Bumblebee may be beloved, but so is Optimus Prime and writers have seemingly killed off Optimus a million times in different continuities. So it can’t be too much of a surprise to know that Bee has met his maker on a few occasions as well. In the “Dark Cybertron” storyline of the IDW Generation 1 continuity, Decepticon Shockwave goes mad with power and wants to destroy all Autobots and Decepticons. In the process, Shockwave kills Bumblebee and sets off a chain of events that leads to retribution against Shockwave.


This Voyager-sized Optimus Prime is an all new mold (with a similar transformation scheme to Age of Extinction Voyager Class Galvatron, notably the shoulders, rooftop backpack, and the leg/wheels combo) based on his Leader Class figure. He features a similar but different transformation scheme, which results in a somewhat clean robot mode, although most of his vehicle kibble hangs on his back. He also features the sword & the shield based on his final design in the movie, albeit the sword being painted similarly to the Armor Knight Optimus Prime's sword. His Sword can store underneath his Vehicle mode or his robot mode backpack, while the shield can be stored on the truck's fifth wheel hitch, which can also tow the trailer included from the Japanese exclusive Mechtech Voyager. Although the pectoral armor can be slightly pushed up a little bit further, the pieces have to actually stop at where the rectangular pegholes are located.
Also, as a new feature, most figures include advanced "automorph technology", which is designed to create quicker and easier conversion, which means moving one part of the vehicle or robot causes other parts to move, creating a final shift to battle mode; this was successful because the transformation was more complex in the movie line than in any other Transformers toy line.
According to an early Universe-style profile published in The Transformers Comics Magazine, Optimus Prime's "official" nicknames were at one point considered to be "Autobot Commander", "Chief", "Big Boss" and "Roller". As far as it is known, no piece of fiction has ever purposely addressed him using these nicknames, though it's a fair bet he's been called "chief" at least once or twice anyway. And technically part of him is called "Roller" with some frequency.
Due to the interference of Ravage, the same as the one who appears in the Beast Wars, most of the events of the original animated feature do not transpire. The most influential of these events is the Battle of Autobot City. Because this battle did not occur, Optimus Prime and Megatron do not have their final showdown. This means that, for this continuity, Optimus Prime does not die and Megatron is never reformatted into Galvatron. As a result, Optimus Prime is able to lead the Autobots during the Binaltech saga.

