It should be noted that in the lead up to the premiere of the Japanese translation of this series, TakaraTomy marketing director Masahiko Yamazaki indicated changes would be made to place it as a prequel to the 2007 Transformers live-action film. This would have made this version of Optimus Prime an earlier version of the film character. In practice however, the only changes that were made consisted of trimming for time to allow additional promotional material to be added to the start and end, and the name change of Bulkhead into "Ironhide" (with Ironhide becoming "Armorhide"). The future 22nd century Detroit setting and characterizations of the cast remain as they were in the original production.
Forming a roughly 11-inch figure when fully assembled, Diablock Convoy is highly articulated, save for his head, which is only able to move up and down. Said head is also by far the most stylised aspect of the figure, with no real attempt to approximate Prime's face or mouthplate, instead featuring only a reversed block that gives the odd impression of a cycloptic eye. It is possibly intended to actually represent his forehead grill, as a yellow block inside his head construction remains barely-visible through a slit in his face, possibly intended to represent the classic toy's yellow eyes.
Optimus Prime has a wide range of articulation for a relatively bulky figure. He has ratcheting joints in his shoulders, elbows, hips and knees, with swivel joints and ball joints supporting them in his biceps, lower knee joints and ankles. Again, unusually for a mainline figure, especially at the Leader pricepoint, his hands have individually articulated fingers and thumbs, but no wrists.
Similar to the Activators toyline, One-Step Changer Optimus Prime features a spring-loaded transformation. He features swivel articulation in the head and both arms. He shares a similar (not identical) transformation with his fellow One-Step changer, Hound. Also, due to his transformation scheme, his shoulders can be pushed forward (the arms is pushed on the same time), which also allows him to wield a close ranged weapons with longer handles with both hands.
This Optimus Prime is a somewhat/nearly screen-accurate redeco of the Leader Class figure, but uses the original Leader mold instead of the Armor Knight retool unfortunately. In comparison to the first Age of Extinction Leader Class figure, his vacuum-metalized front truck bumper, sun visors, robot mode chest, smokestacks and side tanks chest was omitted, revealing the grey plastic underneath. His chromed chest was also stripped of chrome for adding paint operations, his shield was unpainted, and both of his sword and truck mode windows were casted in colorless plastic. He also features some extra silver paint on his robot mode forehead, and his white-colored Autobot insignia is slightly tampographed on the left. And lastly, his light-piping eyes is neutered by blue paint.

As the Binaltech saga unfolds, the multiverse is threatened with destruction, until the original continuity is restored and the Binaltech universe is split into and preserved within its own separate universe. Overdrive confirms that the threat is over by visiting the dimension occupied by the original timeline, and reveals that in that world, Hot Rod had received the Matrix and taken over leadership of the Autobots as Rodimus Prime.


Prime was perpetually at the forefront of the action throughout the early years of the war on Earth, usually confronting Megatron, though in some rare instances, such as against the Insecticon-controlled Decepticons or the Combaticons, teaming up with him for the greater good. He has suffered his fair share of battlefield scrapes, almost meeting his end when his vital cosmotron component was critically damaged by the Decepticon jets and when Laserbeak had his body disassembled and turned into Decepticon trophies, such as a pet "alligaticon" and a defense laser.
Interesting work but I would like to know whether you would find the amount of new sets offered in toto has changed over the survey period. Is there an economy of scale at work? This seems to have two implications: first, the number of units for a particular set may have increased thereby affecting the price of all sets belonging to that class (but doubtful you could find exactly how many Death Star sets were produced in relation to, say, hogwarts castles); second, the popularity of certain set classes may affect what kinds of sets are available. Like with language, we are all confined to use the words we know. And so with Lego, set designers are confined to use what’s economical, unless, of course, the design calls for new styled pieces. These relations are difficult to grasp in statistical analyses, but would seem to play a role in price steering.
Through the years, there have been many action figures made in the likeness of the original incarnation of Optimus Prime, some of which have been featured in fiction, others of which have not. Additionally, some toy makers have made unlicensed toys in his image or accessories for the existing toys. The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[23] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the Transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original Transformers toy line.

