The project was crowd-funded through Japanese crowd-funding site Makuake. For 5,400 yen, contributors received an INFOBAR Optimus Prime, or for 16,200 yen, received INFOBAR Optimus Prime, INFOBAR Megatron and INFOBAR Bumblebee, the only way to obtain the last two items. The project received one million yen in the first 24 hours, ultimately topping out at over 32 million yen.
Rodimus and Cyclonus appear together in the story Wreckers: Finale Part II from 2007. During the invasion of Cybertron, Cyclonus and Rodimus come to final blows, fighting each other to a stand-still. Both severely wounded, Cyclonus is about to kill Rodimus when the Predacon Rotorbolt arrives and kills Cyclonus for betraying him. Rodimus then helps Cheetor to drain the power of the Divine Light from Cryotek. When Rodimus is dying from wounds he received battling Cyclonus, Tigatron is unable to save the former Autobot leader, having given up the power of the Vok to save the Predacon Fractyl.
Another Hasbro release of the MP-10 mold, which is basically a reissue of the 2010 Transformers line's Masterpiece Optimus Prime, but with the Japanese release's ID Number. Surprisingly he is NOT mistransformed on the initial official photography... until secondary stock photos had the vehicle mode slightly mistransformed. Unlike the original, Hasbro version, this version features silver paint on the interior of the trailer. This version also removes the red paint on the die cast hinge piece in his body and replaces it with blue paint. Sadly, this figure doesn't come with the Key to Vector Sigma. Due to compact packaging, the trailer is prone to scuffing.
The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno. The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original transformers toy line.
Optimus Prime features a MechTech Blaster that can convert into an Energon Battle Axe reminiscent of the Generation 1 character's iconic weapon, though the weapon cannot be locked in battle axe mode. There is also a pair of C joint rods on the underside of both forearms. His MechTech blaster can plug into the port on each of his arms or be held in either hand in robot mode, or plug into one of two holes on his truck roof/robot shoulders.
Hot Rod then fought in the battle of Autobot City and saved the city for if he had not attacked Megatron, he would have destroyed it. Due to his attempted intervention in the epic battle between the Autobot leader, Optimus Prime and the Decepticon leader, Megatron, Prime was lethally injured. Before he died, the Matrix got passed on to the Autobot Ultra Magnus, whom he referred to as "old friend", despite protestations.
You've got to love it when Amazon tries to be coy by sticking with code names while giving us a full look at the figure. That doesn't seem to be changing any time soon, the latest cases being our first look at stock photos of two Cyberverse Scouts on Amazon.com.au. This time around it's Ratchet under the name "Aces" and Shadow Striker under the name "Rockhounds". We got a look at these two in bot mode at New York Comic Con and later we got CG pictures, but this is our first look at both modes - Read More
As with other Dark of the Moon Activators toys, this Optimus Prime (released under the Robo Power subline) is a very simple one-step transformation toy. You simply slam him down on the big blue button on the back end of his truck mode and he transforms thanks to spring-loaded mechanisms. To transform him back, just slam him down again on the same blue button.
Hot on the heels of their licensing deals with Pepsi and Nike, TakaraTomy got themselves a slice of Apple™ pie and released Convoy —playing iPod speaker— as part of their small, musically-themed Music Label line. This version of Prime is an all-white redeco of the original Generation 1 cab robot, which (much like the "Marine Version" of Prime from the Sports Label line) makes it seem like he ought to be Ultra Magnus. The figure is actually even derived from the retool of the mold created for the original Ultra Magnus figure, as distinguished by the elongated hubcap pegs on the front wheels. Like Pepsi Prime before it, the figure's fists now store in peg holes on the under side of its trailer. The toy lacks any of the original Prime's stickers (even the silver stripe on his chest is now a paint operation) and includes the original thick-barrelled version of Prime's blaster. The toy features a brand new headsculpt based on the 20th Anniversary Prime figure, given additional poseability not previously seen on the figure by being mounted on a ball joint.
