Optimus made his way to the Primal Basilica, where he found Perceptor standing over the Mistress of Flame's battered corpse. Unable to do anything for her, Prime activated the Basilica's defenses as a means of stalling Trypticon. Learning from Perceptor that Rodimus had given up the Matrix, the two entered the chamber of the Chorus of the Primes to have the Matrix returned to him. Desperate Actions However, Optimus revealed the Matrix was not for him, but rather for Perceptor, as he wanted to make sure it would be taken as far away from Trypticon's grasp as possible. He guided Perceptor to a secret exit from the Basilica and sent the scientist on his way. Run for Our Lives Warned by the Chorus to "beware the power of the Primes", Optimus charged back towards the battlefield and began attacking Trypticon, rescuing Victorion. Optimus led the Combiners in battle against Trypticon, but the Titan managed to hit him, sending him hurtling towards some sharp rubble. Thankfully, he was caught at the last moment by Fortress Maximus. In Good Hands
The BK tie in toy of Optimus Prime is essentially two toys in one. The first part of the toy consists of two truck halves, which snap together around a sculpted robot mode Optimus Prime. The truck is squat, and primarily blue, with outbursts of chalk gray paint and red flames. Pulling back and letting go activates the gimmick: Prime "drives" forward and bursts from the truck mode, "transformed" to robot mode. This gimmick has marginal success.
The Hasbro website explains it best: "The rogue DARK NINJA MASTER was exiled to a cave beneath Arashikage Mountain for betraying the ninja clans. After finding the Moon's Blood, a mystical stone of great power, he was able to channel the energy of dead ninjas, making him almost unstoppable. Seeking revenge, he has emerged from his subterranean prison to destroy all ninjas. Only two people can stop him: STORM SHADOW and SNAKE EYES. The two adversaries must join forces, for only by working together will they be strong enough to defeat this evil super-ninja."
What makes LEGO sets seem more expensive now is that the effective piece count seems lower. I remember that in the 80s, each set was full of bricks that were not overtly specialized only to that set. So they were useful for more things. Now the sets usually come with less bricks and plates (things that could be useful everywhere) and bring more things like minifigure accessories, flick fire missiles and other things that are not that useful. Although I think that everything was far worse in the late 1990s/Early 2000s than it is now.
Metalforce Prime was available in both a matte-paint "anime" version that more precisely echoed the colours of the actual series, and a metallic-paint version (pictured), which is less show-accurate but more shiny. The plain-colours version was the first release and has an Autobot symbol tampograph on his shoulder as per the cartoon, while the later metallic-finish version instead came with a decal sheet.
Optimus Prime's body was hauled out of the Arctic Ocean by the US military. While a terrorist organization run by the enigmatic Lazarus was able to seize control of several of the other Transformers that fell back to Earth, the military worked unsuccessfully to reactivate Prime. They eventually called in Spike Witwicky. Prime Directive #1 Spike was forced by the project chief, General Robert Hallo, to use his piece of the Matrix to reactivate Prime. Functional again, Prime used the Matrix to reactivate more of his fallen comrades. Prime Directive #2
Released as part of the first wave of the Energon Igniters Nitro Series, this Optimus Prime is a new Voyager-sized mold that converts from a robot based on his Age of Extinction body into a truck in 11 steps, and he features 5mm-compatible hands & articulation on his head, arms, and only his upper legs. He also features built-in Ion Cannons in this lower leg panels, activated in vehicle mode. He also comes with his own energon core, which is a different mold from his Power Plus toy.
LEGO is not a cheap toy and has never been. The brand has stood for nothing but the highest quality and hopefully any issues it has had with changes in manufacturing are only the result of temporary growing pains. Next time you are out buying a LEGO set for a loved one or for yourself, take a second to thank everyone who ever bought one for you as a gift.
