"Special Edition" Optimus Prime is a redeco of the Classics multi-pack toy, featuring some minor paint detail changes, bluer translucent plastic, darker and cooler gray plastic, and darker metallic flake red and blue plastic, with his (previously black-only) rifle body most notably now being cast in both blue and black plastic. He came in special "book box" style packaging with black-and-white boxart, and was only available at retail in Australian and Asian markets. North American customers could later buy him via Hasbro Toy Shop.
After many battles on Earth, Optimus died by standing purposefully in the path of the Hydra-Cannon built by Megatron from the three Mini-Con weapons, the Star Saber, the Skyboom Shield, and the Requiem Blaster. He managed to partially reflect the beam, damaging the Hydra-Cannon. It was the Mini-Cons themselves, however, who resurrected him, entering the Matrix and reconstructing a new body for him. Subsequently, Unicron forced Optimus to face the dark part of his soul and that, on some level, he enjoyed the thrill of combat. Following Unicron's defeat, Optimus's denial was sorely tested as Galvatron, an upgraded Megatron, forced him into one final furious battle. The battle ended when Starscream sacrificed himself to end the circle of hate that powered Unicron. Floating through space, Optimus found the Matrix, but said he did not deserve it. Before beginning the battle with Galvatron, he was upgraded by the minicons. His red torso turned black and he was able to battle Galvatron one on one.
After the Combiner Wars, Optimus watched the reconstruction efforts. Not wanting to overstay his welcome and preferring to leave Cybertron's leadership in its existing hands, he bid farewell to the Mistress of Flame and Windblade and departed for parts unknown. Aftermath and Rebirth On the way, he received a vision of future events from the Matrix and headed back towards Metroplex City. There, he met up with Megatron and told him of his vision, believing that the Combiner Wars and Trypticon's attack were signs of a greater threat, one that would lead to their ultimate destruction. Megatron laughed off his concerns, and the two parted ways. The Fight Begins
Released by TakaraTomy as part of a 2010 promotion honoring the "future era" of the original cartoon (which was set in 2010 in Japanese continuity, you see!), this exceptionally morbid re-release of the Masterpiece Convoy figure recolors the Autobot leader in blacks and greys, representing his dead body from The Transformers: The Movie—but don't worry, kids, it's actually a "sleep mode", according to the figure's name! Limited to 2010 pieces in Japan (see what they did there?), it comes with all its customary accessories, including the Perfect Edition trailer, redecoed where appropriate: the trailer itself has become translucent, its energon-axe is now transparent grey, and Megatron, in another movie homage, is rendered in translucent purple, evoking the scene depicting his transformation into Galvatron. The figure was also released in other parts of Asia as a limited edition of 2010 as well, combined with the Japanese edition for 4020 total. The Japanese version denotes "Serial Number in Japan: ####/2010" on its bio card with the number out of 2010, while the Asian version denotes "C1 - ####/2010" with the number out of 2010 on its bio card.
After having spent an extended period of time lost on Quintessa, Optimus was returned to Cybertron by the Turbomasters during their efforts to retrieve the similarly lost Flash, who he had been drawn into Perceptor's Dimensional Interface Assembly. The Age of Wrath Pt.5 Though badly damaged, Optimus led an insurrection against the then Megatron-controlled Cybertron, and successfully overthrew his enemy from power, all the while thwarting a Quintesson invasion. The Age of Wrath Pt.6
It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
What makes LEGO sets seem more expensive now is that the effective piece count seems lower. I remember that in the 80s, each set was full of bricks that were not overtly specialized only to that set. So they were useful for more things. Now the sets usually come with less bricks and plates (things that could be useful everywhere) and bring more things like minifigure accessories, flick fire missiles and other things that are not that useful. Although I think that everything was far worse in the late 1990s/Early 2000s than it is now.
Like the original Warrior Class Optimus Prime, the figure features an undocumented feature: His axe can be stored on his vehicle mode trailer. Additional features include storing the axe onto either of his leg hooks, combining the launcher with either of the swords at their hilt, and storing the launcher underneath the vehicle. In a neat bit of engineering, he can fully transform with his swords attached.
The centerpiece of the power-up robot mode is Prime's gigantic Ultimax Super Cannon, an electronic light-and-sound weapon the size and mass of a Deluxe figure. The whole cannon attaches to a special socket slightly behind Prime's shoulders, can store on the back or flip over to be gripped in both fists in armor mode, or stored upside-down underneath the trailer in truck mode. When pointed forward, the cannon has a larger helmet styled after Prime's own with a large translucent face shield featuring a painted targeting system. The weapon has three electronic modes: each of two small buttons plays its own weapon-firing noise and flashes one set of lights, while the large pull-switch in the cannon's center plays the sounds of a powerful barrage, flashing both sets of lights and (every third time) finishing off with the declaration "I am Optimus Prime". The Ultimax Super Cannon also has two of its own 5mm ports for even more MechTech firepower. When mounted on his back, the Cannon has two hook-like sections that securely lock into the "backpack", allowing the Ultimax weapon to serve as a handle for Optimus' imaginary "flight" operations.
