1· To calculate the average price per piece in a year, I took the price per piece of each set made that year, multiplied it by the number of pieces in the set and then averaged all the weighted prices. I used a weighted average because when we are looking at the price per piece we are essentially saying we could buy x number of pieces for y dollars. Larger sets tend to have a lower price per piece so in effect you could get more pieces at that lower price that year. Note: this was done using US retail price data from Brickset.
LEGO has changed a lot in its history. It started as a wooden toy company before it discovered the benefits of molded plastic. Since the advent of the brick, we have been able to build everything from houses, to spaceships, to working robots. The increased detail and wider product line has allowed for the blossoming of the idea of LEGO as an art medium7. LEGO bricks walk the line between giving people more pieces that can be used to add detail and restricting the pieces to inspire creativity. There is a balance that can be seen through the amazing works, both large and small, that can be done with a bit of patience and an eye for plastic.
The first toy in TakaraTomy's United toyline is a redeco of the War for Cybertron Deluxe Class Optimus Prime, transforming into a Cybertronic "armored truck". As has been TakaraTomy's wont of late, he now sports a metallic red paint job, with brighter pink paint applications and cooler grey parts, and features several additional paint details to those present on the Hasbro figure in the form of black chest windows and pink lines on his face mask. His rifle transforms as well, folding and plugging into the roof of the vehicle mode. The rifle can also peg into his forearms, and, in its compact configuration, can attach to his shoulders via peg holes on the backs of his front tires or stored behind his back in robot mode.
Part of the first wave of Bot Shots Series 2 launchers, this new-mold Optimus Prime transforms into a very boxy Generation 1-styled truck with trailer. As a Spin Shot, one manually winds up his upper body beforehand when transforming him into vehicle mode, where striking the front of the vehicle will cause him to burst open and spin while auto-transforming. He comes with a launcher used to propel him to great speeds, as well as four cube targets for him to knock over.
A redeco of the Super Optimus Prime mold with a primarily red cab, much deeper blue, and a Prime Force uniformly colored in black was planned to be released with Smallest Transforming Transformers Generation 1 Optimus Prime as a Target exclusive. The toy got far enough along in development to have package artwork created by Dan Khanna, which was later revealed online, but it was canceled shortly before making it to full production. Its red, white, and black coloration earned it the festive nickname of "Santa Prime" among fans online.
Jetwing Optimus Prime is a retool of Revenge of the Fallen Leader class Buster Optimus Prime, with an accompanying large jet pack and massive dual Gatling Cannons. The base Optimus Prime figure has several modifications including: a new stomach area and elbow flares to reflect the changes to Optimus Prime's CG model in Dark of the Moon, modified lower arms to incorporate MechTech ports and clips for the cannons, and a retooled area under his back so the jet pack can fit on more securely. The dual energon blades mounted on his arms have been removed. The toy retains Buster Optimus Prime's electronics, but batteries are not included.
Hot Rod is featured again in Maximum Dinobots. Returning to Earth to continue his search, Hot Rod arrived at the gates of the Machination's complex, and Scorponok prepared himself to deal with the intruder. Unfortunately, Hot Rod found himself fighting well out of his weight class as he was man handled by Scorponok, who cheerfully bashed his face in, put out one of his optics and snapped his leg. The Headmasters dragged him into Scorponok's control room where, with absolutely no prompting, the big man explained his entire plan for the Dynobots, Skywatch and the Machination. Hot Rod seemed less than impressed with this rather mundane approach, which ticked Scorponok off enough for him to point out that it was obviously just the first stage in his master plan. He was also warned to remain awed or he'd be of no further interest. When the Dynobots and newly arrived Monsterbots seemed to turn Scorponok's plan on its head, Hot Rod burst out laughing, at which point, Scorponok ordered him taken out and shot. In the lift to the surface, Hot Rod suddenly erupted in flames, killing his captors, but draining his power supply. Weakened and with a crippled leg, he collapsed on the floor.