While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth. With the Decepticons defeated, the Autobots entered into an even closer relationship with Earth. The Autobots also began the colonization of other worlds, the first of which was the planet Athenia, where Optimus Prime was stationed. It soon became apparent, however, that the consequences of releasing the energy of the Matrix to cure the Hate Plague were more far-reaching than Optimus had anticipated. Without the energy of the Matrix to act as a balancing factor, Vector Sigma had become destabilized. The Decepticons suddenly returned to exploit this, assaulting Cybertron in order to seize control of the mega-computer. Prime took a squad of troops to aid in the battle on the planet. When the arrival of the Autobot Headmasters tipped the battle in their favor, Prime broke off from the main attack and headed down into the depths of the planet, planning on stabilizing Vector Sigma at any cost.
Today, generally the creator sets only emphasize Lego as a building system. They come with pieces and instructions for two alternate models. Generally, Creator sets utilize a more basic color selection and look less “realistic” due to the emphasis on a versatile piece selection. Contrast that with current licensed themes and even Lego’s own proprietary themes. Themed/licensed sets are now trying to achieve more “realistic” models. As a result, piece and color selection skews toward more specialized pieces and colors again making the “critical mass” of pieces harder to achieve.
This mold was redecoed by Takara in 2000 as Car Robots Black Convoy. The following year, it was released by Hasbro as Black Convoy's 2001 Robots in Disguise franchise counterpart, Scourge, with retooled discs that lacked the Autobot insignia. Following this, the next use of the mold was planned to be Universe Toxitron, which ended up being canceled. The modified tooling was also used when Laser Prime was reissued by Takara in 2006 with a modified deco (see below), and for the e-Hobby exclusive Laser Ultra Magnus that accompanied the reissue's release. In 2015, Platinum Edition Year of the Goat Optimus Prime, another repaint version, comes with partially transparent plastic torso.
In the United States, Canada, and Hasbro's Asian markets, Masterpiece Movie Series Optimus Prime was exclusively available from Toys"R"Us, whereas in Spain, he saw a wider release, being at least available via the Spanish subsidiaries of Amazon and Carrefour. It's currently unknown if he was also available in stores, or limited to online purchases. In Greece, he was officially available via at least one toy store chain, aptly named simply "Toys-Shop", but again might have been available online only.
The styling is a little blocky, but these are toys aimed at a younger audience that actually wants to play with their Transformers. They don’t need 45 step transformations that result in perfect representations of what they see on screen. They want something that they can switch quickly between modes and that have added play potential, with power-up engines that unlock special features.
2. Piece diversity: Today the total range of piece types and the number of new piece types introduced every year has skyrocketed since the decade of the 80s. As a kid, the new pieces introduced every year were indeed one of the great answers to my parents’ pleas of “don’t you already have ENOUGH Legos?!?!” However, the quantity of new piece types again coupled with the broad color diversity again requires much more Lego to be purchased to attain that “critical mass”.
As battles between numerous different Primes and Megatrons erupted quite literally all across time and space, another member of the Convoy Aggregate was later seen battling Starscream, who had been empowered by Megatron to serve as leader of his Questors. This Prime was so surprised by Starscream's uncharacteristic sports car alternate mode that he left himself open for a blast from Starscream's Retroactive Nullifer cannon, which erased him from the timestream. As he faded out of existence, Prime responded to Starscream's taunts about the death of the Alternity by telling him that they were already well aware of their prophesied end and were well prepared. Foreshadows
In the 21st century reimagining of the original continuity by Dreamwave Productions, Optimus Prime started life as a data archivist known as Optronix, or Orion to his friends. After taking note of a battle where the Autobot leader Sentinel Prime had been killed by Megatron, he was summoned to the Council of Elders and informed that the Matrix had chosen him to be the next leader of the Autobots. He received the Matrix of Leadership shortly thereafter, and arranged for the Autobot evacuation of Cybertron. He intended to leave the Decepticons to their own devices, but a battle with Megatron beneath the planet's surface, accompanied by visions from the Matrix, stirred him on to fight for the safety of his homeworld.
The success of Beast Wars and the change in storyline resulted in its second phase: Beast Machines. Like Beast Wars, the name Transformers was used only as a secondary title. While still a success, the storyline and direction borne by Beast Machines was questioned and criticized by the most ardent fans who knew the previous history of the Transformers. Also, there was a clamor for a return to the original idea of the Transformers, that of their being protean robots with nearly humanlike artificial intelligences who transformed into vehicles or devices.