Optimus appears again in the 2011 film Transformers: Dark of the Moon. Optimus receives his own armory consisting of weapons and flight tech that transforms into a trailer for him to carry in vehicular form. After assisting NEST operatives in fighting Shockwave at Chernobyl, Optimus learns that the humans have concealed the discovery of an ancient Cybertronian ship on the moon. He revives his old mentor, Sentinel Prime, with the Matrix of Leadership. However, Sentinel Prime later betrays the Autobots, murders Ironhide, wipes out most of NEST, and brings an army of Decepticons to Earth with Space Bridge Pillars. During the battle of Chicago, Optimus kills Shockwave, the Driller, and many Decepticon Protoforms. Finally, Optimus challenges the traitorous Sentinel Prime and they engage in a fierce duel. At first, Optimus appears to have the upper hand, but Sentinel eventually overpowers him and severs his right arm. However, before Sentinel can deliver the killing blow, Megatron attacks and severely injures him, having realized that he will never be able to remain leader of the Decepticons as long as Sentinel is at large. Megatron attempts to make a false truce with Optimus, but Optimus doesn't fall for it and attacks Megatron, decapitating him with his battle-axe. Optimus then bitterly executes the wounded Sentinel with Megatron's shotgun. With the Decepticons defeated and the war finally over, Optimus and the Autobots accept Earth as their new home.
Although MechTech Optimus Prime's deco is similar to the first Deluxe Class figure, some of his parts (robot shoulder flaps, chest piece/truck front) were recast in blue plastic (with the chest being painted red), and his paint applications on the pelvis, headlights & thighs are omitted. His front truck hood/backpack's deco is altered: the truck steps and the fenders were painted blue, and the gold sprays on the flame tampographs are removed, while he features additional flame tampos on both sides of his front hood, and an Autobot Insignia on his left robot shoulder. He still retains the light-piping gimmick, but cast in clear plastic, with the eyeballs being (halfheartedly) painted with clear blue. His MechTech weapon is cast in transparent orange plastic, with the exception of the scope/lever and the gun barrel, which remained opaque silver plastic due to being cast with unpaintable plastic. He also features Cyberglyphics on the left side of his vehicle mode front hood.
A single-packed version of the battle damaged Voyager Optimus Prime toy from the Sam's Club exclusive three-pack. Although the assortment number and the general packaging style (which are both the same also used for the Premium Series redecos of Voyager Class Autobot Ratchet and Megatron) seemed to indicate that this might be a Best Buy exclusive, it was later confirmed to be an "international market" exclusive. It was released in Hasbro's Southeast Asian markets, but was not available in the USA outside the Sam's Club three-pack.
Sold by Hasbro Toy Shop at various conventions, Pepsi Optimus Prime is a repackaging of a virtually unaltered 2005 Japanese Pepsi Convoy. (Again, his stacks are shortened for safety reasons.) However, this U.S. release is, officially, a different character. Whereas the Japanese release's bio explicitly identifies the product as a separate character from Convoy (created with help from NASA, no less), the U.S. bio conversely indicates that their version of the character most definitely is Optimus Prime. His motivation for schilling Pepsi is, apparently, that he wanted a new disguise but basically couldn't be arsed to actually reformat into a new altmode.
Optimus Prime has a wide range of articulation for a relatively bulky figure. He has ratcheting joints in his shoulders, elbows, hips and knees, with swivel joints and ball joints supporting them in his biceps, lower knee joints and ankles. Again, unusually for a mainline figure, especially at the Leader pricepoint, his hands have individually articulated fingers and thumbs, but no wrists.
In the 21st century reimagining of the original continuity by Dreamwave Productions, Optimus Prime started life as a data archivist known as Optronix, or Orion to his friends. After taking note of a battle where the Autobot leader Sentinel Prime had been killed by Megatron, he was summoned to the Council of Elders and informed that the Matrix had chosen him to be the next leader of the Autobots. He received the Matrix of Leadership shortly thereafter, and arranged for the Autobot evacuation of Cybertron. He intended to leave the Decepticons to their own devices, but a battle with Megatron beneath the planet's surface, accompanied by visions from the Matrix, stirred him on to fight for the safety of his homeworld.
In lieu of combining with the Prime Force, Optimus Prime can also merge with Energon Wing Saber in a similar fashion, with Wing Saber splitting into four components that connect to Prime as limbs. Wing Saber's red and white torso components can become arms for Prime while his legs attach to Prime's own, creating Prime's "Flight Mode", but the parts can also be swapped around, with Wing Saber's legs deploying large missile launchers and becoming arms to make Prime's "Fight Mode". Alternately, Prime can combine with Energon Omega Supreme to form what his packaging calls "Powerlinx Omega Supreme", but which the cartoon named "Optimus Supreme". The Prime Force drones can attach to four connectors on Optimus Supreme's body.
