Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.

According to the bio printed in the Transformers Collectors Club magazine, Optimus Prime was a member of the Cybertron Dimensional Patrol, but was abducted by Unicron. It is unknown whether he repainted himself yellow before being abducted or if the recoloration was due to the radiation emanating from Unicron, which has a tendency to recolor Cybertronians.
Main event time! Nitro figures are more like your traditional Generations/Power of the Primes deluxe bots. Standing at 7-inches, they feature increased detail, additional paint applications and all come with a core to unlock additional features. In addition to Barricade, Optimus Prime, and VW Bumblebee (this one’s my favorite of the entire line), the Nitro series will also have a Camaro ‘Bee.

There is another factor that comes with the sticker shock. As I showed before, LEGO has had $100+ sets for a while. However, only recently have they produced sets even more pricy than that. When we were kids, the $100 set was the pinnacle of LEGO. It was the set we all aspired to own. It was the set we all went straight to at the store. Of course we rarely ended up with that set, but that was our dream.
Punch reported back to Optimus on what he had learned about the Decepticons as Counterpunch. Mainly, that they were planning on attending BotCon 2010. Optimus then turned to Teletraan I for more information about BotCon. Upon learning that special honors would be held for him at the convention, Optimus led his troops to BotCon once more. BotCon 2010 Promo
Available exclusively at Hasbro Toy Shop and their booth at San Diego Comic-Con 2011, this version of Ultimate Optimus Prime is presented in vehicle mode, packaged into a large, foil-embossed bubble packaging (similar to late Alternators packaging) styled after Optimus Prime's trailer, with an additional foil-embossed sleeve styled after the hood of Optimus Prime's truck. Exclusive to this release is a set of stickers one can apply to the trailer. The toy itself is otherwise identical to the regular retail release.
Besides the inordinate number of Hogwarts Castles, we can draw similar conclusions from this chart as we can from the Pirate Ship Chart. The prices really have not changed that much in the measurable time-frame2. The weighted average for all the castles is 10.56 cents per piece. As with the Pirate Ships, there does seem to be a general increase in piece count, however.
A redeco of the Super Optimus Prime mold with a primarily red cab, much deeper blue, and a Prime Force uniformly colored in black was planned to be released with Smallest Transforming Transformers Generation 1 Optimus Prime as a Target exclusive. The toy got far enough along in development to have package artwork created by Dan Khanna, which was later revealed online, but it was canceled shortly before making it to full production. Its red, white, and black coloration earned it the festive nickname of "Santa Prime" among fans online.
With the acclaimed Studio Series line marching onward triumphantly into 2019, we have just received a new review of the line’s latest offering, Battle-Damaged Megatron, which most of us know emulates Megatron’s appearance following the climactic final showdown between him, Optimus Prime and the Fallen in the second film. The review comes courtesy of YouTuber PrimeVs.Prime, who has thus far extensively catalogued the line beyond today’s subject. He goes into detail regarding the detailing - Read More
So as a MOC builder, I have found that I tend to design MOCs on LDD and acquire parts as needed for each MOC from bricklink. I now tend to pass on licensed themes. I am especially turned off by the rehashing of many of the Star Wars vehicles. Sets that I buy tend to be Creator sets for my kids or the occasional “special edition” set that appeals to me such as the Sopwith Camel set.
This Wal*Mart-exclusive two-pack pairs the deluxe-size Classics Optimus Prime figure with live-action movie line's Fast Action Battlers Power Hook Optimus Prime toy. Both toys are identical to their original releases, and together represent the Optimus Primes of the oldest and newest generations (at the time) of Transformers, respectively. The movie Prime is designated "2007 Optimus Prime", while the Classics figure is dubbed "1984 Optimus Prime" (referring not, of course, to the toy, which was produced in 2006, but to the character).
In Transformers vs. G.I. Joe comics, Bumblebee is offed as well. His ship is damaged during a space chase with Starscream, so he lands on Earth where G.I. Joe and Cobra are going at each other (as per usual). But his fatal mistake was helping G.I. Joe favorite Snake Eyes, who was trying to take on Starscream. In the process, Bumblebee got in the Joe-Cobra crossfire and was ripped apart by missiles. This wasn’t a true death, however. First, Starscream took Bee’s head to Megatron, who wore it on a necklace (yes, really), but eventually the head got back to the Autobots, who planted it back on his repaired body and he came back to life.
Hot Rod only appeared three more times: once when he gave the Matrix to a Quintesson-controlled Optimus Prime. When he lost the Matrix, Rodimus was forced to face down his fears once and for all when the Decepticons began a series of attacks on Japan. Overwhelmed by the different responsibilities and directions he was being pulled in, Rodimus went joyriding and was attacked by the Stunticons Dead End and Wildrider, losing the Matrix in the ensuing crash, which was acquired by the Scourge, one of Galvatron's minions, the Decepticons' tracker and leader of the Sweeps. While Rodimus became Hot Rod again – and was not eager to change back – Scourge was warped and enhanced by the Matrix and led another attack on Japan. Counseled by a martial arts master on giri – the burden hardest to bear – Rodimus realized that the Matrix was his burden, and that he had been chosen to bear it; battling Scourge, he recovered the Matrix and resumed his role as leader, and finally when Optimus Prime was resurrected, Rodimus Prime was able to return to being Hot Rod for good. In all three occasions, his return to Hot Rod took place because he lost or passed the Matrix to someone else.