Henkei! Henkei! Transformers Convoy is a redeco of Classics Optimus Prime. He features a significantly altered colour scheme, generally to make the toy more closely resemble his appearance in the Generation One cartoon and the original toyline. His truck mode features less silver paint striping, but compensates by vacuum-metalizing the entire grill/fender area silver chrome. In robot mode all of his previously grey plastic has been replaced with red plastic and mostly painted silver (or in case of the grill & bumper, chromed), along with smaller decos. Since Henkei! toys do not feature a heat-sensitive rubsign, Henkei Convoy has two Autobot sigils tampographed onto his shoulders.
So as a MOC builder, I have found that I tend to design MOCs on LDD and acquire parts as needed for each MOC from bricklink. I now tend to pass on licensed themes. I am especially turned off by the rehashing of many of the Star Wars vehicles. Sets that I buy tend to be Creator sets for my kids or the occasional “special edition” set that appeals to me such as the Sopwith Camel set.
This Optimus Prime is a somewhat/nearly screen-accurate redeco of the Leader Class figure, but uses the original Leader mold instead of the Armor Knight retool unfortunately. In comparison to the first Age of Extinction Leader Class figure, his vacuum-metalized front truck bumper, sun visors, robot mode chest, smokestacks and side tanks chest was omitted, revealing the grey plastic underneath. His chromed chest was also stripped of chrome for adding paint operations, his shield was unpainted, and both of his sword and truck mode windows were casted in colorless plastic. He also features some extra silver paint on his robot mode forehead, and his white-colored Autobot insignia is slightly tampographed on the left. And lastly, his light-piping eyes is neutered by blue paint.
This redeco of the Dark of the Moon Voyager Class Optimus Prime figure features a really unusual deco pattern consisting of red transparent tires, the vehicle front grill and fuel tanks (the fenders remained opaque red due to unpaintable plastic). Some of his parts like the vehicle front hood and the truck roof features a pattern similar to the ones used for the Tech Specs in the Generation 1 toys. He features a new sword and shield accessory, which can be used to decode the patterns.
Prime soon had other things to worry about, as Magnus arrived on Earth with the intention of taking the Matrix, which he believed was rightfully his, at all costs. Prime, who refused to fight back, was seriously injured by Magnus. Magnus tracked Optimus to a desert island, where he pretended to offer him the hand of friendship, only to attempt to absorb the Matrix for himself. During the struggle, the brothers combined into the form of Omega Prime, also known as the God Fire Convoy. Through this link, Magnus was also able to channel the power of the Matrix, which he used to supercharge the Autobot Brothers into newly colored forms. Prime went on to battle the Decepticons on many other occasions. Although Magnus remained a free agent, refusing to take orders from his brother, over time, his animosity dwindled, and he frequently helped the Autobots by combining with Prime to battle the Predacons and Decepticons. During the final battle with Megatron's new form, Galvatron, the two brothers finally reconciled. Together, they faced Galvatron at the Earth's core and defeated him once and for all.
The DOTM packaging release of this 2-pack features an altered paint application on Optimus Prime's ion blaster/barrage cannon. On the original ROTF packaging release, the slide-out barrel on Prime's blaster is painted silver with a black paint spray app to simulate usage of the weapon, and the exposed inside wall of the gas tank at the top of the blaster is left as unpainted grey plastic (exactly like the blaster on the original single-boxed ROTF Buster Optimus Prime). After receiving numerous reports from customers that the silver paint on the slide-out barrel was easily scraped off by merely transforming it from gas tank to blaster, Takara-Tomy briefly stated in an interview that they had addressed the issue for the Dark of the Moon packaged version by swapping the placement of the silver paint application. Thus, the Dark of the Moon packaged version now features the slide-out barrel on Prime's blaster as unpainted grey plastic with an unchanged black paint spray app to simulate usage of the weapon, and the exposed inside wall of the gas tank at the top of the blaster is now painted silver.
