Of particular note to Prime completists is that this otherwise traditional reissue of the Generation One Prime cab has a brand-new head sculpt which is essentially a miniaturisation of the Masterpiece/20th Anniversary Prime's noggin. Not only does this give the "classic" Prime toy a more show-accurate head, it's also the first iteration of this familiar mould in which the head is actually poseable. Being one of the better-articulated early Generation One toys, Prime can finally look in any direction he can aim.
The box seems to have been created rather hastily from the Japanese original. It is roughly identical to the Tomy release, but with the Japanese text edited out... mostly. Random Japanese text remains floating in space on the top of the back panel and underneath the "Jetwing Optimus Prime" name on the front. Curiously, the left flap has been rewritten to eliminate mention of NEST and the jetpack's ability to detach, while the right flap has been (badly) edited to remove all mentions of MechTech.
The Happy Meal version of Energon Optimus Prime features a very similar transformation sequence to his larger figure, though his limited articulation means that his shoulder insignias aren't visible in robot mode when his arms are facing forward. His torso is hollow to contain his electronic "Energon Cube" accessory, which generates effects when activated by remote control. This remote is in the form of the Mini-Con jet Wreckage, and can mount on the top of his cab in truck form.
Kiss Players Convoy is a redeco of Alternators Optimus Prime. Unlike the Alternators version's bare red plastic, he is covered in a deeper red paint. Some of his body parts are cast in different colours, such as his shins, and has a much more intricate paint deco based upon Masterpiece Convoy. He is armed with his small engine pistol and a pink surfboard that can be reconfigured into either two small blades or a large double-bladed sword.
If Optimus led his troops back to the Decepticons’ poison lab, the convoy happened upon the Decepticons hauling barrels of poison out of the poison lab. Windcharger and Ironhide suggested two different plans to Optimus: Windcharger wanted to use his magnetic powers to cause a confusion, while Ironhide wanted to simply go in for a full frontal assault.
The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his Matrix of Leadership, as is a Movie-style Matrix cover (not pictured). He also comes with an alternate hand that allow him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands and helmet, for some reason...
Minor note: Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
Released as part of the second wave of Clash of the Transformers subline imprint that's exclusive to Toys"R"Us stores, this Power Surge Optimus Prime is a redeco of the toy above, featuring transparent blue parts, white paint applications to the shoulder armor/front truck kibble, his chest, & leg/trailer striping to resemble his larger Power Surge Optimus Prime figure.
A slight redeco of Takara's Deluxe-size Optimus Prime was released as part of a special set commemorating both the 20th anniversary of Transformers and the 30th anniversary of its progenitor, Microman. Coming with an exclusive metallic redeco of Takara's Kicker, which was based on the Microman body, this Prime featured a chromed grill where the original had painted plastic, and supposedly slightly shinier plastics. Very slightly.
In Titan Magazines' UK Transformers magazine, a comic strip on Optimus Prime, written by Simon Furman, would reveal where he was during the events of Movie Prequel #1. As he carries out his fateful plan to send the Allspark into space, the Autobot base is attacked by one of Megatron's drones with specific orders to kill him. As it locates the Allspark, Prime does the only thing he could think of to prevent it from transmitting its location to Megatron. He transforms into protoform mode and physically rams through it. Recovering in time to see the Allspark blast off, Prime is granted a vision of their war on Earth.
A repaint of the Armada Supercon Optimus Prime, minus the Mini-Con, but instead had a Cyber Key with a Mini-Con port in it. Repainted to match Cybertron Galaxy Force Optimus Prime. This is supposed to be a drone which Optimus Prime controls to get into small places, built for him by Metroplex. Several paint variations of this toy exist, and early releases have the forearms swapped, just as had occurred with the last repaints of the mold.
Q-Transformers Optimus Prime is a super deformed toy based on his Age of Extinction design, transforming into a cute little Western Star 4900 SB. It was sold as an exclusive at Transformers Expo months before the proper release of the toyline. Being only one inch and a half tall, this is actually the smallest transformable figure of movie-verse Optimus Prime, and it even gets close to being the tiniest transformable Optimus Prime ever made if it wasn't for another slightly smaller Q-Transformers release.