This version of Optimus Prime is an all new mold, being the most movie accurate so far — or at least he was until Buster Prime came out. It comes with his two energon blades, and does not have a large gap at the back of the cab like the previous Leader-class Optimus Prime. It can combine with Leader class Jetfire to form Jetpower Optimus Prime. He is also very hard to transform. The process involves unclipping his firewall from his chest in a fashion that harkens to dissecting toys that lack screws, rivets or glue. In the meantime, he keeps saying, "I am Optimus Prime," over and over due to an overly sensitive voice clip trigger. Even the most die-hard Peter Cullen fan will be sick of his voice after five minutes of playing with this toy. That aside, the quality and articulation is top-notch and the poseability is amazing. Spring-loaded panels feature in his legs as well as ratcheting ball-and-socket ankles, G1 "transforming" sound effects, and multiple "Mech Alive" features raise the bar on this figure. Of note, the fists cannot accomodate standard accessories, and on test-shots of "Power Up" mode Prime has articulated fingers, like the 2007 toy, but this feature was dropped. Also, trying to transform Optimus from robot to vehicle mode can be very difficult at first.
During a Decepticon attack, Cliffjumper pleaded with Optimus to let him jump into the fray. Optimus denied his request, telling him that they already had the Decepticons on the run. In the battle’s aftermath, the Decepticon’s activity seem to vanish altogether. Grateful for the quiet, Optimus decided to head out and fetch extra fuel for the Autobots with Sparkplug. He returned just in time to find his Autobots in the middle of a battle with the Decepticons. With Sparkplug and Prowl’s help, Optimus refuelled his troops, and once more drove the Decepticons back. Revenge of the Decepticons
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.
In a rare move, there were no brick and mortar store exclusives in Western markets for the regular Prime line. The "Rust in Peace" special edition of Terrorcon Cliffjumper was available at San Diego Comic-Con and Hasbro Toy Shop, while the "Dark Energon" series of translucent redecos was sold by online retailer BigBadToyStore. All of the "Dark Energon" toys were available at general retail in Singapore and Malaysia, and the Voyager Class figures were also available at general retail in the Philippines.
The largest Action Master set, this incarnation of Optimus Prime is a non-transforming action figure which comes with the "Armored Convoy", a large, heavily armed tractor trailer. The cab of the truck transforms into a small jet that can seat one Action Master figure, while the trailer itself converts into a larger battle station with turrets that several Action Masters can man. The sculpt of the Prime figure itself is closely based on his character model, albeit with a coloration that seems to have been based at least partially on the small robot form of his Powermaster body.
The main Prime line in Japan, while mostly using the same molds, was quite a bit different from the Hasbro version. Hoping to snag a slightly-older market, the toys were given a bit of "model kit" vibe. Paint operations were reduced and replaced with old-fashioned sticker sheets, so you had to customize/complete the toy itself... and then there was the blatantly model-kit Arms Microns packed in with every toy.
In "A Fistful of Energon", Optimus Prime is informed by Ultra Magnus about Starscream's escape from prison. He is quite upset when he has heard that Prowl set out in search for him on his own. He orders Prowl to return, but he disobeyed him. Later, Prowl is bound and abandoned by Lockdown, who wants to get the bounty that Megatron had set on Starscream. But Optimus Prime, together with Bulkhead and Ratchet, succeed in finding and releasing Prowl.
The Sword of Judgement included with this toy is the same mold as the weapon included with the Age of Extinction leader class Optimus but cast in flat grey rubbery plastic rather than the transparent plastic and paint operations of the initial release. This Optimus Prime erroneously features blue paint on his feet instead of the screen-accurate red.
A retool and repaint, including really shiny chrome, of Revenge of the Fallen Leader class Optimus Prime. In this version, his dark-blue is replaced with a more purplish color and his orange blades have become translucent with some silver. Also, his fuel tanks detach and combine to form his Ion Blaster and his mouth is now visible. Unfourtanetly, all that chrome makes it even harder for him to transform than the last prime. All of these new things make him even more accurate to the movie than his predecessor. Like the picture on the right says, Buster Optimus Prime was rereleased, this time with his mouthplate, in an exclusive set with a redecoed Jetfire.