↑ The African American entrepreneur: then and now By W. Sherman Rogers page 321. Books.google.com. http://books.google.com/books?id=mbTUorcuXkoC&pg=PA321&dq=%22generation+2%22+transformers&hl=en&ei=woyoTPq8KI7hnQeIwOWjDA&sa=X&oi=book_result&ct=result&resnum=5&ved=0CD8Q6AEwBA#v=onepage&q=%22generation%202%22%20transformers&f=false. Retrieved 2011-04-04.
With the acclaimed Studio Series line marching onward triumphantly into 2019, we have just received a new review of the line’s latest offering, Battle-Damaged Megatron, which most of us know emulates Megatron’s appearance following the climactic final showdown between him, Optimus Prime and the Fallen in the second film. The review comes courtesy of YouTuber PrimeVs.Prime, who has thus far extensively catalogued the line beyond today’s subject. He goes into detail regarding the detailing - Read More
The first Generation 2 Optimus Prime toy was largely identical in sculpt to the original Generation 1 figure release. While his cab robot retained his original red and blue color scheme, his trailer was recast in black, with the original blue and silver striped sticker replaced with a red and silver one displaying Optimus's name. On the first release of the trailer, the internal components and Roller matched the blue of the cab robot. Later, the internal components were changed to a lighter blue, as was Roller. Another running change followed, making the dark blue of the cab robot match this lighter shade. A bright yellow "Autobot" tampograph was also added to the back of his right leg.
While stock photos and renders show the figure with a faceplate, this image posted by the Transformers Facebook page shows him with his mouth exposed. This was later found as a variant at least once. A running change was made, changing the blades to be more translucent. The semi-translucent blades release features a date code "73461", whereas the translucent orange blades version features a date code written as "80171".
Of particular note to Prime completists is that this otherwise traditional reissue of the Generation One Prime cab has a brand-new head sculpt which is essentially a miniaturisation of the Masterpiece/20th Anniversary Prime's noggin. Not only does this give the "classic" Prime toy a more show-accurate head, it's also the first iteration of this familiar mould in which the head is actually poseable. Being one of the better-articulated early Generation One toys, Prime can finally look in any direction he can aim.
A Japanese exclusive, this is a new line of Transformers toys shaped from Disney characters that were first introduced in 2009. Originally revealed in the November 2008 issue of Figure Oh! Magazine in Japan, it was a collaboration project between Takara Tomy and the Walt Disney Company. The first line of the toy series is the Mickey Mouse Transformer which was modeled after Optimus Prime with the same colors as its Transformer counterpart and can transform into a cartoonish trailer truck like the original version. The toy was released on February 26, 2009 following with the Black and White Version a month later on March 26, 2009. A figure of Donald Duck based on both Bumblebee and Herbie the Love Bug, and a second repaint of the Mickey Mouse trailer in Halloween colors, are also planned for release.
This set's Optimusses are based on the Prime incarnation. The larger Optimus is a smaller, simpler build than the first big kit, and makes use of ball-and-socket parts for increased articulation. It also carries a spring-loaded missile launcher. The Optimus Kreon's tampographs are based directly on the Prime cartoon model, though he carries an energon axe akin to the one from the War for Cybertron games. He also has a clear-blue extra "energon" torso piece.
One detail not reflected in most of Hasbro's photos is that the sun visors above Prime's windows are mounted on ball joints and can be positioned like they are in his CG design. The hood halves on his arms can slide up on their hinges and the blue panels at the back of Prime's lower legs can be pulled out slightly as well for further screen accuracy.
Another thing different now from when I was a kid (70s/80s) is that the sets contain much fewer basic bricks. It seems the models are made out of all these exotic specialized pieces which are less useful for general building. Is this a business strategy to sell more sets by reducing the reusability, a marketing ploy to sell more pieces by making every set include unique collectable parts, or just trying to make the models look more realistic/slick? I think Lego was more fun when the majority of bricks were basic.
As the Binaltech saga unfolds, the multiverse is threatened with destruction, until the original continuity is restored and the Binaltech universe is split into and preserved within its own separate universe. Overdrive confirms that the threat is over by visiting the dimension occupied by the original timeline, and reveals that in that world, Hot Rod had received the Matrix and taken over leadership of the Autobots as Rodimus Prime.
