Transformers: Tribute Optimus Prime is a redeco of the 2007 Leader Class toy, to commemorate the 10th anniversary of the live-action film series. While the deco's paint mask is the same as the said figure, he features a more saturated blue and red, and chromed feet/front grills which was used for the MA-21 redeco, and he also features chrome on both sides of the stomach. While the Hasbro stock photo shows that his feet are slightly mistransformed in robot mode, the Takara stock photos shows his feet correctly flipped out.
A Supreme sized version of Optimus Prime, based on the Voyager class figure design.[153] When pushed forward, the upper torso spins and transforms, with the transformation sound indicating the completion of the process. The right arm has an axe-swinging action while the left arm has a punching action. Includes show-accurate battle axe that features retractable blades and a spinning jet flame. Also features sound effects and pre-recorded dialogue ("My name is Optimus Prime!", "Let's go!" and "Bring it on!"), as voiced by David Kaye.

Prime got his own rap segment. He was seen in his "Combat" toy body, waiting for Megatron as he attacked a human subdivision. Prime converted to robot form, blew up Megatron's weapon at point blank range, and slugged it out with him. Apparently emerging victorious, he was next shown sitting next to an identical truck, which kid mistook for the real thing. The real Prime then transformed and picked up the kid, inspecting the human with his cold, lifeless, flashing red optics. Combat Heroes commercial
Like the original Warrior Class Optimus Prime, the figure features an undocumented feature: His axe can be stored on his vehicle mode trailer. Additional features include storing the axe onto either of his leg hooks, combining the launcher with either of the swords at their hilt, and storing the launcher underneath the vehicle. In a neat bit of engineering, he can fully transform with his swords attached.
Takara's release of Optimus Prime the following year made a few changes, noticeably replacing the gold paint and plastic of the Hasbro toy with bright yellow and much brighter gold. The deco has been tweaked to be a bit closer to the original prototype glimpsed in early catalogs, with yellow added back to cab Prime's feet and the cab grill painted silver, and the Super Mode's waist getting much more paint. This version of the figure was never burdened with the mobility-inhibiting shoulder tabs. Completing the Super Mode combination triggered a new clip of Prime shouting "Convoy, ready for battle!" in Japanese instead of generic mechanical sounds. Late in the run, JUSCO stores offered this toy with blind-packed "Space Galaxy" versions of the individual Destruction Mini-Con Team members, one toy per box.
"Optimus Prime Figure" (オプティマスプライム・フィギア)[1] is a redeco of 2001 Robots in Disguise Spychanger Scourge, painted to resemble Movie Optimus Prime. Of note is the tampographed detailing on his chest resembling Movie Prime's distinctive chest design. Like most Spychangers, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly.

Optimus Prime grew concerned when Hound picked up a communication from Laserbeak that indicated the Decepticons had grown interested in a mysterious structure near a human village. Prime and a team of Autobots headed out to investigate, and they battled the Decepticons over the structure, which turned out to be a harmless windmill. Laserbeak's Fury
Standing only two-and-a-quarter inches tall, Smallest Transforming Transformers Optimus Prime was the smallest fully transforming G1 Optimus toy for a while, at least until the release of his chubby super-deformed Q-Transformers versions. He features an accurate transformation sequence based on the original full-sized toy, replacing the detachable hands with actual sculpted fists, and even including a tiny version of his laser rifle. Unsurprisingly, he also has little articulation and is only capable of moving his arms and legs.

The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.[6][7]
Late in 2008, this version of Optimus prime was one of four Classics figures repainted into HasbroToyShop.com exclusives (the other three being the Megatron from this set in G1 colors, Grimlock repainted into Overkill, and Mirage repainted into Dragstrip). Unlike those three, it's debatable just how much repainting went into Optimus, but he comes in a snazzy new box.

