It should also be mentioned that a few years back, I think around 2009 roughly, TLG started using smaller boxes for the same size sets. It was part of a move to not only save money, but also become greener as a company. Because the sets now take up less physical space on the shelf, and boxes with the same number of pieces appear smaller than sets from previous years, it could also contribute to the perception that you are getting less for your money today. In reality they are one and the same product.
In robot mode, Voyager class Optimus Prime is proportionally more accurate to his CGI design than the leader class toy and has a more accurate headsculpt, but due to the aforementioned lessened complexity significant sacrifices had to be made, such as "cheats" to the transformation sequence, to achieve this and thus he is overall less accurate than he initially appears. In addition to previously mentioned changes, he carries much of the truck's front hood, grill and fenders on his back like a backpack. However, he maintains a superb level of articulation and posability.
In "Sick Mind", Optimus is infected with the life-threatening Cybonic plague, prompting Arcee and Bumblebee to infiltrate the Nemesis to find a cure for the virus Megatron himself created. As Optimus grows weaker, he learns of Megatron's survival of the space bridge explosion. It was Bumblebee entering Megatron's mind via cortical psychic patch and retrieving the cure that saved Optimus. In the next episode, "Out of His Head", Optimus is, surprisingly, saved by the revived Megatron when he intercepted Starscream's attempted nosedive to kill him.
Smash & Change Optimus Prime is a simple figure that transforms by "smashing" the rear end of the truck/the robot's feet into the ground. He features only elbow articulation in robot mode, and includes a sword accessory that can be held in his hand or mounted on the side of his truck mode. The handle on the rear of his truck mode is molded to emulate his Vector Shield.

This figure was made available again, without any changes, in 2015, this time in new packaging resembling the then-concurrent packaging design for the Generations line, but replacing the name "Generations" with "Authentic Transformers". It was also given a new Hasbro product code number and UPC barcode, thereby technically making it a separate product. In 2017, it was re-released again, this time in a minor variant of the 2014 version's packaging (including the original product code number and barcode) that now lacked the reference to the non-existing "Reveal the Shield" gimmick.
Laser Optimus Prime transforms into a mid-1990s Western Star 4964EX, pulling a grey and black fuel tank trailer. The sides of the trailer are decorated with a sticker depicting Prime using a flamethrower to burn down a banner with the words "Optimus Prime Octane" on it. The truck is armed with a disc launcher on the roof of its trailer, which launches five blue discs bearing the Generation 2 Autobot insignia as a knob is turned. Like the other "Laser" toys released this year, Prime features electronics powered by two button-cell batteries; in truck mode, pressing the button on the cab's roof causes his headlight to light up with yellow LEDs.
If Optimus instead followed Prowl’s plan, he instructed his troops to transform into vehicle mode and play dead. The Decepticons, believing the Autobots’ ruse, disarmed themselves in order to carry out the Autobots’ “carcasses.” Now with the element of surprise against unarmed opponent, the Autobots Transformed and were able to easily defeat the evil robots.
It should also be mentioned that a few years back, I think around 2009 roughly, TLG started using smaller boxes for the same size sets. It was part of a move to not only save money, but also become greener as a company. Because the sets now take up less physical space on the shelf, and boxes with the same number of pieces appear smaller than sets from previous years, it could also contribute to the perception that you are getting less for your money today. In reality they are one and the same product.
When a new threat, the Elder Gods, appeared, a group of Autobots acquired the help of Tobias Muldoon and Nikola Tesla to travel to the glacier and waken Prime. Infestation 2: The Transformers #1 Tesla's Tesla tower wasn't enough on its own, so Wheeljack, Ratchet, Trailblazer, and Hound gave energy necessary to recharge Optimus Prime. Optimus awoke and revived the other Autobots with his energon reserves, before traveling to Port Cenotaph, Nova Scotia where an Elder God had risen from the sea. Diving into the ocean, Optimus cleaved parts off the Elder God until it and its followers returned to the depths. Though Tobias asked if the creature was dead, Optimus wasn't sure, but promised the Autobots would be there to defend Earth if it ever returned. Infestation 2: The Transformers #2 Infestation 2 #1

Knight Armor Turbo Changer Optimus Prime is a Voyager-sized figure that transforms from truck to robot in just 2-steps: pulling his whole truck kibble to the front then fold down to complete the robot mode, although converting him back requires some few steps. His only articulation is the elbows, and he features 5mm compatible hands. He also features a "Knight Armor" gimmick, which consists of his mask popping out to his head with the press of the button on his chest. Take note that you need to flip back the mask manually before you turn him back into Truck Mode.