IDW's Transformers Collectors Club exclusive comic story, Revelations part 6, is set after the defeat of Galvatron, but before Optimus Prime's mission to start a new Space Bridge project. In this story, the Autobots from the IDW series Robots in Disguise, Optimus Prime, Ultra Magnus, Sentinel Maximus, Downshift, Perceptor, Alpha Trion, Over-Run, Anti-Blaze, Checkpoint, and Scythe, meet the Autobots from the animated series, Cybertron Optimus Prime, Jetfire, Override, Scattorshot, Red Alert, Hot Shot, Lori, Bud, and Coby Hansen, and thank each other and remembering those who were lost in the battles.[40]
Voyager figures all feature a spring-loaded MechTech-style transforming weapon, partially constructed from translucent plastic, which lights up via LED when the weapon is deployed. The figures themselves also feature translucent plastic, so the moving LED creates the image of energon power "flowing" from the character's bodies into their weapons. This worked better in theory than in practice. Internally, these figures were referred to by Hasbro as "Powerizers".
A movie tie-in game for the sequel to the 2011 movie Transformers: Dark of the Moon was released a few weeks prior to the movie on June 14, 2011 (the movie is set to be first screened on July 1, 2011). It has similar gameplay and features as that of the War for Cybertron game as it's made by the same developers, High Moon Studios. The game takes place on Earth just two years after the events of Revenge of the Fallen and will focus on both factions in their "final battle". Adjustments to the previous concept of the game had been made, including the online multiplayer where you can customize iconic characters appearance, abilities and weapons rather than the unknown transformers that were in the game prior to this one by High Moon Studios where you could only customize the appearance, abilities and choose the weapons.

Undeniably, the most iconic of Bumblebee’s alternate modes is his original: the small but always reliable classic yellow Volkswagen Beetle. It was evocative of his personality, always striving to go above and beyond what everyone perceived to be the limits of his size. These days, thanks to the Michael Bay live-action movie franchise, he’s known as a modern Chevrolet Camaro, which looks cool but as a strong muscle car deviates from his personality. At least it’s still yellow? Bay says he didn’t want him to be a Beetle anymore because there was already an iconic movie Beetle: Herbie the Love Bug.
This release of Buster Optimus Prime was susceptible to a paint scraping issue on the silver painted slide-out barrel of his blaster. This problem was fixed for the DOTM Re-release by relocating the silver paint app from the barrel to the inside wall of an exposed gas tank that had been previously left as unpainted grey plastic. The black paint app on the barrel was left unchanged.
The Masterpiece Optimus Prime toy was featured in a print ad for Nokia 6820 phones in December 2004.[19] He is posed bent over to look at the phone and scratching his head. Pleasantly, most of the pose pictured is perfectly possible with an un-kitbashed, un-Photoshopped version of the toy. (The real toy can't bend forward at the waist like that, alas.)
In the interim year, with the Decepticons defeated, the Autobots entered into an even closer relationship with Earth. The Autobots also began the colonization of other worlds, the first of which was the planet Athenia, where Optimus Prime was stationed. It soon became apparent, however, that the consequences of releasing the energy of the Matrix to cure the Hate Plague were more far-reaching than Optimus had anticipated. Without the energy of the Matrix to act as a balancing factor, Vector Sigma had become destabilized. The Decepticons suddenly returned to exploit this, assaulting Cybertron in order to seize control of the mega-computer. Prime took a squad of troops to aid in the battle on the planet. When the arrival of the Autobot Headmasters tipped the battle in their favor, Prime broke off from the main attack and headed down into the depths of the planet, planning on stabilizing Vector Sigma at any cost.
Optimus Prime grew concerned when Hound picked up a communication from Laserbeak that indicated the Decepticons had grown interested in a mysterious structure near a human village. Prime and a team of Autobots headed out to investigate, and they battled the Decepticons over the structure, which turned out to be a harmless windmill. Laserbeak's Fury