This Optimus Prime is a redeco of the figure above, featuring red wheels and various Tech Spec-sque patterns on the legs & chest which can be decoded with their transparent red weapons, which is molded in a sprue similar to the ones used for the Arms Microns kits & Robots in Disguise (2015) Mini-Con figures. He can use any weapons included in this set, although his primary weapon is an axe.
I mean you could argue that they are returning to the way the original Transformer toys worked. Here is an example of the OG Optimus toy. I went to Hasbro's website to see what the most current version of Optimus is that they are selling and I found this. That actually looks surprisingly similar, though I would argue they have gone more of the direction of making the robot look more robotic and the truck a little less truck like but its still a solid middle ground.
Available exclusively at Hasbro Toy Shop and their booth at San Diego Comic-Con 2011, this version of Ultimate Optimus Prime is presented in vehicle mode, packaged into a large, foil-embossed bubble packaging (similar to late Alternators packaging) styled after Optimus Prime's trailer, with an additional foil-embossed sleeve styled after the hood of Optimus Prime's truck. Exclusive to this release is a set of stickers one can apply to the trailer. The toy itself is otherwise identical to the regular retail release.
For all the positive aspects, these changes are not without their drawbacks. The LEGO community has been crying foul over the perceived decline in quality of the bricks5. While nowhere as bad as their competitor, any decline in quality reflects poorly on a company known for quality control. The LEGO group has been expanding its manufacturing base to places outside of Denmark, into Mexico, the Czech Republic, and China (although so far it seems only their “signature brand” non-set items are made in China). LEGO claims that this has not changed their dedication to the quality of standards by which they abide. However, it seems that the molds have changed to reduce plastic6.  Whether or not this affects the durability of the bricks is yet to be seen.
1· To calculate the average price per piece in a year, I took the price per piece of each set made that year, multiplied it by the number of pieces in the set and then averaged all the weighted prices. I used a weighted average because when we are looking at the price per piece we are essentially saying we could buy x number of pieces for y dollars. Larger sets tend to have a lower price per piece so in effect you could get more pieces at that lower price that year. Note: this was done using US retail price data from Brickset.
In the event that Windcharger successfully turned the Decepticons’ forcefield off, reinforcements burst into the base just as Megatron was strike Optimus from behind. A wayward shot from Megatron then revealed the location of the gravity gun to the Autobots. Optimus ordered his troops to charge the weapon. Hook caught Optimus in the gravity gun’s sights, and sent the Autobot leader floating upwards.
For many, it may seems that the advent of licensed sets3 correlates with the perceived increase in prices. The 1990s and before were a nostalgic heyday of affordable LEGO sets. This is not quite true. Below is a chart that compares the price per piece of licensed sets and unlicensed sets starting in 1999. 1999 is the first year that LEGO had major licensed themes.
Optimus Prime was given the Matrix by Primus himself, and used to be friends with Megatron. Prowl is his closest friend and Ratchet is his oldest. Searching for Energon, the Autobots landed on Earth, but were followed by the Decepticons. With the help of their human allies, they bested their foes, and knowing they would return, decided to stay and wait to defend the planet once more. Optimus Prime was proud to be an Autobot. I Am Optimus Prime

After the events of Transformers Animated the Stunticons set up a Stunt Convoy show in the city of Kaon and use it as cover to attempt to break Megatron out of his detention at Trypticon. Their attempts are thwarted thanks to the efforts of Cheetor, Optimus Prime, and Sideswipe. The Stunticons are placed in detention with Megatron and an attempt to rescue them was made by the Decepticons Blot, Mindwipe, Oil Slick, Scalpel, Sky-Byte, and Strika.[143]
Jetwing Optimus Prime is a retool of Revenge of the Fallen Leader class Buster Optimus Prime, with an accompanying large jet pack and massive dual Gatling Cannons. The base Optimus Prime figure has several modifications including: a new stomach area and elbow flares to reflect the changes to Optimus Prime's CG model in Dark of the Moon, modified lower arms to incorporate MechTech ports and clips for the cannons, and a retooled area under his back so the jet pack can fit on more securely. The dual energon blades mounted on his arms have been removed. The toy retains Buster Optimus Prime's electronics, but batteries are not included.