I mean you could argue that they are returning to the way the original Transformer toys worked. Here is an example of the OG Optimus toy. I went to Hasbro's website to see what the most current version of Optimus is that they are selling and I found this. That actually looks surprisingly similar, though I would argue they have gone more of the direction of making the robot look more robotic and the truck a little less truck like but its still a solid middle ground.
There is also a smaller "Legends of Cybertron" Micro sized version of this Optimus Prime, without a trailer, and a Burger King Kid's Meal toy, again without a trailer. There is also a rotating sucker holder version of Cybertron Optimus Prime. Later releases of the Leader class and Micro class Optimus Prime were repainted in darker colors, supposedly representing Optimus Prime after the television story. This toy is called Galaxy Force Optimus Prime. A special metallic painted version of this toy was included with Megalo COnvoy in Japan.
The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.[6][7]
In one reality, while the Autobots were boarding the Ark, Optimus voiced his lack of confidence in his leadership, before welcoming aboard Geosensus, who was incapable of transforming to robot mode. Four million years later, Prime and Prowl found the Ark was under attack and defended it with deadly force. In examining the wreckage of the attackers, they realised that the robot Optimus had destroyed was not a Decepticon but Geosensus, who had forced himself to transform in an attempt to fight off the Decepticons. Though Prime was willing to take the rap, Prowl insisted on covering up the mistake to protect Optimus's image as a leader. Parts
Optimus Prime was originally known as Orion Pax, a police captain from Rodion. An encounter with a pre-Decepticon Megatron would change the course of his life, teaching him that freedom was not just the right of all "civilised" beings, but of all sentient beings, and causing him to publicly reclaim the name "Autobot", previously used only at Cybertronians as a derogatory term, before the corrupt Senate.
This straight reissue of the original Optimus Prime figure was released in Hasbro's European markets in the early 1990s, at the same time as many other Generation 1 figures were being re-released as "Classics". Oddly, although he shares their golden packaging, Prime is not actually identified as a "Classics" figure anywhere on his box, but is generally considered to be part of the sub-line for simplicity's sake.
Sure enough, in 2009, when the Hytherion's colossal claw-marks appeared on planets throughout the solar system, Prime's other-dimensional incarnation returned, bringing with him a "Vibrant Red" Vector 109 auto-avatar with which Prime fused. In that instant, he was reborn as part of the Alternity, a manifold being who encompassed all the different incarnations of Optimus Prime through the multiverse at once. Prime reached his hands heavenward and peeled back the layers of reality, exposing the gargantuan fanged maw of the Hytherion looming above the Autobots. From Here to Alternity

Besides finding Megatron for the Transformers Movieverse, Mr. Sheppard was known for his many appearances across the Star Trek series and films. Additionally, he was well-known for his work as Blank Reg in the Babylon 5 series, and many other appearances in series like Dr. Who and more over his long-time career. You can read the full article about him via TV Guide.com.
This set's Optimusses are based on the Prime incarnation. The larger Optimus is a smaller, simpler build than the first big kit, and makes use of ball-and-socket parts for increased articulation. It also carries a spring-loaded missile launcher. The Optimus Kreon's tampographs are based directly on the Prime cartoon model, though he carries an energon axe akin to the one from the War for Cybertron games. He also has a clear-blue extra "energon" torso piece.
This gold-chrome and clear-plastic redeco of the Leader-class Optimus Prime figure was first offered as a prize in a mail-in contest held through TV Magazine alongside a silver chrome version of the same toy (see below). Both figures were later made available again as prizes in a second contest in the September 2005 issue of TV Magazine, together with "Galaxy Convoy Custom Color Version" (again, see below).
A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.

Released exclusively in Asia, Shadow Spark Optimus Prime is a redeco of the Age of Extinction Leader Class Optimus Prime, featuring dark grey plastics, weathered deco patterns, and some opaque plastic which was recasted from transparent plastics. He features a scratched Autobot insignia on the right side of his sleeper-cab, and a Cyberglyphic on the left side of the front hood. Some weathered parts does not match well with some other parts (the fenders, for example).

Late in 2008, this version of Optimus prime was one of four Classics figures repainted into HasbroToyShop.com exclusives (the other three being the Megatron from this set in G1 colors, Grimlock repainted into Overkill, and Mirage repainted into Dragstrip). Unlike those three, it's debatable just how much repainting went into Optimus, but he comes in a snazzy new box.
Produced as an action figure by the Japanese company Kaiyodo, the main selling point of the line is the 'Revolver' joint. This gives the figure a high degree of articulation, allowing for many dynamic and varied poses. Hot Rodimus is number 047 in the Yamaguchi series, and comes with extra sets of hands, a pair of pistols, an extra head (which is molded with his binocular vision, as seen in The Transformers: The Movie) and a display stand.