Alternity Convoy was simultaneously available in both this silver coloration, and a deco based on his traditional appearance termed "Vibrant Red" (see below). The figure was later redecoed to create "Convoy Super Black" (representing not Optimus Prime, but Universe Nemesis Prime), Alternity Ultra Magnus, and Alternity Dai Atlas. It was retooled into Transformers GT GT-R Prime, GT-R Saber, GT-R Megatron and GT-R Maximus.
This mold was redecoed into Universe Optimus Primal and Beast Wars Telemocha Series DX Convoy, and retooled into Beast Wars Reborn/Beast Wars Tenth Anniversary versus pack Optimus Primal. Takara also created multiple special variants, including all-gold (from Tele-V Magazine, only ten awarded), red and gray (Tele-V again, but only one awarded), and blue-fur (a Comics Bom Bom design-contest prize, only five awarded).
Optimus was one of the many soldiers fighting under the command of the Autobot leader, Jetfire. He was among the Autobots who launched in the Ark to clear a path through an asteroid belt. When the Decepticons attacked the ship, he fought a Seeker Decepticon while Jetfire sent the Ark crashing into Earth, knocking everyone aboard offline. Four million years later, they were repaired when the ship's systems were reactivated by a volcanic eruption. In the Transformers
Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He is love.
Not long after his resurrection, Optimus was alerted by Monitorus to an attack on Tau-Ursa. Optimus's impending speech was interrupted by a Decepticon attack led by Sixshot. Prime soon discovered that the attack was a diversion, while Galvatron tried out his Nullification Cannon on Cybertron's Energon supplies. Optimus rushed to the Energon plant, but, after clouting Slugslinger so hard that the Decepticon was left dangling over a precipice, Prime's morals forced him to rescue the Decepticon instead of stopping Galvatron from getting away.
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.
The other new additions were two black spring-loaded missile launchers that fire red projectiles. In vehicle mode, these attached to the soundbox (an echo of Powermaster Optimus Prime's cannons, perhaps), and could be held in Optimus Prime's fists in robot mode. These launchers were not created for Prime; they were retooled versions of the launcher from Barricade of the G.I. Joe line.
Based on his appearance in War for Cybertron, Generations Optimus Prime transforms from a red, blue, and silver robot into an "armored truck mode." He comes with a hand-held rifle that is held via either of its two 5mm posts, and can fold up to store in either mode. He features additional 5mm ports on his forearms, roof, and front-wheel panels. Optimus has a stylized sculpted Autobot insignia on his back, as seen in the game, but it is obscured by kibble.
Later, Orion Pax worked as an archivist in the Iacon Archives, and was friend to Ariel and Dion. Shortly after the trio encountered a group of time-traveling Aerialbots, the Archives were attacked by Decepticons, and Pax and Ariel were severely injured. The Aerialbots took them to Alpha Trion, who rebuilt them into Optimus Prime and Elita One respectively. Golden Age The Matrix of Leadership was passed to Optimus Prime following the death of Sentinel Prime at the hands of Megatron. The War Within During the war on Cybertron, Optimus Prime came to the aid of Getaway, Joyride and Slapdash, saving them right as the Decepticons Dreadwind and Darkwing were on the verge of destroying them. End of the Road
Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster, a Barrage cannon, two retractable energon blades that extend from his forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, and two retractable energon hooks that extend from his wrists. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.
A minor redeco of Beast Hunters Voyager Class Optimus Prime that has the gray parts cast in a darker plastic shade, lacks the black paint operation for the Star Saber's hilt, changes the color of the side windows' paint operations from yellow to green, adds yellow paint operations for the headlights and lacks the silver paint operations above the front windows.
The all new 2006-2007 Classics line featured characters from the original series in updated forms. Hot Rod (now called Rodimus due to trademark reasons) was in the first wave of Autobots along with Optimus Prime and Bumblebee. Due to most of the Classics lacking visible Autobot and Decepticon insignias, this figure lacks the distinctive Autobot symbol seen on the chest of all other versions of Hot Rod/Rodimus, to which fan companies have responded to with alternative stickers. His vehicle mode is based on an obscure Japanese Supercar, the Dome Zero, manufactured by DOME Co. Ltd in 1978.
