Many Transformers come with tech specs (short for technical specifications) printed on the back of the box that they are sold in. The owner of the new Transformer is encouraged to cut out the tech specs and save it. This card has information on the Transformer, and will usually include the character's name, picture, indication of allegiance (Autobot, Decepticon or other), function, a quote, a description of the character, and numerical values of the character's various attributes. Although only the numbers can be truly deemed "technical specifications", the entire card is usually referred to as the Transformer's tech specs. Each specification is rated by a value from 1 to 10, 1 being the lowest, and 10 being the highest.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-Hobby in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
Aware of the changes to the timestream and the potential for the entire Autobot race to be annihilated by Unicron, Optimus put into motion Operation Distant Thunder, a plan to undo the damage to the timeline caused by Ravage, restoring the events that were seen in the movie. This would mean that saving all the Autobots from Unicron would result in Prime and others such as Prowl, Wheeljack, Ironhide, and Ratchet would die per the original events. They hoped they would be able to at least partially avoid such an outcome by sending a message to their past selves about all they had learned.
Micromasters teams have teamwork ratings instead of ranks. Unlike the other ratings, teamwork seems to be split along faction lines, with Autobots typically holding higher teamwork ratings than Decepticons. A second unique spec value, Cooperation, replaced the Firepower rating used on individuals' cards. The traditional order (as above) was also abandoned for the Micromaster team specifications.
Being a brand new and intricate remake of the Autobot leader, MP-10 was used as the gold standard in terms of scale for future Masterpiece figures, with all the upcoming releases being sized to best match him. Much like his older incarnation, he was also cherished by collectors, generating heated debates on which version is the best one up to this day.
This redeco of Leader-class Optimus Prime replaced most of the plastics in the cab robot with colored translucent equivalents, with chromed silver wrist-pipes, a golden chrome Matrix, and red chrome window frames. His trailer remained opaque, but was cast in much deeper red plastic, with a more metallic silver used for his cannons. He was available only in a Toys"R"Us Japanese exclusive giftset released in October 2005, with a redeco of Wing Saber, and the Coby Sen'yō Rumble.
The 5-inch Power series is a little more complex (4-9 steps) and a little more spoilery, because it’s the first hint we’ve gotten that Megatron might be a part of the Transformers: Bumblebee movie. Sporting a similar form to previous versions, his alt mode is a 4-track Cybertronian tank (with the usual very conspicuous face…funny how a lazy toy design decision from the first movie has now become cannon). The Power series also has the only Dropkick Energon Igniters toy. You can use the cores sold with the Power Plus and Nitro toys to unlock special features. Camaro ‘Bee and Hot Rod round out this series.
First Edition Optimus Prime is, as his title suggests, the first toy available to the public from the Age of Extinction toy line. Prime is an all-new Leader Class-sized figure, featuring his new Western Star "5700 OP" concept truck vehicle mode and his updated robot mode from the film (well, mostly based on his initial design rather than the final design in the movie). His transformation is much simpler than his counterparts from the previous three movie lines, being billed as transforming in "15 easy steps." His torso, shoulders, upper legs, and the vehicle mode grill are all completely chrome with the exception of minor blue and red details painted on his chest. However, this comes at the expense of his smokestacks and wheels being bare gray plastic, whereas they are chromed in the film. His simplified transformation also comes at the expense of having a very bulky "backpack" of kibble composed of the rear of the truck cab and the fuel tanks, limiting his shoulder and hip articulation. However, his Truck kibble can be detached from the main figure to form the majority of his vehicle mode on its own.
Optimus has the ability to change any part of his robotic body into a tool or gadget. He has swing lines in his wrists. His wrists can also fire capture bolas. His arsenal includes a grappler, fire extinguisher and a negative friction spray. Unlike in all the previous series, his face can almost always be seen, because his mouthplate is retractable like in the 2007 live action film.
In our list of things you didn’t know about Optimus Prime, we learned that the live action version of Optimus was based on actor Liam Neeson. It turns out Michael Bay likes to base his Transformers on real actors, because it’s been revealed that Bumblebee’s character movements are based on Michael J. Fox-- but not just regular old Michael J. Fox; we’re specifically talking about Marty McFly in the Back to the Future movies.
When you’re a Cybertronian robot-alien who could easily blow any human to bits if you wanted, having a license plate can’t be that important. Really, if you’re in car mode and a cop pulls you over for not having plates, and sees that you also don’t have a driver, and then perhaps sees you turn into a giant robot, what exactly is that cop going to do?
The 1992 and 1993 European and Canadian releases make up what is often called "Generation 1.5", much to the annoyance of many UK fans. These toys are similar in design to the Generation 2 Transformers, having lightpipe eyes, and pastel colors. The 1993 European figures used the G2 faction symbols which Hasbro UK designed because their licence on the G1 symbols had expired. The 1993 figures were repackaged for European G2 release in 1994, and three subgroup molds got used in the US G2 line.
Part of the first wave of the Combiner Force assortment, Optimus is a roughly Scout-class sized figure that changes from his futuristic truck with a combiner chest that doubles as his spoiler into a robot in three four extremely simple steps. His individual robot mode only has limited articulation on his shoulders. He also has a little green arrow above the connector on the truck bumper indicating where to crash him to combine with other figures. A 5mm post hole on top of his vehicle mode can accommodate a compatible accessory or Weaponizer Minicon, though he cannot use it in his individual robot mode.
