the one the left was a design that i hated from the start. just doesnt look like what a Transformer is supposed be. the one on the right is almost there but not quite. a very welcoming design though. its what Prime should have looked like from the start. To say it is too 80s, well the first film should have taken place in the 80s, not present day. The Transformers are icons of the 80s. You make Cybertron in the future tense all futuristic and alien-ish and whatnot, but on earth you make it in the 80s.
In the Cybertron universe, Cybertron was under attack by two of the Heralds of Unicron, Nemesis Prime and Ramjet. They had already damaged Alpha Trion, and while Ramjet engaged Vector Prime in a duel high above Cybertron, Nemesis Prime got past Sentinel Maximus and revealed his plan to use the Dead Matrix to drain Primus and use the energy to revive Unicron. Omega Prime, a combination of Optimus Prime and his brother, Ultra Magnus, appeared to challenge Nemesis Prime. The brothers recovered, only to receive Optimus Prime, bearing word of Vector Prime's death in battle. Prime and Magnus were subsequently seen planning the hunt for Unicron with Sentinel Maximus.
On the battlefield, there are few who rival Optimus Prime's prowess. He is easily the strongest of any Autobot his size, and his ion blaster and energon-axe are deadly weapons. He would sacrifice his life to protect his fellow Autobots or those under their care and does so on a regular basis. His compassion for other sentient beings is his only real weakness, and one the Decepticons have taken advantage of time and again... though it's also the source of his strength!
Released in conjunction with Japanese cellphone maker au, au x Transformers INFOBAR Optimus Prime celebrates 15 years since the 2002 au Design Project that resulted in the INFOBAR cellphone, as well as the 10th anniversary of the live-action films. He transforms into a (non-functional) scaled-down replica of the 2002 au INFOBAR, and in lieu of cellphone functions, the figure can be paired via Bluetooth with a smartphone, such as an iPhone, to act as a notification alarm in either robot or INFOBAR mode. The screen is also non-functional, but pre-printed cards are included which can be slid into the screen to show an Autobot logo, Decepticon logo, a mockup of a cellphone home screen, or a technical "Transformers INFOBAR" design. The figure also includes a display stand.
Omron's keychains were not limited to soft plastic, with die-cast versions of the same characters from the Mascot Keychain line being made available in their Transformers Strap range. This Prime is pretty much identical to the Die Cast Figure version of the character, just a little smaller—about 2.5" in height—and with the addition of a keychain with a wrist-strap.
Part of the first wave of Bot Shots Series 1 single-packs, Optimus Prime is a teeny little long-nosed semi truck with "trailer", with a spring-loaded automatic transformation to robot mode triggered when his front bumper is pressed. He has a "spinner" in his chest that shows his three attack types and power levels. His truck mode and robot body are influenced by the live-action Optimus Prime, while his head is taken from the original. His blue paint is light and sparkly-metallic, his red paint is dull matte, and his optics are yellow.
This figure was designed by Yūki Ōshima and produced by KT Figure Collection. The figure is actually a mini bust of Optimus Prime, which includes the head and the upper body without arms. The chest design comes with translucent blue windows and a grill on the midsection. There is also a button in the back. Pushing the button will open the chest and cause the Matrix to emerge, similar to the scene in The Transformers: The Movie.
In another possible sequence of events, the trio returned to Autobot headquarters to relate their findings to Optimus Prime. The Decepticons planned to use a Destruction Beam to create a fault line near Center City, which would in turn be exploited by Rumble’s earthquake-inducing abilities to destroy the entire area. The Autobots then decided to split up in two groups, one to attack the Decepticons’ fortress, the other to stop Rumble in Center City. Optimus headed the lead team.
This TakaraTomy Asian market-exclusive Leader Class two-pack consists of a redecoed Jetfire and a slightly altered Buster Optimus Prime. Buster Optimus Prime is almost identical to the single-pack Japanese release of the toy, but unlike the standalone Buster Prime, has a head with a faceplate, itself containing more paint details than the first release of Revenge of the Fallen Leader-class Optimus Prime. The flames are outlined with light blue instead of white for accuracy to the physical truck prop (though it ends up being inaccurate in robot mode). Jetfire has a subtle, more movie-accurate colour scheme.
