint applications on the wheels rims. This redeco also uses the slightly small fuel tank/elbow tabs.

Hasbro has had a bit of a strange relationship with Bumblebee. In the early days (we’re talking mid-’80s) he was hugely popular, both on the TV show and as a toy, and Hasbro was sure to capitalize on that. As a result, there were more different Bumblebee toys during that time and into the early ‘90s than for any other Transformer. Of course, the alternate Goldbug version helped boost the number of toys they could make.
The figure was re-released in Hasbro's Asian markets in 2012, with no known changes to the figure itself but several modifications to the packaging that makes it easy to tell the two releases apart: The flap containing the package art is omitted entirely, the "Commemorative Series II" label is missing, the age recommendation and safety warning labels, the "Changes from double tractor trailer to battle station to super robot!" call-out and the name of the toy have all been shuffled around (with the words "battle" and "super" being omitted in the process), and most notably, the toy is no longer named "Powermaster Optimus Prime with Apex Armor", but simply "Optimus Prime", with Apex Bomber's existence no longer acknowledged anywhere on the packaging.

A single-packed version of the battle damaged Voyager Optimus Prime toy from the Sam's Club exclusive three-pack. Although the assortment number and the general packaging style seemed to indicate that this might be a Best Buy exclusive, this has been confirmed to be an "international market" exclusive. It has been released in Asia, but will presumably not be available in the USA outside the Sam's Club three-pack.
French die-cast model producers Majorette teamed with Kabaya to produce the Transformers Mini Car Collection, a line of Armada-themed die-cast vehicles, all of which were redecos of pre-existing Majorette toys. Prime was a redeco of Majorette toy #256—a long-nosed tow truck—in his traditional red and blue, now bearing the Autobot insignia, the Micron Legend logo, and an image of the Autobot leader on its hood. The toy came with a pack of gum.
One of the taglines of the Transformers universe is “more than meets the eye.” It’s meant to suggest, of course, that these robots are not just robots; they can turn into vehicles and boomboxes and dinosaurs. But some of the characters themselves tend to be more than meets the eye. In fact, they can become other Transformers. Megatron becomes Galvatron, Orion Pax becomes Optimus Prime, and Bumblebee becomes Goldbug.
Star Convoy was reissued by Takara in 2005, with some notable alterations to his deco: his white plastic was replaced with metallic silver, and the yellow star on his chest was chromed golden. Star Convoy himself retained some of his original decals but most notably his "simulated head lights" and "wind shield panels" were stamp graphed on him, similarly, Hot Rod's were replaced with the same stamp graphing applications. Additionally, where the original toy had been packaged in robot mode in a tall box decorated with the standard Japanese package art of the time, the reissue was packaged in vehicle mode, in a long, wide box more reminiscent of the original Generation 1 toys.
×