Unlike previous Convoy toys, the cab section did not separate from the trailer, instead forming the arms of his imposing 12-inch tall robot mode. He lacks any sort of leg articulation in this mode, but his battery powered treads can provide him with locomotion. Star Convoy's chest can open to reveal a control center for Micromaster figures such as his partner figure Hot Rodimus to ride in.
Hot Rod would make his first IDW Publishing appearance in a Spotlight issue focusing on him. In this, he was shown to be newly promoted to command of a group of Autobots including Gizmo, Backbeat and Dealer, who had been sent to secure the Magnificence, a device of some sort that could predict the future. Getting past the guardians, Hot Rod was swapping it with a fake to prevent the Decepticons from getting their hands on it when a seeming Decepticon ambush wiped out his squad. Determined to rescue the only survivor, Dealer, Hot Rod staged a daring solo rescue mission that managed to rescue Dealer - unaware that he was really Doubledealer, a Decepticon spy sent by Banzaitron to retrieve the Magnificence and now out to find where Hot Rod had stashed it.[10]
In "The Elite Guard", the Autobot Elite Guard, composed of Ultra Magnus, Jazz, and Sentinel Prime, arrive on Earth to reclaim the Allspark. They don't believe Optimus' story about the Decepticons and Sentinel Prime wishes to have him court-martialled. When a fragment of the Allspark causes a production line to go haywire, Optimus finally stands up to Sentinel, retrieving the fragment, and earning praise from Ultra Magnus.
Apparently, early plans for the shield were to have it colored gold and silver, but it was later changed to gray and red. When a hand-painted prototype of the toy was first displayed at the 2013 New York Comic Con, the shield was colored yellow and silver; in addition, the original versions of the official Hasbro stock photos also depict the gold color, but the versions featured on the back of the toy's packaging were edited so they would accurately depict the final toy's colors for the shield. Meanwhile, the versions of the stock photos provided to websites and online retailers depict the shield in its final colors for the robot mode, whereas the vehicle mode photo is the unedited version featuring the shield's original colors. Furthermore, UK-based retailer Argos also featured unedited versions of the stock photos for both modes in one of its catalogs, causing some confusion among fans.[5] Sometimes, the spring loaded "Automorph" feature in his head is too strong and causes the head to fly off...
Near the end of the series, in what is generally regarded by fans to be his most impressive feat, Optimus Prime takes on Galvatron without combining with any other transformer. Traditionally, throughout the three series and RiD, Optimus Prime has been shown to be physically weaker than Galvatron. At the end of the intense fight, Galvatron proved stronger than Prime, but Prime managed to destroy Galvatron with Vector Prime's sword.
As with other earlier Cyber Series figures, Optimus Prime had a rather strange release cycle. At first, he only retailed exclusively in Asia and Latin America, with the closest to a U.S. release being in limited quantities from online retailer BigBadToyStore.com. He did, however, end up being available in the Universal Studios Theme Park, and also later as a Walgreens exclusive.
This release is a redeco of the Cyberverse Commander Optimus Prime figure, with a lighter gradient paint job that lacks the flames, and with Optimus sporting a G1 insignia. Instead of his jetpack and guns, he comes with his trailer/Armored Weapons Platform, which can transform into a base and exo-suit. The trailer itself features movie-style insignias.
A very limited number of Gold Masterpiece Convoy figures were given away in a Lucky Draw contest in Japan. The figure uses the same design as Masterpiece Convoy, but every piece, including the windows and weapons, is cast in a gold color, reminiscent of his electrum coating from the episode The Golden Lagoon. The only exception is the tires, which remain black rubber. It comes packaged in the usual Masterpiece Convoy box, with the only telltale sign being the gold lettering in the "Master Piece" label. It's not clear how many were made, but it is thought to be no more than 10 or 20.[1]
Bumblebee, being the popular character he is, was one of the first five characters inducted into the Hall in 2010, during a ceremony at BotCon; the convention for all things Transformers. He was joined, not surprisingly, by other super-popular transformers: Optimus Prime, Megatron, Starscream, and the Dinobots. Humans enshrined in the Transformers Hall of Fame over the last few years include everyone from director Michael Bay to Peter Cullen (the iconic voice of Optimus).

This Japanese e-Hobby exclusive is a redeco of Targetmaster Kup, made to represent the character [[Optimus Prime#The Transformers cartoon|Orion Pax]] from the cartoon episode War Dawn. He transforms into a Cybertronic pickup-truck thing. His truck bed has a peg-hole to mount his partner Barrelroller, who also serves as a hand-held weapon. The set also came with a re-deco of Wheelie as Dion.
A Deluxe sized version of Energon Optimus Prime. Looks like a smaller version of the Leader class toy, without any trailer or drones. Can Powerlinx with other Energon Autobot toys. This toy was a Toys-R-Us store exclusive in the U.S. and was packaged together with a downsized Energon Megatron. In Japan this toy was packaged together with Kicker and a Star Saber accessory.

In the alternate universe of the 2003–2004 toyline and series, Transformers: Energon, Rodimus (lacking the "Prime" suffix in English, but still called Rodimus Convoy in Japan) was a great leader on Cybertron ages in the past and was viewed as a hero by many, including similar character Hot Shot. Desiring to escape the war that had consumed the planet, Rodimus departed Cybertron with a contingent of like-minded troops, most of whom settled on an alien planetoid and became the energon-mining Omnicons. Still, Rodimus continued on his journey with Prowl and Landmine, carrying the "flag of peace" from world to world.


Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.
This figure was made available again, without any changes, in 2015, this time in new packaging resembling the then-concurrent packaging design for the Generations line, but replacing the name "Generations" with "Authentic Transformers". It was also given a new Hasbro product code number and UPC barcode, thereby technically making it a separate product. In 2017, it was re-released again, this time in a minor variant of the 2014 version's packaging (including the original product code number and barcode) that now lacked the reference to the non-existing "Reveal the Shield" gimmick.
The Diaclone Powered Convoy figure had several additional features and modes which were mostly excised or left unmentioned for the Transformers release of Ultra Magnus. Principally, Powered Convoy came packaged with "Powered Buggy", who was left out of Magnus's release (see notes below for further details). Omitted from Magnus's instructions is the ability of his chestplate and super robot head to combine to form a small vehicle; the Powered Convoy version of the figure included small rolling wheels on the underside of the chestplate which were removed for Ultra Magnus. Additionally, three additional modes were included in the Diaclone instructions that Hasbro left out: a "preparation base" mode and an "Autobot base" mode were excluded entirely, while the third, a "catapult launcher" mode originally intended and proportioned to accommodate the Diaclone Jet Robo figure that became Starscream, was shown only on the front of his packaging, interacting with Silverbolt. The Japanese release of Ultra Magnus—released as part of the Scramble City sub-line—did include instructions for the preparation base and catapult launcher modes, but replaced the original Autobot base mode with a new configuration.
Many Transformers come with tech specs (short for technical specifications) printed on the back of the box that they are sold in. The owner of the new Transformer is encouraged to cut out the tech specs and save it. This card has information on the Transformer, and will usually include the character's name, picture, indication of allegiance (Autobot, Decepticon or other), function, a quote, a description of the character, and numerical values of the character's various attributes. Although only the numbers can be truly deemed "technical specifications", the entire card is usually referred to as the Transformer's tech specs. Each specification is rated by a value from 1 to 10, 1 being the lowest, and 10 being the highest.
Rodimus gained the help of the criminal Witwicky family, believing they would help him learn more about Earth. After fighting Goldbug for leadership of the Autobots, he renamed himself Rodimus Prime. His first attack on the humans was to take control of the base controlling a human military satellite and use it to blackmail the humans into making him the leader of the world. The Decepticons were able to break into the base, where Heatwave used his ability to control machines to have the satellite fire on its own controls and then destroy itself.[16]
In an alternate version of this reality, Rodimus was forced to deal with a militant and aggressive Optimus Prime, and Cybertron was soon wracked by a three-way war between Optimus' Autobots, Rodimus' Omnicons, and Megatron's Decepticons. Unfortunately, the balance of the conflict tipped with the arrival of dimension-hopping tyrant Megazarak, whose Destructicons allied with the Decepticons, creating a force that soon annihilated Autobot and Omnicon alike. However, the Destructicons then turned upon their allies and destroyed them before being abducted by Unicron. This universe was then drained of all life and energy by Tornedron, whose creator Primacron was also destroyed.
In 1986 the Transformers animated movie had been released, and during the run of the movie, through a pamphlet that came with certain figures, you could order certain Transformers through the mail, such as Optimus Prime among other toys. The toys came in a standard brown mailer box, with items, booklet, and a limited Edition Movie certificate and sticker.
Optimus Prime led a group of Autobots who left Cybertron aboard the Ark, which was shot down over Earth, sending them into stasis for four million years. Optimus was badly damaged in the crash, and the prognosis wasn't great, but he recovered in time to announce the Autobots had no choice but to involve the humans in their war. Following a battle at Dyson Dam, Prime persuaded Jetfire to join the Autobot team. When the Decepticons headed through the space bridge to Cybertron, Optimus followed, only for him and his team to be ambushed and imprisoned.