When a two-part race was being held with a massive supply of oil and gasoline as the prize, both the Decepticons and the Autobots badly wanted to win it. Megatron entered the race by hiding himself inside a hollowed-out car and harassed Cliffjumper all throughout the contest. When Prime discovered the car was being driven by his arch foe, he swiftly pulled a telephone pole out from the ground and used it to bash the mortal hell out of the cheating Decepticon. Thanks to Prime's violent intervention, Cliffjumper was able to win the race. Afterward, Optimus Prime celebrated the Minibot's victory with a gargantuan smile as all the Decepticons starved to death. The Great Car Rally
NEW! TFSource News - IF Catastrophe, Flame Toys Tarn Final Stock, MMC Cylindrus, MP-36+ Megatron & More! NEW HOT INSTOCK ITEMS: - Iron Factory - IF-EX24X War Giant Catastrophe - Set Of 5 - Flame Toys - Transformers - Tarn - Mastermind Creations - Ocular Max - R-34 Cylindrus - Mech Fans Toys - MF-37 Veteran and MF-20 Scourgers - Magic Square - MS-B02F Fevernova - Diaclone Reboot - DA-30 Powered System Maneuver Gamma & Delta Set - Planet X - PX-C01 Ismenios - Transformers Encore - - Read More
Part of the second wave of Warrior class figures, this Deluxe-sized Optimus Prime transforms into a futuristic trailer truck. Due to his simple transformation scheme, he has a faux window chest in robot mode, while the end of the front trailer kibble has extra toes. Optimus Prime also comes with an axe, which was based on the Energon Axe weapon from the War for Cybertron game. Undocumented in the instructions, Prime's axe can store between his trailer, or plug into ports on either of his shoulders. His scannable Autobot insignia is on his robot mode left shoulder and is easily scannable while still in-package.
Part of the new Adventure Shokugan series, this Optimus Prime is a transformable snap-fit kit molded in red, blue, and yellow plastic with detailing from stickers. The kit's transformation engineering is borrowed from the Warrior class figure. But unlike the said toy, the Axe must be pegged onto Prime's legs before transforming, and his shoulders are molded on his front truck halves/shoulders not being flipped down. Also, the stickers are used to cover the molded cavity on the front shoulders. As with Fixit & Underbite, Optimus Prime is fully transformable.
Our Deal of the Day features hand-picked daily deals with low prices on top electronic products, video games, tools, items for your kitchen and home, sporting goods, computer software, and more. Every day you will see our Lightning Deals displaying limited-time deals at great prices; make sure you buy quickly because these deals will go away fast. Our other Savings and Sales include hundreds of items throughout Amazon to pique your interest for savings on HDTVs; movies or TV shows; fashion items like clothing, jewelry, and watches; toys; and magazines. Come back often as our deals update daily.
Although Rodimus plays the part of the brash youth, he is actually very intelligent, and has no loyalty to Optimus Prime; only his own personal gain. According to his biography, Rodimus used to be leader of the Wreckers, a mercenary group hired by Optimus Prime; but after the deaths of the other members, he joined the Autobot Seekers under the command of Goldbug.
The designs for the original 28 figures were made by Kojin Ono, Takashi Matsuda, Hideaki Yoke, Hiroyuki Obara, and Satoshi Koizumi. Hasbro would go on to buy the entire toy line from Takara, giving them sole ownership of the Transformers toy-line, branding rights, and copyrights, while in exchange, Takara was given the rights to produce the toys and the rights to distribute them in the Japanese market.
This gold vacuum metallized (save for his black joints, which they were made out of unpaintable plastic) Protoform Optimus Prime figure was featured as a Lucky Draw giveaway (along side similarly gold vac-metal versions of Voyager class Optimus Prime and Protoform Starscream) in the December 2007 issue of TV Magazine. Released in 2008, only 5 pieces were made, making it one of the rarest Lucky Draw figures; the images at right represent the only known photographs of it.
