"Cybertron Optimus Prime" new features a darker grey plastic, and mostly shares the same paint mask to the original Deluxe class figure, with added paint details on his head and the mesh-like pattern on the front of his "entry" mode. The silver paint on his chest was slightly changed from the original and he lacks the paint on his feet, his "headlights", and the top of his "entry" mode. Lastly, he features Cyberglyphics on his vehicle mode windows, and the rear sides of the vehicle. His flame attachment is now cast in translucent red plastic with orange sprays.
The "Underbite Jetpack Takedown" Optimus Kreon uses the new 2015 style of Kreon hips and torso, with a hollow hip-peg and a central post inside the torso for increased grip... which also makes them incompatible with about four years' worth of Kreons. Based on his appearance in Robots in Disguise, he features a new version of the Optimus helmet, this time lacking a moutplate. He attaches to an included jet pack, armed with two pressure-launch missiles.
The Japanese version of the toy, named "Optimus Prime Revenge Edition", was exclusively available at Tokyo Toy Show 2009, and later also from e-HOBBY. Despite being sold in Hasbro packaging like the mass retail Revenge toys in Japan (plus the addition of Japanese stickers marking it as a Japanese market release and containing Japanese safety warnings and manufacturer information), it slightly differed from the Hasbro version insofar as it lacked the tampographed kanji lettering.
Minor note: Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
Hero Optimus Prime was the first new-mold Optimus Prime toy created for the Generation 2 line. He transforms into a Kenworth truck of unknown model which defies Optimus convention by being one continuous unit, rather than the traditional cab-and-trailer combo. Decals form the windows of a faux truck face to represent his chest, featuring both his name and what appears to be a life support readout coming alive towards the end. In addition to a small gun, he is armed with a large missile launcher, which can fire a rubber-tipped rocket by means of a bellows which you slam your fist down on to produce a puff of air. The launcher is accessible in both modes, ending up mounted on his right forearm in robot mode; the bellows is attached via a rubber hose and cannot be disconnected, but stores on the figures's back when not in use, as do the rockets. A similar air-launching system with identical missiles was used by the simultaneously-released Hero Megatron, and by Laser Optimus Prime the following year (see below).
Take one part bicycle, two pages out of the Flintstones automobile design book and one hard-spoiled child and you have a pedal car. It seems like a really fun idea in theory but, in actuality, the single-speed gearing of a bike mixed with the weight of the metal shell, seats and wheels meant operation of the thing bordered on child labor. Still, the pedal car remained very sought after for generations to come.
For some reason: unlike the stock photos (pictured from the right), This Custom Kreon had a slight QC issue to the opaque and transparent helmets: One had two sides sculpted, while the other one has the small flat square sculpt (similar to the details on Hound's helmet) on the right side. Several samples had two different "variants": One with the perfect transparent helmet & a differently-sculpted opaque helmet, while the other one has the opposite. However: later releases fixes the problem by a running change.
Although MechTech Optimus Prime's deco is similar to the first Deluxe Class figure, some of his parts (robot shoulder flaps, chest piece/truck front) were recast in blue plastic (with the chest being painted red), and his paint applications on the pelvis, headlights & thighs are omitted. His front truck hood/backpack's deco is altered: the truck steps and the fenders were painted blue, and the gold sprays on the flame tampographs are removed, while he features additional flame tampos on both sides of his front hood, and an Autobot Insignia on his left robot shoulder. He still retains the light-piping gimmick, but cast in clear plastic, with the eyeballs being (halfheartedly) painted with clear blue. His MechTech weapon is cast in transparent orange plastic, with the exception of the scope/lever and the gun barrel, which remained opaque silver plastic due to being cast with unpaintable plastic. He also features Cyberglyphics on the left side of his vehicle mode front hood.
This deluxe-size, highly-poseable version of Armada Optimus Prime is an entirely new mold, retaining the ability to tow Super Base Prime's trailer, though he cannot combine with it. He comes with the Mini-Con Over-Run, who can transform into a gun for him, or can peg onto the Powerlinx plug on Optimus's back to activate a double-fisted "punching" action (that looks more like hyperactive shrugging). Like the Super Base figure, Prime has a flip down chestplate, but lacks a molded-in Matrix, and his smokestacks can be removed (and in many cases will simply fall off), but cannot peg together as a gun. Shipping in a great many waves throughout most of the later run of the line, Super-Con Optimus became a notorious pegwarmer.