Smallest Transforming Prime was redecoed the following year for the second wave of the line, into a color scheme based on his Generation 1 cartoon appearance featuring brighter reds and blues, white thighs, yellow details on his bumper, and blue eyes and windows. This version of the figure was made available for a second time in the next wave ("Wave 2.5"), with a new anime-decorated version of the Combat Deck now available as a rare "chase" figure.
During the war, Optimus was killed in battle by Megatron, but was eventually resurrected. The Fight Begins Coming to the dire realization that the war against the Decepticons had become a never-ending arms race, Optimus Prime challenged Megatron to single-combat, with their troops acting as witnesses to their terrible and final clash. The battle between both faction leaders ended with Megatron beaten down and goading Optimus into delivering the kill shot...
This Japanese-exclusive black-and-gold redeco of First Edition Voyager Class Optimus Prime was available exclusively at the fourteen stores taking part in the Cybertron Satellite promotion. It depicts Prime coated in an alloy reverse-engineered by Ratchet from MECH equipment that protects Optimus against Dark Energon and other techno-biological hazards.
According to IDW Publishing's Transformers: Movie Prequel comic book, Optimus Prime and Megatron co-ruled Cybertron until Megatron began a war for control of the Allspark. Optimus formed the Autobots, a militia of civilian transformers sworn to protect the Allspark. Optimus fought back, willing to doom Cybertron itself to deny Megatron the Allspark. His reasoning was that a new homeworld could be rebuilt with the Allspark once Megatron was no longer a threat. He entrusted Bumblebee with the task of distracting Megatron at Tyger Pax long enough for the Allspark to be sent into space.
Like Chomp & Stomp Grimlock, his truck kibble from the back can accommodate One-Steps and Power Battlers (Both Hasbro and TakaraTomy), activating his various voice clips and flashing lights by interacting with the magnets in their feet. He is notably less kibbly than other AOE Optimus Primes...from the front, at least. The back and sides are not so promising with large chunks of Western Star truck kibble hanging off his legs, making him look as if he's wearing a petticoat. At least the jetpack helps balance the whole thing out....

Available exclusively from Japanese clothing company A Bathing Ape in March 2013, "Convoy Reissue BAPE VERSION RED CAMO" (コンボイ復刻版 BAPE® VERSION RED CAMO) is a redeco of the original Optimus Prime toy sporting a unique new red color scheme, along with a red trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese packaging.


Like the larger First Edition figure, you can actually separate the robot mode from his vehicle shell, displaying both of his modes at once... albeit unlike the First Edition figure, this tweak could sacrifice the even stability between those two separated figures. Some of the pieces like the legs/rear wheels are particularly difficult to separate.
This figure was originally conceived by Hasbro to be another character (exactly who is unknown), rather than Optimus Prime, but Takara insisted that the toy be made into Optimus to help it sell well in their markets, as the vehicle mode was no particular draw, given its scarcity in Japan. Reportedly, the figure cost twice as much as other Alternators to construct, so Hasbro had to bow to this demand so Takara would help fund it. Ironically, Takara eventually wound up soliciting the figure not as Prime, but as his Super-God Masterforce lookalike, Ginrai (perhaps connected to the Powermasteresque headsculpt), before its Japanese release was cancelled and moved over into the Kiss Players toyline (see below).