This mold was redecoed in 2000 as Car Robots Black Convoy, and slightly retooled as his US incarnation "Scourge". After Scourge, the next use of this mold was planned to be Toxitron, which ended up being canceled. The slightly retooled version of this mold was released in 2006 in Japan as reissue Battle Convoy, which was the name of this toy during the Japanese Generation 2. The reissue used the Robots in Disguise modified tooling, with a slightly modified deco using silver vacuum-metalized plastic on his chest and trailer sides along with additional paint applications and G2 symbols. The mold was also redecoed to create a new Generation 2 version of Ultra Magnus as an E-Hobby exclusive (unusual in that the character was killed in the course of Japan's Generation One fiction).
A Japanese TV Magazine exclusive, this release of the Super-Con class Prime toy has almost all of his parts cast in translucent coloured plastics—hence the 'crystal' moniker—representing the character's disembodied spark after his destruction in the Armada cartoon episode "Crisis" and resurrection in "Miracle". What that means for poor Over-Run (or "Surge" in Japan), also cast in translucent plastic, we couldn't say! Available via mail-order, only 5000 pieces were distributed in October of 2003.
Released by TakaraTomy as part of a 2010 promotion honoring the "future era" of the original cartoon (which was set in 2010 in Japanese continuity, you see!), this exceptionally morbid re-release of the Masterpiece Convoy figure recolors the Autobot leader in blacks and greys, representing his dead body from The Transformers: The Movie—but don't worry, kids, it's actually a "sleep mode", according to the figure's name! Limited to 2010 pieces in Japan (see what they did there?), it comes with all its customary accessories, including the Perfect Edition trailer, redecoed where appropriate: the trailer itself has become translucent, its energon-axe is now transparent grey, and Megatron, in another movie homage, is rendered in translucent purple, evoking the scene depicting his transformation into Galvatron. The figure was also released in other parts of Asia as a limited edition of 2010 as well, combined with the Japanese edition for 4020 total. The Japanese version denotes "Serial Number in Japan: ####/2010" on its bio card with the number out of 2010, while the Asian version denotes "C1 - ####/2010" with the number out of 2010 on its bio card.
The main difference is an extensive redeco, rendering Prime in his traditional colours instead of the iPod-inspired white. (Yes, it actually had more to do with iPods than Magnus, believe it or not.) Reminiscent of the Kiss Players, iPod Optimus Prime's entire ABS/PVC structure is painted over, including his fists and the silver stripe that runs along his chest. His wind shield is colored blue like the one in the 2002 New Years Convoy reissue. The silver-grey trailer has a fairly elaborate deco, featuring detailing that resembles the outward appearance of the traditional Prime trailer, including the doglegging blue stripe and Autobot symbol, an effect somewhat marred by the large, visible gap on one side. When reconfigured into dock mode, the interior surfaces surrounding the speakers are decorated with black-on-silver techno-patterns as well as three, count 'em, three logos proclaiming the name "Optimus Prime". The recessed space also features a stylised, almost Frank Milleresque, high-contrast portrait of Prime's face, although this would be largely covered by the intended insertion of an iPod.
This release of Buster Optimus Prime was susceptible to a paint scraping issue on the silver painted slide-out barrel of his blaster. This problem was fixed for the DOTM Re-release by relocating the silver paint app from the barrel to the inside wall of an exposed gas tank that had been previously left as unpainted grey plastic. The black paint app on the barrel was left unchanged.
Having launched a painstaking review of each of those 14,200 pieces in the LEGO universe, the Design Lab found that 90 percent of new elements were developed and used just once. And many components were duplicates. Among the dupes were eight minifig police officers and six minifig chefs, with barely decipherable differences between them. The Lab dealt with the redundancies by slashing the total number of components by more than 50 percent. When it reduced the product portfolio’s minifig chef population from six to one, designers protested and longtime fans howled. To calm the fans, LEGO tried humor: it held a mock online memorial service for the “dead chefs.”
