Featuring a complex transformation, essentially the front and back ends of the truck fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his pricepoint has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, held in place by a simple clip.) Optimus' final Automorph, located in his torso, is activated by flipping the silver lever on his stomach activating a series of spring-loaded actions where the truck windows are pushed apart, and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
The TakaraTomy release of Optimus Prime has considerable differences from the Hasbro release. His blue and red plastics are darker and metallic, his translucent blue plastic is darker, and a few of his paint operations have been omitted and replaced with customer-applied foil stickers, such as his shins, feet, headlamps, and insignias. His legs, outer forearms and truck mode "sleeper cabin" side panels have been retooled to include 5mm post-holes as part of the line-wide "Arms Micron" gimmick. As such, he does not come with the Hasbro version's weapons, but instead an Arms Micron partner named O.P. who transforms into a weapon resembling Optimus's in-show blaster cannon. This version of the mold was also used to make Prime Nemesis Prime.
If the Autobots went along with Prowl’s strategy, the resulting heat from the explosion caused the Autobots’ circuits to overheat, rendering them unconscious. Upon reawakening, the Autobots found themselves captives of Megatron, who informed them that their fellow Autobots would soon perish, and that the humans would be conquered by the Decepticons shortly after.

This Japanese-exclusive black-and-gold redeco of First Edition Voyager Class Optimus Prime was available exclusively at the fourteen stores taking part in the Cybertron Satellite promotion. It depicts Prime coated in an alloy reverse-engineered by Ratchet from MECH equipment that protects Optimus against Dark Energon and other techno-biological hazards.


Labeled as a "Triple Changer", Striker Optimus is a redeco and retool of Dark of the Moon Supreme Class Jetwing Optimus Prime, with new weapons. The base figure has most of the same mold changes as Jetwing Optimus Prime (see below), but has been altered further; in particular, the transforming smokestacks and fuel tanks/ion blaster parts have been replaced with retooled regular tanks that now function as mounts for the new accessories. The colors on the toy are darker than Jetwing Optimus, with a different flame deco that extends farther along the sides of the toy. Additionally, two new 5mm holes have been added to the gray hinge behind the cab in order to accommodate the Toys R Us Japan-exclusive battle blade accessories. The "I am Optimus Prime" saying of Buster Optimus Prime has also been replaced with the "We must stop the Decepticons!" saying of 2010 Transformers Optimus Prime, although batteries are not included.


He resembles previous Optimus characters in robot mode: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.
Arms Master Optimus's "Space Blaster Mode" is a mode designed for fighting in outer space, introduced in the Cybertron Satellite segment of "Infinite Transformation! Multiplying Enemies". He wears R.A. and Shining R.A. on his shoulders as wings, C.L. and C.L. GR on his back as thrusters, and B.H. and B.H. B on his feet as... more thrusters. His weapon of choice in this mode is the Matrix Blaster.
Micromasters teams have teamwork ratings instead of ranks. Unlike the other ratings, teamwork seems to be split along faction lines, with Autobots typically holding higher teamwork ratings than Decepticons. A second unique spec value, Cooperation, replaced the Firepower rating used on individuals' cards. The traditional order (as above) was also abandoned for the Micromaster team specifications.