The Autobots subsequently returned to Cybertron aboard a refueled and repaired Ark with the defeated Decepticons, taking the Decepticons on Cybertron unawares and quickly capturing control Cybertron. Peace reigned for a time until a series of natural disasters began, the source of which was determined to be the planet Moebius in a parallel universe. The Autobots assembled a team to travel to this alternate universe and stop the threat; Optimus Prime personally led the team, unwilling to put anyone in more danger than himself. Wheeljack, Hoist, Jazz, Prowl, and Silverstreak constituted the rest of the team; they dubbed themselves Spy Changers because they aimed to achieve their goal with stealth and diplomacy. The team modified their bodies to match the native cyborgs using data acquired from the Sky Spy and traveled to the 22nd Strata but were soon attacked by the local Guardians, who mistakenly presumed them to be Renegades. The Spy Changers were then rescued by the real Renegades, who presumed them to be potential allies and took them back to their flagship, the Rogue Star. Renegade leader Cy-Kill attempted to court the Spy Changers as allies, but Optimus saw through Cy-Kill's deception. Eventually, the Autobots formed a secret alliance with the Guardians as well as discovered the cause of Cybertron's troubles: Renegade bases on Moebius were draining the planet's energy. The planet's geometry had turned it into a crude Dimensional Interfacer, and Moebius was tapping into Cybertron to sustain itself. Hoist was able to end the crisis by triggering the bases' remote detonation sequence. Cy-Kill was furious, but in the ensuing battle, the Autobot-Guardian alliance triumphed over the Renegades. Optimus Prime and Leader-1 shook hands as a symbol of the transdimensional friendship, and the Autobots returned to their home reality, secure in the knowledge that they had allies in places as distant as alternate realities. Ask Vector Prime, 2015/09/30
1· To calculate the average price per piece in a year, I took the price per piece of each set made that year, multiplied it by the number of pieces in the set and then averaged all the weighted prices. I used a weighted average because when we are looking at the price per piece we are essentially saying we could buy x number of pieces for y dollars. Larger sets tend to have a lower price per piece so in effect you could get more pieces at that lower price that year. Note: this was done using US retail price data from Brickset.

In just seven years, from 1997 to 2004, the number of elements in the company’s inventory exploded, ascending from slightly more than 6,000 to more than 14,200. So did its range of colors, which climbed from the original six (red, yellow, blue, green, black, and white) to more than fifty. As the number of components and colors mounted, soaring supply and production costs plundered the company’s bottom line. Here’s why.