Came with the Mini-Con Sparkplug. Could combine with Armada Jetfire (and its repaints) and/or Armada Overload (and its repaints). The trailer could convert into a base for Mini-Cons. In Japan a gold chrome edition of this toy was released as a Lucky Draw special. With its trailer the vehicle mode of this toy bears a great resemblance to G1 Star Convoy. According to the Armada video game Armada Optimus Prime is supposed to be 22 feet 10 inches tall (696 cm tall) and the toy is 17.5 cm tall. So that's a scale of 1:40.
Undeniably, the most iconic of Bumblebee’s alternate modes is his original: the small but always reliable classic yellow Volkswagen Beetle. It was evocative of his personality, always striving to go above and beyond what everyone perceived to be the limits of his size. These days, thanks to the Michael Bay live-action movie franchise, he’s known as a modern Chevrolet Camaro, which looks cool but as a strong muscle car deviates from his personality. At least it’s still yellow? Bay says he didn’t want him to be a Beetle anymore because there was already an iconic movie Beetle: Herbie the Love Bug.
Optimus includes an spring-loaded missile firing "ion cannon" modeled after Megatron's shotgun from Dark of the Moon, with the missile features a sculpted shotgun nozzle on the front section. It can be held in his hand or attached to the top of the truck cab or truck bed via 5mm post, and, in an unadvertised feature, sports tabs on the rear-most handle that allow the Dark of the Moon Voyager Class Megatron toy to wield it. Also undocumented is the fact that the weapon can be stored under either of Optimus' shoulders.
In the Japanese exclusive Transformers: The Headmasters storyline (which replaced the "Rebirth" finale in Japanese continuity), Hot Rod appeared as part of Optimus Prime's inner circle. When Galvatron and his Headmaster warriors launched a devastating attack on Cybertron, Vector Sigma was damaged, and Hot Rod was sent to Earth to retrieve the Matrix. Recovering it, he returned it to Prime, only to be surprised when the ghost of Alpha Trion once again reformatted him into Rodimus Prime to help Optimus. After Prime's second death, Rodimus once again took command of the Autobots. However, when Scorponok destroyed Vector Sigma, Rodimus decided to leave the war, and left Fortress Maximus in command of the Autobots.
After many battles on Earth, Optimus died by standing purposefully in the path of the Hydra-Cannon built by Megatron from the three Mini-Con weapons, the Star Saber, the Skyboom Shield, and the Requiem Blaster. He managed to partially reflect the beam, damaging the Hydra-Cannon. It was the Mini-Cons themselves, however, who resurrected him, entering the Matrix and reconstructing a new body for him. Subsequently, Unicron forced Optimus to face the dark part of his soul and that, on some level, he enjoyed the thrill of combat. Following Unicron's defeat, Optimus's denial was sorely tested as Galvatron, an upgraded Megatron, forced him into one final furious battle. The battle ended when Starscream sacrificed himself to end the circle of hate that powered Unicron. Floating through space, Optimus found the Matrix, but said he did not deserve it. Before beginning the battle with Galvatron, he was upgraded by the minicons. His red torso turned black and he was able to battle Galvatron one on one.
In "Human Error" Parts 1 and 2, Soundwave captures the Autobots with the help of his minions, Laserbeak and Ratbat, in order to brainwash them. Part of Soundwave's elaborate scheme consists of tricking the Autobots into thinking they have turned human. Optimus Prime's human form is a male caucasian in his early 20s wearing a red jacket. Sari forms a group of "Substitute Autobots" which consists of Scrapper, Wreck-Gar, and Snarl, to rescue them. They free the Autobots from Soundwave's control and Optimus grabbes Laserbeak to engage in a guitar vs. keytar battle with Soundwave, who used Ratbat. Optimus smashes Soundwave and Ratbat into pieces using Laserbeak in guitar mode, but Laserbeak grabs Soundwave's surviving components and flees.
Legends class Optimus Prime is an extremely simplified toy of the extremely complex movie design. As such, he features numerous unavoidable inaccuracies, such as not transforming or even looking very much like the original design or the larger toy versions in robot mode. However, proportionally Legends class Optimus Prime is not far off from the real truck and the Leader class toy's vehicle mode, aside from missing a smokestack on the driver's side. He is articulated at the shoulders and upper legs via ball joints. He can also hold small weapons, such as Cyberverse.