A redeco of the Super Optimus Prime mold with a primarily red cab, much deeper blue, and a Prime Force uniformly colored in black was planned to be released with Smallest Transforming Transformers Generation 1 Optimus Prime as a Target exclusive. The toy got far enough along in development to have package artwork created by Dan Khanna, which was later revealed online, but it was canceled shortly before making it to full production. Its red, white, and black coloration earned it the festive nickname of "Santa Prime" among fans online.
With the data from the piece price evaluations I was able to also evaluate the average size of LEGO sets each year. As you can see on the chart below, the average size of sets released each year stayed somewhat constant from 1980-1990 until around 2000 which set sizes started to increase. The average set size seems to have peaked in 2008 (which saw the release of the Taj Mahal), but since then it hasn’t fallen to its pre-2000 levels. It seems to have found a new normal around 300 pieces.
Part of the first wave of Generations: Combiner Wars Voyager Class toys, this is a bigger, bulkier incarnation of Optimus Prime with a striking resemblance to Ginrai. He comes with two blasters which he holds via 5mm post. One of the guns is based on his trademark Ion Blaster, and both weapons store on the back of his vehicle mode as a makeshift engine block. His torso mode has several details that appear to be influenced by Energon Optimus Prime's super mode, including the head, chest, and thighs. In particular, the chest details are modeled after the Spark of Combination. He also features two pair of fake windows on his robot and gestalt chest halves. The combiner head can be used as a robot mode head if you're feeling silly.
When Robotmasters G1 Convoy was turned into a Lucky Draw figure, the color scheme into which he was redecoed was chosen through a children's coloring contest held in the pages of the December 2004 issue of TV Magazine. The winning entry was a... startling mixture of blue, orange and two shades of green, earning the toy the fan-appointed nickname of "Crayola Convoy". As with all Lucky Draws, it is extremely rare, with only ten units produced.
Brian Colin, Peter Smyth, Mark Buffington, Josh H., Propelstalz, Mary Crocker, Wayne Moulton Jr, Mitch Gross, Jim Valko, Andrew Brown, Lucy Ravitch, Nicholas Duresky, Heather Hofshi, John Kemp, Thorsten Karge, Natasha Dzurny, Keith Ives, Benjamin Chan, Neal Bhatnagar, Justin Farr, Regan Lee, Elaine, Nate Fugal, Stephanie Tennison, Jon Rasmussen, Ryan Pulis, Owen Duffy, Colman Reilly, Anthony, Mark Richman, Alexis Ohanian, Steve, Greg “TVsEgon” Skinner, Andy Saavedra, Daniel, Willie Raymond Taylor III, Chad Ingham, Irene Christian, Clinton Richmond, Jamey Stegmaier, James Allenspach, John Howell, Leif Terry, Tiago Pereira, Nathan Heath, Grinidon, Roman, Berserker Hew, Clark Stacey, Ben Harkins, Kayvaan Ghassemieh, Travis B., Justin Myers, Magna Nordgard, Jim Griffin, Jeff, David Smith, Matthew Titelbaum, Dennis Hitzeman, Daniel Lieske, Michael Jantze, Ruddy, Tom Damico, Kelson, Michelangelo Grigni

The earliest version, as shown in the first patent application for the toy, was to have the Prime cab be a triplechanger, turning from truck cab to jet or robot[3]. The nosecone of the jet and robot legs were released by the Powermaster lock in the same fashion as the legs in the final version. Optimus would have had winged arms in non-super robot mode. The super robot mode's head was also integrated into the trailer's hitch... and lacked a faceplate.
Hybrid Style Optimus Prime is an insanely detailed and complex transforming toy, created under the supervision of famed mecha designer Shōji Kawamori. Standing only three and three-quarter inches tall in robot mode, the figure is partially constructed from die-cast metal and features one of the most complex transformation sequences ever seen on a Transformers figure of its size. Alas, the small size of the figure also works against it, as it required several design concessions that resulted in (if we're being nice about it) an unimpressive cab mode.
Hot Rod first appeared in the American animated series during the events of The Transformers: The Movie (as a main protagonist), where he was one of the many Autobots stationed at Autobot City.[5] He was first seen fishing with Daniel Witwicky. When Daniel saw the shuttle that was going to make a supply run to Autobot City, he told Hot Rod and together they both went to an observation point, only to see a hole in the shuttle. The ship had been previously hijacked by Decepticon forces led by Megatron, with its crew killed.
Hey now, dont lump all geewunners together lol. Im all about g1, and love seeing g1 inspired, yet evolved designs. Such as the bee movie, and the recent toy lines. That said, I do respect others opinions. My son prefers bayverse on most and thats ok. I hate bayverse designs (except barricade and nitro zues in the last movie, badasses) but alot of people grew up on that, and it makes hasbro money, so no reason to hate it all together.
One of the single rarest Lucky Draw Figures in existence, this "Custom Color" redeco of Super Optimus Prime was limited to only one in the world. It was the grand prize of a coloring contest held in Septemeber 2005's TV Magazine, in which entrants colored in lineart of Prime with the deco they wanted to see. The winning entry was in green, blue and gold, while ten runners-up received one of five gold or five silver Lucky Draw versions of Prime.