Part of the first wave of TakaraTomy Go! toys, Hunter Optimus Prime is a redeco of the Voyager Class Beast Hunters Optimus Prime toy. His red and blue plastics are now cast in metallic shades, his translucent green plastic has been replaced with translucent blue, his yellow highlights are more orange-yellow, his yellow-painted side windows are now blue, and his gray plastic is now cast in two different, darker shades. The Matrix Saber, aside from being blue, uses a bluer shade of gunmetal paint for its hilt and handle.
Get ready to turn heads with TRANSFORMERS MIGHTY MUGGS Figures. Call it a moodswing, or call it a moodSPIN, these TRANSFORMERS MIGHTY MUGGS figures feature a push-and-turn mechanism that lets fans change the figure’s facial expression by pushing down on the head. With 3 different expressions and classic character designs, these figures will have fans doing a triple take. Characters include BUMBLEBEE, OPTIMUS PRIME, MEGATRON and more. Each sold separately. Available at most major retailers and on HasbroToyShop.com.
TakaraTomy released another reissue based on the Encore version as part of their Chronicle line in 2011, lacking the original Generation 1 trailer. Instead, the Chronicle version was available in a two-pack with Dark of the Moon Deluxe Class Optimus Prime and a new trailer that could be used by both Optimuses, thanks to a retooled trailer hitch on the Generation 1 Optimus Prime figure.
Bumblebee, being the popular character he is, was one of the first five characters inducted into the Hall in 2010, during a ceremony at BotCon; the convention for all things Transformers. He was joined, not surprisingly, by other super-popular transformers: Optimus Prime, Megatron, Starscream, and the Dinobots. Humans enshrined in the Transformers Hall of Fame over the last few years include everyone from director Michael Bay to Peter Cullen (the iconic voice of Optimus).
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is an extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation 1 and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
Rodimus appeared in the text-based fiction Dungeons & Dinobots as one of the Autobots who attacked the Arch-Ayr fuel dump. Sent to capture rogue Dinobots for the Autobots, he was part of the group that captured Swoop. Together with Blurr, he then tracked Grimlock, but ran into competition with the Decepticon allies Sideswipe and Cliffjumper. After Grimlock bit off his left hand Ratchet replaced it with a circular saw (a reference to one of the original Rodimus' melee weapons in The Transformers: The Movie).
This is a redeco of the 2004 20th Anniversary Optimus Prime, released to coincide with the 20th Anniversary of the original Transformers animated movie and DVD release. He is painted in flatter, non-metallic colours to more closely resemble the original cartoon model, as well as the Voyager-class Classics Optimus Prime figure. The color of the light of his feet has changed too. As a cost-cutting measure, all vacuum-metalized plastic has been replaced with with silver and gold paint. Confusingly, his Ion blaster is now cast in blue plastic.
Prime's cab and trailer can also combine to form a super robot mode. Transforming the cab into the torso portion sends the transformation command to the trailer, which raises itself up off the ground to become a pair of immobile, statuesque legs (as long as you're not playing with it on carpet), and when the pair are connected, the super-robot head pops up with a metallic shriek sound effect. Pressing the Autobot symbol on the figure's chest activates a pulsing laser sound effect, and the small grey button on his right shoulder illuminates his fist with a red LED, which can illuminate either of his guns, as well as the Star Saber sword (the Star Saber was specifically cast in clear plastic for this purpose, but in practice, the light failed to carry even halfway up the blade).
The first Generation 2 Optimus Prime toy was largely identical in sculpt to the original Generation 1 figure release. While his cab robot retained his original red and blue color scheme, his trailer was recast in black, with the original blue and silver striped sticker replaced with a red and silver one displaying Optimus's name. On the first release of the trailer, the internal components and Roller matched the blue of the cab robot. Later, the internal components were changed to a lighter blue, as was Roller. Another running change followed, making the dark blue of the cab robot match this lighter shade. A bright yellow "Autobot" tampograph was also added to the back of his right leg.
Prime's homecoming was not all he had hoped for, for Shockwave had taken control of the planet. Prime and the other transformers were forced to go underground, waging a guerrilla war against the Decepticons. Around this time, Cobra would attempt to steal Teletran-3, but their attempt to teleport directly into the chamber would set off a catastrophic malfunction, one that threatened to crack open time itself. Optimus Prime and the Stunticons were amongst those who found themselves sent back in time. Optimus was reformatted into a 1920s semi-truck and was eventually rescued by Roadblock, Beach Head and the Baroness, who helped him capture the Stunticons.