When Ultra Magnus, Rodimus, Arcee, and Spike took cover within the Autobot Mausoleum, retreating from an attack led by Galvatron, they found Optimus having risen from the dead! Rodimus returned the Matrix of Leadership to Optimus, only for Optimus to abandon his Autobots, and flee back to Cybertron. Optimus, it seems, has returned to the world of the living changed. Once on Cybertron, Optimus orders a full-scale assault on the Quintesson base. Thankfully, Optimus managed to come to his senses when his memories of being revived by the Quintessons reemerged. After returning the Matrix to Hot Rod and ordering the Autobots to retreat, sacrificed himself once more by guiding the ship he's piloting into the Quintesson's trap. Dark Awakening
Created with the specific purpose of producing an Optimus Prime as accurate to the original animated series as possible, the toy is exceptionally poseable, partially constructed from die-cast metal, features rubber tires and vacuum-metalized plastic and is heavily detailed, with sliding pistons in its joints and working spring-loaded suspension in vehicle mode. The figure also contains multiple non-intrusive gimmicks, such as a moving mouthplate to emulate Prime's traditional method of speech, flip-up communications panels on the forearms depicting images of Bumblebee and Starscream, and an opening, light-up Matrix chamber in the chest, which contains a removable vacuum-metalized Matrix of Leadership that can also be pulled open.
If Optimus instead followed Prowl’s plan, he instructed his troops to transform into vehicle mode and play dead. The Decepticons, believing the Autobots’ ruse, disarmed themselves in order to carry out the Autobots’ “carcasses.” Now with the element of surprise against unarmed opponent, the Autobots Transformed and were able to easily defeat the evil robots.
A five-inch tall, non-transforming highly-articulated PVC figure of Optimus Prime in his Super Mode was the eighth entry in Takara's Mega Super Collection Figure series. In addition to a non-transforming figurine of Sparkplug, Optimus comes with two sets of alternate hands—one set with spread palms, one curled into fists—and is armed with his Convoy Gun, which can either peg into his right fist (and only his right fist) or onto his back.
He now comes with a half-translucent gun which lights up and expands MechTech-style when the lever is pulled. Bizarrely, the main section of the weapon is sculpted to resemble Prime's forearm, with the unfolding part being his in-show gun. Additionally, he comes with an opaque sword resembling the Star Saber, which he can wield two-handed. The gun features a peg on its underside and a port on each side, while the sword features a peg and peg-hole on its hilt in addition to its 5mm handle. In robot mode, either accessory can mount on his hands, on either of his shoulders, or be pegged into either of his half-translucent forearms. In vehicle mode, the top of the vehicle mode cab can also fold back to reveal two additional peg holes, and there are three peg holes (including the fifth wheel hitch) on the back section, although the hitch tends to open up and not hold very well.
Transformers: Tribute Optimus Prime is a redeco of the 2007 Leader Class toy, to commemorate the 10th anniversary of the live-action film series. While the deco's paint mask is the same as the said figure, he features a more saturated blue and red, and chromed feet/front grills which was used for the MA-21 redeco, and he also features chrome on both sides of the stomach. While the Hasbro stock photo shows that his feet are slightly mistransformed in robot mode, the Takara stock photos shows his feet correctly flipped out.
This Optimus Prime is a new mold that matches the character's more cartoony and simplified appearance in the Q-Transformers: Mystery of Convoy Returns cartoon. The "Watashi ni ii kangae ga aru" added to his name means "I have a good idea" (私にいい考えがある). A line originally spoken by G1 Optimus Prime at various times in the Japanese dub of the original cartoon, it has a reputation as a catchphrase of his among Japanese fans and has been reused by many Optimus Primes since, including the Prime in the Q-Transformers cartoon.
This Optimus Prime is an extensive screen-accurate redeco of the Dark of the Moon Supreme Class/Leader Class Striker retool, using the Ion Blaster accessory from the Buster Optimus Prime and the Toys R Us Japan-exclusive battle blade accessories. He also comes with the Knuckle piece and the Battle Hooks and uses the 2-2-1 articulated fingers featured from the second Asia Premium Series release. He also features a Japanese language sound box for his voice gimmick, replacing Peter Cullen's "I am Optimus Prime" voice line.