A figure of Prime combined with Jetfire was released as part of the second Big Transformers wave, which came with no accessories of its own, but could hold any of the weapons released with the other second wave figures, including Jetfire's gun, the Star Saber, the Skyboom, and the Requiem Blaster. As with the first wave figures, he came packaged with Ramune candy.
The first Transformers toys were created from two different transforming robot toylines from Takara, the Car-Robots and Micro Change, from the Diaclone and Microman series, respectively. Hasbro acquired the rights to sell them in the United States but, instead of selling them under their original names, they were rebranded as "The Transformers". The first two years consisted primarily of reusing the Car-Robots/Micro Change molds. The earliest toys had some parts made of die-cast metal, which were eventually phased out.
The "Breakout Battle" set includes another take on a screen-accurate "Scrapyard Optimus Prime", featuring a brown paint wash on tan plastic. The set was a shared exclusive between Toys "R" Us, online retailers such as Big Bad Toy Store, and Myer in Australia. The set was released in Australia, Singapore, and Canada but never actually made it to retail in the U.S. The set also includes Rollbar and a Vehicon.
The Premium Series Optimus Prime is both a retool and a redeco of the Leader Class Optimus Prime toy. The major selling point is a more movie-accurate headsculpt with longer ears and detailing based on the final CG head design, and a flip-out energy sword to replace the ion blaster that was included with previous versions of the toy. A smaller laser is seen when it flips out with the sword. This energy sword is detachable and attaches where the Ion Blaster did, compatible with non-premium Optimus Prime leader class based releases. Because his ears are much longer, the truck roof panel that hides his head now has two holes cut into so the head can fit inside the cabin.
This retool of Revenge of the Fallen Leader-Class Optimus Prime features the head from Buster Optimus Prime and has had his blades replaced with semi-articulated Battle Hooks for face-destroying action! He has a darker paint job and sports black splotches on his body and head to signify battle damage. However, due to these extra "battle damage" paint applications, some other paint applications that were present on the Revenge of the Fallen release were omitted. He also sports a new voice box in robot mode, replacing the infamous "I am Optimus Prime!" with "We must stop the Decepticons!" The international release, however, retains the same abbreviated "Optimus Prime" sound clip as the original release. To the annoyance of many fans, this version was the main version released just about anywhere outside the United States (all of Canada, Latin America, Europe, and Asia). The box also mentions racing sounds, which may or may not be referring to the button-activated diesel engine noises carried over from the Revenge of the Fallen version of the figure.
Optimus was made available as a mail-away toy in the "Digital Doom on the Highway to Destruction" offer in the US in 1986 to coincide with the Transformers movie in 1986. He cost $21.50 and 5 robot points, and came with a special Movie Edition Certificate and a round sticker that read " Movie . Edition . Transformer" with the Autobot symbol in the middle. (This item is considered rare.)
In another possible sequence of events, the trio returned to Autobot headquarters to relate their findings to Optimus Prime. The Decepticons planned to use a Destruction Beam to create a fault line near Center City, which would in turn be exploited by Rumble’s earthquake-inducing abilities to destroy the entire area. The Autobots then decided to split up in two groups, one to attack the Decepticons’ fortress, the other to stop Rumble in Center City. Optimus headed the lead team.
Unlike previous Convoy toys, the cab section did not separate from the trailer, instead forming the arms of his imposing 12-inch tall robot mode. He lacks any sort of leg articulation in this mode, but his battery powered treads can provide him with locomotion. Star Convoy's chest can open to reveal a control center for Micromaster figures such as his partner figure Hot Rodimus to ride in.