Optimus Prime has a wide range of articulation for a relatively bulky figure. He has ratcheting joints in his shoulders, elbows, hips and knees, with swivel joints and ball joints supporting them in his biceps, lower knee joints and ankles. Again, unusually for a mainline figure, especially at the Leader pricepoint, his hands have individually articulated fingers and thumbs, but no wrists.
On a version of Cybertron where Energon shortages have left many of the surviving Autobots and Decepticons all-but immobile, Hot Rod opted to be converted into a smaller and more efficient Micromaster, and thus retained his mobility. Detesting the corrupt system that has fallen into place, Hot Rod seeks to reform Cybertronian society from within the established government, while his former comrade Grimlock joined the resistance in an effort to bring down the old order. Feeling this approach to be no better than Megatron's rebellion that triggered the Great War, Hot Rod opposed Grimlock's efforts, particularly when his plans came to include using the G-Virus to turn a large number of "Builders" into immobile clones of Galvatron, unaware that the effects would also spread to a number of Maximals, Predacons, and Micromasters. Fortunately, Grimlock was betrayed by one of his own men, who destroyed most of the virus, though not before one Cybertronian was infected.
Commemorating the death of Optimus Prime in The Transformers: The Movie, this set contains a special version of the original Optimus Prime figure with show-inspired translucent blue windows. It was packaged with Ligier and Alert, in an apparent homage to the similar Diaclone "Powered Convoy DX" giftset that packaged the "Powered Convoy" version of the Optimus mold with figures using the molds of Ligier and Alert.
This version of Leader-class Optimus Prime features a new lower face sculpt that lacks a faceplate, as well as the replacement of his fuel tank/exhaust assemblies with new, transforming versions that can combine into his ion blaster/barrage cannon. To the simultaneous pleasure and displeasure of people who had already purchased the first release of Leader-class Revenge of the Fallen Optimus Prime, Buster Optimus Prime features an extensive paint job that closely matches Prime's appearance on the big screen, including covering almost all of his grey plastic with silver paint or chrome, expanding and outlining all of the flame tampographs white for greater accuracy to ILM's computer model, and generally painting in small details, nooks and crannies that were neglected on the first release due to cost-cutting reasons. The red and blue plastic colors also vary from the original release, to better match his film appearance.
Part of the first wave of Age of Extinction: Generations Voyager Class toys, "Evasion Mode Optimus Prime" is an all-new figure based on the character's initial form in the film, transforming from a cab-over semi truck into a robot mostly similar to his previous movie design. The truck mode is heavily based on Generation 1 Optimus Prime's White Freightliner WFT alt mode in both sculpt and deco, although it draws a few details, such as the singular smokestack and wheel designs, from the heavily faded Marmon 97 seen on-screen. In robot mode, he sports faux-kibble windows and, amusingly, two false smokestacks. Unfortunately, due to being used with the transformation, he lacks the real elbow joint on the arm, which makes the lower section of the arm the only poseable section. Also, Optimus can wield weapons with longer posts while his arms are in a "default" 90° position.
Like the larger First Edition figure, you can actually separate the robot mode from his vehicle shell, displaying both of his modes at once... albeit unlike the First Edition figure, this tweak could sacrifice the even stability between those two separated figures. Some of the pieces like the legs/rear wheels are particularly difficult to separate.
Across the assorted continuities of the original Transformers universe, there have been various interpretations of Optimus Prime. One of Prime's most notable characteristics over all continuities his unswaying commitment to leadership by example. The animated series' version of Optimus Prime is depicted as a straightforward, wise, and upbeat battlefield general. Additionally, the animated series' version of Optimus dislikes rap music, putting him at odds with music-loving characters like Blaster and Jazz.
While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth, picking up one year after the events that saw Optimus Prime's return to life.
Generations "Combat Hero Optimus Prime" is a metallic-blue, gunmetal, and red redeco of United Laser Optimus Prime, having the retooled tab, and being based on the canceled Generation 2 Combat Hero Optimus Prime figure, sporting a red mouthplate inspired by the official catalog image for the unreleased toy (packaged samples had featured a traditionally colored gray mouthplate). He comes packed with a (vaguely) Generation 2-styled Deluxe Class Autobot Jazz, as well as unchanged releases of Generations Legends Class Thundercracker and Motorbreath.
Epic Optimus Prime is a 22 inches tall, non-transforming Optimus Prime figure, featuring limited articulation in the waist, shoulders and wrists. His chest can be opened to reveal a command center with a seat and room to display at least three figures. His arms also feature one seat each to accommodate more figurines. The back of his arms and legs are hollow with "shelves" that allow even more figurines to be displayed.
In "Sick Mind", Optimus is infected with the life-threatening Cybonic plague, prompting Arcee and Bumblebee to infiltrate the Nemesis to find a cure for the virus Megatron himself created. As Optimus grows weaker, he learns of Megatron's survival of the space bridge explosion. It was Bumblebee entering Megatron's mind via cortical psychic patch and retrieving the cure that saved Optimus. In the next episode, "Out of His Head", Optimus is, surprisingly, saved by the revived Megatron when he intercepted Starscream's attempted nosedive to kill him.