A Mega Super Collection Figure of Prime in his "normal mode" was released a few months after the first figure. He came with a translucent blue Star Saber, and a much larger version of the Convoy Gun accessory, creating a sense of comparative scale, even though he's the same height as the Super Mode figure. Like the Super Mode figure, only his right fist has a peg-hole in it, so he can't hold both weapons at once.
Stewing in a cell, Optimus blamed himself for their predicament, but he and the Autobots were soon rescued by Broadside and Sandstorm. Sandstorm and Optimus traveled through Cybertron's Old Slave Trails, only to find themselves ambushed by Runabout, who swiftly killed Sandstorm, and then the Decepticon was attacked by a Sharkticon, which lunged at Prime. Cold War Prime recovered to find himself in the care of a group of Autobot rebels including Hot Rod, Blurr and Kup. Though Optimus lashed out at Gnaw upon awakening, the other rebels quickly cleared up the misunderstanding, assuring Prime that the Sharkticon was their ally. They revealed to Optimus that Shockwave had been transmitting subliminal signals to increase Transformer aggression, readying them for war against an unseen foe. At this point, another rebel cell joined up with them with dire news: Shockwave had unleashed the Omega Sentinels on Iacon! Passive Aggression
With the failure of the Generation 2 series, Hasbro and Takara decided the franchise needed an overhaul. They went in a new direction and a new beginning. While there had been Transformers that change into robotic animals, the premise of the new line was that all figures would transform into animals with realistic appearances. The Beast Wars toy line was launched in the autumn of 1995, and Mainframe Entertainment produced a computer-generated imagery, or CGI, animated series program to tie in with the new toy line. A fresh idea coupled with a TV series program with strong stories assured this series the success Hasbro and Takara needed, as this series was a giant hit in international markets as well as in Takara's home market, Japan.
the one the left was a design that i hated from the start. just doesnt look like what a Transformer is supposed be. the one on the right is almost there but not quite. a very welcoming design though. its what Prime should have looked like from the start. To say it is too 80s, well the first film should have taken place in the 80s, not present day. The Transformers are icons of the 80s. You make Cybertron in the future tense all futuristic and alien-ish and whatnot, but on earth you make it in the 80s.
Part of the first wave of Prime: Robots in Disguise Weaponizer Class toys, Optimus Prime is a large toy, similar in size to Leader Class figures from previous Transformers toylines. He features a simpler transformation and design compared to previous Leader-sized figures, with him having fake chest windows (again) and a simplified, hollow truck rear where his feet, arms, and fake chest windows are plainly visible. He comes with a blaster which can mount onto his hands, shoulder-pads, and the sides of his legs/truck rear.
The Monster XL also features not one, but TWO barrels with 6 different nozzles per barrel. That adds up to about 36 different ways to put out your best friend's eye. The ludicrous weight and the fact that it takes 43 fucking pumps to get the water up to pressure offer up reasonable disadvantages, but since water gun fights are always half water gun fight and half "who brought the biggest dick" competition, none of that really matters.
The 1984 and 1985 toy lines contained several figures of note. Megatron, the Decepticon leader, originally transformed into a realistic Walther P38 pistol with stock and barrel extensions and scope. The Megatron toy was delayed till 1985 for release in the UK. The Constructicons were the first "gestalt" team in the Transformers line, but were different from most subsequent gestalt teams in that they consisted of six members instead of five. The Autobot Jetfire was repainted from a Macross toy, specifically the VF-1 Valkyrie, and the character was renamed Skyfire in the animated television series program for copyright reasons.
In a completely different scenario, Optimus agreed to Prowl’s plan to go on the offensive and try and discover the full extent of the Decepticons’ plans. Optimus nominated Prowl, Bumblebee and Mirage to go along with him on the mission. The group refuelled with the gas that Sparkplug brought back from the Autobots’ secret storage area, and took off. The group soon happened upon the Decepticons’ lab in the middle of a barren, polluted wasteland.