Simon Furman's "Alignment", a text story available through Transforce, a British Transformers convention, mentions Prime falling during what was intended to be the final conflict with the Decepticons at Pinea Omicron, long after the events of the Generation 2 comic book. He managed to defeat Galvatron II, but in doing so, was damaged such that Grimlock had to engage a stasis field around him to save his flickering Spark, making Prime a living war monument.
One more thought: LEGO is a Danish company. The fluctuations in the price of LEGO such as the big bump around 1985-7 in Figures 1 and 2 could be because of a change in exchange rates. The conversion rate between the Danish Kronor and the US$ went from over 10 in 83 and 84 to less than 7 in 86 and 87. LEGO might have been slow to respond to changes in exchange rates, leading to the temporary bump. If you’d like to share data we can redo your graphs in DKK.
A Deluxe class toy of Prime in his Protoform stage. One of the first released movie figures, Prime's Entry Mode resembles a huge metallic asteroid. With this figure standing 5.5 inches tall and Optimus being 28 feet (336 inches) tall, the toy is about 1/61 scale. This rock-like alternate mode has led some fans to sarcastically refer to the movie protoform toys as Rock Lords.
If Optimus instead followed Prowl’s plan, he instructed his troops to transform into vehicle mode and play dead. The Decepticons, believing the Autobots’ ruse, disarmed themselves in order to carry out the Autobots’ “carcasses.” Now with the element of surprise against unarmed opponent, the Autobots Transformed and were able to easily defeat the evil robots.
Transformers: War for Cybertron was released in June 2010 for the PlayStation 3, Xbox 360, and Nintendo DS. The game takes on Cybertron during the Great War between the Autobots, led first by Zeta Prime and then Optimus Prime, and the Decepticons, led by Megatron. Transformers: Cybertron Adventures was released alongside War For Cybertron for the Wii and utilizes the same characters and setting.
The China KO has been out for years. It's about 95% the same quality as an official product. The average price is $35-$40 shipped from China. Do not purchase from buyallhappy as this seller fraudulently claims to ship from Los Angeles but ships from China and prices the toy much higher. The seller also ships in a crappy cardboard box and the toy will likely arrive crushed. Most China sellers will use 6 pieces of thick styrofoam as a box which is much more durable.
The mid-range Voyager class Movie Optimus Prime toy transforms into an amalgamation of the Kenworth W900 and the Peterbilt 379, making this toy fairly inaccurate to the actual vehicle Optimus Prime turned into. Because of the smaller size and lessened complexity, the Voyager class Optimus Prime features a significantly different transformation sequence compared to the Leader class toy, and indeed, the actual CGI design. However, as the actual truck cabin no longer forms his chest, the cabin now features a small interior with opening doors and a non-removable cowboy-hat-bedecked driver figurine that flips out of the seat when the driver's side door is opened.
Transformers: Cybertron, named Galaxy Force in Japan, was a follow-up to the successful Armada and Energon lines. The companion anime series program was not originally conceived or produced as a continuation of the Armada/Energon storyline, and it was only later that it was retconned to be a continuation. Thus, several inconsistencies exist. Once again, a new feature was introduced for the line—Cyber Keys, which activated special functions on the figures in a manner similar to the Mini-Cons in Armada. Each figure came with a Cyber Key regardless of size, but there were several Cyber Keys crucial to the plot of the anime series which only came with certain figures. Again, many of the same characters were included but with entirely new figures from new molds.

The earliest releases of Energon Optimus Prime have no ridges on the inside of the chest windows and a different head sculpt featuring an Optimus Primal-style mouth-slit in Prime's mouthplate. This was soon replaced with a full mouthplate, and it was this version of the toy which appeared in the Energon cartoon and was released by Takara. Other changes made to Takara's version of the toy involved a chromed front grill, more vibrant plastic colors on Digger-3 and Submarine-4, a darker blue plastic on Prime himself, and more intricate paint operations. Takara's release lacks the electronic sound effects seen in Hasbro's version, which were commonly gutted for the Japanese releases of any Autobot toys who had them, though Prime retains his light-up chest.