When Bumblebee, Hound and Spike brought a badly-damaged Starscream back to the Ark, Optimus struggled with the ethical implications of allowing Wheeljack and Ratchet to mess with the Decepticon's logic circuits, but gave them the go ahead. Starscream proved to be amnesic, and Optimus was able to take the opportunity to help him as much as possible, even physically preventing Megatron from retrieving his former lieutenant when Starscream opted to stay with the Autobots. Though Starscream left as soon as he regained his memory, Prime reflected that they'd learned that maybe it was possible to reason with a Decepticon. Redemption Center
Like the First Edition figure, Battle Command Optimus Prime's truck kibble can be detached from the robot mode figure to form his separate vehicle mode on its own, but there is one single sacrifice is needed to be made, so brace yourselves: you need to actually trim off the wires that activates it's lights & sound gimmick in order to separate the kibble from the robot, so good luck if you wanna risk your hard-earned cash for that.
While the other Autobots searched for the Matrix on Earth, Optimus Prime searched for Vector Sigma, guided through the dangers of the planet's catacombs by the spirit of Alpha Trion. Prime eventually arrived at the computer, only to find his way barred by Cyclonus and Scourge. At that moment, Hot Rod arrived with the Matrix, the same with which Alpha Trion merged, re-energizing it. The Matrix transformed Hot Rod back into Rodimus Prime and, for the first time, the two Primes fought side-by-side and defeated Galvatron. Before Rodimus could implement the Matrix to stabilize Vector Sigma, however, Optimus Prime merged himself with the computer, restoring its balance to save the planet. Optimus Prime sacrificed himself, dying again only a few short episodes after his rebirth. Later, Prime would make a final and permanent return in the Japanese Transformers continuity, Battlestars: Return of Convoy. This entry was only available in print, appearing in the TV Magazine, a Japanese publication.
Later, Optimus pursued Megatron to Earth to stop him from pillaging the planet's energy resources. Prime's loyal team of Autobots clashed with Megatron's Predacons on many occasions, stopping their schemes with the aid of Koji, a human whose father had been abducted by the Predacons. Prime and Koji went on to form a strong friendship, although Prime blamed himself for Koji's father's abduction. Optimus proved his bravery on many occasions, battling and defeating Sky-Byte in an underwater duel and personally rescuing Side Burn from a Predacon trap. Later, when Megatron targeted a tanker truck to scan as the alternate mode of the final protoform, Optimus Prime leapt into action in order to save the truck's human driver and, as a result, the tanker, Prime and the human were all scanned. With an infusion of Megatron's spark energy to complete the concoction, Scourge was born, emerging from his pod as a dark twin of Optimus Prime. Prime's pleas to make Scourge remember his original Autobot loyalties fell on deaf ears.
There is some difference of opinion on how the super mode of Leader Class Optimus Prime is supposed to assembled. Takara toys and the television series portrayed with the wings up and his two large guns underslung, however Hasbro later sold the toy with pictures and instructions having the wings down and the guns over the shoulders. Commercials and repainted models by Hasbro went back to the way Takara assembled the super mode. In 2006 a Costco exclusive of Optimus Prime packaged with Wingsaber and a DVD (with Armada Supercon Optimus Prime printed on it!) of the episode United was sold, again with the wings-under gun-over super mode. In Japan a gold chrome edition of this toy was released as a Lucky Draw special.
As yet another in an increasingly large number of reissues of the original Generation 1 Optimus Prime toy, this entry in the Japanese-exclusive The Transformers Collection line of reissues added a few extra goodies to spice things up. Chiefly, the figure was armed with a new energon-axe, based on the weapon used by Prime in the Generation 1 cartoon episode, "More than Meets the Eye, Part 2", which plugs into either of the headlight-holes that normally accommodate Prime's fists. Additionally, Prime came packaged with a ring binder folder designed to hold the pull-out character file sheets that were included with all the other Transformers Collection reissues. Notably, this figure reinstated the original, thick version of Prime's rifle as the standard for all future Japanese reissues.
"Special Edition" Optimus Prime is a redeco of the Classics multi-pack toy, featuring some minor paint detail changes, bluer translucent plastic, darker and cooler gray plastic, and darker metallic flake red and blue plastic, with his (previously black-only) rifle body most notably now being cast in both blue and black plastic. He came in special "book box" style packaging with black-and-white boxart, and was only available at retail in Australian and Asian markets. North American customers could later buy him via Hasbro Toy Shop.
Adventure Lucky Draw Optimus Prime is a gold vacuum metalized redeco of the original Warrior Class figure (save for some of his unpaintable thighs & upper shoulders) released as a prize for the Transformers Adventure prize draw campaign held between 25 July 2015 and 30 September 2015. To obtain it, entrants needed to send in four robot points clipped from the packaging of Transformers Adventure products.
When the warlord Shokaract, powered by Unicron's Dark Essence, traveled into the past to secure his own future, the occupants of J'nwan decided to act. Optimus Prime, Megatron, Soundwave, and Grimlock joined Sandstorm on prehistoric Earth during the time of the Beast Wars where the battle with Shokaract had already begun. When the Covenant arrived to vanquish the Dark Essence and defeat Shokaract, Optimus Prime and the others escaped through portals as that timeline was erased from existence. Terminus Departure
Walmart have uploaded a very nice commercial via their YouTube Channel that we are sure will please your optics. What is it about? This video features several famous and iconic cars like KITT from “Knight Rider”, Ecto-1 from “Ghostbusters”, Lightning McQueen from “Cars”, the Mystery Machine from “Scooby Doo” and even Fred Flintstone’s footmobile. As some of you should expect, our small yellow hero is present here in his Bumblebee Movie VW Beetle design, and with an impressive entrance emulating Ironhide’s jump from the 2007 live action movie.