He comes with a shield with a fold-out handle, allowing Optimus to hold onto it with either hand in robot mode. It has a simple transformation gimmick for vehicle mode which is activated by pressing a button at the top of the shield, causing the sides to spring outwards. In vehicle mode, the shield can be laid flat across the bed of the truck, attaching via a post on the back onto the truck’s trailer hitch. Alternatively, the bumpers on the shield can be rotated outwards, and the front can be bent down in order to form a new front end and hood for "battle vehicle mode", resembling the Stealth Force vehicle modes seen in Dark of the Moon.
A re-release of the Leader Class figure from the Revenge of the Fallen line, but with retractable forearm hooks (as seen in his battle with Grindor) in place of the blades. In addition, the figure comes with the unmasked head of Buster Optimus Prime and is painted with battle damage effects. A recording of Peter Cullen saying, "We must stop the Decepticons!" is played when his chest is pushed upward via a lever on his waist. Fans have nicknamed this figure "Battle Hooks Optimus Prime" to distinguish it from the other Prime figures.
LEGO® sets are not cheap toys. They are made to the highest standards and have the price to go along with it. However, in the past couple decades it seems that the price of LEGO sets has become outrageous. New sets can sell for up to $500 retail and old sets can sell for twice that in a secondary market. This is a children’s toy, right? There is no way LEGO sets have always been this expensive; it is just molded plastic. Let’s take a look at the history of LEGO pricing and try to figure out what is going on.
The back story of the Transformers on ancient Cybertron is told in Transformers: Defiance. In this story, Starscream returns to Cybertron after encountering an enemy scout ship in the Eshems Nebula. After being repaired for minor damage by Ratchet, Starscream and Ironhide report to Optimus Prime and Megatron. In issue #2, Optimus Prime is ordered by Megatron to counter-attack Cybertron's invaders, but instead, Optimus organizes a resistance to Megatron's decision. In issue #3, Optimus Prime, Jazz, and Prowl break into Megatron's quarters while he is away looking for clues to why he is acting so strangely. What they find is an ancient artifact that Megatron had restored.
The Transformers: Prime toyline hit shelves in November 2011. Originally, Hasbro played coy with the series receiving a toyline at all, emphasizing that it was a television series first and foremost. There were initial plans to release a small assortment of three Deluxe figures (Bumblebee, Arcee, and Starscream) in the Generations line before they were moved into the expanded "First Edition" launch line.
Megan Fulton, Tim Johnides, Jeff Williams, Dante Lauretta, Magnus Dahlsröm, Jayson Peters, David Michael, Gerry Tolbert, Andrew Smith, Ray Wehrs, Joel Becker, Scott Gaeta, Beth Kee, Joey Mills, talkie_tim, Danny Marquardt, Adam Bruski, John Bain, Bill Moore, Adam Frank, Lacey Hays, Peter Morson, James Needham, Matt Fleming, Adam Anderson, Jim Reynolds, Seiler Hagan, Bryan Wade, Petrov Neutrino, Jay Shapiro
Not depicted in the instructions or stock photos, Roller can attach to Prime in vehicle mode via two tabs on the vehicle front which slot into two corresponding slots on Prime's feet. Another undocumented feature is that the butt of the Ion Blaster can be inserted between the barrels of Roller's weapon mode to form a longer weapon. Also not shown in the instructions but depicted on the stock photo on the card-back is that Prime's shoulderpads can be rotated up; the intended positioning for this is notched, although you can position them at other angles.
He is designed with a removable head, biceps, arms, and legs, all of which use the same clip-peg/hole joint. This means his pieces can be swapped around in any order, as well as swapped with any other Hero Mashers figure... which includes figures from Marvel Comics, Star Wars, and Jurassic World, meaning you can make some pretty freaky combinations.