In the interim year, with the Decepticons defeated, the Autobots entered into an even closer relationship with Earth. The Autobots also began the colonization of other worlds, the first of which was the planet Athenia, where Optimus Prime was stationed. It soon became apparent, however, that the consequences of releasing the energy of the Matrix to cure the Hate Plague were more far-reaching than Optimus had anticipated. Without the energy of the Matrix to act as a balancing factor, Vector Sigma had become destabilized. The Decepticons suddenly returned to exploit this, assaulting Cybertron in order to seize control of the mega-computer. Prime took a squad of troops to aid in the battle on the planet. When the arrival of the Autobot Headmasters tipped the battle in their favor, Prime broke off from the main attack and headed down into the depths of the planet, planning on stabilizing Vector Sigma at any cost.
An all-new Leader class figure of Optimus Prime, featuring a robot design and transformation that is closer to its film counterpart than the 2007 toy version. Features retractable blades on both forearms. New "MechAlive" feature consists of visible moving gears in the chest behind the cab windows. At the push of a button on the back of the cab, the truck mode emits an engine idling sound. The transformation sound is played when the upper torso and lower torso are connected. A recording of Peter Cullen saying, "I am Optimus Prime!" is played when his chest is pushed upward via a lever on his waist.
The TakaraTomy version of Premium Series Optimus Prime has a considerably different deco to Hasbro's release. Similar to the unique chrome Optimus Prime, Optimus Prime Battle Mode features vacuum-metallized parts for nearly all of the silver truck parts, for a greater resemblance to the polished chrome on the real prop trucks. Unfortunately, as his feet are the front fenders and grill, this will likely lead to chipping. In robot mode he retains several decos that were removed from Hasbro's Premium Optimus Prime for cost reasons, such as the blue and gold decos on his thighs. Finally, the flip-out energy sword is coloured gold to reflect its "powered up" appearance.
In 2002, 3H secured the official Transformers convention license as well as licenses to produce comic books and start a fan club. Optimus Prime appeared in Transformers Collectors Club comics, a comic released by 3H enterprises. In the comic, he is the same Optimus Prime from the Robots in Disguise continuity, but is taken to the Transformers: Universe reality.
Mega Optimus Prime is a new larger-sized mold with the similar transformation scheme from the 3-Step Changer toy. It transforms from truck to robot in just 3 easy steps! His deco is based on his appearance in the season finale "Battlegrounds". He also obtains additional articulation on the arms, and sports connector ports for any Robots in Disguise (2015) Mini-Con figures.
Part of the first wave of the Combiner Force assortment, Optimus is a roughly Scout-class sized figure that changes from his futuristic truck with a combiner chest that doubles as his spoiler into a robot in three four extremely simple steps. His individual robot mode only has limited articulation on his shoulders. He also has a little green arrow above the connector on the truck bumper indicating where to crash him to combine with other figures. A 5mm post hole on top of his vehicle mode can accommodate a compatible accessory or Weaponizer Minicon, though he cannot use it in his individual robot mode.
Prime's firing missile and Mini-Con activated gimmicks remain accessible in this mode, but look a bit doofy if you deploy them. The initial Hasbro release of Prime had tabs in its Super Mode shoulders that prevented them from rotating above the horizontal default position, so as not to break the wires that run through the toy's right arm. Coupled with the limited elbow joints, this left Optimus Prime able only to point his weapons towards the ground, and the tabs were removed on subsequent editions of the figure.
In the movie, he starts out as a 1976 Camaro before modernizing himself. But the 2007 version (the fifth generation of the model) was a concept car-- you couldn’t even buy a new Camaro until 2009. They later switched to the production version for the 2009 sequel Revenge of the Fallen and he was yet another updated model for Dark of the Moon in 2011 (the SS model). In Age of Extinction, he appears both as a 1967 model and another new model of the current version. Finally, back in June, Bay tweeted that in next year’s The Last Knight, Bee would be a custom-built 2016 Camaro. Over the first two years of the relaunch, Chevy sold an astounding 140,000 Camaros and saw a 10% spike in the yellow model, thanks largely to our friend Bumblebee.
Optimus Prime is armed with two large rifles formed out of a combination of both smokestacks and fuel tanks. These rifles peg into lower arms with grips for his open hands. The under-slung fuel tanks can fire spring-loaded projectiles. In vehicle mode, both smokestack rifles can be deployed as twin cannons, and this mechanism can also be used to store the rifles and deploy them as shoulder guns in robot mode.