Unite for the Universe Optimus Prime would have been a redeco of the 2007 Optimus Prime Voyager-Class mold in a similar style to the Leader-Class Buster Optimus Prime (see below), with a much more accurate and detailed paint scheme, including white stenciled flames. He would have come with a set of Jetfire armour parts to form the powered-up Optimus Prime seen at end of Revenge of the Fallen, and due to not having to form Jetfire's robot mode or his jet mode, the armour parts are far more accurate to the movie's design of them than the leader class Jetfire toy could manage. While not combined to Optimus Prime, the armour can be arranged to form a sort of weapon emplacement mode or a jet engine on the back of Optimus's vehicle mode.
Part of the eighth wave of TakaraTomy Go! toys, Optimus Exprime is capable of changing from a robot to either a train or (something resembling) a dragon and back again. He can also form the torso of either DaiKenzan (with Kenzan forming the upper torso, head, and arms and Gekisoumaru forming the legs) or DaiGekisou (With Kenzan and Gekisoumaru reversed from their roles in DaiKenzan).
This is a weird one. Back in the late-’80s, the original TV show had ended and Marvel Comics decided to take the “transform” part of the property a step further and gave a handful of Transformers an organic, human-looking shell. Bumblebee was one of the lucky Autobots to get one. According to the storyline, the Decepticons developed the technology first, but the Autobots secretly caught wind, made their own human shells, and fooled the bad guys into thinking they were fighting mere humans, until they burst out of their shells.
3. Licensed themes: In the 80’s the Lego sets were more generic and interchangeable among themes. There were the basic Space, Town, Castle themes. The color schemes within a theme were more homogeneous (i.e. Blacktron sets or Mtron sets all had a common color scheme). Since there was no “fictional” real life object being copied, piece selection tended to emphasize versatility over “realism”. Almost every Lego set of the past had pictures of alternate models featured on the boxes and instructions that was meant to inspire a child to not just build the model featured in the instructions, but to embark on the mental challenge of making their own creations.
A Leader class toy that transforms from fire truck to robot. The front end of the fire truck can form a robot resembling Generation 1 Prime, while the rear section can form a battle station or combine with him to form Super Fire Convoy. The rear section has an extending ladder with retractable water cannons and missile launchers. This battery-operated toy features siren sounds and voice samples of Fire Convoy (saying the lines, "Fire!" and "Kyoudai Gattai! Super Fire Convoy!").[41] Fire Convoy can combine with God Magnus (sold separately) to form God Fire Convoy.[42] This toy was designed by Takara's Hisashi Yuki.[43]
In Transformers: Armada and Transformers: Energon, Optimus Prime shares the role of main protagonist with Rad, Alexis, Carlos, Starscream and Hot Shot. The Optimus of this universe shares many similarities with his parallel universe versions, including nobility of spirit and a strong desire to protect all humans on Earth. In this continuity, the two sides are not looking for energon, but a small race of power-enhancing Transformers known as Mini-Cons. Optimus led his small band of Autobots to stop Megatron from acquiring their power for himself.
Kiss Players Convoy is a redeco of Alternators Optimus Prime. While the figures may appear similar at first glance, given that Kiss Players Prime is still red, blue and black, there are many subtle differences, not least of all the replacement of the Alternators figure's bare, flat red plastic with a deep metallic red paint. Several of his body parts are cast in different colors of plastic (for example, his shins, formerly black, are now blue, while his formerly-blue hands are now black), and he features more intricate paint applications on his shoulders, and especially his pelvis, which is decorated to look like Prime's traditional bumper.
Like the larger First Edition figure, you can actually separate the robot mode from his vehicle shell, displaying both of his modes at once... albeit unlike the First Edition figure, this tweak could sacrifice the even stability between those two separated figures. Some of the pieces like the legs/rear wheels are particularly difficult to separate.
If Sparkplug suggested that the Autobots remained in their vehicle modes, he would concoct a plan where the Autobots would help evacuate the entire town in their vehicle modes. With no more than four trips in and out of the city, Optimus and the rest of the team carried out the plan without incident. The Autobots then transformed and engaged the approaching Decepticons, whom they easily dispatched. With the city safe, the Autobots moved out to help their comrades at the Decepticon fortress.
This Classics Optimus Prime is a smaller, deluxe-class toy bearing a greater resemblance to the original G1 toy. He was only available in a special Versus pack with a similarly unique Classics Megatron toy and later the FAB version of the 2007 movie Prime. Later releases of this toy had him individually packed in some European countries. His vehicle mode and robot mode is based upon the original toy, but due to limitations in design, budget and gimmick, does not succeed very well. His thighs cannot collapse into his lower legs, meaning they are exposed in vehicle mode, as is his head. Although to be fair, you wouldn't really notice the leg thing if he had a trailer. But, he is greatly articulated.
In Transformers: The Last Knight, he is brother-in-arms with Bumblebee who he fought alongside with to foil the Nazi Party in World War 2. He speaks with a thick French accent due to being stuck in France for so long, much to his own embarrassment. He wields a special gun which can briefly slow down time. He is also the only Transformer who is shown to speak in vehicle mode. [20][21]

There may be two things you didn’t know in this one: 1) Bumblebee is in the Transformers Hall of Fame; and 2) There’s a Transformers Hall of Fame. The shrine to all things Transformers was the brainchild of Hasbro, the American toy company that worked with Japanese toy company Tomy to create the Transformers in 1984. Starting in 2010, they wanted to honor not just popular characters, but also the real people behind the toys, TV shows, comics, and films.
So as a MOC builder, I have found that I tend to design MOCs on LDD and acquire parts as needed for each MOC from bricklink. I now tend to pass on licensed themes. I am especially turned off by the rehashing of many of the Star Wars vehicles. Sets that I buy tend to be Creator sets for my kids or the occasional “special edition” set that appeals to me such as the Sopwith Camel set.
Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces.

Another thing different now from when I was a kid (70s/80s) is that the sets contain much fewer basic bricks. It seems the models are made out of all these exotic specialized pieces which are less useful for general building. Is this a business strategy to sell more sets by reducing the reusability, a marketing ploy to sell more pieces by making every set include unique collectable parts, or just trying to make the models look more realistic/slick? I think Lego was more fun when the majority of bricks were basic.

The price per minifigure has definitely gone up in the past 5 years. You used to be able to get 4 minifigs (along with some other stuff) at the $9.99 price point, now these are $12.99. And there are fewer minifigs in most $19.99, $29.99, etc. sets now. Lego Minifigures Series 1 was $1.99 each, subsequent series $2.99 each – I know it’s supply and demand, but it still feels kind of exploitative. I admit the cleverness of the builds keeps improving though.

Part of the first wave of Age of Extinction Custom Kreons, this Optimus comes with a buildable parts rack on which to hang/store his many many extra pieces. His "normal" helmet and blaster are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens) plus a spare hand, as well as a buildable battle-axe, a buildable smokestack-pack, and an extra Wheeljack-style wing-pack.
Available exclusively from Japanese clothing company A Bathing Ape in 2014, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a green color scheme matching the Convoy Reissue BAPE Ver. of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.

Yet another Reveal the Shield redeco with the Motorbreath retooling, Convoy is cast in clear red and black plastic. He has been retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock. Convoy was available at a variety of 2014 events, including on May 3 at a "Kids Walk" event at Fuji Speedway, in special packaging on May 16 at the "Transformers Celebration 2014" midnight event at the Sunshine City Toys"R"Us store in Ikebukuro, on June 15 at Tokyo Toy Show 2014, at the Aeon Mall in Kasukabe on July 19, and at the "Transformers Expo" event in Yokohama on August 9. Convoy was also available as one of three preorder bonuses for Cloud Roadbuster.


In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.
×