After having spent an extended period of time lost on Quintessa, Optimus was returned to Cybertron by the Turbomasters during their efforts to retrieve the similarly lost Flash, who he had been drawn into Perceptor's Dimensional Interface Assembly. The Age of Wrath Pt.5 Though badly damaged, Optimus led an insurrection against the then Megatron-controlled Cybertron, and successfully overthrew his enemy from power, all the while thwarting a Quintesson invasion. The Age of Wrath Pt.6
Part of the first wave of Bot Shots Series 2 five-packs, this redeco of the original Optimus Prime toy is cast in translucent blue plastic, with his cab painted white. Despite possessing translucent plastic and more lopsided stats than a regular Bot Shot, he is apparently not labeled as a Super Bot. This version of Optimus comes with similarly-themed with new redecos of Bumblebee, Mirage, Ironhide, and Jetfire.
A heavy retool of Combiner Wars Ultra Magnus, this Optimus Prime is based on the Powermaster Optimus Prime toy from 1988. Despite this, Hi-Q (now renamed 'Autobot Apex', presumably for trademark reasons) doesn't form the engine on Prime's chest; instead, he transforms into a de-faceplated version of the original Powermaster Optimus Prime cab robot head, over which a helmet slides during transformation to complete the Powermaster Prime look. In all three of Optimus Prime's modes are various pegs and seats with which Titan Master figures can interact. Like other Leader Class figures, his base mode can connect to other Titan Returns figures with base modes.
The color scheme of this special redeco of Super class Optimus Prime was decided through a colouring contest held in the December 2004 issue of TV Magazine, in which entrants coloured in lineart of Prime in the scheme they wanted to see. The winning entry rendered Prime in a... distinct palette of grey, cream, dark red, and purple chrome, with blue, white, and yellow drones. It was limited to only ten pieces, making it one of the rarer Transformers toys in existence.
Due to the interference of Ravage, the same as the one who appears in the Beast Wars, most of the events of the original animated feature do not transpire. The most influential of these events is the Battle of Autobot City. Because this battle did not occur, Optimus Prime and Megatron do not have their final showdown. This means that, for this continuity, Optimus Prime does not die and Megatron is never reformatted into Galvatron. As a result, Optimus Prime is able to lead the Autobots during the Binaltech saga.
In 2007, the Optimus Prime of universal stream Primax 109.0 Beta encountered a mysterious messenger from another world: another incarnation of himself from a parallel dimension who left him with a warning. Two years hence, Megatron would bring the terrifying super-dimensional lifeform known as the "Beast of Time", the Hytherion, into their dimension to destroy Earth. The only thing that could battle the Hytherion was the power of the super-evolved multi-dimensional race of Cybertronians known as the Alternity. Prime agreed that when the danger appeared, he would join the Alternity in the fight.
A very limited number of Gold Masterpiece Convoy figures were given away in a Lucky Draw contest in Japan. The figure uses the same design as Masterpiece Convoy, but every piece, including the windows and weapons, is cast in a gold color, reminiscent of his electrum coating from the episode The Golden Lagoon. The only exception is the tires, which remain black rubber. It comes packaged in the usual Masterpiece Convoy box, with the only telltale sign being the gold lettering in the "Master Piece" label. It's not clear how many were made, but it is thought to be no more than 10 or 20.
Takara's version of the figure was released in their markets slightly earlier, as the first of what would come to be several installments in their Masterpiece line. In addition to coming with a cardboard trailer that the buyer could assemble to "complete" Prime's truck mode, Takara's release differed from Hasbro's by featuring longer smokestacks (kept short on the Hasbro version for safety reasons, but incorrectly shown to be long in the stock photography shown at right), and lacking the black scorch-marked "battle damage" paint applications Hasbro included on the figure's shoulders, wrists and abdomen.
Marissa and Prime are now on the run from the EDC and are also frequently attacked by the mysterious "Legion" Transformers. When faced with such foes, Marissa unleashes her "Kiss Player" ability by kissing Prime, fusing with him once again, increasing his power so that he can best their opponents. Prime is armed with the Surf Blade, a weapon formed out of Marissa's surfboard, wielded expertly thanks to the knife skills Marissa passes on to him when they merge.