The figure's transformation scheme is based on the original G1 figure, the only differences being that the fists are not removed but become the headlights, and instead of flipping backwards inside the chest, Diablock Convoy's noggin flips forwards with the aid of sideways-opening windows, akin to Masterpiece Prime. A "laser rifle" in the shape of his ion cannon can be built from black bricks, and stickers bearing the Autobot faction symbol can be placed on Diablock Convoy's shoulders, although this is not recommended as it is designed to permanently stick to multiple tiles which dislodge easily and may damage the sticker.
In Transformers Ongoing, which takes place two years after the events of All Hail Megatron, the Autobots would remain on Earth as Prime feared the return of the Decepticons. Unfortunately, this led to the capture of a number of Autobots by Skywatch, including Windcharger, Gears and Prowl. Hot Rod was reformatted into a Pagani Zonda. Already frustrated, he lashed out at Optimus, accusing him of keeping the Autobots on the planet because he needed someone to protect and demanding he be allowed lead a team to rescue Prowl. An admonished Prime agreed to a covert operation, but with Ironhide along to watch over things. While Prowl was freed, it turned out the humans had used him as bait to draw the other Autobots in. However Wheeljack's new shielding protected Hot Rod's team from Skywatch's inhibitors and in a panic the soldiers switched to lethal measures. Hot Rod was targeted and Ironhide was killed protecting him. An enraged Hot Rod turned on the humans, damaging their equipment and machinery.
Nonetheless, I remain a big fan of Lego and although I think they have somewhat moved away from their roots with the excess of licensed products (and the earlier licensed products were, in my opinion, not very good because they contained too many specialized non-generic pieces that weren’t useful for generic building. But that situation is improved and in particular we have found the Star Wars sets to be of most value for generic building, because they generally have very few really specialized pieces (although to be fair the sets are most useful for building other spaceships, etc).
Rodimus gained the help of the criminal Witwicky family, believing they would help him learn more about Earth. After fighting Goldbug for leadership of the Autobots, he renamed himself Rodimus Prime. His first attack on the humans was to take control of the base controlling a human military satellite and use it to blackmail the humans into making him the leader of the world. The Decepticons were able to break into the base, where Heatwave used his ability to control machines to have the satellite fire on its own controls and then destroy itself.
Part of the fifth wave of 2012-onwards Generations Deluxe Class toys, Thrilling 30 Orion Pax is a new mold with a robot mode inspired by Guido Guidi's design for the character, originally seen in Spotlight: Blurr. Some liberties have been taken with the original concept to facilitate his truck mode, which is a new design not based on the Guidi art. He comes with his Ion Blaster and an Energon Axe with a transparent red-orange blade, both of which can peg onto 5mm ports on his hands and vehicle rear sides. Although not depicted on the instructions, the Ion Blaster can also peg into the hole in the larger blade of the Energon Axe.
Although the animated series ended in the U.S. after The Rebirth, Optimus Prime continued to appear in animated sequences of Transformers toy commercials, progressing from Powermaster to Action Master. He even made an appearance as a computer-generated Combat Hero. Many episodes of the series were re-aired to promote Transformers: Generation 2. During these sequences, computer-generated scenes featuring key G1 characters are borrowed from Generation 2 commercials to serve as opening, closing, and commercial bumpers. Optimus Prime is shown in the opening and closing fighting Generation 2's Ramjet.
In one of his less impressive moments, after running out of ammo during a battle with Deathsaurus, Optimus Prime ordered his fellow Autobots to improvise and hurl everything that wasn't nailed down at their enemy. This included the Blackball, unfortunately. Catching it, Deathsaurus began to fantasize about his inevitable galactic conquest, all the while being pelted with rocks and litter. Frustrated, Deathsaurus accidentally hurled the Blackball back to the Autobots in a fit of rage. Good Job! Deathsaurus!!
Q-Transformers Optimus Prime is a super deformed toy based on his Age of Extinction design, transforming into a cute little Western Star 4900 SB. It was sold as an exclusive at Transformers Expo months before the proper release of the toyline. Being only one inch and a half tall, this is actually the smallest transformable figure of movie-verse Optimus Prime, and it even gets close to being the tiniest transformable Optimus Prime ever made if it wasn't for another slightly smaller Q-Transformers release.