For some reason: unlike the stock photos (pictured from the right), This Custom Kreon had a slight QC issue to the opaque and transparent helmets: One had two sides sculpted, while the other one has the small flat square sculpt (similar to the details on Hound's helmet) on the right side. Several samples had two different "variants": One with the perfect transparent helmet & a differently-sculpted opaque helmet, while the other one has the opposite. However: later releases fixes the problem by a running change.
At about 2/3 the size of the Smallest Transforming Transformers, this diminutive version of the original Generation 1 Optimus Prime toy is the smallest figure of the Autobot leader made to date. It was sold as part of Takara's blindpacked Mini Toy Shop Collection line, a series of miniaturized figures from numerous classic Takara toylines, including Transformers, Microman, Licca-chan, Choro-Q and others. Both of Prime's modes are represented by non-transforming individual figures, which come together in a two-pack. In-box, his truck form is even packed in a miniature recreation of his original Japanese packaging, which also includes a shrunken version of his sticker sheet. A tiny version of the original Takara Transformers catalog completes the set.
The original Optimus Prime toy, as well as the Diaclone Battle Convoy toy that it was based based upon, transforms into a late 1970s red Freightliner FL86 Cab-over-Engine triple-axle semi trailer truck. The truck mode features rubber tires, and the cab is partially constructed of die cast metal. The windscreen section can open to reveal ultimately-unused seats that were originally designed for Diaclone's driver figures.
In addition to being probably the most popular Generation 2 figure, Laser Optimus Prime was, prior to 2003, a regular contender for most popular Transformers toy ever, back in the days of the annual Transformers fan awards, "The Trannies." The toy won twice, and actually lost once to his repaint, Scourge. The launch of the Armada and Alternators line, along with Masterpiece Prime, saw Laser Prime drop down that list distinctly.
Part of the fifth wave of Kabaya's revival of the Transformers Gum series, this snap-on transforming model kit of War for Cybertron Optimus Prime is sculpted from red, light blue, and gray plastics, and uses stickers for detail. He comes with a blue non-transforming version of his hand-held blaster rifle, which mounts at the rear in vehicle mode. He comes packed with a model kit of Tigerbreast, and a stick of gum.
This golden chromed redeco of the Super class Optimus Prime figure was initially offered as a prize to five lucky winners of a colouring contest held in the pages of the TV Magazine. Additional units were later given away via in-store draws at Toys"R"Us Japan; precisely how many is unknown, but the regularity with which the toy appeared on auction sites throughout 2005 suggests it was quite a few.

The protoform mode consists of eight pieces of metallic blue plastic that plug into the arms, chest, pelvis and legs of the figure. With these pieces attached, the figure can be manipulated in a manner that might charitably be called "transformation" into his meteor-like "entry mode," accomplished by doing little more than tucking the head out of sight and folding the chest back. This blue-and-grey lump can be mounted on a three-piece stand that comes with the figure, allowing you to display it in mid-plummet. Optimus Prime's Earth mode, meanwhile, is made up of many armor pieces (including a particularly large backpack) that form a rather kibbly robot mode, which can then transform into a truck approximating a Peterbilt 379. We would go into what an abominable, unintuitive, parts-massaging mess this transformation is, but we wouldn't want to fill up the rest of the page.