Dark of the Moon Voyager Class Optimus Prime is an all-new mold. He features heatshield details in his sculpting and translucent solar panels on various parts of his body, and huge gas tanks. Optimus himself is differently proportioned, having larger feet and a smaller torso and arms. He also features some faux-kibble/parts: His actual windshield chest is being covered by a sculpted panel featuring his characteristic deformed windshield-chest, and a pair of sculpted tires on his thighs. His pair of optics is designed to have a light-piping gimmick, but it was rendered useless since it was painted in smoke gray on top of the colorless transparent plastic.
When Highbrow was captured by the Decepticon leader Scorponok, Optimus Prime agreed to surrender himself to ensure his fellow Autobot's safety. Naturally, though, Prime did not expect Scorponok to hold up his end of the bargain, and he had Hosehead and Fizzle rescue Highbrow while he allowed himself to be imprisoned. Their mission successful, Hosehead and Fizzle then sprang Prime from his cell, and the team beat a hasty retreat. Autobot Hostage
Later, Optimus pursued Megatron to Earth to stop him from pillaging the planet's energy resources. Prime's loyal team of Autobots clashed with Megatron's Predacons on many occasions, stopping their schemes with the aid of Koji, a human whose father had been abducted by the Predacons. Prime and Koji went on to form a strong friendship, although Prime blamed himself for Koji's father's abduction. Optimus proved his bravery on many occasions, battling and defeating Sky-Byte in an underwater duel and personally rescuing Side Burn from a Predacon trap. Later, when Megatron targeted a tanker truck to scan as the alternate mode of the final protoform, Optimus Prime leapt into action in order to save the truck's human driver and, as a result, the tanker, Prime and the human were all scanned. With an infusion of Megatron's spark energy to complete the concoction, Scourge was born, emerging from his pod as a dark twin of Optimus Prime. Prime's pleas to make Scourge remember his original Autobot loyalties fell on deaf ears.
Replacing the weapons of the Hasbro releases, these new Mini-Cons transform into their larger parnter's signature weapons. They came as unassembled, unpainted model kits, similarly using stickers to fill in details. Several Arms Microns also came by themselves in bagged kits, plus there was a metric ton of promotional Microns throughout the line, possibly more than any prior line (even Micron Legend!), and that's not counting the ones that were released during the First Edition series. The Arms Microns also had multiple 5 mm posts and holes, and could be combined into super weapons, plus the larger toys were retooled to have new Arms Micron mounting points.

This new smaller mold of Optimus Prime features a similar transformation to the original toy. Unlike most transformable figures in this line, Optimus completely lacks 5mm fist holes. Compared to the finalized toy, the product photo on the back of the box has a number of deco differences, most notably silver thighs and white accents above the front windows in addition to those below. The same box photo and the more deco-accurate stock photo (right) also neglect to fold out his fists, which is the only other step in his two-step transformation.
Part of the first wave of Prime Series 2 Cyberverse Commander Class toys, Optimus Prime is a smaller-scale toy, and features translucent plastic for his torso so that the toy can be illuminated using the electronic lights featured in the larger playsets. He comes with two translucent "battle cannon" weapons which feature multiple 3mm posts and ports, allowing them to be held by his hands, or store/mount onto numerous ports on his person. Additionally, he features a 5mm port for a trailer hitch.
The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.
Early in this new series of encounters with Megatron, Red Alert contacted the Autobots on Earth and asked for Optimus Prime to join then on Velocitron. Ransack and Crumplezone tricked Hot Shot and Dirt Boss into believing that a race between them would determine which of them would be allowed to race Override for the Planet Cup. During the race, Ransack and Crumplezone caused a rockslide that buried Hot Shot. Hot Shot was saved when Optimus Prime, Vector Prime, and Landmine arrived, but Optimus was upset that Hot Shot had become involved with the locals. Clocker and Brakedown were eager to help the Autobots. After being unable to obtain the Planet Cup from Override herself, Optimus Prime endorsed Hot Shot's plan to win the cup in a race with the aide of the other Autobots. Ransack and Crumplezone were contacted by Megatron and were told to keep on eye on things. They also decided to enter the race, either to win the cup and cause as much damage as they could to the other racers. Override, Dirt Boss, Ransack, Crumplezone, Optimus Prime, Hot Shot, Red Alert, Landmine, Clocker and Brakedown participated in the qualification round. In the final episode of Transformers: Cybertron, Optimus Prime proposed a new Space Bridge project using the power of the four Cyber Planet Keys and the four great Cybertronian ships. Many Autobots and former Decepticons joined in the project. Jetfire was left in charge of Cybertron as Optimus Prime led the Atlantis with the Earth Cyber Planet Key, joined by Red Alert, Safeguard, Scattorshot, Leobreaker, Menasor, and Heavy Load.

