The G.I. Joe line of toys has always been the definition of "action figures," featuring moving joints, changeable outfits and ripped man-bodies underneath. If this all sounds a bit gay on paper than it should be noted that G.I. Joe figures are all armed with a vast array of weaponry. Also, if you ever suggest that Snake Eyes might be gay, make no mistake, you will be dead before you even see the movement in the darkness.
Optimus Prime features a MechTech Blaster that can convert into an Energon Battle Axe reminiscent of the Generation 1 character's iconic weapon, though the weapon cannot be locked in battle axe mode. There is also a pair of C joint rods on the underside of both forearms. His MechTech blaster can plug into the port on each of his arms or be held in either hand in robot mode, or plug into one of two holes on his truck roof/robot shoulders.
A very limited number of Gold Masterpiece Convoy figures were given away in a Lucky Draw contest in Japan. The figure uses the same design as Masterpiece Convoy, but every piece, including the windows and weapons, is cast in a gold color, reminiscent of his electrum coating from the episode The Golden Lagoon. The only exception is the tires, which remain black rubber. It comes packaged in the usual Masterpiece Convoy box, with the only telltale sign being the gold lettering in the "Master Piece" label. It's not clear how many were made, but it is thought to be no more than 10 or 20.[1]
Part of the Legend Commander Collection sold at Transformers Expo, Convoy is a redeco of Robotmasters G1 Convoy. While most of the paint masks are identical to the original mold, other changes includes replacing the transparent parts into clear blue plastic, and the panel-lining on the grill is stripped off. Unlike the first toy, he does not include a pair of swappable 3mm fists, his missile launcher, or his Calamity Defenser weapon.

Available exclusively at Toys "R" Us, Rodimus transforms into a futuristic car that is a homage to the vehicle mode of Generation 1 Hot Rod. A panel on the car's hood, which is also the figure's chest, can be flipped to either show an engine block or the figure's Autobot insignia. The figure comes with an Energy Bow, capable of firing two missiles. His bow can also be tabbed to the roof of his car mode or snapped on his hand. The tabs that secure his bow in vehicle mode are 5mm wide, making it usable by other figures as well. His legs are normally bent for the underside of his car mode but can be locked straight during transformation.
Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[38] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[39]
Categories: Art FeatherAstronBeelzeboss StudioBTS ToysCHMSDaCa ToysDMY StudiosDr. WuDream FactoryFansProjectFansToysGeneration ToyHeadrobotsHeerotoysmakerIGearImpossible ToysJunkion BlacksmithJustIToysKaziKOLDMaiden JapanMaketoysMastermind CreationsMasterShooter CollectiblesMech IDeasMGSPerfect EffectPlanet XPlay With This TooRenderformReprolabelsToyworldTransformersTFC ToysWarbotronX-TransbotsXovergenYom-GZenith Forge
Optimus Prime is also among the characters who appear in the flash game TRANSFORMERS CVBERVERSE Battle Builder Game.[21] Optimus Prime is one of the Autobots featured in Transformers: The Ride at Universal Studios theme parks. In the ride, Optimus fends off against the invading Decepticons at N.E.S.T. headquarters while telling Evac to escape with the AllSpark shard. He battles Megatron throughout the ride until Megatron is killed by Evac. Optimus then congratulates Evac and the riders for protecting the AllSpark.
Oh, also, I should add that I would like to see if this trend is the same for specific themes, or just over all themes. Although I would guess that the individual themes would show the same general trend you discuss here, one reason individuals might believe in the “price increase fallacy” might be because of the individual themes they support. But again, I think that if you do this, you will find the themes fit the trend as well. If you are looking to go into the numbers more, this might be an interesting area to investigate.
The earliest releases of Energon Optimus Prime have no ridges on the inside of the chest windows and a different head sculpt featuring an Optimus Primal-style mouth-slit in Prime's mouthplate. This was soon replaced with a full mouthplate, and it was this version of the toy which appeared in the Energon cartoon and was released by Takara. Other changes made to Takara's version of the toy involved a chromed front grill, more vibrant plastic colors on Digger-3 and Submarine-4, a darker blue plastic on Prime himself, and more intricate paint operations. Takara's release lacks the electronic sound effects seen in Hasbro's version, which were commonly gutted for the Japanese releases of any Autobot toys who had them, though Prime retains his light-up chest.