A redeco of Legends Optimus Prime replacing his red plastic with more blue and silver, but sprucing things up a bit with red flame paint operations. Defender Optimus Prime (ディフェンダーオプティマスプライム) was only available in Japan as part of their Transformers Animated promotion in March 2010. It was given away for free to customers who purchased Animated merchandise at Edion, Bic Camera and Yodobashi Camera stores.
Then he dreamed of awakening, only to find his troops smashed. Realizing his only hope for survival lay with Cybertron, Optimus then boarded the ship the Autobots were repairing, and travelled back to his home planet. Arriving on Cybertron, he found it completely under Decepticon domination. Optimus then met an old Autobot codger who pleaded that he return to Earth to gather a force that could overthrow the Decepticon’s regime. Optimus remorsefully told the old Autobot that there could be no reinforcements from the planet Earth. The two Autobots were then swarmed by Decepticon police officers, who Optimus fought until his dying breath…
Optimus Prime appears in the Transformers live-action film series as the leader of the Autobots and one of the main protagonists. In the first three films, he is able to transform into a conventional Peterbilt 379 cab, rather than the cab over design of his original Generation 1 body. In Transformers: Dark of the Moon, he gains a first generation-style trailer form before changing into a 2014 Western Star 5700 Concept.[29] Also straying from the G1 design, Prime's vehicle mode is now decorated with red flames painted onto a blue body à la Rodimus Prime, his Generation 1 successor. The reason for the change was due to Director Michael Bay's decree that mass displacement does not occur when they transform, requiring Optimus's vehicle form to have more mass to achieve the desired size in his robot form.
This Japanese-exclusive black-and-gold redeco of First Edition Voyager Class Optimus Prime was available exclusively at the fourteen stores taking part in the Cybertron Satellite promotion. It depicts Prime coated in an alloy reverse-engineered by Ratchet from MECH equipment that protects Optimus against Dark Energon and other techno-biological hazards.
Optimus foiled Megatron's attack on 21st century Tokyo after informing his old foe that wherever he would pop up, the Autobots would be there to thwart his evil intentions. Henkei! Henkei! volume 1 Optimus and Bumblebee later intervened when Astrotrain attacked Shinjuku Station, using their bodies to shield nearby humans from the destruction the triple-changer brought about. They were unaware that Astrotrain's rampage was really a distraction staged to keep their attention away from Megatron's gathering of energon cubes nearby. Henkei! Henkei! volume 2 Optimus continued to do battle against Astrotrain until Rodimus showed up to provide the Autobots with additional firepower. Henkei! Henkei! volume 3
 • Optimus Prime  • Rodimus  • Ultra Magnus  • Alpha Trion  • Arcee  • Blaster  • Blurr  • Brawn/X-Brawn  • Bulkhead  • Bumblebee/Goldbug  • Cliffjumper  • Elita One  • Hoist  • Hot Shot  • Hound  • Ironhide  • Jazz  • Jetfire  • Kup  • Metroplex  • Mirage  • Omega Supreme  • Perceptor  • Powerglide  • Primus  • Prowl  • Ratchet  • Red Alert  • Sandstorm  • Smokescreen  • Seaspray  • Sentinel Prime  • Sideswipe  • Springer  • Wheeljack  • Wheelie  • Wreck-Gar
This Japanese e-Hobby exclusive is a redeco of Targetmaster Kup, made to represent the character Orion Pax from the cartoon episode War Dawn. He transforms into a Cybertronic pickup-truck thing. His truck bed has a peg-hole to mount his partner Barrelroller, who also serves as a hand-held weapon. The set also came with a re-deco of Wheelie as Dion.
The earliest version, as shown in the first patent application for the toy, was to have the Prime cab be a triplechanger, turning from truck cab to jet or robot[3]. The nosecone of the jet and robot legs were released by the Powermaster lock in the same fashion as the legs in the final version. Optimus would have had winged arms in non-super robot mode. The super robot mode's head was also integrated into the trailer's hitch... and lacked a faceplate.
Optimus was able to rally Autobot factions from across Cybertron to the cause and launch an all-out attack on Shockwave's fortress. He headed the assault himself, but broke rank when he saw the image of Shockwave blasting Ultra Magnus upon one of the many monitor screens planted around the Decepticon's headquarters. Optimus charged in to confront Shockwave, beating down all opposition along the way. Coming upon Shockwave's throne room, Prime was greeted by Ultra Magnus, who pointed him towards a secret passage through which Shockwave had absconded. Leaving his wounded brother to rest, Optimus barged into Shockwave's secret chambers, only to be overpowered and have the Matrix ripped from his chest. With it, Shockwave was finally able to activate Vector Sigma. Countdown to Extinction Stalling, Prime listened as Shockwave recounted the history of Cybertron, and eventually Ultra Magnus arrived, having recovered, to attack and defeat Shockwave. Prime and Grimlock helped him escape from the fortress as it crumbled to the ground. With Shockwave's defeat, the Autobots would now be able to start rebuilding Cybertron towards true peace... but Optimus remained troubled by Shockwave's motives; he recognized that Shockwave would not be urged to action by mere fancy. Optimus pondered what greater threat awaited Cybertron for Shockwave to so thoroughly plan for its arrival. Revelation The injuries Prime took in this conflict necessitated a prolonged restoration period in stasis. Both he and Ultra Magnus were tended to by Perceptor and Hoist as they recuperated. Generation 1 #0 Though Magnus recovered in due course, Optimus's systems had received a more severe shock due to the Matrix being forcefully removed from his frame. Thus, he needed additional time spent in recovery before he could reboot. Black Sunshine

Mission Racer Optimus Prime features a pull-back gimmick by using a rubber band: insert the rubber band onto the front and rear post, then place Optimus Prime onto the ramp and pull his trailer backwards, and release the trailer for allowing the truck to zoom forward. The rubber band also has Optimus Prime's name and the Autobot insignia tampographed oh it.
This new roughly 11-inch leader-sized mold of Optimus Prime transforms from a robot to trailer/truck combination and back, with the transformation taking cues from both the Reveal the Shield Legends Class and the Robots in Disguise Legion Class toys. Surprisingly, he does have a reasonable amount of articulation, including a balljointed head and hinged joints for his arms, shoulders and legs, plus lateral hinges for his feet. His head includes light-piping and, unlike other Cyber Series toys, his truck windows have actual transparent plastic rather than just being merely painted.
ROBOTKINGDOM.COM Newsletter #1462 Hi, Here is a quick update from www.robotkingdom.com.  #1 Hot Items! Flame Toys : Transformers Star Saber. Preorder. Available in May 2019. US359.90 http://www.robotkingdom.com/ftstarsaber.html Flame Toys [Furai Model] - Bumble Bee. Preorder. Available in May 2019. US44.90 http://www.robotkingdom.com/4897054512308.html Takara Transformers Masterpiece MP-34 Masterpiece - Read More