His main gimmick, however, is his quintet of "Firebreath Cyclocannons"—spring-loaded dragon-headed missile launchers mounted on an ornate, rotating circular contraption attached to his back/roof. Turning the handle on top makes the backpack rotate and cycle through each cannon, and pressing the handle's button will trigger and fire whatever cannon is at the top/front. When the cannons are cycled through in robot mode, his eyes and windshield-chest light up, and one can alternatively rotate (but not fire) the cannons and activate his light-up features by pushing down on the fake spiky fenders on his stomach. Out of the package, the handle itself comes detached to allow the rest of the toy to fit.

The Power Plus series are similar to the Power series, except these come with the core that unlocks extra features. The Bumblebee figures in this series are nearly the same as the Power series versions (Camaro ‘Bee’s Power Plus figure has his unmasked head), so if you’re going to get them, and you want the cores, go with these versions. If you want Optimus Prime at this size, though, you’ll have to go with this version.
In the war for Cybertron eons ago, Optimus was once Orion Pax, a historical archivist in the Iacon library. Throughout his studies on Cybertron's past, Orion became aware of the social inequality among Cybertron's populace. He became inspired by a gladiator taking the name of one of the thirteen original Primes, Megatronus. Megatronus attempted to start a revolution to overthrow Cybertron's current leadership and take the mantle of Prime. However, Orion preached a different ideology, declaring that violence is not the means to achieve justice, and thus, Megatronus changed his name to Megatron and severed ties with Orion, starting the Great War that destroyed Cybertron. Orion soon ventured into the core of Cybertron and was bestowed with the Matrix of Leadership by Primus, becoming Optimus Prime. After Cybertron became barren and lifeless, he and Megatron took their war to Earth, after which Megatron disappeared for three years. With Ratchet, Arcee, Bumblebee, Bulkhead, and Cliffjumper under his command, the Autobots were granted asylum on Earth by the US government if they kept the Decepticons at bay. However, in "Darkness Rising", the Decepticons return, killing Cliffjumper and target Jack, Raf, and Miko, three children who were seen with Arcee and Bumblebee. Optimus requested they be brought to base and know the full story, much to Arcee and Ratchet's dismay. Megatron returned soon after, wielding Dark Energon and nearly killing Optimus and Ratchet with a horde of reanimated Cybertronian corpses. Optimus later fought Megatron on the latter's space bridge, which Megatron intended to use to bring forth an army of undead to conquer Earth. Though Optimus is nearly killed by Megatron, he is able to gain the upper hand, and leaves Megatron to his apparent destruction when the Autobots destroy the space bridge. However, Optimus later confided in Ratchet that he still mourns Megatron's death, as he had a small glimmer of hope he could be turned to good. However, he does not underestimate Megatron's successor, Starscream.
As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".

Optimus Prime is among the three Autobot figures available to play in the Monopoly Transformers Collectors Edition game.[28] As the figurehead of the entire Transformers franchise, Optimus Prime has been on more pieces of merchandise than can be stated here. Several statues and busts of Optimus Prime as well as Optimus Prime themed objects have been released by various companies since the return of Transformers to prominence, such as the "Optimus Prime Oral Care Station". Other figures released include various PVCs as part of Takara's "Super Collection Figure" line, which were later imported as part of Hasbro's "Heroes of Cybertron" series. Larger "Mega Collection Figure" PVCs were articulated and came with energy axe and gun figures. As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".


An extremely simplified version of Optimus Prime, this McDonald's Happy Meal toy transforms into a trailer-less truck cab. He is formed out of a large percentage of translucent plastic, and can combine with the other Happy Meal Armada toys (Hot Shot, Red Alert, and Smokescreen) into a human (well, robot) pyramid-style configuration, notionally considered a "Mighty Robot".