In the Transformers: Prime series, he can form bladed weapons or blasters from his hands. He has telescopic vision and turns into a long-nose semi-trailer truck. Before the Great War, Optimus Prime was originally known as Orion Pax; a young data clerk who worked in Iacon, under the wing of Alpha Trion. Orion was chosen by the High Council and became "Optimus Prime," upon being entrusted with the Matrix of Leadership by Primus himself. Years of war against his old friend/rival, Megatron, have brought Optimus and his team to Earth. After Optimus and his team first met humans on Earth, they allied with them. During their fight against the Decepticons on the planet, Optimus and the other Autobots were subject to many disadvantages, managing to pull through every time in their various mission to stop Megatron's exploitations of Earth's vast Energon resources. When Unicorn threaten Earth, Optimus Prime had no choice but to surrendered the Matrix of Leadership in order to stop Unicorn. Due to loss of the Matrix of Leadership Optimus not only lost the collective wisdom of the Primes he also lost his memory, reverted to Orion Pax. Optimus left with Megatron, who was the first to notice about Optimus amnesia as they had a truce in attempt to stop Unicorn at the time, due to remembering him as a friend when Soundwave opened a GroundBridge to the Decepticons war ship. Megatron took advantage of Optimus amnesia as he was brought aboard Megatron war ship and was told false info about the Decepticon and the Autobots. Orion Pax, Optimus Prime, was put to work on Project Iacon, finding old relics from Cybertron, as Megatron was able to get Autobot codes on their coordinates which turned out that all the relics were hidden on Earth. Orion Pax was able to decode some entireties then became curious about Starscream whereabouts but Megatron told him a false lie about where he is. Orion Pax sees Starscream with energon cubes, as he snuck aboard the war ship to get some, as he calls him Optimus Prime which confused him as to why he called him that but he does begin to question everything Megatron told him, after Starscream left the war ship. Wondering about who Optimus Prime is, Orion Pax hacked the Decepticon files which were hard to hack but was able to break through them then became stunned to see that he is Optimus Prime when he broke through. Orions hacking didn't go unnoticed by Megatron, who knew he would find out the truth sooner or later. Megatron forced Orion to finish Project Iacon, as he would't cooperate with them now due to knowing the truth. Orion escapes the war ship to confront Megatron as he made it clear that he may not be a Prime but he knew the right side to be on. Thanks to his human friend Jack, Optimus was able to get his memory back but he could't remember anything that happened during his time on the war ship but Ratchet assure him that deep down within his spark he knew he was an Autobot and could't hide his true self weather he was Orion or Optimus. Despite having his memory back along with being aware of what happened when he surrendered the Matrix of Leadership, Optimus still didn’t remember how much info he supplied to Megatron when he had amnesia. Following a near death experience and an upgrade by the Forge of Solus Prime, he gains a jetpack, a larger size, and an all-terrain expeditionary fighting vehicle for an alternate mode. During this time he is shown to be capable of flight and seems to have increased his strength as he is seen taking down a whole group of Insecticons easily. After restoring Cybertron to life at the end of the third season, the series' finale movie, Transformers Prime Beast Hunters: Predacons Rising, saw his recovery of the AllSpark and subsequent sacrifice to save it from Unicron and return it to Cybertron's core.

Millions of years later, Optimus was one of the thirty-five Autobots rebuilt into modern machines by the ship"s computer. Some time later, Jazz reported that he had spotted Decepticon activity at a nearby construction site. Optimus decided to take a proactive angle to their war with the Decepticons, and led the entirety of his troops to the Decepticon base. Once there, they found themselves allowed in by Megatron, feigning a friendly demeanor. Not fooled by Megatron's claims that he was making an honest living heading a construction company, Optimus engaged the evil robots in combat, before being blasted out of the Decepticon base. Optimus and his troops were sent tumbling down the cliffside beneath their feet. The Autobots suffered only minor damage from the fall, and after getting patched up, moved out once more to stop Megatron's plan, now well under way. Megatron was holding millions of humans hostage in a bid to get the Earth to surrender unconditionally to the Decepticons.
The Diaclone Powered Convoy figure had several additional features and modes which were mostly excised or left unmentioned for the Transformers release of Ultra Magnus. Principally, Powered Convoy came packaged with "Powered Buggy", who was left out of Magnus's release (see notes below for further details). Omitted from Magnus's instructions is the ability of his chestplate and super robot head to combine to form a small vehicle; the Powered Convoy version of the figure included small rolling wheels on the underside of the chestplate which were removed for Ultra Magnus. Additionally, three additional modes were included in the Diaclone instructions that Hasbro left out: a "preparation base" mode and an "Autobot base" mode were excluded entirely, while the third, a "catapult launcher" mode originally intended and proportioned to accommodate the Diaclone Jet Robo figure that became Starscream, was shown only on the front of his packaging, interacting with Silverbolt. The Japanese release of Ultra Magnus—released as part of the Scramble City sub-line—did include instructions for the preparation base and catapult launcher modes, but replaced the original Autobot base mode with a new configuration.