Sometime after the Autobots and Decepticons awoke in the 1980s, the original Megatron gained access to one of Earth's Voyager spacecraft and inscribed a message on the disk on board. In the event that he lost the War, Megatron left instructions for the descendants of the Decepticons to use transwarp technology to travel to Prehistoric Earth, locate the Ark, and change history by killing Optimus Prime. The Agenda (Part 2)
1. Color diversity: Back in the 80s, most sets were comprised of a few basic colors; red, blue, yellow, white, gray, and black. It was much easier to acquire a “critical mass” of pieces in each color to start building one’s own creations in coherent color schemes. Space, Town, Castle sets all had the same basic colors. Today Lego uses a much wider array of colors in their sets. While this adds a lot of variety and visual appeal to today’s sets, this means that one has to buy a much larger number of sets (or scour bricklink) to get achieve a workable critical mass of pieces in each color. After buying some of the modern sets, I end up with a few dark-blue or lime-green pieces that I don’t really have enough to much with other than use as accent colors. They end up in my misc color bin in the event I decide to build the set they originally came with or sell them off on bricklink.
A Japanese TV Magazine exclusive, this release of the Super-Con class Prime toy has almost all of his parts cast in translucent coloured plastics—hence the 'crystal' moniker—representing the character's disembodied spark after his destruction in the Armada cartoon episode "Crisis" and resurrection in "Miracle". What that means for poor Over-Run (or "Surge" in Japan), also cast in translucent plastic, we couldn't say! Available via mail-order, only 5000 pieces were distributed in October of 2003.
A redeco of the Dark of the Moon Deluxe Class toy, this Optimus Prime has large portions of his body, mostly his truck parts, vacuum metallized silver, and his light-piped eyes were neutered by blue paint. He comes with a redeco of Generation 1 Rampage's sword, which can be wield by his 5mm-compatible hands (Although not shown in the instructions). As his body, legs, and front truck kibble were chromed, care must be taken while transforming, especially with the shoulder kibble & the bottom leg's posts (This can be amended if you slightly widen the holes with 3mm hand drills). As with the original Dark of the Moon Deluxe Class figure, the instructions did not mention about forming the sleeper part until step 10, the pinky finger prevented the sword to peg down through his hands, and of course: his truck mode can attach with the Armored Weapons Platform included in the Chronicle or the Movie Trilogy Series figure. This figure has slightly loose shoulder joints.
We know that despite starting his fictional life as a lovable, horn-headed robot who could turn into a Volkswagen in Generation 1, Bumblebee's most well-known these days as a round-headed robot who turns into a Camaro. In fact, younger viewers might not even realize he was ever anything but the Chevy muscle car. But there’s one quirky continuity where he’s able to switch between original and movie modes at will.
In 2016, the figure saw re-release with the Combiner Force packaging. Being the tenth use of the sculpt at this point, some instances of mold deterioration have affected the figure, including: the vehicle front's bumper (which affects the space on the head/front bumper transformation), the headlights, and/or the legs, and the hole on the left shoulder is also prone to develop a stress mark due to the right shoulder's slightly "thickened" peg. Although the re-released badge didn't seem to unlock Optimus Prime after it was scanned, a later update to the game amended this.
1.) MP 10 EVA. Its arguably the best mold of any figure, and that color scheme! 2.) MP 12 Lambor. My fav transformer aand my fav car as a kid, cant beat it. 3.) MP Grimlock. Robot mode just looks like be dominates the shelf, regardless of who be is next to. 4.) MP Exhaust, mostly bc of the novelty factor as he is a pain to get in the States, plus his back story is cool. If not for that, MP 11 Skywarp would take this spot. 5.) MP Soundwave w/ cassettes. Duh!