When Optimus and Hound eventually made their way there, they found that C-81 and his gang of criminals had escaped prison and were combating the Waruder soldiers responsible for the planetary shutdown. Optimus mistakenly assumed that C-81 and his goons were there on purpose, and joined them in fending off the invaders. They were soon joined by Burn Out and Lift-Ticket, who informed the Cybertronians that they had stumbled across the Waruders' main hive. Lift-Ticket explained the Waruders could be repelled if he managed to get a sample of the hive's venom. Optimus was willing to go along with Lift-Ticket's dangerous plan, despite C-81's skepticism. However, the battle came to an end when C-81 managed to grab a hold of the Waruders' leader, and forced the bug into peaceful negotiations. Optimus agreed to allow the Waruders to migrate to another Cybertron via C-81's illegal interuniversal gate, in exchange for a venom sample that would be used to create an anti-toxin to revive the TransTech. The General nonetheless impounded C-81's gate afterwards, though he did let the criminals "slip away" as thanks for their part in thwarting the Waruder invasion.
Prime was perpetually at the forefront of the action throughout the early years of the war on Earth, usually confronting Megatron, though in some rare instances, such as against the Insecticon-controlled Decepticons or the Combaticons, teaming up with him for the greater good. He has suffered his fair share of battlefield scrapes, almost meeting his end when his vital cosmotron component was critically damaged by the Decepticon jets and when Laserbeak had his body disassembled and turned into Decepticon trophies, such as a pet "alligaticon" and a defense laser.
Like the First Edition figure, Battle Command Optimus Prime's truck kibble can be detached from the robot mode figure to form his separate vehicle mode on its own, but there is one single sacrifice is needed to be made, so brace yourselves: you need to actually trim off the wires that activates it's lights & sound gimmick in order to separate the kibble from the robot, so good luck if you wanna risk your hard-earned cash for that.
Optimus Prime is then informed that Megatron has infected the core of Cybertron with dark energon and is given the task to undo the damage done. After rescuing Omega Supreme, Optimus, Ironhide, and Prowl fight their way to the core, but it's too late. The core informs Optimus that it is far too corrupted. It can repair itself by shuting down, but it will take millions of years. By that time, Cybertron will have to become cold, barren, and uninhabitable. The core gives Optimus a small piece of itself, saying it will still survive as long as the piece does. Optimus accepts the burden and the core relinquishes the Autobot Matrix of Leadership.
Another game was released for the Sony PlayStation 2 by Atari; simply titled as Transformers, it was based on The Transformers: Armada. The game's reception was mixed, particularly due to the popularity of a PS2 Transformers game released at the same time for a Japanese-exclusive market, though the Armada game was of a higher quality and featured much better gameplay. The game not released in America was based on the Generation 1 storylines.
In "Sick Mind", Optimus is infected with the life-threatening Cybonic plague, prompting Arcee and Bumblebee to infiltrate the Nemesis to find a cure for the virus Megatron himself created. As Optimus grows weaker, he learns of Megatron's survival of the space bridge explosion. It was Bumblebee entering Megatron's mind via cortical psychic patch and retrieving the cure that saved Optimus. In the next episode, "Out of His Head", Optimus is, surprisingly, saved by the revived Megatron when he intercepted Starscream's attempted nosedive to kill him.

The use of a G1-based Orion Pax design and an Aligned-based Optimus Prime design with Movie Optimus Prime packaging art makes it hard to know where on the wiki this should go, but given the general movie-themed bent of the Tribute line, we're putting it here. Continuing the tradition, the 2-pack was first released in some Asian countries like Taiwan without any prior announcement from Hasbro itself. A few months after the 2-pack's release, Tribute Optimus Prime & Orion Pax saw worldwide release through Amazon, including an Amazon Japan listing bearing a The Last Knight ID number.
The seldom seen 5th season re-airing of the show featured the G1 episodes retold by a stop-motion Powermaster Optimus Prime to the live-action youngster Tommy Kennedy. Although no back story was ever provided for how Prime became a Powermaster, the new sequences are said to take place after the four previous seasons. This indicates that Prime became a Powermaster in the original Sunbow continuity.