In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.

Platinum Edition "Year of the Snake" Optimus Prime is a redeco of Energon Super Class Optimus Prime. In lieu of combining with his drones, Optimus Prime can also combine with Platinum Edition Omega Supreme to form what his instructions also call "Super Optimus Prime". The drones are color-matched to Omega Supreme, and can attach to four connectors on his body. In an undocumented feature, Prime can also merge with Energon Wing Saber.
Something of a shellformer, Convoy Nike Free is colored primarily white and red in his alt mode of a realistic-looking, scaled-down Nike sneaker, complete with (gratuitously long) real fabric shoelaces. In robot mode he incorporates some additional blue and silver in predictable areas and has a somewhat uniquely-shaped yet instantly recognizable G1-inspired head.
Hot Rod has a youthful attitude, and serves as an older brother figure to Daniel Witwicky, son of Autobot ally Spike Witwicky. He has a sort of mentor-student relationship with the veteran Autobot Kup. He was also good friends with Springer and Arcee. Later in life, he temporarily bears the Autobot Matrix of Leadership and becomes Rodimus Prime (Rodimus Convoy in Japan), and new leader of the Autobots.
The Transformers Adventure Easy Dynamic Series release, titled "Big Optimus Prime", features extra paint details and has two additional Autobot symbols on his shoulders. He also includes a different scannable badge, which is compatible with TakaraTomy's Transformers Adventures app. Scanning this will unlock Big Optimus Prime in the collection list. Unlike the American release, Big Optimus Prime is packaged in a windowed box, instead of an an open package.
The Hasbro stock photos of the toy is slightly mistransformed: his pectoral armor is not folded correctly in robot mode. At least a very small number of units feature a faceplate-less head sculpt which was probably intended for a later retool, but so far there is no news about this pretool being released in the future. This figure was also released in Toys R Us Japan in May 1st, 2017 as a store exclusive, likewise identical to the Hasbro release.
This figure was made available again, without any changes, in 2015, this time in new packaging resembling the then-concurrent packaging design for the Generations line, but replacing the name "Generations" with "Authentic Transformers". It was also given a new Hasbro product code number and UPC barcode, thereby technically making it a separate product. In 2017, it was re-released again, this time in a minor variant of the 2014 version's packaging (including the original product code number and barcode) that now lacked the reference to the non-existing "Reveal the Shield" gimmick.
Multiple reports suggest that the toy suffers from a design flaw, inferior plastic quality, or both: Due to his hands having peg-holes that are a bit too small to accommodate 5mm posts, they have a tendency to show stress marks on the inside after pegging his sword handle (or most other pegs) inside. Stress marks also tend to appear near his tiny hinged wrists. Fortunately, there have been no reports of the hands actually breaking on either location thus far.
Prime's body was entombed in a massive deep-space mausoleum with the many other fallen Autobots. In 2006, his grave was desecrated and his body reanimated by Quintessons in an attempt to destroy the Autobots by using Prime to lure their space fleet into a trap. The Matrix was able to purify Prime of the Quintesson influence, and he ordered the other Autobots to clear out while he piloted his flagship into the Quintessons' detonator, triggering the explosion of a nearby sun. Prime was supposedly destroyed in the explosion. According to "The Return of Optimus Prime", Prime's body was recovered from the craft by two human scientists, Jessica Morgan and Gregory Swofford, just minutes before the explosion. As their ship departed, it was coated with solar spores, which induce rage and madness in any sentient being they came into contact with, released by the explosion of the sun. Jessica's father, Mark Morgan, loathed all Transformers, and his hatred only grew when an attempt by the Decepticons to steal a heat-resistant alloy he had developed resulted in Jessica being paralyzed. Swofford and Morgan reconstructed Optimus Prime's body, planning to use it as a delivery system for the spores in order to destroy the Transformers.