At BotCon 2005, Hideaki Yoke revealed that Optimus Prime (or more accurately, Diaclone Battle Convoy) was not designed by a single person, but rather a team of Takara designers as the one who was originally assigned the job had fallen behind. It is said that a young Shoji Kawamori was also a member of this team at some point, who would design THS-02 Convoy over 20 years later. The patent for the toy, however, lists Hiroyuki Obara as the designer.
This sculpt was redecoed by Takara into a golden Lucky Draw figure and later released in its original coloration with a trailer as a "Perfect Edition" (see below for both), while Hasbro would later redeco it into their Classics-branded "DVD Edition". The mold was also used to make Masterpiece Ultra Magnus and "Convoy Black Version", representing one of many drones built in Prime's image, rather than Prime himself.
Now I'm 30, so I don't know exactly what transformer toys you grew up with, but I had a bunch of the "Beast Wars" toys. Which with my nostalgia glasses on seemed much more detailed in my memory than what these new Transformers toys look like they are advertising on their website. However searching for a picture of my Optimus Primal toy... it isn't quite as detailed as I remembered. So my point is that it is probably a bit of nostalgia making you think yours were so much better than what they have now.
Optimus Prime can also combine with Leader-class Jetfire to form Jetpower Optimus Prime by slightly transforming his backpack and feet. Sadly, this takes away from his leg articulation, because otherwise he could never support the massive backpack he has in this mode. However, fans have created alternate configurations that increase leg articulation and movie-accuracy.
Part of the sixth wave of the 2010 Transformers toyline, this Optimus Prime is an all-new Deluxe class mold based on the original Generation 2 Laser Optimus Prime toy (see above). Transforming into a racing truck, he has some influences from the live-action movie Optimus Prime, including the more defined flames on his hood, athletic robot mode proportions and a more aggressive-looking translucent orange sword that can be held with both hands for maximum extreme chopitude. Optimus Prime features extensive use of translucent plastic in his arms, head and upper torso for a light-piping effect. Optimus also has a (non-detachable) matrix gimmick in robot mode that is formed by a relief pattern on the inside of the cab's side windows and is visible through the windshield/chest in robot mode. Like the Legends toy, he's part of "Reveal the Shield" and features a rubsign, this time on the roof. He is also very articulated and poseable, even featuring ankles and wrists that are both ball-jointed and hinged.
A re-release of the Leader Class figure from the Revenge of the Fallen line, but with retractable forearm hooks (as seen in his battle with Grindor) in place of the blades.[113] In addition, the figure comes with the unmasked head of Buster Optimus Prime and is painted with battle damage effects. A recording of Peter Cullen saying, "We must stop the Decepticons!" is played when his chest is pushed upward via a lever on his waist.[114] Fans have nicknamed this figure "Battle Hooks Optimus Prime" to distinguish it from the other Prime figures.[115]
In "Transwarped", after Sari realizes that she is not human, Optimus attempts to have Professor Isaac Sumdac and Sari reconcile with each other. Later, they encounter Masterson, who is piloting his headmaster unit on Starscream's decapitated body. He defeats Masterson by tricking him to transform into vehicle mode, which was impossible due to with the Headmaster unit on Starscream's body. Later still, during a melee with a rock creature that found its way to Earth when Bumblebee returned from his accidental transwarp, Optimus struggles to stop Sari, who goes out of control after using her key to upgrade herself.
As the Binaltech saga unfolds, the multiverse is threatened with destruction, until the original continuity is restored and the Binaltech universe is split into and preserved within its own separate universe. Overdrive confirms that the threat is over by visiting the dimension occupied by the original timeline, and reveals that in that world, Hot Rod had received the Matrix and taken over leadership of the Autobots as Rodimus Prime.
Optimus was providing cover-fire for a cross-universal battle when he suddenly seized up. Though he rebooted momentarily, he had terrible news for his Protector allies: using the power of the lower-dimensional Planicrons, Megatron had succeeded in sundering the Alternity's aggregate! Optimus urged his subordinates to not lose hope however, reassuring them that events were still unfolding within the parameters they had foretold. Sure enough, the battle swayed back in the Autobots' favor when Thundercracker, disgusted by Megatron's reckless use of their power, freed the Planicrons and robbed Megatron of his most powerful weapon. Optimus then tasked Elita Seven, the black Convoy, and Bumblebee to track down the doorway that would allow the Planicrons to ascend to the higher-dimensions, putting them on the path to supersede the Alternity as multiversal protectors. While they attended to this task, the rest of the now-former Alternity busied themselves by destroying Megatron's auto-avatars, weakening the villain and disallowing him from interfering further with the Planicrons' destiny.