The energy of the explosion absorbed by the virus, the Autobots dug themselves out and set about recovering their fellows whom Megatron had used to power the cyber-virus in its early stages. Ironhide passed on a message from Megatron — there was a surprise in store for the Autobot leader. Optimus and some Autobots including Superion sped to San Francisco, where Megatron had unleashed Devastator. As Prime battled Megatron, he took time to save three humans who were threatened by falling debris, only for the humans to turn on him. The defeat of Superion turned the tide of the battle against the Autobots. Prime Directive #4
This toy's design has directly and indirectly influenced numerous others over the years, including many future versions of Generation One Optimus Prime himself as well as new interpretations of the character for Armada, the live-action movie, and Transformers Animated. Redecos of those toys have in turn spread the toy's iconic look to several other characters and many of their subsequent toys: Ultra Magnus, Scourge, and the various Nemesis Primes. Additionally, a toy that was originally intended to be the original Optimus Prime was eventually retconned to be the new character Optimus Primal, bringing Prime's appearance over to that character (and eventually Primal Prime as well.) In Japan, this began a tradition of Beast Era Convoys emulating Prime's look, spawning still more toys that trace part of their lineage back to this one.

Golden Lagoon Convoy is a gold and gold chrome redeco of MP-10 in homage of the original cartoon episode of the same name. He retains his energon axe, ion blaster, and Matrix of Leadership. Part of TakaraTomy's 35th anniversary celebration, he was initially released at Summer Wonder Festival 2018, then later through Cybertron Satellite stores across Japan and TakaraTomy Mall.
Another release of the Reveal the Shield Legends Class sculpt. The deco for its initial release is unchanged from the Transformers release from 2012, whereas the tooling is identical to the 2012 release's running change variant, with the retooled hands and a hole on the back of his head/top compatible with Cyberverse 3mm pegs. Bizarrely, the package art is lifted directly from the Generations Legends Class Optimus Prime/Autobot Roller two-pack's packaging, whereas the stock photos depicted on the back of the packaging are taken from Reveal the Shield Optimus Prime's packaging and only slightly altered, advertising a "Reveal the Shield" rubsign gimmick the toy doesn't actually have. Meanwhile, Hasbro's official stock photos provided to online retailers (including an in-packaging photo) depict the toy with the sword that came with the running change variant of the sculpt's 2012 release, even though the actual toy doesn't include the sword.
In 2007, the Optimus Prime of universal stream Primax 109.0 Beta encountered a mysterious messenger from another world: another incarnation of himself from a parallel dimension who left him with a warning. Two years hence, Megatron would bring the terrifying super-dimensional lifeform known as the "Beast of Time", the Hytherion, into their dimension to destroy Earth. The only thing that could battle the Hytherion was the power of the super-evolved multi-dimensional race of Cybertronians known as the Alternity. Prime agreed that when the danger appeared, he would join the Alternity in the fight.
Part of the new Generations Cyber Battalion series, Optimus Prime is a new mold which stands 7 inches tall, and transforms from a truck (which is based on the Generations Thrilling 30 Legends Class Optimus Prime figure) into a robot in just 7 simple steps. The figure's transformation engineering had taken cues from the Reveal the Shield Legends Class Optimus Prime figure, while it still retains the same ol' articulation.
The subject of Bumblebee’s voice is a bit of a complicated matter. Just as he was the second Transformer ever seen on the original TV show, he was also the second to speak and did so in the loud and clear voice of Dan Gilvezan, who voiced him throughout the original series and animated movie. But by the time we get to the first live-action movie, he could only talk via audio clips because, according to a prequel comic, Megatron had destroyed his voice capacitor during a battle on Cybertron.

Released as part of a collaboration between Transformers and Primitive Skateboarding, this figure is a black repaint of the Titans Return Powermaster Optimus Prime, with the deco somewhat resembling Nucleon Quest Super Convoy, but with some gold trims and Primitive Skateboarding markings partially designed by Primitive Skateboard founder Paul Rodriguez. He also comes with an extra ramp and skateboard accessory that resembles the one Daniel Witwicky used in The Transformers: The Movie, which Shreddicus Maximus (or any other Titan Master) can attach to. The ramp can also form Optimus Prime's gun.