Knight Armor Turbo Changer Optimus Prime is a Voyager-sized figure that transforms from truck to robot in just 2-steps: pulling his whole truck kibble to the front then fold down to complete the robot mode, although converting him back requires some few steps. His only articulation is the elbows, and he features 5mm compatible hands. He also features a "Knight Armor" gimmick, which consists of his mask popping out to his head with the press of the button on his chest. Take note that you need to flip back the mask manually before you turn him back into Truck Mode.
An exclusive version of Titan Class Metroplex was made available at San Diego Comic-Con 2013. He comes with 12 small, non-transforming figurines of Orion Pax, Megatron, Bumblebee, Thundercracker, Trailcutter, and Hoist, all in both modes. The figurines are based on their Thrilling 30 Generations Deluxe Class toys, and similarly to Decoys, the Autobot figurines are cast in red plastic, and the Decepticons in purple.

The Premium Series Optimus Prime is both a retool and a redeco of the Leader Class Optimus Prime toy. The major selling point is a more movie-accurate head sculpt with longer ears and detailing based on the final CG head design, and a flip-out energy sword to replace the ion blaster that was included with previous versions of the toy. This energy sword is detachable and attaches where the Ion Blaster did, compatible with non-premium Optimus Prime Leader-class-based releases. Because his ears are much longer, the truck roof panel that hides his head now has two holes cut into so the head can fit inside the cabin.

Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is an extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation 1 and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.


The TakaraTomy version, part of the seventh wave of Japanese Prime toys, is dubbed Arms Master Optimus, uses darker, metallic plastics, casts the backs of his thighs in metallic red, replaces his metallic silver paint with glossy gray, and replaces a few of his paint operations with customer-applied foil stickers, such as his insignias, shins, headlamps, the tiny yellow lights on his torso, and the blue deco on his truck panel sides. He has also been retooled with additional 5mm pegs for his thighs, roof, and lower backpack, as well as ports for his forearms, shoulders, smokestacks, fuel tanks, and roof. Instead of the rifle, he comes with a very large Matrix which can tab onto his chest as armor or mount onto the back of the truck cab, with the Matrix also being covered in 5mm posts and holes so that Arms Microns can be attached to it. He additionally comes with a clear-blue "Shining" version of the Arms Micron, R.A., who can combine with the Matrix to form the colossal Matrix Saber.

When the Decepticons turned up in the same forest that the Autobots were taking a vacation in, Optimus took great pleasure in stopping them and returning the forest to pristine condition. Forest Rescue Mission Optimus was undertaking some repairs when Bumblebee offered to help, but Prime told him the repairs were too hard for him. When later the other Autobots were dismissive of Bumblebee's report of a Decepticon attack, Optimus alone listened to him, and they subsequently defeated the Decepticons. Bumblebee's Dangerous Mission
Q-Transformers Optimus Prime is a super deformed toy based on his Age of Extinction design, transforming into a cute little Western Star 4900 SB. It was sold as an exclusive at Transformers Expo months before the proper release of the toyline. Being only one inch and a half tall, this is actually the smallest transformable figure of movie-verse Optimus Prime, and it even gets close to being the tiniest transformable Optimus Prime ever made if it wasn't for another slightly smaller Q-Transformers release.
Rodimus and Cyclonus appear together in the story Wreckers: Finale Part II from 2007. During the invasion of Cybertron, Cyclonus and Rodimus come to final blows, fighting each other to a stand-still. Both severely wounded, Cyclonus is about to kill Rodimus when the Predacon Rotorbolt arrives and kills Cyclonus for betraying him. Rodimus then helps Cheetor to drain the power of the Divine Light from Cryotek. When Rodimus is dying from wounds he received battling Cyclonus, Tigatron is unable to save the former Autobot leader, having given up the power of the Vok to save the Predacon Fractyl.[7]