Part of the first wave of Transformers: Robots in Disguise Hyperchange Heroes, Optimus Prime transforms from a futuristic trailer truck to robot in just 3 easy steps! His arms & legs serve as his trailer, while his chest serves as his truck front. He is also one of the few Robots in Disguise Optimus Prime toys which does not feature a faux window chest in robot mode. Both of his arms are articulated with 5mm holes in each hand.
A giant statue of Optimus Prime in front of the Cybertron Archives holding two Golden Disks appeared on Cybertron in the Beast Machines series, but was destroyed by the Vehicons in the episode Fires of the Past. When show writer Bob Skir was asked what these two disks were he said that neither the statue nor disks were in the script, but he suggested that they were either the disks from Voyager 1 and Voyager 2 probes or that Optimus won them in the 2,395,989th Annual Cybertronian spelling bee.[7]
This new roughly 11-inch leader-sized mold of Optimus Prime transforms from a robot to trailer/truck combination and back, with the transformation taking cues from both the Reveal the Shield Legends Class and the Robots in Disguise Legion Class toys. Surprisingly, he does have a reasonable amount of articulation, including a balljointed head and hinged joints for his arms, shoulders and legs, plus lateral hinges for his feet. His head includes light-piping and, unlike other Cyber Series toys, his truck windows have actual transparent plastic rather than just being merely painted.
A redeco of Cybertronian Optimus Prime with a translucent red front section, additional (painted) "scratched paint" details, some red paint highlights either omitted or changed to yellow and additional yellow circuitry pattern detailing reminiscent of the jammed abilities/mode lock/EMP effect from the War for Cybertron game, available in a Toys"R"Us-exclusive three-pack with redecos of Cybertronian Megatron and Cybertronian Bumblebee.
Released as part of the Bumblebee Energon Igniter's Speed Series line, this Optimus is a Legends/Legion-sized mold that transforms from robot into a Cab-over truck with the transformation scheme shared with the Transformers (2010) Reveal The Shield Legends Class toy, and he features 3mm compatible hands. Optimus' truck mode can also be attached with the Energon Igniters core, and due to the toy being lightweight, it can propel his vehicle mode forward very quickly, making him a fast-moving truck. Due to its simplified transformation, Optimus' robot shoulder parts ended up sticking out from his truck mode, and his upper cabin panel ends up being integrated with his head. Unlike most Speed Series toys, his Energon Igniter port is ends up under his right foot in robot mode rather than on his knee.
The third version [18] would quite possibly have been the most gimmick loaded Transformer in the history of the line, simultaneously being a Powermaster, Headmaster, and Triple Changer. The Headmaster also would have been a Triple Changer, turning into a sort of armored four-wheeled rover (Roller II?) and robot as well as a rather silly looking Optimus Prime head with four vertically aligned wheels jutting off the sides. It seems that when the extra Headmaster gimmick was scrapped, the super mode head remained separate rather than being reintegrated into the trailer hitch such as on the earliest design. Notably, the body of this design is extremely close to the final design.
This silver-chromed redeco of the Leader-class Optimus Prime figure first saw the light of day as a prize in a TV Magazine mail-in, offered alongside a gold chrome version of the same toy (see above). Both figures were later made available again as prizes in a second contest in the September 2005 issue of TV Magazine, together with "Galaxy Convoy Custom Color Version" (see below). Despite being offered in equal quantities in these contests, this silver version is apparently much harder to come by.
In the event that Windcharger successfully turned the Decepticons’ forcefield off, reinforcements burst into the base just as Megatron was strike Optimus from behind. A wayward shot from Megatron then revealed the location of the gravity gun to the Autobots. Optimus ordered his troops to charge the weapon. Hook caught Optimus in the gravity gun’s sights, and sent the Autobot leader floating upwards.
There is one aspect not looked at in the price and that is the shift to model building vs. creation leading to a change in the utility of the pieces. I seem to need many more sets to get a useful variety of pieces these days as many of the sets contain a lot of pieces that are very specific to the needs of the set and are less useful when one wants to create their own designs. It would be a fascinating addition to rate each of the block types on its utility, perhaps by its prevalence in other sets, and then assess each set on its total utility score. So then the question is how many sets would you need to by to achieve different levels of utility and how has this changed over time.
Power Surge Optimus Prime's scannable Autobot insignia is on his robot mode left shoulder. As he's packaged in robot mode, this badge is easily scannable while still in-package. Like his wavemate Bumblebee, this figure eventually saw release in the 11th wave of the Warrior Class line with the "Combiner Force" packaging. His scannable sticker is also altered, but scanning the badge only unlocks Energon currency, but not the character. This also applies to the original release's badge, but it unlocks 8 Ultra Sparks instead.