Never one to give up, Optimus managed to down Devastator in return, only to find himself at Megatron's mercy. The Decepticon leader pointed out to him the humans' self-obsessed behavior in the face of the devastation, suggesting the fleshlings were worthless, and the Autobots should join the Decepticons in wiping them out. Prime Directive #5 The heroic actions of a team of firefighters and other humans proved to Optimus that the humans were worth saving, and the Autobots delivered a smackdown on the Decepticons. The fight was interrupted by the news that a nuclear missile was inbound, and despite Prime's protests, Superion sacrificed himself intercepting it. Prime recovered from the shock wave to find that the Decepticons had fled. He appealed to Grimlock to return to the Autobot ranks, an offer turned down by the Dinobot. Prime Directive #6
I am so not in for this, it will still look arguably better then MP-01. But the true MP Optimus Prime is MP-10. This new one is all about animation, and the backpack is pretty huge. MP-10 has a built in part for weapon storage... it was not actually needed. Idk about this new direction. I’ve been pretty much exclusively 3rd party and older MP’s. This new style of lavishly G1 animation is not for me. MP-10 was the standard and the perfect blend. For whatever reason Takara is/has been pushing a new direction that a good majority don’t really want to go in on. See Transformers 3rd party market. If there wasn’t a itch that needed scratching it wouldn’t exist.
This set's Optimusses are based on the Prime incarnation. The larger Optimus is a smaller, simpler build than the first big kit, and makes use of ball-and-socket parts for increased articulation. It also carries a spring-loaded missile launcher. The Optimus Kreon's tampographs are based directly on the Prime cartoon model, though he carries an energon axe akin to the one from the War for Cybertron games. He also has a clear-blue extra "energon" torso piece.
Legends class Optimus Prime is an extremely simplified toy of the extremely complex movie design. As such, he features numerous unavoidable inaccuracies, such as not transforming or even looking very much like the original design or the larger toy versions in robot mode. However, proportionally Legends class Optimus Prime is not far off from the real truck and the Leader class toy's vehicle mode, aside from missing a smokestack on the driver's side. He is articulated at the shoulders and upper legs via ball joints. He can also hold small weapons, such as Cyberverse.
Besides finding Megatron for the Transformers Movieverse, Mr. Sheppard was known for his many appearances across the Star Trek series and films. Additionally, he was well-known for his work as Blank Reg in the Babylon 5 series, and many other appearances in series like Dr. Who and more over his long-time career. You can read the full article about him via TV Guide.com.
This figure was designed by Yūki Ōshima and produced by KT Figure Collection. The figure is actually a mini bust of Optimus Prime, which includes the head and the upper body without arms. The chest design comes with translucent blue windows and a grill on the midsection. There is also a button in the back. Pushing the button will open the chest and cause the Matrix to emerge, similar to the scene in The Transformers: The Movie.
One detail not reflected in most of Hasbro's photos is that the sun visors above Prime's windows are mounted on ball joints and can be positioned like they are in his CG design. The hood halves on his arms can slide up on their hinges and the blue panels at the back of Prime's lower legs can be pulled out slightly as well for further screen accuracy.
Exclusive to Walmart, this Deluxe Class Optimus Prime is an all-new mold, close in scale to Voyager Class Megatron. He has a high range of motion, with ball jointed shoulders and hips, swivels at the neck, knees, and feet, and double swivels in the elbows. As a result of the transformation process, he can also rotate at the waist, though this is hindered considerably by his "backpack" kibble. This can be remedied by pointing the truck nose downward, as it is in the packaging. Optimus Prime also features the spring loaded "Automorph" feature in his head, if the truck kibble pushes the small grey switch from his back before splitting the chest into half.
Menasor cut off Prime's escape and handed him the Reflector trio, who confronted Prime with a hologram of Serpent O.R. The new Decepticon leader carried Megatron's memories and information downloaded from Soundwave, from which he learned of the Matrix of Leadership. Serpent O.R. offered Optimus a trade: hostages and peace if he handed over the Matrix. Optimus agreed.
Now I'm 30, so I don't know exactly what transformer toys you grew up with, but I had a bunch of the "Beast Wars" toys. Which with my nostalgia glasses on seemed much more detailed in my memory than what these new Transformers toys look like they are advertising on their website. However searching for a picture of my Optimus Primal toy... it isn't quite as detailed as I remembered. So my point is that it is probably a bit of nostalgia making you think yours were so much better than what they have now.
China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More