Great read. I have noticed an absolute drop in quality myself. My sets in my youth range from 83 to 90. My sons are from 2011 and there is a clear distinction. Aside from the weight of identical bricks being different, the older bricks stay together in a much more durable way than the new bricks. To test this, I created the same models using all old bricks and all new bricks and the difference was marked. I understand doing certain things to reduce costs, but not at the expense of quality…
That’s actually a very big part, but I’d go lower than the $10 sets. The little tiny box sets with one minifig and some small vehicle or accessory that were $1-4 when I was growing up in the 80s now seem to be anywhere from $5 to $12 on the shelves. The cheapest of those are the sets that you could buy as a casual gift with pocket change in the 80s. Related to that, I’d like to see a metric that tracked the bottom price (both sticker price and adjusted price) of sets each year.
From this chart, you can see that there has been no real trend in the price per piece in these particular sets. The weighted average (larger sets weigh heavier than smaller sets) for the price is 13.19 cents per piece. The size of the ships did seem to increase in the last couple years; however, 3 data points does not make a trend (I will visit this idea later). For those of you who had a pirate ship growing up (I was lucky enough to get the Skull’s Eye Schooner), you may not have realized it, but it wasn’t cheap. And, the prices in this chart do not take inflation into account.
Megatron came upon Optimus and challenged his old foe to a duel. Optimus managed to gain the upper hand, but hesitated to deliver the killing blow when he discovered that Megatron had married the Matrix to his spark, corrupting it. Several Decepticons then swarmed Optimus, allowing Megatron to blast a hole through his chest. Dead and defeated, Optimus plummeted down into the bowels of Cybertron. Pax Megatronus Rodimus and Duke travelled far beneath Cybertron, where they discovered Ultra Magnus- the Autobot god of death -carrying Optimus's body away. Earth: R.I.P.
Optimus took the mantle of leadership as the civil war against the Decepticons erupted, and would remain in that position for the next nine million years. Ariel was rebuilt into Elita One, the commander of the Autobot resistance on Cybertron. The fate of Dion is left unrevealed. It has been speculated by fans that Dion might have become Ironhide or Ultra Magnus just as Orion and Ariel became Optimus and Elita, but this remains fan speculation only, and, his close friendship with Optimus notwithstanding, there is no evidence to support the idea.
This Optimus Prime is a non-transforming truck that is loaded with a number of gimmicks: Pressing the back button activates his Weaponizer-sque (or Stealth Force-sque) battle mode on his truck form, with the lights being emitted in the same time. He features both spring-loaded (truck front) and pressure-firing (both sides of the launcher) discs, with a flat character art of Slipstream & Sawback being sculpted on it. Optimus Also comes with additional Slipstream and Sawback figurines, which they can be (uselessly) attached on Optimus Prime's truck top & both sides of the launchers.
Omron's keychains were not limited to soft plastic, with die-cast versions of the same characters from the Mascot Keychain line being made available in their Transformers Strap range. This Prime is pretty much identical to the Die Cast Figure version of the character, just a little smaller—about 2.5" in height—and with the addition of a keychain with a wrist-strap.
Prime comes with all the accessories of his previous release, although his ever-changing ion blaster is now somewhat confusingly cast in blue plastic. He features one major additional accessory: an electronic display base sculpted with the image of the Matrix and the Autobot insignia. Pressing the insignia's crest triggers a series of electronic soundbytes, mostly quotes from the movie recited not by original actor Peter Cullen, but by Hasbro's in-house actor, Ron Hayden: "Autobots, transform and roll out!", "I want you to make a special run to Autobot City," "Megatron must be stopped!", "All we need is a little energon, and a lot of luck," and two samples of the classic transformation sound effect, one ascending, one descending.