As yet another in an increasingly large number of reissues of the original Generation 1 Optimus Prime toy, this entry in the Japanese-exclusive The Transformers Collection line of reissues added a few extra goodies to spice things up. Chiefly, the figure was armed with a new energon-axe, based on the weapon used by Prime in the Generation 1 cartoon episode, "More than Meets the Eye, Part 2", which plugs into either of the headlight-holes that normally accommodate Prime's fists. Additionally, Prime came packaged with a ring binder folder designed to hold the pull-out character file sheets that were included with all the other Transformers Collection reissues. Notably, this figure reinstated the original, thick version of Prime's rifle as the standard for all future Japanese reissues.


This highly accurate model kit of Optimus Prime is a Japanese exclusive. It is extremely possible, and comes with his two swords that can be mounted either on his fore-arm, or the hand can be removed and it placed in the wrist via ball joint. His appearance is based on his Dark of the Moon look, as it his "Abbs". The head can be made either with the face-plate on or the face-plate of which reveals a detailed face. Interestingly though, he doesn't come with any of the guns he uses in the films, though it is thought he can hold Buster Prime's gun.
Hero Optimus Prime was the first new-mold Optimus Prime toy in the Generation 2 line. He transforms into a Kenworth truck of unknown model with a flatbed trailer. The truck and trailer form his robot mode, but cannot disconnect. His primary gimmick is an air-powered missile launcher that uses an air bellows attached by hose to launch his large, hollow, soft-rubber-tipped missiles. The bellows and missiles attach to his back in robot mode. His rifle plugs into the launcher's main body in truck mode.

When Sergeant Hound apprehended a criminal going by the name "C-81", rumors that the prisoner was in reality a "Megatron" that had gotten past the TransTechs' security procedures piqued General Optimus Prime's interest. Though Cheetor assured him that it was impossible for a "Megatron" to have been allowed in Axiom Nexus, the General's concerns did not fade. More pressing concerns took over, however, when the entirety of Axiom Nexus, and nearly all of the TransTechs suffered a sudden shutdown due to a surge in the Global Net. General Optimus Prime tasked Bruticus with keeping guard over the prison while he and Hound went to investigate the source of the surge, the planet's core.
The box seems to have been created rather hastily from the Japanese original. It is roughly identical to the Tomy release, but with the Japanese text edited out... mostly. Random Japanese text remains floating in space on the top of the back panel and underneath the "Jetwing Optimus Prime" name on the front. Curiously, the left flap has been rewritten to eliminate mention of NEST and the jetpack's ability to detach, while the right flap has been (badly) edited to remove all mentions of MechTech.
Available in a two pack set with Battle Changer Megatron, this Optimus is largely the same as as the single release, with some minor differences. He uses a new "double harness" piece on his torso instead of using two harnesses, leaving more space for his head to grip the neck-post. He also has different windshield decals, and his reds and blues are slightly darker. And, most obviously, he has an additional buildable trailer, though it doesn't really attach to the truck mode in any meaningful way.
Optimus Prime is among the three Autobot figures available to play in the Monopoly Transformers Collectors Edition game.[28] As the figurehead of the entire Transformers franchise, Optimus Prime has been on more pieces of merchandise than can be stated here. Several statues and busts of Optimus Prime as well as Optimus Prime themed objects have been released by various companies since the return of Transformers to prominence, such as the "Optimus Prime Oral Care Station". Other figures released include various PVCs as part of Takara's "Super Collection Figure" line, which were later imported as part of Hasbro's "Heroes of Cybertron" series. Larger "Mega Collection Figure" PVCs were articulated and came with energy axe and gun figures. As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".
Fellow Seibertronian Actar has written an in depth review on the new Transformers Studio Series Jetfire. He gave us great images of all modes including the combined mode and the giant cannon. We see how it scales with both SS ROTF Megatron and the ROTF Fallen. Enjoy! Alrighty! Just got my hands on the latest SS Voyagers and Leaders. However, the one that has won me over the most is Jetfire. So, I was rather hesitant and critical about Jetfire when I first saw him, but - Read More
Replacing the weapons of the Hasbro releases, these new Mini-Cons transform into their larger parnter's signature weapons. They came as unassembled, unpainted model kits, similarly using stickers to fill in details. Several Arms Microns also came by themselves in bagged kits, plus there was a metric ton of promotional Microns throughout the line, possibly more than any prior line (even Micron Legend!), and that's not counting the ones that were released during the First Edition series. The Arms Microns also had multiple 5 mm posts and holes, and could be combined into super weapons, plus the larger toys were retooled to have new Arms Micron mounting points.
Available exclusively from Japanese clothing company A Bathing Ape in 2015, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a unique deep red color scheme matching the Convoy Reissue BAPE Ver. RED of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
With Season One of Cyberverse drawn to a close, we have word of a newly-listed Cyberverse DVD currently available for pre-order. Titled ‘Transformers Cyberverse: The Journey’, the anthology consists of 66 minutes of product, which can only be assumed to consist of the first six episodes, given the DVD’s plot synopsis and the title of the collection corresponding to the show’s fourth episode, ‘The Journey’. The DVD itself is listed here by New Zealand based online retailer - Read More
This incarnation of Optimus Prime first appeared in the Transformers: Universe comic series in issue #2. As part of Omega Prime, he was escaping with various other Transformers from Unicron. He appeared again at the end of issue #3, brought in to Alpha Trion's lab to aid Optimus Primal. After this, both Prime and Magnus became part of Optimus Primal's army of Autobots, battling against Unicron's Decepticons.
The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his Matrix of Leadership, as is a Movie-style Matrix cover (not pictured). He also comes with an alternate hand that allow him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands and helmet, for some reason...
Legends Class Optimus Prime is based on his original Generation 1 appearance. He features a fake grill for his robot mode, and his large legs result in a fairly thick and compact truck bed. He is part of "Reveal the Shield", a subline that outfits all its toys with rubsigns, and in this case, it's located on the left side of the truck/his left elbow.