The main Prime line in Japan, while mostly using the same molds, was quite a bit different from the Hasbro version. Hoping to snag a slightly-older market, the toys were given a bit of "model kit" vibe. Paint operations were reduced and replaced with old-fashioned sticker sheets, so you had to customize/complete the toy itself... and then there was the blatantly model-kit Arms Microns packed in with every toy.
This new smaller mold of Optimus Prime features a similar transformation to the original toy. Unlike most transformable figures in this line, Optimus completely lacks 5mm fist holes. Compared to the finalized toy, the product photo on the back of the box has a number of deco differences, most notably silver thighs and white accents above the front windows in addition to those below. The same box photo and the more deco-accurate stock photo (right) also neglect to fold out his fists, which is the only other step in his two-step transformation.
Or instead of adding a surface to the package, sell it with its own little plaque / platform. A really thin piece of hard plastic or something that is smooth as well as possibly having a graphic or something printed on it. And then market it as a collectible and only make so many of them. I'm thinking in the price range of $199-$299. I'm not sure the costs going into it, so I can't say.
MATTY COLLECTOR SPECIAL SALE If you missed out on the original Matty Collector figures, you’re in luck; many items are back in limited quantities! https://www.bigbadtoystore.com/Search?T ... geSize=100 ------------- NEW PREORDERS ------------- TRANSFORMERS STUDIO SERIES Reach past the big screen and build the ultimate Transformers collection with Studio Series figures, inspired by iconic movie scenes and designed with specs and details to reflect the Transformers movie - Read More
Prime's body was entombed in a massive deep-space mausoleum with the many other fallen Autobots. In 2006, his grave was desecrated and his body reanimated by Quintessons in an attempt to destroy the Autobots by using Prime to lure their space fleet into a trap. The Matrix was able to purify Prime of the Quintesson influence, and he ordered the other Autobots to clear out while he piloted his flagship into the Quintessons' detonator, triggering the explosion of a nearby sun. Prime was supposedly destroyed in the explosion. According to "The Return of Optimus Prime", Prime's body was recovered from the craft by two human scientists, Jessica Morgan and Gregory Swofford, just minutes before the explosion. As their ship departed, it was coated with solar spores, which induce rage and madness in any sentient being they came into contact with, released by the explosion of the sun. Jessica's father, Mark Morgan, loathed all Transformers, and his hatred only grew when an attempt by the Decepticons to steal a heat-resistant alloy he had developed resulted in Jessica being paralyzed. Swofford and Morgan reconstructed Optimus Prime's body, planning to use it as a delivery system for the spores in order to destroy the Transformers.
Thanks to fellow Seibertron user, Sabrblade, we have discovered some new in-hand pictures of the forthcoming Transformers Studio Series #38 Voyager Class Transformers Bumblebee Optimus Prime figure! These come couresty of YouTuber TonTon Reviews, presumably as a preview of his next review. For comparison, they have put this new entry into the Studio Series with MP-10 and Takara Tomy's Movie Advanced series "Classics Optimus Prime" (Evasion Mode Optimus Prime). This gives us a good - Read More
He does not come with his Mini-Con partner Over-Run in this release; instead, Optimus Prime and his wave-mate Demolishor debuted a new brand of Cyber Key: retooled from the standard Cybertron style key, this version lacked a sculpted insignia, so that any symbol could be tampographed on to it, and featured a Mini-Con-style Powerlinx socket on the back, allowing it to operate the figure's formerly-Mini-Con-activated "punching" feature without the figure itself having to be retooled.
Equipped with knowledge of the future and the danger that would soon be threatening the transformers, Ravage's machinations included trapping Megatron and a large army of Decepticons in a spacial rift with the intention of protecting the Decepticons from the approaching Unicron and forcing the Autobots to face the planet-eater unaided. The Decepticons would then be in a position to conquer the victor of that battle.
Both Jet Power Optimus Prime and the accompanying redeco of Voyager-Class Revenge of the Fallen Megatron would have come with an issue of the Unite for the Universe comic book, but due to the cancellation of both figures, the comics were eventually included with the Movie Masterpiece releases of Leader-Class Starscream and Bumblebee. Of amusement is the fact the comics are essentially showcasing toys that have been canceled.