A BotCon 2012 exclusive purple redeco of the Deluxe "Generation 2" Optimus Prime figure from the Generations toy line, with the sword's blade molded in clear yellow. Much like the 2008 Voyager figure, this figure has painted-in "battle damage" effects. The right side of the hood has the words, "I shall stand...", while the left side says, "The rest shall fall."
For its release in Korea, Hasbro Asia provided a collector coin featuring truck-mode Optimus Prime on one side and "MP-01L" on the other. The coin came mounted on a card featuring lineart of the Autobot leader's head, the stark black design of which could be mistaken for promoting the earlier "Sleep Mode" release. The limited release (and general lack of enthusiasm for the collector coins in Korea) makes this one of the more difficult Masterpiece coins to find.
After the Great War, Optimus Prime disappeared with other legends into the mysterious location on Cybertron dubbed J'nwan, where Optimus himself became the "Authority" who spoke on behalf of the others. Sandstorm, the leader of a rebellion in a 32nd-century firmly under the heel of the tyrannical Shokaract, entered J'nwan to plead with the heroes of Cybertron's past for aid. He hoped to convince them to join the fight against the Predacon warlord. After a mind-crushing journey which left all of his companions dead or deranged, Sandstorm finally found an audience with the Authority and his brethren, but they declined to help, with the Authority stating that their time was past and the war was no longer their war. The Authority then in some way manipulated Sandstorm's trip out of J'nwan such that it was comparatively short and simple. Paradox
Ralston marketed many breakfast cereals based on cartoons in the 80s and 90s. One of these was Transformers. The Transformers Chocolate Flavored Cereal was a chocolate-flavored concoction, not unlike Cocoa Puffs, manufactured by the Ralston Corporation. However, the cereal was sold only in some parts of the United States and was short lived. The cereal box had Optimus Prime on its cover. The box claims the cereal had "more taste than meets the eye" and also had the ability to "transform ordinary milk into chocolate flavored milk". There also was a mail-away offer for a Jazz toy. The few boxes that still exist are collectables,[5] (one of which went for $349 on eBay).
As a 25th anniversary set, Prime includes several new pack-in bonuses: a reprint of the first issue of the original Marvel comic book, a DVD containing all three parts of the animated series pilot "More than Meets the Eye", and three desktop wallpapers, and a battery-powered Autobot symbol that plays transforming sound effects, part of the first version of the Transformers theme song, and three voice clips performed by Peter Cullen: "I am Optimus Prime!", "Autobot, transform and roll out!" and "Megatron must be stopped, no matter the cost." There are some reports that the Autobot symbol could be worn out or damaged during the time of purchase.
When we are young, we do not know the value of money let alone the toys we play with. Our parents work tirelessly to buy us the newest, most popular toys and we never realize the effort that went into earning that money. Eventually we get our own jobs and have our own kids. The prices of the toys we had as kids comes as a shock. $150 for a toy? $200 for a toy? These prices are outrageous. It is supposed to be a kid’s toy right? Our eyes may be drawn to the large sets but that doesn’t mean that reasonably priced sets are not nearby. In addition, as I stated before, LEGO has started to market some of their sets to an older audience. That $400 Super Star Destroyer is not for your kid; it is for you. This market didn’t exist 20 years ago.
In robot mode, like Combat Hero Prime, the bottom of the truck became his familiar windowed chest based upon the original Optimus Prime toy. His main gimmick was light up LED headlights, and a lightpipe in the bottom of his right fist, illuminated by an LED in his right forearm, that would illuminate his clear sword or his double-barreled rifle if they were used in that hand. All three LEDs were activated simultaneously by pressing the sunroof-like depression on the roof of the truck.
×