In the series released by Marvel Comics, before the Great War broke out on Cybertron, the robot who would be Optimus Prime, before he received the Matrix of Leadership from Sentinel Prime, was a Transformer of note, displaying his skills in the Infraformers Sharpshooting Competition. When the war began, Prime quickly made a name for himself as a combat leader of the Autobots.
Optimus Prime is one of the playable Autobot characters in the 2010 video game Transformers: War for Cybertron. In the Autobot campaign, he starts off as Optimus, a warrior who rallies his fellow autobots against the Decepticons following the reported death of their leader Zeta Prime. He succeeds in defending the Autobots' home city of Iacon from Starscream and his forces. Optimus then receives a distress call from Zeta Prime. Knowing that this is most likely a trap set by Megatron, he proceeds anyway with a rescue mission. He lets himself, Bumblebee, and SideSwipe be captured by the Decepticons and is sent to a prison in Kaon, the decepticon capital, in an elaborate scheme to free Zeta Prime and all imprisoned Autobots. He frees all the other prisoners, and defeats Soundwave and his minions Frenzy, Rumble, and Laserbeak, but he is too late to save Zeta Prime. After taking Zeta Prime's body back to the Autobot high council, he is bestowed upon the well earned title of Prime.
This Optimus Prime is a non-transforming truck that is loaded with a number of gimmicks: Pressing the back button activates his Weaponizer-sque (or Stealth Force-sque) battle mode on his truck form, with the lights being emitted in the same time. He features both spring-loaded (truck front) and pressure-firing (both sides of the launcher) discs, with a flat character art of Slipstream & Sawback being sculpted on it. Optimus Also comes with additional Slipstream and Sawback figurines, which they can be (uselessly) attached on Optimus Prime's truck top & both sides of the launchers.
As the Binaltech saga unfolds, the multiverse is threatened with destruction, until the original continuity is restored and the Binaltech universe is split into and preserved within its own separate universe. Overdrive confirms that the threat is over by visiting the dimension occupied by the original timeline, and reveals that in that world, Hot Rod had received the Matrix and taken over leadership of the Autobots as Rodimus Prime.

Long before the internet came along and ruined life as we knew it, Children amused themselves with the most primitive of toys. At the top of the food chain was the yo-yo. Believed to date back to around 500 B.C. in Greece, and even believed to have been used as a crude weapon in the Philippines, the yo-yo (pronounced yo-yo) made a roaring comeback in the 1920s as a toy, and to a lesser extent as a weapon.

As one of the first Transform Jr toys, this version of Optimus Prime was released under the early name for the series, Transform Gōkin. As a smaller, simplified version of the original Generation 1 Prime figure intended as a low-cost alternative for younger children, Prime features a similar transformation, with a removable head in addition to fists, but lacks rubber tires and translucent windows. As with most other Transform Jr figures, he lacked any of his major accessories, coming only with his rifle and a cardboard replacement for his trailer that had to be assembled by the buyer.

An all-new Leader class figure of Optimus Prime, featuring a robot design and transformation that is closer to its film counterpart than the 2007 toy version. Features retractable blades on both forearms. New "MechAlive" feature consists of visible moving gears in the chest behind the cab windows. At the push of a button on the back of the cab, the truck mode emits an engine idling sound. The transformation sound is played when the upper torso and lower torso are connected. A recording of Peter Cullen saying, "I am Optimus Prime!" is played when his chest is pushed upward via a lever on his waist.[97]

Optimus Primal, leader of the Maximal faction in the Beast Wars animated series and toy line, is not Optimus Prime. Primal is one of the Maximal descendants of the Autobots, who took the name to honor Optimus Prime. The same applies to the Megatron of this era. Before the animated series began, Hasbro envisioned Prime and Megatron as their beast counterparts, but once the animated series began, this had already been changed. Design elements, such as Prime's mouth-plate slitted to add an actual mouth for the animated series and the first mini-comic that came packaged with the toys, suggest this. Nonetheless, Optimus Prime and Megatron were a major reason the Beast Wars began, as Megatron's Predacon namesake traveled back in time seeking to alter history and insure that the Decepticons triumphed over the Autobots.
Optimus & Shreddicus were initially exclusive to San Diego Comic-Con 2017, where they sold out. A small portion of the run had been held for future sales: Hasbro Toy Shop put the set up for sale for about five minutes on August 14 before selling out. The remainder was available at HasCon 2017's exclusives booth, but again they burned through the stock very quickly.
A perfect example of why I dislike modern Transformers more and more. I'm 22, and when I was younger Transformers were my favorite thing. I still have many of the ones I had back then. But nowadays I'll go to Target or Toys R Us (RIP) and see what Hasbro has been up to, and they're bragging about how this Transformer only takes 5 steps to transform!
Another thing different now from when I was a kid (70s/80s) is that the sets contain much fewer basic bricks. It seems the models are made out of all these exotic specialized pieces which are less useful for general building. Is this a business strategy to sell more sets by reducing the reusability, a marketing ploy to sell more pieces by making every set include unique collectable parts, or just trying to make the models look more realistic/slick? I think Lego was more fun when the majority of bricks were basic.
When Sideswipe was accused and convicted of destroying the Nova Suspension Bridge, Optimus was infuriated that one of his own Autobots could commit such a heinous act. Optimus was tasked to hunt down and deactivate Sideswipe, though the task proved to be easy as Sideswipe did not run, hide or resist. After Optimus had deactivated Sideswipe, he was approached by Prowl, who pointed out that Sideswipe's actions made little sense, as he had committed the crime in broad daylight before many witnesses. Agreeing that the Decepticons might be behind the situation, Optimus allowed Prowl to take a team of Autobots to Carob Island to clear Sideswipe's name while Optimus and Jazz stayed behind to continue working on human/Autobot relations. Prowl returned with evidence that it was indeed a Decepticon-controlled clone of Sideswipe that had committed the crime. Optimus then presumably reactivated Sideswipe when his name was cleared. Deadly Paradise
×