Later, Orion Pax worked as an archivist in the Iacon Archives, and was friend to Ariel and Dion. Shortly after the trio encountered a group of time-traveling Aerialbots, the Archives were attacked by Decepticons, and Pax and Ariel were severely injured. The Aerialbots took them to Alpha Trion, who rebuilt them into Optimus Prime and Elita One respectively. Golden Age The Matrix of Leadership was passed to Optimus Prime following the death of Sentinel Prime at the hands of Megatron. The War Within During the war on Cybertron, Optimus Prime came to the aid of Getaway, Joyride and Slapdash, saving them right as the Decepticons Dreadwind and Darkwing were on the verge of destroying them. End of the Road
General Optimus Prime hailed from Primax 096.0 Beta. Ask Vector Prime, 2015/09/06 During the third Cybertronian war, General Optimus Prime profile card he fought on Earth against Megatron: in the Battle of Sherman Dam, the two fought directly but the battle would have gone against the Autobots if not for the arrival of the Dinobots. Ask Vector Prime, 2015/09/06 In the latter stages of the war, he upgraded himself with heavier armor and weaponry in order to match Megatron's flight and combination upgrade.
This figure was designed by Yūki Ōshima and produced by KT Figure Collection. The figure is actually a mini bust of Optimus Prime, which includes the head and the upper body without arms. The chest design comes with translucent blue windows and a grill on the midsection. There is also a button in the back. Pushing the button will open the chest and cause the Matrix to emerge, similar to the scene in The Transformers: The Movie.
The original Optimus Prime toy, as well as the Diaclone Battle Convoy toy that it was based based upon, transforms into a late 1970s red Freightliner FL86 Cab-over-Engine triple-axle semi trailer truck. The truck mode features rubber tires, and the cab is partially constructed of die cast metal. The windscreen section can open to reveal ultimately-unused seats that were originally designed for Diaclone's driver figures.
The BK tie in toy of Optimus Prime is essentially two toys in one. The first part of the toy consists of two truck halves, which snap together around a sculpted robot mode Optimus Prime. The truck is squat, and primarily blue, with outbursts of chalk gray paint and red flames. Pulling back and letting go activates the gimmick: Prime "drives" forward and bursts from the truck mode, "transformed" to robot mode. This gimmick has marginal success.
The second Nightwatch Optimus Prime was released as part of the "AllSpark Power" second half of the Movie line. He is similar to the UK version of Nightwatch Prime, replacing most of his red and blue with different shades of blue and black, retaining his resemblance to Diaclone Powered Convoy in most respects. However, the subdued black and copper on the first Nightwatch Prime have been replaced with gold and a very bright blue, to signify the All Spark energy affecting the Transformers. The translucent parts were also cast in purple translucent plastic instead of black translucent plastic.
Unfortunately for both Takara and Hasbro, the Generation Two series of Transformers sold poorly, and Hasbro abandoned it after two years. There were toys planned that never saw release. Most of these were G1 combiner team recolors or recolors of recent figures. Four unreleased molds were released in the Machine Wars line, and four more resurfaced in the Robots In Disguise series.
The Autobots and the Decepticons came to a distant world in the grip of an ice age. Assuming alternate modes based upon the dominant (though doomed) indigenous creatures of this planet, they continued their ancient, unending war. However, the Autobots, with their energy levels dangerously low, withdrew from combat as the world grew colder. They sought refuge in a deep cavern and entered stasis lock, awaiting the day when surface conditions changed to better suit their operation. Hearts of Steel #1 Optimus lay under the Mare Rurek Glacier. Infestation 2: The Transformers #1 Millions of years later, Bumblebee was awoken by the hammering of humans working on a rail line. He briefly considered awakening Optimus Prime, but thought better of it. After discovering the world had changed significantly, Ratchet thought there was no reason to awaken Prime. Hearts of Steel #1 When Bumblebee discovered the Decepticons were once again active on this world, Ratchet and Prowl agreed that the Autobots must intervene, but again decided out of rousing Optimus from his slumber. Hearts of Steel #2
Not depicted in the instructions or stock photos, Roller can attach to Prime in vehicle mode via two tabs on the vehicle front which slot into two corresponding slots on Prime's feet. Another undocumented feature is that the butt of the Ion Blaster can be inserted between the barrels of Roller's weapon mode to form a longer weapon. Also not shown in the instructions but depicted on the stock photo on the card-back is that Prime's shoulderpads can be rotated up; the intended positioning for this is notched, although you can position them at other angles.
