When a new threat, the Elder Gods, appeared, a group of Autobots acquired the help of Tobias Muldoon and Nikola Tesla to travel to the glacier and waken Prime. Infestation 2: The Transformers #1 Tesla's Tesla tower wasn't enough on its own, so Wheeljack, Ratchet, Trailblazer, and Hound gave energy necessary to recharge Optimus Prime. Optimus awoke and revived the other Autobots with his energon reserves, before traveling to Port Cenotaph, Nova Scotia where an Elder God had risen from the sea. Diving into the ocean, Optimus cleaved parts off the Elder God until it and its followers returned to the depths. Though Tobias asked if the creature was dead, Optimus wasn't sure, but promised the Autobots would be there to defend Earth if it ever returned. Infestation 2: The Transformers #2 Infestation 2 #1

This minor redeco of the Optimus Prime Launcher features grey wheels, blue optics, and added red paint on its upper arms, while the launcher has grey plastic in place of black, smaller Autobot symbols on its sides, and gold paint on its interior instead of silver. The stock photography on the packaging depicts Optimus with a blue stripe on his built-in "trailer", which was omitted in the final product.

Transformers: Energon introduced several new concepts to the toy line. Two new sub-groups, the Omnicons and Terrorcons, joined the fray, representing smaller factions of the Autobots and Decepticons respectively. The smaller toys in these sub-groups came with Energon weapons that could be used by the larger Autobots and Decepticons, along with Energon chips that could be fastened to the larger figures to enhance their power. Energon weapons and chips came in a variety of colors of translucent plastic. Many Autobot figures in the line were able to combine with a partner to form a larger robot through the "Powerlinx" process. The Decepticons were designed instead with alternative "attack modes". While no longer the focus of the line, there were several Mini-Con releases in Energon as well.


This figure was designed by Yūki Ōshima and produced by KT Figure Collection. The figure is actually a mini bust of Optimus Prime, which includes the head and the upper body without arms. The chest design comes with translucent blue windows and a grill on the midsection. There is also a button in the back. Pushing the button will open the chest and cause the Matrix to emerge, similar to the scene in The Transformers: The Movie.

The stickers may not be cut right, my copy has them off-center, they're probably using an 80's type bladed stamp with little QC to rush them out. The cab will not have the stripes applied, those are included on a strip of mylar/foil/whatever silver but you have to measure and cut them to fit. Every KO can be identified easily by these missing stickers in the box. Older releases also had the trailer's stickers separate but those have not been made in some time.
This gold vacuum metallized (save for his black joints, which they were made out of unpaintable plastic) Protoform Optimus Prime figure was featured as a Lucky Draw giveaway (along side similarly gold vac-metal versions of Voyager class Optimus Prime and Protoform Starscream) in the December 2007 issue of TV Magazine. Released in 2008, only 5 pieces were made, making it one of the rarest Lucky Draw figures; the images at right represent the only known photographs of it.
Optimus Prime also appears in Transformers: Rescue Bots, stated to take place in the same universe as Prime, as the leader of the Autobots who transforms into a semi-trailer truck, though unlike his Prime appearance, it's flatnosed like his G1 counterpart. He gave the Rescue Bots their mission and mainly appears mainly via view-screen, appearing physically in the first episode and then in the first-season finale, where his truck mode is seen for the first time on screen. He then returns, with or without Bumblebee, many times throughout the second and third seasons as a recurring character. In the episode "Land Before Prime," Optimus Prime arrives on Wayward Island to help the Rescue Bots. He scans Trex as a secondary form where gains a Tyrannosaurus form, making him a Triple Changer, though he states that scanning anything techno-organic might have unpredictable results. While he loses control of this "Primal Mode" at first, the Rescue Bots determine that his loss of control is due to low Energon reserves, and are able to replenish his energies and restore him to normal using an energon patch. At the conclusion of the third season, Optimus helps his old friend, High Tide, along with the new recruits, Blurr and Salvage, save Griffin Rock and subsequently sends Heatwave and his team on a new mission to use the island as "testing place" to reveal their true identities as aliens.
This increase in average piece count could be a factor in why LEGO is perceived to be more expensive now than in the past. LEGO sets have become larger and more complex. They have started to market directly to an older crowd with sets such as the Modular Buildings and the Architecture series. These new sets have rekindled interest in LEGO for an older generation but at the same time, it has introduced this same generation to the relatively high price of LEGO sets.