Part of TakaraTomy's Movie Advanced Series lineup, Revenge Optimus Prime is redeco of the 2010 Transformers Battle Blades mold, featuring darker plastic, a pair of flip-out swords (the first release of this mold) from the Hasbro release, and chromed fuel tank-guns & sun visors. His shins & wheel joints are bronze from the Hasbro release as opposed to the grey of Takara's Autobot Alliance release.
The earliest releases of Energon Optimus Prime have no ridges on the inside of the chest windows and a different head sculpt featuring an Optimus Primal-style mouth-slit in Prime's mouthplate. This was soon replaced with a full mouthplate, and it was this version of the toy which appeared in the Energon cartoon and was released by Takara. Other changes made to Takara's version of the toy involved a chromed front grill, more vibrant plastic colors on Digger-3 and Submarine-4, a darker blue plastic on Prime himself, and more intricate paint operations. Takara's release lacks the electronic sound effects seen in Hasbro's version, which were commonly gutted for the Japanese releases of any Autobot toys who had them, though Prime retains his light-up chest.
On another beautiful day, Optimus sat under a tree with Bumblebee and Hound, discussing the Decepticons. A while later, Beachcomber reported that Grapple had shot at him. Optimus smelled a Decepticon plot and led an assault on their headquarters, only to find that Grapple had been injected with a cerebro-shell, placing him in Decepticon control. Battle commenced, during which Grapple was freed and helped them defeat the Decepticon. Afterward Optimus said it all had been worth it to get Grapple back. Insecticon Attack!
For some reason: unlike the stock photos (pictured from the right), This Custom Kreon had a slight QC issue to the opaque and transparent helmets: One had two sides sculpted, while the other one has the small flat square sculpt (similar to the details on Hound's helmet) on the right side. Several samples had two different "variants": One with the perfect transparent helmet & a differently-sculpted opaque helmet, while the other one has the opposite. However: later releases fixes the problem by a running change.
The original Optimus Prime toy, as well as the Diaclone Battle Convoy toy that it was based based upon, transforms into a late 1970s red Freightliner FL86 Cab-over-Engine triple-axle semi trailer truck. The truck mode features rubber tires, and the cab is partially constructed of die cast metal. The windscreen section can open to reveal ultimately-unused seats that were originally designed for Diaclone's driver figures.
A redeco of Deluxe Earth Mode Optimus Prime with the jet pack attachments and a smaller version of Ultra Magnus' Mass Hammer, as seen in the "Endgame" series finale. The Wingblade attachments are also compatible with Voyager Optimus Prime. The figure never saw a release in the U.S. market due to Hasbro's decision to cancel the toy line, but a variation of it was made available in Japan.
Four million years ago, Cybertron, shaken from its orbit and drifting through space, became threatened when it floated into the path of an asteroid field. Prime led a group of elite Autobot warriors on the Ark, the Autobot starship, on a mission to destroy the asteroids. Although the mission was successful, during the aftermath of this mission, the Ark was attacked by Decepticons hoping to overpower their weakened foes. Intent on keeping the secrets of the Ark from the Decepticons, Prime set the craft on a suicide course, crashing it into the then prehistoric planet Earth.
In 1989, the entire line became limited to Pretenders and Micromasters. For the first time, the Transformers received a new design for their title logo. But many also regarded this as a time of a dearth in creativity and the lowest point in the toyline's history. The year 1990 saw the last American burst with the release of more Micromaster characters and the introduction of the Action Masters, non-transforming action figures who came with Transforming companions. Larger Action Master sets came with transforming vehicles and bases. The Action Master line was criticized for its perceived desperation for a gimmick, although it had a few defenders. The line predictably faded and would be the last Transformers output in the US until 1992.
In the final episode of Transformers: Cybertron, Optimus Prime proposed a new Space Bridge project using the power of the four Cyber Planet Keys and the four great Cybertronian ships. Many Autobots and former Decepticons joined in the project. Jetfire was left in charge of Cybertron as Optimus Prime led the Atlantis with the Earth Cyber Planet Key, joined by Red Alert, Safeguard, Scattorshot, Leobreaker, Menasor, and Heavy Load.