Shortly after reaching the other shore and taking out Skywarp, Prime witnessed the gigantic Bruticus bust out of the Terrordrome and attack everything around him. With Superion gone, Prime knew that there was only one way to stop this rampaging monster, and ordered his Autobots to evacuate the humans while he went looking for the Matrix of Leadership. He soon found that Snake-Eyes was in possession of the artifact, but was under attack from Megatron. Prime attacked Megatron, keeping him at bay while telling Snake-Eyes that destroying the Matrix would kill Bruticus. The ninja complied, only to learn that Optimus had left something out of the story: smashing the Matrix would kill all the Transformers, including Prime himself. Looking at the Autobot leader's body, the Joes knew that Prime had been aware of this, and had deemed it a necessary sacrifice to save the humans. The Iron Fist
For this re-release of Masterpiece Convoy, Takara submitted to the biggest desire fans had for the figure and produced a full-size, fully transforming plastic and die-cast metal trailer. The trailer opens up into Convoy's Combat Deck, with storage for its accessories and a functional repair drone, though Roller is conspicuous by its absence. Like the original Combat Deck, the drone can extend through holes in the roof and front of the closed trailer, and the interior has enough room to accommodate one Alternators figure in vehicle mode. Some reports suggest that the paint on this figure's chest chips more easily than past editions.
Starscream was my first transformer. I got it because my parents bribed me to climb to the top of the pole in the gym class. Shit was scary. Do they even make kids do that anymore? Anyway, I protected that with my life. Sorry to hear about yours. I didn't have siblings at the time but within a few years I did have some who pretty much did destroy everything they touched. Luckily by then I was a teenager and figured out good hiding places for important stuff.
This is a redeco of the 2004 20th Anniversary Optimus Prime, released to coincide with the 20th Anniversary of the original Transformers animated movie and DVD release. He is painted in flatter, non-metallic colours to more closely resemble the original cartoon model, as well as the Voyager-class Classics Optimus Prime figure. The color of the light of his feet has changed too. As a cost-cutting measure, all vacuum-metalized plastic has been replaced with with silver and gold paint. Confusingly, his Ion blaster is now cast in blue plastic.
Like the original Warrior Class Optimus Prime, the figure features an undocumented feature: His axe can be stored on his vehicle mode trailer. Additional features include storing the axe onto either of his leg hooks, combining the launcher with either of the swords at their hilt, and storing the launcher underneath the vehicle. In a neat bit of engineering, he can fully transform with his swords attached.
On a Cybertron dominated by Shockwave and the Decepticons, Optimus Prime and the Autobots took on the roles of resistance fighters. Cobra experimentation transported a contingent of Cobras and G.I. Joes to Cybertron and destabilized Teletran 3, which led to the computer sending several Transformers to Earth across different time periods. When Optimus Prime saw Jazz get zapped by Teletran 3, he leapt to rescue his soldier, only to be transported away as well. G.I. Joe vs. the Transformers II #1 A team made up of Joes and Cobra agents were sent back and found Optimus Prime and the Stunticons in 1930s-era Chicago, disguised as period cars and trucks. The Stunticons chased Prime and the Joes around the city until everything was wrapped up with bullets, a collapsed bridge and some dynamite. G.I. Joe vs. the Transformers II #2
If instead of all heading into the lab together, the Autobots had sent in Bumblebee alone, and Bumblebee subsequently managed to escape with the antidote to the Decepticons’ poison, the Autobots escaped from the Valley of Poison and returned to Autobot headquarters. Once the other Autobots were cured, they all drank a toast to Bumblebee, to celebrate his part in the mission Decepticon Poison
After the film, in season three, Rodimus did not have time to rest on his laurels as commander, immediately finding himself and the Autobots targeted by the Quintessons, who lured him to their planet of Quintessa and detonated it in hopes of destroying the Matrix. Rodimus and the Autobots survived, however, and Rodimus proceeded to voluntarily short-circuit himself to allow his life-force to enter the Matrix, feeling that the answer to the mystery of the Quintessons' identity lay within it. His hunch proved correct – the Quintessons, he discovered, were the Transformers' creators, and Rodimus knew that the future would be a difficult time for the Autobots.
A limited edition of the Optimus Prime toy sold as a mail-away exclusive by PepsiCo was made available in North America in 1985. This version of the figure came with a small fold-out leaflet glued to the top-right of the packaging, which contained two Pepsi logo stickers for the buyer to attach to Prime, mid-way through the traditional silver-and-blue stripe on his trailer. Canada also got a version of this promotional figure, but with much larger stickers that were the full length and height of the trailer. This promotion would go on to serve as the inspiration for the Japanese character of Pepsi Convoy, who would in turn be released by Hasbro as a new "Pepsi Optimus Prime" in 2007.