An absolutely incredible 28 seasons in, The Simpsons writers and producers have had to be unbelievably creative in coming up with a new couch gag for more than 600 episodes. They’ve had a doppleganger Simpsons family walk in on the family, the whole town has absurdly squeezed into their living room, and we’ve toured the inner workings of Homer’s body.
Each arm features flip-out blades that trigger when a button on the forearm is pressed. Each of these blades has a Cyberglyphic symbol on it. The blades severely restrict Prime's arm articulation when retracted, as they get in the way of the kibble, but as there is very little one can do with Prime's arms without causing the blades to deploy, this is hardly noticeable.
Trailer (トレーラー Torērā) was often sleepy, but was the strongest of the BeCools. He could carry stuff in his trailer. The Self-Introduction Chapter When Trailer came across a traffic jam, he crashed into the BeCools holding him up, forcing them to transform into robot mode and realize they could just walk past the jam. The Story of the Surprising and Big Traffic Jam! When the same bunch of BeCools were stuck before a hole, Trailer selflessly used his body to act as a bridge for the other BeCools. Yellow Sports Car was so inspired by his heroism that he offered to fill the hole so that Trailer could pass through. Trailer did so and sped away, leaving Yellow Sports Car in the hole. The Story of Mister Trailer's Big Success!
Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe. Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.
Two custom-made pieces (presented in robot and vehicle mode) by the Hasbro Transformers team as the grand prize for G4TV and Jumpcut's contest for fans to remix selected Transformers clips. Won by TFW2005.com member James Zahn, this one of a kind (well, two of a kind) piece is a almost fully vacuum-metallized Leader class Optimus Prime in red, silver and blue (based heavily upon Generation One Optimus Prime), presented with a custom display base with an embossed silver Autobot insignia and a perspex display case.
Outstanding work here. After reading a number of complaints about how the price has ‘increased’ over the years, it’s great to see this analytical approach. One additional hypothesis I have is related to the increase in the number of sets released each year, which would appear to be supported by your data. More sets to buy to be ‘complete’ makes for more money out of pocket.
Hot Rod would make his first IDW Publishing appearance in a Spotlight issue focusing on him. In this, he was shown to be newly promoted to command of a group of Autobots including Gizmo, Backbeat and Dealer, who had been sent to secure the Magnificence, a device of some sort that could predict the future. Getting past the guardians, Hot Rod was swapping it with a fake to prevent the Decepticons from getting their hands on it when a seeming Decepticon ambush wiped out his squad. Determined to rescue the only survivor, Dealer, Hot Rod staged a daring solo rescue mission that managed to rescue Dealer - unaware that he was really Doubledealer, a Decepticon spy sent by Banzaitron to retrieve the Magnificence and now out to find where Hot Rod had stashed it.
Seibertron member, carytheone, has directed us to CarScoops.com, which has revealed that General Motors are to be auctioning off four of its Transformers Movie Camaros from Transformers: Revenge of the Fallen, Transformers: Dark of the Moon, Transformers: Age of Extinction and Transformers: The Last Knight. The car itself was as much of a star as the Transformers themselves and even the actors, so the interest is bound to be high. These are surely the auctions for “big bucks” Car - Read More
Jazz and Ironhide reported to Optimus that the Decepticons were stealing gas, and Optimus was able to use Roller to find out the Decepticons were using a molecular transfer device. The Autobots assaulted the Decepticon stronghold so they could take care of the device. Summertime Coloring Book After a rain storm, Optimus and most of the other Autobots went out on patrol. When the Decepticons used a fake message to lure Bumblebee out of the Ark so they could take it over, Optimus used the same gambit to retake the ship. A Message From Outer Space
Available as part of the exclusive Street Fighter II × Transformers toyline, "Convoy" is a redeco of Titans Return Voyager Class Optimus Prime in Ryu's traditional colors, fleshtones and all. He transforms from robot to tanker truck to plane and back. Both vehicle modes have "cockpit" areas to seat any Titan Master (or compatible) figure. Like all Titans Return Voyager class figures, he has built in mechanisms to "bulk up" his noggin. In his case these are spring-loaded pylons. The smaller Headmaster's robot mode is also painted to resemble Ryu.