For Transformers: Age of Extinction, Optimus Prime initially transforms into a rusty 1973 Marmon semi cab-over truck and later on a new alternate mode in a blue and red Western Star 5700 Custom semi-truck.[31][32] After humanity turns on all Transformers, regardless of faction, Optimus and the other Autobots go into hiding. Eventually, they find themselves being hunted by a rogue organization called Cemetery Wind. Optimus is severely injured in a trap set by the group, while many of the other Autobots, including Ratchet and Leadfoot, are slain. An inventor, Cade Yeager, comes to Prime's aid and helps restore his health. After uniting with a small band of Autobots, Optimus faces Lockdown, a ruthless bounty hunter allied with the humans, and KSI, an organization that produces man-made Transformers. Optimus is captured by Lockdown, but the Autobots rescue him. Optimus is quickly losing faith in humanity, but at the urging of Cade, chooses to stay and fight a resurrected Megatron and his new army. Prime awakens the ancient Dinobots, and rides a newly tamed Grimlock into battle through Hong Kong. He kills Lockdown and Harold Attinger at the film's climax as revenge for killing many of his friends, including Ratchet and Leadfoot. At the end of the film, he leaves Earth and flies off into deep space, seeking to find out the truth about his mysterious Creators.[33][34]
Following a battle which left him grievously wounded, Optimus Prime's entire structural integrity and circuitry processors were reprogrammed into a sleeker, stronger, combat-ready configuration. With a new giant laser-targeting rocket launcher, ripple-fire missile blaster and armor-piercing discs, Optimus was ready to immobilize Megatron once and for all.
Oddly, he had a different plate in those films when in car mode: 900 STRA. In Dark of the Moon, they finally decided to keep his robot and car mode plates consistent. In robot mode in the Dark of the Moon and Revenge of the Fallen video games, he wears 5BBM2. 5LKZ213 was seen in some set photos of robot mode for the first film. Various models for promotional exhibits have featured KDM 0814, FXPERTS, and, of course, BUMBLBE.

Part of the first wave of Generations: Combiner Wars Voyager Class toys, this is a bigger, bulkier incarnation of Optimus Prime with a striking resemblance to Ginrai. He comes with two blasters which he holds via 5mm post. One of the guns is based on his trademark Ion Blaster, and both weapons store on the back of his vehicle mode as a makeshift engine block. His torso mode has several details that appear to be influenced by Energon Optimus Prime's super mode, including the head, chest, and thighs. In particular, the chest details are modeled after the Spark of Combination. He also features two pair of fake windows on his robot and gestalt chest halves. The combiner head can be used as a robot mode head if you're feeling silly.