"Vibrant Red" Alternity Convoy is a redeco of the "Ultimate Silver" figure in the much more traditional red and blue Prime color scheme, representing the Optimus Prime of universal stream Primax 109.0 Beta. The figure was available simultaneously with the Ultimate Silver version, sharing the same packaging and pack-in materials, save for the color of the illustration on the front of the box, and a sticker that identified the figure within.
The instruction manual for the MP-04S Convoy Sleep Version reveals a hidden message saying that Rodimus will be the next installment in the Masterpiece series. Concept sketches of the figure were released online in July 2010. The figure is a faithful modern recreation of the original G1 toy. Gimmicks include retractable binoculars, spinning saw blade and the Matrix of Leadership, but the figure's main feature is the ability to transform into both Hot Rod and Rodimus Prime. The transition between the two incarnations involves rotating the face, extending the legs and adjusting the spoiler on the back.
An undocumented aspect of his transformation is that his gun, which splits in two halves and secrets inside his kibble when transforming (much like Rattrap's) has two handle pegs on opposite sides, so that it can be held either at its far end or halfway along its length. The former position makes the weapon look (charitably) more like his traditional ion blaster—or Ultra Magnus' rifle. Additionally, the gun halves can be plugged together in two different ways, theoretically allowing you to create an infinitely long weapon (or at least one of ridiculous proportions).
This figure is an exclusive to San Diego Comic-Con 2011. The toy comes in a packaging shaped like the Matrix of Leadership, which one could wear around their neck, preferably at the convention itself, so passers-by can exclaim "WHERE THE HELL DID YOU GET THAT?" and then try to get one themselves. The Matrix itself comes packaged in a box that is designed to look like Optimus Prime's chest, and opens accordingly. The chest window doors are sealed with a round magnet.
If Optimus led his troops back to the Decepticons’ poison lab, the convoy happened upon the Decepticons hauling barrels of poison out of the poison lab. Windcharger and Ironhide suggested two different plans to Optimus: Windcharger wanted to use his magnetic powers to cause a confusion, while Ironhide wanted to simply go in for a full frontal assault.
Alternity Convoy transforms into a 1:32 scale Nissan GT-R, featuring die-cast metal parts, an opening hood, trunk and doors, as well as an interior, complete with his feet and thighs being sculpted to form the back seats. This complex figure stands at 6.5" tall, and is armed with a pair of blasters on each arm. In the hyper-dimensional world of the oft-confusing Alternity fiction, this figure specifically represents the Optimus Prime of universal stream Primax 903.0 Beta.
The 1986 line featured another significant change in that many, if not the majority, of the toys were conceived as futuristic vehicles and bore little resemblance to present-day machinery. This was due to changes in the movie and television series, which leaped ahead twenty years to the year 2005. Many have speculated that this change might have been what signaled the beginning of the end for the Transformers, as part of the novelty of the first lines was the realistic vehicles that turned into robots.
At some point, Rodimus learned that the world known simply as Planet Q was under threat from the world-devourer, Unicron, but arrived too late to prevent its destruction. Years later, however, he encountered the planet's surviving ruler, Alpha Q, and sided with him in his plan to use Energon to regenerate and restore all the worlds consumed by Unicron – a plan that put him in opposition with Optimus Prime when they encountered each other once again. When Megatron succeeded in reactivating Unicron, however, Rodimus relented and submitted himself and his troops to Optimus Prime's command, and they were integrated into the main Autobot force as the battles continued to defend Alpha Q's successfully-regenerated worlds against the Decepticons.
In 2002, 3H secured the official Transformers convention license as well as licenses to produce comic books and start a fan club. Optimus Prime appeared in Transformers Collectors Club comics, a comic released by 3H enterprises. In the comic, he is the same Optimus Prime from the Robots in Disguise continuity, but is taken to the Transformers: Universe reality.
The Japanese release of the figure also underwent the changes in weapon shapes, but never featured a silver Roller; instead, their original release of Prime featured a Diaclone-style Roller without the two rear pegs, and the differently-shaped launcher that accommodated him, before a running change switched over to the Hasbro version of the mold. Finally, in some European countries, Prime sported red feet, as opposed to his traditional blue; this version of the figure is also known in some cases to feature a differently-painted forehead crest which leaves the three central indentations unpainted blue.