Part of the first wave of Bot Shots Series 2 five-packs, this redeco of the original Optimus Prime toy is cast in translucent blue plastic, with his cab painted white. Despite possessing translucent plastic and more lopsided stats than a regular Bot Shot, he is apparently not labeled as a Super Bot. This version of Optimus comes with similarly-themed with new redecos of Bumblebee, Mirage, Ironhide, and Jetfire.
We're sure we're not telling you anything you don't already know when we say that Hot Wheels are miniature die-cast cars with dynamic multi axular momentum technology (ie, they roll). They are usually based on real-life production cars but sometimes are modeled after bad acid trips, with wheels added later (for the rolling). Shortly after the introduction of the cars, Mattel launched various tracks to take full advantage of the cars' rollability.

The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
The TakaraTomy version of Premium Series Optimus Prime has a considerably different deco to Hasbro's release. Similar to the unique chrome Optimus Prime, Optimus Prime Battle Mode features vacuum-metallized parts for nearly all of the silver truck parts, for a greater resemblance to the polished chrome on the real prop trucks. Unfortunately, as his feet are the front fenders and grill, this will likely lead to chipping. In robot mode he retains several decos that were removed from Hasbro's Premium Optimus Prime for cost reasons, such as the blue and gold decos on his thighs. Finally, the flip-out energy sword is coloured gold to reflect its "powered up" appearance.

A Leader class toy that transforms from fire truck to robot. The front end of the fire truck can form a robot resembling Generation 1 Prime, while the rear section can form a battle station or combine with him to form Super Fire Convoy. The rear section has an extending ladder with retractable water cannons and missile launchers. This battery-operated toy features siren sounds and voice samples of Fire Convoy (saying the lines, "Fire!" and "Kyoudai Gattai! Super Fire Convoy!").[41] Fire Convoy can combine with God Magnus (sold separately) to form God Fire Convoy.[42] This toy was designed by Takara's Hisashi Yuki.[43]
Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.
Unlike the stock photography, the actual toy doesn't feature a mouthplate. In October, : The two-pack was one of the three Evolution 2-packs available as a Toys"R"Us exclusive in Japan, with no changes on the figures with an exception of the packaging, which the front box features Japanese translated versions of the English text, and a sticker on the back confirming that this was a Japanese release. The robot mode stock photo lacks the gun nozzle/missile.
It uses the 1985 post-rub mold, no metal plates, and the trailer's launcher fires short(this can be modded with some disassembly, Toy Polloi has a video showing how). The wheels roll a bit iffy, this is a common documented issue. Personally I believe there is a slight molding error in the robot, the legs do not seem to fold down quite as far as an official cab's legs do, causing a very slight lean backwards.

Like the previous Prime, it is loaded with features, though it ditches the first movie's Automorphing for the new Mech Alive gimmick. When a grey tab on his midriff is pressed, Prime's entire pectoral region "flexes", lights in his chest and eyes glow, and he declares "I am Optimus Prime" in Peter Cullen's voice. For the European release of the figure, to get past the language barrier, the Cullen sound clip is abbreviated to just "Optimus Prime"; in some regions, including Quebec and the UK (but only after a month or two), both versions were made available. A transformation sound effect activates when his torso is transformed, and once Prime is in truck mode, an almost unnoticeable button (a small square located beside the screw for the battery compartment, undocumented in his instructions) is revealed, which activates engine-idling noises.