As Megatron explained that the Matrix was giving them a vision of the future, they witnessed themselves battling on Sherman Dam. The nature of their surroundings established, Megatron resumed the scheduled beating, but a series of setting shifts ended with Optimus reunited with Grimlock. Grimlock handed Prime a sword and suggested he finish Megatron for good. The War Within #5 Optimus found Megatron again, engaging him in combat and announcing that he was playing the game by Megatron's rules now—without mercy. Though he did not slay Megatron, he inflicted enough damage onto him to expunge from his memory the visions the Matrix had granted him. A short time later, Optimus joined the other Autobots in attacking the Decepticons who were trying to use Cybertron's planetary engines. Grimlock was finally impressed with Prime. Thanks to the combined efforts of Optimus and Grimlock's squad, the Decepticons were driven away and the engines were destroyed before they could tear the planet apart. Afterwards, Optimus's group arrived back at Iacon to find it destroyed. Optimus announced the Autobots were no longer evacuating the planet and threw away the Golden Disk full of the knowledge of his predecessors which the council had given him, saying he would choose his own course. The War Within #6
Knight Armor Turbo Changer Optimus Prime is a Voyager-sized figure that transforms from truck to robot in just 2-steps: pulling his whole truck kibble to the front then fold down to complete the robot mode, although converting him back requires some few steps. His only articulation is the elbows, and he features 5mm compatible hands. He also features a "Knight Armor" gimmick, which consists of his mask popping out to his head with the press of the button on his chest. Take note that you need to flip back the mask manually before you turn him back into Truck Mode.
If all four Autobots ventured together into the Decepticons’ lab, they first encountered Laserbeak, only to quickly dispatch him. Venturing further into the lab, the group soon spotted the antidote they were after, and sent Mirage to fetch it. Mirage returned with the beaker and news; he had heard Ramjet and Starscream talking about using a new poison to turn humans into mindless slaves.
Available exclusively from Japanese clothing company A Bathing Ape in 2015, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a unique deep red color scheme matching the Convoy Reissue BAPE Ver. RED of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
The largest Action Master set, this incarnation of Optimus Prime is a non-transforming action figure which comes with the "Armored Convoy", a large, heavily armed tractor trailer. The cab of the truck transforms into a small jet that can seat one Action Master figure, while the trailer itself converts into a larger battle station with turrets that several Action Masters can man. The sculpt of the Prime figure itself is closely based on his character model, albeit with a coloration that seems to have been based at least partially on the small robot form of his Powermaster body.
×