But it is scary to think that there is a strong possibility they will look at redoing almost every Masterpiece now if this is a success. The MP+ releases have me feeling tired. I don’t have to get them but I have a completionist mentality. But a redo... I’m almost ready to check out of MP completely. I waited so long to get six seekers done pretty well to me. Now there’s a chance they will redo them. And soundwave. I sure hope I’m just being a worry wart.
This mold was redecoed into Universe Optimus Primal and Beast Wars Telemocha Series DX Convoy, and retooled into Beast Wars Reborn/Beast Wars Tenth Anniversary versus pack Optimus Primal. Takara also created multiple special variants, including all-gold (from Tele-V Magazine, only ten awarded), red and gray (Tele-V again, but only one awarded), and blue-fur (a Comics Bom Bom design-contest prize, only five awarded).
One more thought: LEGO is a Danish company. The fluctuations in the price of LEGO such as the big bump around 1985-7 in Figures 1 and 2 could be because of a change in exchange rates. The conversion rate between the Danish Kronor and the US$ went from over 10 in 83 and 84 to less than 7 in 86 and 87. LEGO might have been slow to respond to changes in exchange rates, leading to the temporary bump. If you’d like to share data we can redo your graphs in DKK.

Alternity Convoy was simultaneously available in both this silver coloration, and a deco based on his traditional appearance termed "Vibrant Red" (see below). The figure was later redecoed to create "Convoy Super Black" (representing not Optimus Prime, but Universe Nemesis Prime), Alternity Ultra Magnus, and Alternity Dai Atlas. It was retooled into Transformers GT GT-R Prime, GT-R Saber, GT-R Megatron and GT-R Maximus.


"Cybertron Optimus Prime" new features a darker grey plastic, and mostly shares the same paint mask to the original Deluxe class figure, with added paint details on his head and the mesh-like pattern on the front of his "entry" mode. The silver paint on his chest was slightly changed from the original and he lacks the paint on his feet, his "headlights", and the top of his "entry" mode. Lastly, he features Cyberglyphics on his vehicle mode windows, and the rear sides of the vehicle. His flame attachment is now cast in translucent red plastic with orange sprays.
Or instead of adding a surface to the package, sell it with its own little plaque / platform. A really thin piece of hard plastic or something that is smooth as well as possibly having a graphic or something printed on it. And then market it as a collectible and only make so many of them. I'm thinking in the price range of $199-$299. I'm not sure the costs going into it, so I can't say.
In "Transwarped", after Sari realizes that she is not human, Optimus attempts to have Professor Isaac Sumdac and Sari reconcile with each other. Later, they encounter Masterson, who is piloting his headmaster unit on Starscream's decapitated body. He defeats Masterson by tricking him to transform into vehicle mode, which was impossible due to with the Headmaster unit on Starscream's body. Later still, during a melee with a rock creature that found its way to Earth when Bumblebee returned from his accidental transwarp, Optimus struggles to stop Sari, who goes out of control after using her key to upgrade herself.
A gold chrome remold of the 2007 movie Leader Class figure by Hasbro Hong Kong. Limited to 88 units, with only 10 released to the public at the 2008 Animation and Comic Show convention; all of which were sold only to the first 10 people to spend more than HK$3,000 at the Hasbro booth. Because the figure is permanently fixed to the trophy base, it is no longer transformable.[131]