Being a brand new and intricate remake of the Autobot leader, MP-10 was used as the gold standard in terms of scale for future Masterpiece figures, with all the upcoming releases being sized to best match him. Much like his older incarnation, he was also cherished by collectors, generating heated debates on which version is the best one up to this day.[5]
A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.
In 1984, a volcanic eruption re-activated the Ark, which, in turn, brought the Transformers back on-line. Prime led the Autobots in their opening battles to prevent the Decepticons from plundering Earth's resources, but, following their initial victory, the Transformers were all deactivated by Shockwave. Shockwave killed Prime and leeched the energy of the Creation Matrix from his mind. He used this energy to give life to his creations, the Constructicons. Shockwave was unaware that the Matrix was not just a program in Prime's mind, but a physical object in his chest. Before Shockwave could give life to Jetfire, his next Decepticon, Prime transferred the Matrix energy into the mind of Buster Witwicky. Buster used the energy to turn Jetfire on Shockwave, allowing Prime to reclaim his body and retake leadership of the Autobots. As a reward, he gave Jetfire true life.
Being only an inch and three quarters half, he is the second smallest transformable movie version of Optimus Prime around, only losing the first spot to the Q-Transformers version. Much like the normal-colors Bumblebee, he was available in both Series 1 and 2 of the line, with no noteworthy changes between releases. Not even their bag codes were altered. Their instruction books were updated to say "Series 2".
The sequel series, Transformers: Generation 2, began an undisclosed period of time later. At the beginning of the series, Prime was restored to a form resembling his original body. He and the Transformers found themselves caught in the schemes of a new generation of Cybertronians, led by the icy Jhiaxus, who were colonizing and cyber-forming other worlds. Plagued by nightmarish visions of a life-destroying entity called "the Swarm", Prime looked into Cybertron's past and discovered that Jhiaxus and his kind were the result of an unintentional Transformer reproduction. Their nature and intent, he found, was distilled to the purest, most unemotional form of conquest and that the Swarm was the by-product of this process. To fight this new enemy, Prime and the Autobots entered into an alliance with the recreated Megatron's Decepticons. Though Prime was eventually consumed by the abomination and destroyed, he was able to unleash the energies of the Matrix into the Swarm, purifying it. In parting, the Swarm recreated Prime in a new form, and he and Megatron set out to lead the united Autobots and Decepticons into a new age.
In "Prime Target", Lord Cholmondeley, a big game hunter, set his sights on the ultimate trophy, the head of Optimus Prime. In order to lure Optimus in, Cholmondeley captured Tracks, Bumblebee, Jazz, Beachcomber, Grapple, Blaster and Inferno. Windcharger and Huffer were able to avoid being trapped. When Cosmos learned where Cholmondeley was keeping the captured Transformers, Optimus Prime accepted Cholmondeley's challenge to meet him alone. Although interrupted by Astrotrain and Blitzwing's attempt to ally the Decepticons with Cholmondeley, Optimus defeated the big game hunter and freed the Autobots. Cholmondeley and the stolen jet were handed over to the Soviets by the Autobots as punishment for his actions.
At one time, Optimus Prime worked alongside Megatron, bringing order throughout dimensions with the power of SARA. But Megatron was ambitious, and sought to use SARA's power for his own ends. Optimus saved Metropolis from Megatron's rebellion, and the Autobots banished Megatron from Metropolis. Optimus Prime remained behind as the leader of the Autobots. Fate As head of the space-time guardians residing in Cloud World's Metropolis, he was a valiant and powerful leader who commanded the utmost respect from his subordinates. Optimus Prime stood for peace and freedom for all sentient beings in all of time and space. His sense of responsibility in this regard was a bit too great for his own good, as it often left him worrying about things outside of his control.
For the 1987 and 1988 lines, Hasbro introduced even more radical ideas through new sub-groups. The Headmasters and Targetmasters came with partners who transformed into the figure's head or weapon, respectively. Powermasters, including the new version of fan favorite Optimus Prime, came with partners that transformed into engines. Each line would see various permutations over the two-year span, including smaller Headmasters, Double Targetmasters, and a Powermaster with two engines.
This toy, as well as "Shake Bulkhead", was a bit of a chore to obtain. First you had to buy a Happy Meal on July 30th or 31st, which netted you a Dark of the Moon Optimus Prime or Bumblebee toy and a "weekend exclusive Special DVD and MechTech Sheet with red ticket". Said ticket was then traded in at participating toy stores when buying any Dark of the Moon toy to get one of the two charms. (Completing the set with "Potato Bumblebee" was considerably easier, at least.)

Over twenty-plus years, there have been a bajillion releases of this mold, some identical to the original toy, and some featuring significant variants with notably different paint jobs, color schemes, accessories and other pack-ins. We have striven to list all these variants on this page under their respective series; for a quick-reference list of all variants and releases check here. The cab robot has also been used sparingly to represent different characters; outfitted with different trailers, it has become Generation 1 Ultra Magnus and Pepsi Convoy.

×