Optimus Prime narrated the events of what happened before the Ark crashed on Earth. He became the new leader of a long line of Autobot leaders via the discovery of the Matrix. On their quest for more Energon, the Autobots were chased by Decepticons to the planet known as Earth and crashed on it. When they emerged from the Ark, Optimus Prime scanned his truck altmode, stating that the war would not end on Earth. Action Blast 1
Rodimus can be unlocked by beating "Dam 6" in Arena Mode, credited as Hot Shot. Rodimus is described as being young, impetuous, showing enthusiasm and confidence which borders on arrogance. He boldly claims that he has both skill and looks, though he is not too keen being paired with Kup on missions. Somehow, he became corrupted by Dark Energon. If the player manages to defeat him, he calms down, shrugging off the effects of the Dark Energon and returning to his regular self.
Part of 9th wave of One-Step Changers, and the first of the Combiner Force subline, this Optimus Prime is yet another new mold, with a different transformation scheme (a similar engineering to Age of Extinction's Bumblebee) consisting of pulling the switch on the back (do not hold the truck kibble when you transform him). Like most One-Step Changers, Optimus Prime features limited articulation on the shoulders, and features 5mm compatible hands.
This reissue of the original Generation 2 Laser Optimus Prime figure was made using the modified version of the mold created for Robots in Disguise Scourge, lacking the sculpted Generation 2 Autobot insignias on the disks featured on the original. It sported a modified deco, with the flat grey plastic on both the trailer and Prime's chest now replaced with silver chrome; additionally, new Autobot symbol tampographs were added to the doors of Prime's cab mode and the front end of his trailer, and a pair of new chest-window stickers featuring an illustration of the Matrix of Leadership replaced the original decals.
The Joes discovered a cavern where the people of Cobra-La were growing metal-eating spores as a last defense against Unicron. Flint and Cosmos took a load of the spores into space just as Unicron appeared in Earth orbit. Prime, Hawk and Colton headed deeper into Cobra-La to rescue Firewall and kick butt. Prime was tackled and pinned by a giant bug creature, but made a dramatic recovery and tossed the bug aside. He then took the machine-hating Cobra-La leader Golobulus to task with a single punch. Flint and Cosmos released the spores, which devoured Unicron from the inside and defeated the giant Transformer before he could harm Earth.
LEGO is not a cheap toy and has never been. The brand has stood for nothing but the highest quality and hopefully any issues it has had with changes in manufacturing are only the result of temporary growing pains. Next time you are out buying a LEGO set for a loved one or for yourself, take a second to thank everyone who ever bought one for you as a gift.
Offered as part of a Lucky Draw campaign in August 2004, this extremely rare version of Masterpiece Convoy is almost entirely vacuum-metalized gold, lacking any other painted detail or stickers. The parts which are not viable are molded in a flat golden plastic; the only exceptions are its rubber tires, the core of the Matrix and the energon-axe, which remain black, blue and orange, respectively. Whether or not the figure was intended to evoke Optimus Prime's entirely-golden appearance in the cartoon episode "The Golden Lagoon", when he was coated with electrum, is unknown; given that entirely chroming a figure gold is a fairly standard deco for Lucky Draw figures, it may just be happy coincidence more than anything else.
In the event that Windcharger successfully turned the Decepticons’ forcefield off, reinforcements burst into the base just as Megatron was strike Optimus from behind. A wayward shot from Megatron then revealed the location of the gravity gun to the Autobots. Optimus ordered his troops to charge the weapon. Hook caught Optimus in the gravity gun’s sights, and sent the Autobot leader floating upwards.
Prime was brought back to the Autobot base for treatment, but the Decepticons exploited the Autobots' lack of manpower and struck again before Prime recovered. With his men taking a pummeling, the unconscious Prime had a vision of Akira, who spurred him on to awaken and rejoin the battle. With another power boost from Wataru, Prime unleashed a super-charged shot from his ion blaster that took down the fleeing Decepticons. Time of Resurrection
As with other earlier Cyber Series figures, Optimus Prime had a rather strange release cycle. At first, he only retailed exclusively in Asia and Latin America, with the closest to a U.S. release being in limited quantities from online retailer BigBadToyStore.com. He did, however, end up being available in the Universal Studios Theme Park, and also later as a Walgreens exclusive.
The First Edition Voyagers were never released in the US, forcing buyers to import him from Canada or Japan... at first. ToysЯUs later picked up this toy, along with most of the "First Edition" line, as part of a huge block of US market exclusives for holiday season 2012. This second run introduced a deco variant, in which the red paint on, beside, and below the truck side windows is omitted, revealing the patch of brown plastic underneath. As he is packaged in robot mode, with his front wheels and shoulders covering said patch, the only way to identify which version is which while in the box is by looking at the hinge joints beside his two painted torso lights, with the center portions of the hinges being unpainted brown on the variant. All releases of this mold also have a minor issue with the truck mode windvane/robot mode heels refusing to connect solidly to the truck cab in vehicle mode, leaving a visible gap above Prime's windshield.
↑ The African American entrepreneur: then and now By W. Sherman Rogers page 321. Books.google.com. http://books.google.com/books?id=mbTUorcuXkoC&pg=PA321&dq=%22generation+2%22+transformers&hl=en&ei=woyoTPq8KI7hnQeIwOWjDA&sa=X&oi=book_result&ct=result&resnum=5&ved=0CD8Q6AEwBA#v=onepage&q=%22generation%202%22%20transformers&f=false. Retrieved 2011-04-04.
Excellent article. Especially for pointing out how different we remember things from ‘when we were kids.’ (I swear Optimus Prime was two feet tall!) My only criticism is linking to those two Brickset articles about supposed “quality decline”… the headlines are sensationalist and inflammatory, and a LEGO rep eventually replied to the spurious claims with information that deflates much of the (somewhat unfounded) criticism. Also the comments give me a headache. Otherwise great stuff!
Part of the fifth wave of Kabaya's revival of the Transformers Gum series, this snap-on transforming model kit of War for Cybertron Optimus Prime is sculpted from red, light blue, and gray plastics, and uses stickers for detail. He comes with a blue non-transforming version of his hand-held blaster rifle, which mounts at the rear in vehicle mode. He comes packed with a model kit of Tigerbreast, and a stick of gum.
When I was a child in the 1960s, I bought most of my own Lego, using money from paper routes I had from the ages of 7-16. But the items I bought we not ‘kits’. They were small boxes of standard bricks. Each box contained only a single shape and colour, but you could find most of the basic shapes 1×1 or 1×2 or 1×4 or 1×8, 2×2 or 2×3 or 2×4, bevels, doors or windows, if you found the right box. The boxes were only 50 cents, and had an average of 12 bricks per box. That works out out to about 4-5 cents per brick. The kits were expensive, but buying the standard boxes was a lot cheaper, and that is what most people did back then. With my paper route, at the age of 7 I could buy 100 pieces per week using my own money. Name any 7 year old that afford to do that now!
Or instead of adding a surface to the package, sell it with its own little plaque / platform. A really thin piece of hard plastic or something that is smooth as well as possibly having a graphic or something printed on it. And then market it as a collectible and only make so many of them. I'm thinking in the price range of $199-$299. I'm not sure the costs going into it, so I can't say.