Aside from the Powermaster feature itself, the main gimmick of the toy is the ability of the truck cab to combine with the trailer to form the larger "Super Optimus Prime" figure. This is essentially accomplished by standing the trailer up, folding the cab in half and inserting it into the empty cavity in the trailer's torso, forming an imposing—if almost entirely unposeable—robot form armed with all four weapons. The head of this super robot form is a separate piece which can be stored in the rear of Prime's trailer when not in use. While Hi-Q was always shown plugged into Prime's chest in artwork of this mode (as seen in the picture here), this was actually entirely unnecessary as transforming into Super Optimus Prime didn't require the standard Prime toy's legs to be unlocked.
The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[19] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original transformers toy line.
Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces.

Prime is armed with a spring-loaded missile launcher that stores on the rear of his truck mode (which becomes the backpack of his robot mode) when not in use. Like most of the weapons of the Energon line, it sports a 5mm post, allowing it to be held by most every Enegon figure, to combine with assorted other weapons and Energon weapons released in the series, and to peg into numerous compatible ports shared by many figures, like the hole in the radar of Prime's own trailer, or even conveniently placed 5mm screw holes like those of the Prime Force.


He was only available as an Amazon exclusive in the United States, but was also released at brick and mortar retails in Australia and Hasbro's Asian markets, such as Singapore. Oddly enough, even though the official press release for the figure identifies it as "14 of 30" in Hasbro's Thrilling 30 campaign, the packaging does not sport any such markings.[3] To complicate matters further, a later retrospective by Hasbro on Facebook identifies another product as "14 of 30", which doesn't sport any such markings on its packaging either.[4]
Hot Rod identified the Decepticons on board through the damaged hull and immediately attacked the targets within using low powered, rapid fire bursts. When the Decepticons returned fire, Hot Rod changed tactics and began firing more concentrated blasts at the shuttle itself. Eventually, he managed to disable the shuttle. With their cover blown, Megatron ordered his forces to attack and the Decepticons began pouring out, beginning their planned assault on Autobot City. Before focusing his attention on the onslaught, an incensed Megatron destroyed the observation platform on which Hot Rod and Daniel were standing. True to his protective Autobot instincts, the first concern of Hot Rod was for the safety of Daniel. Quickly shielding the young boy, the two survived the platform collapse but were soon cornered by Blitzwing and Shrapnel. Timely intervention by the old and experienced Autobot Kup diverted the cannon fire from Blitzwing and allowed the three of them to escape.
Optimus has the ability to change any part of his robotic body into a tool or gadget. He has swing lines in his wrists. His wrists can also fire capture bolas. His arsenal includes a grappler, fire extinguisher and a negative friction spray. It is interesting that, unlike all the previous series, his face can almost always be seen, because his mouthplate is retractable like in the 2007 live action film.
In the alternate universe of the 2003–2004 toyline and series, Transformers: Energon, Rodimus (lacking the "Prime" suffix in English, but still called Rodimus Convoy in Japan) was a great leader on Cybertron ages in the past and was viewed as a hero by many, including similar character Hot Shot. Desiring to escape the war that had consumed the planet, Rodimus departed Cybertron with a contingent of like-minded troops, most of whom settled on an alien planetoid and became the energon-mining Omnicons. Still, Rodimus continued on his journey with Prowl and Landmine, carrying the "flag of peace" from world to world.
The smallest of the Energon Igniters, the 3-inch Speed series transforms between modes in 7 steps or less. Unlike previous small movie figures, this series has a lot of detailing and articulation. The bots don’t end up looking like carved blocks of plastic. They could use a few more paint apps, but that’s to be expected at this price point. They even interact with cores sold with the larger figures (though “interact” in this case seems to mean “tow behind”).
This incarnation of Optimus Prime first appeared in the Transformers: Universe comic series in issue #2. As part of Omega Prime, he was escaping with various other Transformers from Unicron. He appeared again at the end of issue #3, brought in to Alpha Trion's lab to aid Optimus Primal. After this, both Prime and Magnus became part of Optimus Primal's army of Autobots, battling against Unicron's Decepticons.
Optimus Prime transforms into a red and blue semi truck of likely fictitious origin. In keeping with the simplified transformation scheme of the Rescue Bots line, Optimus Prime transforms from truck to robot when his legs are folded down, at which point his head, arms, and hands emerge; folding his toes into position will finish the transformation.

This redeco of the Ginrai tooling of the Powermaster Optimus Prime figure (released concurrently with the 2001 reissue of the Ginrai figure) was a Toys R Us Japan exclusive black repaint, made to represent the original Optimus Prime equipped for a special mission. All of his red and blue plastics were changed to black, his clear blue windows were now tinted red, making his overall colour scheme very reminiscent of the now-familiar 'Black Convoy' color schemes.
×