It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
There is one aspect not looked at in the price and that is the shift to model building vs. creation leading to a change in the utility of the pieces. I seem to need many more sets to get a useful variety of pieces these days as many of the sets contain a lot of pieces that are very specific to the needs of the set and are less useful when one wants to create their own designs. It would be a fascinating addition to rate each of the block types on its utility, perhaps by its prevalence in other sets, and then assess each set on its total utility score. So then the question is how many sets would you need to by to achieve different levels of utility and how has this changed over time.
This golden chromed redeco of the Super class Optimus Prime figure was initially offered as a prize to five lucky winners of a colouring contest held in the pages of the TV Magazine. Additional units were later given away via in-store draws at Toys"R"Us Japan; precisely how many is unknown, but the regularity with which the toy appeared on auction sites throughout 2005 suggests it was quite a few.

Optimus found himself carrying into battle many miniature robots and machines to the battlefield in the palm of his hand. Among these was a Micromaster city, Micromaster micro bases commercial, the Race Car Patrol, Micromaster Patrols commercial and the Hot Rod Patrol. He and Jazz checked out the Hot Rod Patrol, and Optimus wondered if they could transform. Hot Rod and Construction Patrol commercial
This retool of Revenge of the Fallen Leader-Class Optimus Prime features the head from Buster Optimus Prime and has had his blades replaced with semi-articulated Battle Hooks for face-destroying action! He has a darker paint job and sports black splotches on his body and head to signify battle damage. However, due to these extra "battle damage" paint applications, some other paint applications that were present on the Revenge of the Fallen release were omitted. He also sports a new voice box in robot mode, replacing the infamous "I am Optimus Prime!" with "We must stop the Decepticons!" The international release, however, retains the same abbreviated "Optimus Prime" sound clip as the original release. To the annoyance of many fans, this version was the main version released just about anywhere outside the United States (all of Canada, Latin America, Europe, and Asia). The box also mentions racing sounds, which may or may not be referring to the button-activated diesel engine noises carried over from the Revenge of the Fallen version of the figure.
The Beast Wars raged on prehistoric Earth, eventually leading to the discovery of the buried Ark sometime after its crash on prehistoric Earth. Megatron, following his namesake's instructions in a desperate gambit, decided to attempt to change history by killing Prime, who was still lying in the Ark in stasis lock. Megatron hoped that this would result in the Decepticons winning the Great War and eventually Predacon control of Cybertron. Megatron unleashed a full-power weapon blast at Optimus Prime's face, near-fatally injuring him. The Agenda (Part III) However, Optimus Primal proceeded to take Prime's spark into his body to protect it from surgical trauma while his injuries were repaired. The subsequent power increase caused by Prime's spark's connection to the Matrix mutated Primal into a large, Transmetal "Optimal Optimus" form. Then, with the repairs complete, Prime's spark was restored, and he briefly activated before sinking back into normal stasis. Optimal Situation

This Optimus Prime is a non-transforming truck that is loaded with a number of gimmicks: Pressing the back button activates his Weaponizer-sque (or Stealth Force-sque) battle mode on his truck form, with the lights being emitted in the same time. He features both spring-loaded (truck front) and pressure-firing (both sides of the launcher) discs, with a flat character art of Slipstream & Sawback being sculpted on it. Optimus Also comes with additional Slipstream and Sawback figurines, which they can be (uselessly) attached on Optimus Prime's truck top & both sides of the launchers.
This Optimus Prime is a non-transforming truck that is loaded with a number of gimmicks: Pressing the back button activates his Weaponizer-sque (or Stealth Force-sque) battle mode on his truck form, with the lights being emitted in the same time. He features both spring-loaded (truck front) and pressure-firing (both sides of the launcher) discs, with a flat character art of Slipstream & Sawback being sculpted on it. Optimus Also comes with additional Slipstream and Sawback figurines, which they can be (uselessly) attached on Optimus Prime's truck top & both sides of the launchers.