When the narrative begins, we’re taken to Cybertron, where a narrator tells us of the battle between the Autobots and Decepticons, a war fueled by the Decepticons’ desire for total domination. We’re told, “The Autobots, on the verge of extinction, battled valiantly to survive.” Then, two Autobots in robot form climb out from under a grate, armed with a bunch of energy conductor sticks: Wheeljack and Bumblebee. Wheeljack transforms into a Cybertronian vehicle, then Bumblebee loads the sticks inside him. Bumblebee is so relatively small that he remains in robot form and hops inside Wheeljack for a ride, rather than transform himself.

When the Ark's sensors picked up two Transformer power emissions in the Brazilian rain forest of non-Decepticon origin, Optimus headed into the field to investigate, bringing along Jazz and Blaze. Though their search went poorly at first, the surrounding vegetation interfering with their energy trackers, one of the mystery Transformers soon found them! The source of the readings turned out to be two terrifying robot dinosaurs! As Optimus charged one of them, Megatron and his troops turned up, and blasted the Autobot leader unconscious. He awoke to find the Decepticons fleeing in defeat, and the creatures transformed into their Autobot forms. Grimlock introduced himself and Snarl, but told Optimus that they wouldn't be following the Autobots back to home-base, as they had two more companions to unearth first. Optimus bid him farewell with a handshake before leaving to carry on the war against Megatron. The Dinobots!
Optimus was checking up on the Autobots' ongoing energy collecting campaign when Wheeljack informed him that a disturbance in Sector 33HM of space-time would eventually cause major problems in its time-stream. Optimus assigned the investigation of this disturbance to Bumblebee, then noted that Hot Rodimus had not completed his latest report, communications with the young Autobo having been lost while he was on his own mission. With a brief inspirational speech, he urged his subordinates to redouble their efforts in maintaining harmony throughout reality. Little did Optimus suspect that in his own universe, Megatron was planning a coup against the Autobots... Uprising

A large, non-transforming toy that features light & sound effects and voice tracks by Peter Cullen. The figure itself is a representation of Optimus Prime combined with Jetfire's parts - only designed for younger children. A lever on his waist extends his wings, and flying sounds are emitted when he is moved around off the ground. The Power Bots line replaces the 2007 Cyber Stompin' line of the first film.


The price per minifigure has definitely gone up in the past 5 years. You used to be able to get 4 minifigs (along with some other stuff) at the $9.99 price point, now these are $12.99. And there are fewer minifigs in most $19.99, $29.99, etc. sets now. Lego Minifigures Series 1 was $1.99 each, subsequent series $2.99 each – I know it’s supply and demand, but it still feels kind of exploitative. I admit the cleverness of the builds keeps improving though.

An exclusive version of Titan Class Metroplex was made available at San Diego Comic-Con 2013. He comes with 12 small, non-transforming figurines of Orion Pax, Megatron, Bumblebee, Thundercracker, Trailcutter, and Hoist, all in both modes. The figurines are based on their Thrilling 30 Generations Deluxe Class toys, and similarly to Decoys, the Autobot figurines are cast in red plastic, and the Decepticons in purple.