This toy, as well as "Shake Bulkhead", was a bit of a chore to obtain. First you had to buy a Happy Meal on July 30th or 31st, which netted you a Dark of the Moon Optimus Prime or Bumblebee toy and a "weekend exclusive Special DVD and MechTech Sheet with red ticket". Said ticket was then traded in at participating toy stores when buying any Dark of the Moon toy to get one of the two charms. (Completing the set with "Potato Bumblebee" was considerably easier, at least.)
From this chart, you can see that there has been no real trend in the price per piece in these particular sets. The weighted average (larger sets weigh heavier than smaller sets) for the price is 13.19 cents per piece. The size of the ships did seem to increase in the last couple years; however, 3 data points does not make a trend (I will visit this idea later). For those of you who had a pirate ship growing up (I was lucky enough to get the Skull’s Eye Schooner), you may not have realized it, but it wasn’t cheap. And, the prices in this chart do not take inflation into account.
Timelines Rodimus is a BotCon 2008 exclusive recolor of Classic Rodimus in black that is based on Black Rodimus. An evil alternate version of the Generation 1 character, according to the comic writers his personality is based on Vinnie Barbarino from the TV series Welcome Back, Kotter, using variants of Vinnie's famous put-downs. His new appearance has inspiration from the facial hair of parallel universe Mister Spock from the Star Trek episode "Mirror, Mirror".
Nearly all the chrome is worn off, the tips of both smokestacks are broken, the fists and guns and voice box are long gone, there's a huge chip of plastic broken off one of the shoulders. I still have the trailer, but it's also broken in a few places. The door is gone. The spring-loaded gimmick doesn't work anymore. The repair drone broke off entirely near one of the joints on the main arm and was thrown away many years ago.
Hot on the heels of their licensing deals with Pepsi and Nike, TakaraTomy got themselves a slice of Apple™ pie and released Convoy —playing iPod speaker— as part of their small, musically-themed Music Label line. This version of Prime is an all-white redeco of the original Generation 1 cab robot, which (much like the "Marine Version" of Prime from the Sports Label line) makes it seem like he ought to be Ultra Magnus. The figure is actually even derived from the retool of the mold created for the original Ultra Magnus figure, as distinguished by the elongated hubcap pegs on the front wheels. Like Pepsi Prime before it, the figure's fists now store in peg holes on the under side of its trailer. The toy lacks any of the original Prime's stickers (even the silver stripe on his chest is now a paint operation) and includes the original thick-barrelled version of Prime's blaster. The toy features a brand new headsculpt based on the 20th Anniversary Prime figure, given additional poseability not previously seen on the figure by being mounted on a ball joint.
This occurs in a Japanese toy line, animated series, and mobile video game called Q-Transformers. Specifically, the video game is called Q-Transformers: Mystery of Convoy Returns. Both Bumblebee and Optimus Prime are able to switch between their Generation 1 and movie modes in the series and game-- specifically Q-Transformers: Mystery of Convoy Returns. Strangely, though, when he’s in Generation 1 mode, he’s not a Volkswagen but another small, quirky car: a Daihatsu Copen. The show is pretty meta, with the characters being aware that they’re toys and they even talk about the Mystery of Convoy video game that they’re in.
Hero Optimus Prime was the first new-mold Optimus Prime toy created for the Generation 2 line. He transforms into a Kenworth truck of unknown model which defies Optimus convention by being one continuous unit, rather than the traditional cab-and-trailer combo. Decals form the windows of a faux truck face to represent his chest, featuring both his name and what appears to be a life support readout coming alive towards the end. In addition to a small gun, he is armed with a large missile launcher, which can fire a rubber-tipped rocket by means of a bellows which you slam your fist down on to produce a puff of air. The launcher is accessible in both modes, ending up mounted on his right forearm in robot mode; the bellows is attached via a rubber hose and cannot be disconnected, but stores on the figures's back when not in use, as do the rockets. A similar air-launching system with identical missiles was used by the simultaneously-released Hero Megatron, and by Laser Optimus Prime the following year (see below).