This new smaller mold of Optimus Prime features a similar transformation to the original toy. Unlike most transformable figures in this line, Optimus completely lacks 5mm fist holes. Compared to the finalized toy, the product photo on the back of the box has a number of deco differences, most notably silver thighs and white accents above the front windows in addition to those below. The same box photo and the more deco-accurate stock photo (right) also neglect to fold out his fists, which is the only other step in his two-step transformation.
In Transformers: Autobots, Optimus Prime meets up with the other Autobots to give further commands to his troops. Create-A-Bot, the new rookie, is eager to help in the cause, but Optimus tells him to sit back while the other Autobots fight the Decepticons. Create-A-Bot finally defies orders and completes a mission against Optimus's council. After nearly getting himself and the other Autobots killed, Create-A-Bot apologizes to Optimus personally. Taking pity on the newcomer, Optimus lets him off with a stern warning, and they move out together to face Megatron, who has absorbed the power of the Allspark. Optimus fights Megatron, but Megatron gains the upper-hand. Optimus is on the verge of defeat when Create-A-Bot takes the Allspark and drives to Megatron's chest, weakening Megatron but mortally wounding himself in the process. Optimus fights Megatron again, defeating him. As Megatron is on the ground, he tells Optimus that if he kills him, the Allspark will be destroyed and Cybertron will never be restored. Optimus says to Megatron that he will do what he must do, then he raises his sword and kills Megatron, destroying the Allspark in the process. Create-A-Bot also dies, but not before telling Optimus his final request to make Earth the new home of the Autobots and to protect the humans. The game ends with Optimus sending a message to all surviving Autobots taking refuge among the stars.
The line was released as "The Transformers" in the United States, Canada and the UK in 1984 (One year after the Gobots) but Takara was still marketing Diaclone at least during 1984. Hence in Japan "The Transformers" did not debut under that brand till 1985, when the line was also rolled out to the majority of the rest of the world between Takara and Hasbro. Hasbro Europe still will not accept, however, that the range was released in the UK in 1984[citation needed], not even with evidence such as Argos 1984 catalogues containing the range, the UK comic launching in September 1984 or even the 1984 Transformers product catalogue produced by "Hasbro Industries (UK) Ltd, Wokingham". It is thought that Hasbro Europe as it now stands did not come into existence till 1985, hence no records of Transformers sales in 1984.[citation needed] UK Transformers toys were sold in boxes identical to those of their American counterparts until around 1998/9 when the range started to have UK exclusives.
After weeks of Decepticon silence, Optimus Prime decided to get proactive and sent out patrols all over the planet to try and flush the villains out. None of the patrols reported back with any success, however, and Prime realized that there was one area of the planet that his troops had deliberately ignored: the mysterious "Nebulos Triangle". Quickswitch, Scoop and Quickmix were sent into the Triangle, and they did indeed discover and foil the Decepticon plot going on in the area. Decepticons Underground
The cab is yet another iteration of the original Optimus Prime/Convoy toy, based on the Ultra Magnus retool, as distinguished by the elongated hubcap pegs on the front wheels. Indeed, the iPod-aesthetic, all-white deco would make you think this figure should be Magnus, but no, the packaging clearly says "Convoy", making it twice in one year that Takara has released a white-redeco Prime that isn't Magnus.
After step 5, the instructions did not mention that you should fold back the shoulder panels to form the sleeper part until the 11th step. Care must be taken while transforming the legs: the small peg located on the lower leg can be snapped off due to the peg being slightly thick to accommodate with the hole. Also, take note that Optimus Prime cannot wield 5mm weapons with longer posts, as the way that his pinky finger is molded prevents the post from pegging down through his hands. Also, take note that the legs' sculpted small rectangle peg (the one that locks the robot mode legs in place) is prone to warping if care is not taken during transformation.
As one of the first Transform Jr toys, this version of Optimus Prime was released under the early name for the series, Transform Gōkin. As a smaller, simplified version of the original Generation 1 Prime figure intended as a low-cost alternative for younger children, Prime features a similar transformation, with a removable head in addition to fists, but lacks rubber tires and translucent windows. As with most other Transform Jr figures, he lacked any of his major accessories, coming only with his rifle and a cardboard replacement for his trailer that had to be assembled by the buyer.
×