Calibur Optimus Prime is a retool of the Armor Knight Optimus Prime figure, who is a retool of the original Age of Extinction Leader Class figure, with the fifth wheel hitch now forming his handheld shield based on the one used in Dark of the Moon, which results in a backpack-less robot mode. He also comes with an axe based on the one used in the third film.
Released in the latter stages of the Cybertron toyline, this redeco of the Leader-class Optimus Prime figure introduced a new colour scheme that several other tail-end releases would emulate. Taking its name from the Japanese version of Cybertron and with a bio noting that this new body depicts Prime after he embarks on his galaxy-spanning mission at the end of the Cybertron cartoon, "Galaxy Force" Optimus Prime replaces the original toy's blue parts with black and the translucent blue with smokey clear, and moulds several—but not all—grey parts out of red plastic, including the toy's rifles, rail gun covers, missile launchers, and Super Mode leg guns. In the realm of new paint operations, Prime now sports all four Cyber Planet Key symbols on his shoulders, and his unique Matrix-shaped Cyber Key (now with the code lo9x) finally has a gold-painted border, as it had always had in Japan. Additionally, Prime's hip joints were tightened up with this release, making it easier to stand him up in Super Mode.
Though he was packaged on an individual box, he was initially sold as part of a set with Dark Energon Megatron. He was eventually made available on his own, and all of the Dark Energon Series toys were eventually made available in Singapore as mass-retail releases. The Voyager Class toys, in particular, also saw mass-retail release in the Philippines.
Optimus was made available as a mail-away toy in the "Digital Doom on the Highway to Destruction" offer in the US in 1986 to coincide with the Transformers movie in 1986. He cost $21.50 and 5 robot points, and came with a special Movie Edition Certificate and a round sticker that read " Movie . Edition . Transformer" with the Autobot symbol in the middle. (This item is considered rare.)
Limited to 10 pieces, this gold chrome redeco of Evasion Mode Optimus Prime is released as part of the Transformers Battle Command Campaign given away to ten winners via a lucky draw. The initial phase for entry was operated in July 2014, when those wishing to enter the draw had to mail in the proof of purchase from the Takara-Tomy Lost Age Optimus Prime. The actual mailing out of prizes was to take place in November 2014.
General Optimus Prime hailed from Primax 096.0 Beta. Ask Vector Prime, 2015/09/06 During the third Cybertronian war, General Optimus Prime profile card he fought on Earth against Megatron: in the Battle of Sherman Dam, the two fought directly but the battle would have gone against the Autobots if not for the arrival of the Dinobots. Ask Vector Prime, 2015/09/06 In the latter stages of the war, he upgraded himself with heavier armor and weaponry in order to match Megatron's flight and combination upgrade.
You've got to love it when Amazon tries to be coy by sticking with code names while giving us a full look at the figure. That doesn't seem to be changing any time soon, the latest cases being our first look at stock photos of two Cyberverse Scouts on Amazon.com.au. This time around it's Ratchet under the name "Aces" and Shadow Striker under the name "Rockhounds". We got a look at these two in bot mode at New York Comic Con and later we got CG pictures, but this is our first look at both modes - Read More
This, of course, is all secondary to the main draw of the figure: it pulls an all-white trailer, which transforms into a working iPod speaker dock by rotating a substantial wedge of its full length 90 degrees . The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer. Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor with advice from an electronics specialty shop is recommended.
Part of the first wave of the "Mini-Con Weaponizers" subline imprint, this One-Step Changer figure of Optimus Prime is a new sculpt. In the Robots in Disguise mobile game, it was identified alternatively as an "Advanced One-Step" or "Evolved One-Step" figure depending on the user's region, but on the toy's packaging, no such modifiers are featured, and it is available as part of the regular One-Step Changer assortment. This figure shares most of its engineering with One-Step Fracture.
This new smaller mold of Optimus Prime features a similar transformation to the original toy. Unlike most transformable figures in this line, Optimus completely lacks 5mm fist holes. Compared to the finalized toy, the product photo on the back of the box has a number of deco differences, most notably silver thighs and white accents above the front windows in addition to those below. The same box photo and the more deco-accurate stock photo (right) also neglect to fold out his fists, which is the only other step in his two-step transformation.
Although peacetime in the decade that followed the apparent deaths of Unicron and Galvatron afforded Prime the opportunity to train his own elite squadron of Autobots the martial art of Kumite. The re-emergence of the war, however, forced him to return to his role as commander. The conflict for control of the Mini-Cons and the truths he was forced to face in his confrontation with Unicron seems to have changed him. Optimus Prime, Grand Convoy' in the Japanese version, was now a stern, more direct commander and shows little of the conflict that held him back before. Despite this, he is still known to make the same kind of decisions, which include an emphasis on team work and the foundation of the Autobot values.
When a new threat, the Elder Gods, appeared, a group of Autobots acquired the help of Tobias Muldoon and Nikola Tesla to travel to the glacier and waken Prime. Infestation 2: The Transformers #1 Tesla's Tesla tower wasn't enough on its own, so Wheeljack, Ratchet, Trailblazer, and Hound gave energy necessary to recharge Optimus Prime. Optimus awoke and revived the other Autobots with his energon reserves, before traveling to Port Cenotaph, Nova Scotia where an Elder God had risen from the sea. Diving into the ocean, Optimus cleaved parts off the Elder God until it and its followers returned to the depths. Though Tobias asked if the creature was dead, Optimus wasn't sure, but promised the Autobots would be there to defend Earth if it ever returned. Infestation 2: The Transformers #2 Infestation 2 #1
This Optimus Prime is a redeco of the figure above, featuring red wheels and various Tech Spec-sque patterns on the legs & chest which can be decoded with their transparent red weapons, which is molded in a sprue similar to the ones used for the Arms Microns kits & Robots in Disguise (2015) Mini-Con figures. He can use any weapons included in this set, although his primary weapon is an axe.
The TakaraTomy release of Optimus Prime has considerable differences from the Hasbro release. His blue and red plastics are darker and metallic, his translucent blue plastic is darker, and a few of his paint operations have been omitted and replaced with customer-applied foil stickers, such as his shins, feet, headlamps, and insignias. His legs, outer forearms and truck mode "sleeper cabin" side panels have been retooled to include 5mm post-holes as part of the line-wide "Arms Micron" gimmick. As such, he does not come with the Hasbro version's weapons, but instead an Arms Micron partner named O.P. who transforms into a weapon resembling Optimus's in-show blaster cannon. This version of the mold was also used to make Prime Nemesis Prime.
Another version of Prime was also available in the second wave of the Smallest Transforming Transformers series as a chase figure. This almost entirely white version of the figure is clearly based on the version of the original Prime cab robot used in the Generation 1 Ultra Magnus figure, but was nonetheless sold as Optimus Prime for the Smallest line.
×