After a thousand years of war on Cybertron, the planet was shaken from its orbit and risked being smashed to pieces by an asteroid field. Optimus decided to take a group of Autobots in the Ark and destroy the asteroids, but they were attacked by the Decepticons, and Optimus crashed the ship on Earth. Four million years later, the Ark repaired them, and they encountered Sparkplug and Spike Witwicky. Sparkplug suggested to Prime that the Autobots tap the volcano they'd crashed into for power. The two humans also warned the Autobots of an impending Decepticon attack, and Optimus laid a trap. Unfortunately the Decepticon forces attacked from all directions, and Starscream's null-ray put Optimus out of commission. Luckily Sparkplug easily fixed him, and his fast recovery inspired the Autobots to chase the Decepticons off. Optimus vowed to protect this new world. Battle for Cybertron
If there was one thing the toy planes of yonder were lacking, it was controllability. Guaranteed crash landings and the subsequent walks of shame to go pick up the pieces started to wear a little thin. The advent of radio-control provided an answer for that. But for model builders Aviation Design, that was child's play. Hense, the birth of the FALCON 7X business jet.
Power Surge Optimus Prime's scannable Autobot insignia is on his robot mode left shoulder. As he's packaged in robot mode, this badge is easily scannable while still in-package. Like his wavemate Bumblebee, this figure eventually saw release in the 11th wave of the Warrior Class line with the "Combiner Force" packaging. His scannable sticker is also altered, but scanning the badge only unlocks Energon currency, but not the character. This also applies to the original release's badge, but it unlocks 8 Ultra Sparks instead.
From this chart, you can see that there has been no real trend in the price per piece in these particular sets. The weighted average (larger sets weigh heavier than smaller sets) for the price is 13.19 cents per piece. The size of the ships did seem to increase in the last couple years; however, 3 data points does not make a trend (I will visit this idea later). For those of you who had a pirate ship growing up (I was lucky enough to get the Skull’s Eye Schooner), you may not have realized it, but it wasn’t cheap. And, the prices in this chart do not take inflation into account.
The TakaraTomy version, part of the seventh wave of Japanese Prime toys, is dubbed Arms Master Optimus, uses darker, metallic plastics, casts the backs of his thighs in metallic red, replaces his metallic silver paint with glossy gray, and replaces a few of his paint operations with customer-applied foil stickers, such as his insignias, shins, headlamps, the tiny yellow lights on his torso, and the blue deco on his truck panel sides. He has also been retooled with additional 5mm pegs for his thighs, roof, and lower backpack, as well as ports for his forearms, shoulders, smokestacks, fuel tanks, and roof. Instead of the rifle, he comes with a very large Matrix which can tab onto his chest as armor or mount onto the back of the truck cab, with the Matrix also being covered in 5mm posts and holes so that Arms Microns can be attached to it. He additionally comes with a clear-blue "Shining" version of the Arms Micron, R.A., who can combine with the Matrix to form the colossal Matrix Saber.
While the other Autobots searched for the Matrix on Earth, Optimus Prime searched for Vector Sigma, guided through the dangers of the planet's catacombs by the spirit of Alpha Trion. Prime eventually arrived at the computer, only to find his way barred by Cyclonus and Scourge. At that moment, Hot Rod arrived with the Matrix, the same with which Alpha Trion merged, re-energizing it. The Matrix transformed Hot Rod back into Rodimus Prime and, for the first time, the two Primes fought side-by-side and defeated Galvatron. Before Rodimus could implement the Matrix to stabilize Vector Sigma, however, Optimus Prime merged himself with the computer, restoring its balance to save the planet. Optimus Prime sacrificed himself, dying again only a few short episodes after his rebirth. Later, Prime would make a final and permanent return in the Japanese Transformers continuity, Battlestars: Return of Convoy. This entry was only available in print, appearing in the TV Magazine, a Japanese publication.
Arms Master Optimus's "Space Blaster Mode" is a mode designed for fighting in outer space, introduced in the Cybertron Satellite segment of "Infinite Transformation! Multiplying Enemies". He wears R.A. and Shining R.A. on his shoulders as wings, C.L. and C.L. GR on his back as thrusters, and B.H. and B.H. B on his feet as... more thrusters. His weapon of choice in this mode is the Matrix Blaster.

Prime appeared again in the fourth crossover called "Black Horizon". When Hawk, who had been afflicted by the Matrix, began getting dire visions of a new threat, Prime journeyed to Earth. He took Hawk and Flint to Tibet to discover the source of the problem, only to encounter Bludgeon once again. Prime battled Bludgeon and only won due to intervention by Hawk. Fighting their way into a secret city beneath the Himalayas, the trio realized the extent of the threat. At stake was the impending destruction of humanity by Unicron and the world being taken over by Cobra-La. Optimus and Hawk were discovered by Bludgeon and a group of Cobra-La troops. Prime defeated Bludgeon, then, with Hawk and Joe Colton, gatecrashed the Cobra-La ceremony to sacrifice Firewall to Unicron. Prime was mobbed by Cobra-La warriors and pinned down by a monstrous insectoid creature. Prime demolished them in time to save Hawk from Golobulus. With Cobra-La arrested by G.I. Joe, Prime made sure his comrades were okay before sitting down to watch TV with Eject and Firewall.
3. Licensed themes: In the 80’s the Lego sets were more generic and interchangeable among themes. There were the basic Space, Town, Castle themes. The color schemes within a theme were more homogeneous (i.e. Blacktron sets or Mtron sets all had a common color scheme). Since there was no “fictional” real life object being copied, piece selection tended to emphasize versatility over “realism”. Almost every Lego set of the past had pictures of alternate models featured on the boxes and instructions that was meant to inspire a child to not just build the model featured in the instructions, but to embark on the mental challenge of making their own creations.