Part of the new Generations Cyber Battalion series, Optimus Prime is a new mold which stands 7 inches tall, and transforms from a truck (which is based on the Generations Thrilling 30 Legends Class Optimus Prime figure) into a robot in just 7 simple steps. The figure's transformation engineering had taken cues from the Reveal the Shield Legends Class Optimus Prime figure, while it still retains the same ol' articulation.
When Sergeant Hound apprehended a criminal going by the name "C-81", rumors that the prisoner was in reality a "Megatron" that had gotten past the TransTechs' security procedures piqued General Optimus Prime's interest. Though Cheetor assured him that it was impossible for a "Megatron" to have been allowed in Axiom Nexus, the General's concerns did not fade. More pressing concerns took over, however, when the entirety of Axiom Nexus, and nearly all of the TransTechs suffered a sudden shutdown due to a surge in the Global Net. General Optimus Prime tasked Bruticus with keeping guard over the prison while he and Hound went to investigate the source of the surge, the planet's core.
Hey now, dont lump all geewunners together lol. Im all about g1, and love seeing g1 inspired, yet evolved designs. Such as the bee movie, and the recent toy lines. That said, I do respect others opinions. My son prefers bayverse on most and thats ok. I hate bayverse designs (except barricade and nitro zues in the last movie, badasses) but alot of people grew up on that, and it makes hasbro money, so no reason to hate it all together.
He does not come with his Mini-Con partner Over-Run in this release; instead, Optimus Prime and his wave-mate Demolishor debuted a new brand of Cyber Key: retooled from the standard Cybertron style key, this version lacked a sculpted insignia, so that any symbol could be tampographed on to it, and featured a Mini-Con-style Powerlinx socket on the back, allowing it to operate the figure's formerly-Mini-Con-activated "punching" feature without the figure itself having to be retooled.
(As an odd postscript to this tale of footwear-induced madness, although the promo pictures all showed the shoeformer as a white and navy blue sneaker that transforms into a white and aqua blue robot, the product actually released sported much darker colors for all the robot-mode parts, with a deep teal instead of aqua, and almost all the white replaced by an icky tan/cream/grey color, including the head. Basically, the figure looks like the promo picture viewed through really dark sunglasses. Although this certainly doesn't make it look any more like Prime, you might argue that it looks a little less like Magnus. Sorta. Maybe. Not really.)
Rodimus and Cyclonus appear together in the story Wreckers: Finale Part II from 2007. During the invasion of Cybertron, Cyclonus and Rodimus come to final blows, fighting each other to a stand-still. Both severely wounded, Cyclonus is about to kill Rodimus when the Predacon Rotorbolt arrives and kills Cyclonus for betraying him. Rodimus then helps Cheetor to drain the power of the Divine Light from Cryotek. When Rodimus is dying from wounds he received battling Cyclonus, Tigatron is unable to save the former Autobot leader, having given up the power of the Vok to save the Predacon Fractyl.
The main Prime line in Japan, while mostly using the same molds, was quite a bit different from the Hasbro version. Hoping to snag a slightly-older market, the toys were given a bit of "model kit" vibe. Paint operations were reduced and replaced with old-fashioned sticker sheets, so you had to customize/complete the toy itself... and then there was the blatantly model-kit Arms Microns packed in with every toy.
This straight reissue of the original Optimus Prime figure was released in Hasbro's European markets in the early 1990s, at the same time as many other Generation 1 figures were being re-released as "Classics". Oddly, although he shares their golden packaging, Prime is not actually identified as a "Classics" figure anywhere on his box, but is generally considered to be part of the sub-line for simplicity's sake.