Prime filled one of the chase figure slots for the tenth wave as well. This rare figure was the same as the regular Super Mode PVC, except instead of wielding his Convoy Gun, Prime was armed with the Star Saber sword. As with the previous chase figure, it could only be found in one out of every ten cases, and took the place of the full-colour Prime figure in that assortment.

4. Collectability/Internet/Ebay: While Lego has always been a somewhat collectible product, the age of the internet has increased the collectability of Lego. Nostalgic adults came together on the internet to trackdown and re-acquire sets from their child hood. I think Lego has embraced this as evidenced by large limited edition sets aimed at the adult market. This is also evident in the increase in tempo of development of sets and themes that drive the collector to want to buy more and more; which overall is good for Lego. In the past, an individual set and theme seemed to have more life than they do now.

Having launched a painstaking review of each of those 14,200 pieces in the LEGO universe, the Design Lab found that 90 percent of new elements were developed and used just once. And many components were duplicates. Among the dupes were eight minifig police officers and six minifig chefs, with barely decipherable differences between them. The Lab dealt with the redundancies by slashing the total number of components by more than 50 percent. When it reduced the product portfolio’s minifig chef population from six to one, designers protested and longtime fans howled. To calm the fans, LEGO tried humor: it held a mock online memorial service for the “dead chefs.”
Star Convoy was reissued by Takara in 2005, with some notable alterations to his deco: his white plastic was replaced with metallic silver, and the yellow star on his chest was chromed golden. Star Convoy himself retained some of his original decals but most notably his "simulated head lights" and "wind shield panels" were stamp graphed on him, similarly, Hot Rod's were replaced with the same stamp graphing applications. Additionally, where the original toy had been packaged in robot mode in a tall box decorated with the standard Japanese package art of the time, the reissue was packaged in vehicle mode, in a long, wide box more reminiscent of the original Generation 1 toys.
The Autobots helped repair a Smitco Oil Refinery site which the Lazarus-controlled Transformers had attacked. Optimus had no answer for Spikes accusation that the Transformers' presence on Earth was responsible for the destruction. When Megatron's activities at Lazarus's base were spotted by the military, Optimus insisted on the Autobots going in without backup. They discovered Megatron in the middle of a plan to reformat Earth into a new Cybertron using a cyber-virus. Optimus rejected Megatron's suggestion he should just let it happen, but while the two factions fought, the human military unleashed Operation Clean-Up, dropping a bomb on them. Prime Directive #3
In the United Kingdom, this Optimus Prime was released as an Argos exclusive along with several other sets branded as part of the Reveal the Shield subline imprint. His United States release was initially claimed to be exclusive to Target by online retailers from Asia, but even though the other Reveal the Shield products eventually became available at Target, Voyager Class Optimus Prime was released as a Toys"R"Us exclusive in the United States instead, complete with a "Toys"R"Us exclusive" sticker. Also, both his United States and Asian releases lack the "Reveal the Shield" logo the United Kingdom release has (but still feature the "Reveal hidden images" call-out).
There may be two things you didn’t know in this one: 1) Bumblebee is in the Transformers Hall of Fame; and 2) There’s a Transformers Hall of Fame. The shrine to all things Transformers was the brainchild of Hasbro, the American toy company that worked with Japanese toy company Tomy to create the Transformers in 1984. Starting in 2010, they wanted to honor not just popular characters, but also the real people behind the toys, TV shows, comics, and films.
The Transformers Energon figure pen is based on Optimus Prime in his standard Energon body. About the size of a scout class toy, he transforms from truck mode to robot mode almost identically to his mainline toys, apart from the fact that his feet contain the pen and cannot bend. It's really hard to write with, and almost impossible to pose, even though it has full arm articulation. Amusingly, this figure can position itself to transform into his super robot mode (by flipping his helmet on, opening his chest and flipping his hands in), but because there are no versions of the Prime Force drones in this scale, it's impossible to complete him.
He resembles previous Optimus characters in robot mode: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.
Optimus Prime is the leader of the main group of Autobots in the iteration of the Transformers franchise primarily marked by the 2010 computer animated series Transformers: Prime on The Hub.[16] Optimus Prime was created as the last of the Thirteen Primes, the first generation of Transformers, each created directly by Primus as a band of unique warriors to combat and defeat Unicron. Upon his creation, Optimus united the Thirteen by his greeting All are one. While all of the other members of the Thirteen each possessed unique abilities and artifacts, Optimus wielded no special powers or weapons. It was only through his vision and courage that allowed the Thirteen to finally defeat Unicron. Reborn through the Well of All Sparks, Orion Pax became Optimus Prime, a veteran military commander and second in command who wields an ion blaster and a double bladed energon axe. He became the leader of the Autobots after Sentinel Zeta Prime fell in battle, but is not certain he wants the responsibility.
As seen in the episode "War Dawn", Optimus Prime began his life as a robot named Orion Pax, a mostly defenseless dock worker during the Golden Age of Cybertron nine million years ago, with a girlfriend named Ariel and a best friend named Dion. During this time, a new breed of robot with new flight capabilities appeared on the planet that Orion idolized. When Megatron, the leader of the new group of robots, approached him with inquiries about using one of the dock warehouses, Orion was swayed by Megatron. Both Orion and Ariel were severely wounded when Megatron and his forces attacked in order to claim the energy stored there. Searching for someone to help them, the time-displaced Aerialbots took Orion and Ariel to the ancient Autobot, Alpha Trion, who used them as the first subjects for the new reconstruction process he had developed involving rebuilding the frail Autobot frames into more battle-hardy configurations. With this reconstruction, Orion Pax became Optimus Prime, the first of the Autobot warriors.
Optimus Prime was the central figure of Kabaya's final Cybertron candy toy series, Change Galaxy, which was themed around his combinations with Leobreaker and Wing Saber. In addition to being transformable (again, through partial disassembly), this figure of Prime combines with the Change Galaxy versions of his partners, forming Savage Claw Mode and Sonic Wing Mode. Prime himself came packaged with an alternate Super Mode head and his leg armour in order to complete his appearance in each of these forms. Additional Super Mode pieces were not created for this line, as that wasn't the point.

Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such.[11] Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.
Part of the first wave of Generations: Combiner Wars Voyager Class toys, this is a bigger, bulkier incarnation of Optimus Prime with a striking resemblance to Ginrai. He comes with two blasters which he holds via 5mm post. One of the guns is based on his trademark Ion Blaster, and both weapons store on the back of his vehicle mode as a makeshift engine block. His torso mode has several details that appear to be influenced by Energon Optimus Prime's super mode, including the head, chest, and thighs. In particular, the chest details are modeled after the Spark of Combination. He also features two pair of fake windows on his robot and gestalt chest halves. The combiner head can be used as a robot mode head if you're feeling silly.
Prime's trailer opens up into his Combat Deck, containing the scout drone, Roller. The interior of the Combat Deck features three pegs that can accommodate Prime's laser rifle, fuel pump and nozzle accessories, and seating for two Diaclone drivers. As its central feature, the Combat Deck features a missile-armed repair drone pod mounted upon a boom lift arm (featuring another cockpit for a Diaclone driver), which can also be extended through holes in the trailer's roof and front-end when it is closed. Situated in the base of the boom arm is a spring-loaded launcher that can launch Roller out of the Combat Deck and into action. Roller himself has seating for four Diaclone passengers, and features a port that can accommodate either Prime's rifle or the fuel pump. The interior space of the trailer allows storage room for one standard Autobot car, which can also be shot forward by the launcher.
×