Four million years ago, Optimus Prime ended a Decepticon attack on the Ark by directing it towards prehistoric Earth. When both factions reawakened in 1984, Optimus Prime and the Autobots fought the Decepticons on numerous occasions until 2005. During an attack on Autobot City on Earth, Prime fell in battle against Megatron and passed the Matrix of Leadership to Ultra Magnus.

While stock photos and renders show the figure with a faceplate, this image posted by the Transformers Facebook page shows him with his mouth exposed. This was later found as a variant at least once. A running change was made, changing the blades to be more translucent. The semi-translucent blades release features a date code "73461", whereas the translucent orange blades version features a date code written as "80171".


This Classics Optimus Prime is a smaller, Deluxe Class figure with a noticeable physical resemblance to Takara's Robotmasters Prime figure, and a transformation that is about as successful. The figure is armed with a tommy gun-shaped laser rifle that transforms into a turret-like configuration and mounts on the rear of his truck mode, and features a spinning "power punch" action that sees the whole upper half of his torso spin when a button on his back is pressed. Pressing the button "unlocks" the spinning mechanism; pull hard on the button, and you can lock the torso back into place.
One of the Mini-Con limb-bots (Soundwave helmet) is based on the original movie version of Optimus. The main torso-bot is based on Generation 1 Optimus's original body. Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). And the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
At some point, Optimus Prime disappeared under mysterious circumstances, and Ultra Magnus arrived from Cybertron to take his place as Autobot commander. Galvatron's Air Attack Prime eventually returned many centuries later, now sporting a Powermaster body, and rejoined the Transformers' war after it had moved from Earth to the alien planet of Nebulos.
After the film, in season three, Rodimus did not have time to rest on his laurels as commander, immediately finding himself and the Autobots targeted by the Quintessons, who lured him to their planet of Quintessa and detonated it in hopes of destroying the Matrix. Rodimus and the Autobots survived, however, and Rodimus proceeded to voluntarily short-circuit himself to allow his life-force to enter the Matrix, feeling that the answer to the mystery of the Quintessons' identity lay within it. His hunch proved correct – the Quintessons, he discovered, were the Transformers' creators, and Rodimus knew that the future would be a difficult time for the Autobots.
With the acclaimed Studio Series line marching onward triumphantly into 2019, we have just received a new review of the line’s latest offering, Battle-Damaged Megatron, which most of us know emulates Megatron’s appearance following the climactic final showdown between him, Optimus Prime and the Fallen in the second film. The review comes courtesy of YouTuber PrimeVs.Prime, who has thus far extensively catalogued the line beyond today’s subject. He goes into detail regarding the detailing - Read More
The figure's transformation scheme is based on the original G1 figure, the only differences being that the fists are not removed but become the headlights, and instead of flipping backwards inside the chest, Diablock Convoy's noggin flips forwards with the aid of opening chest windows. A "laser rifle" in the shape of his ion cannon can be built from black bricks, and stickers bearing the Autobot faction symbol can be placed on his shoulders, although this is not recommended as it is designed to permanently stick to multiple tiles which dislodge easily and may damage the sticker.
Cloud Optimus Prime is a redeco of the Classics Voyager Class Optimus Prime mold, transforming into a modern cab-over style truck of made up model, dominated by a large "energy unit" on his roof (actually a wind vane). He features a similar Generation 1-inspired deco to the original toy, but aims for a "cleaner" appearance by omitting many paint details such as stripes on the cab, while the energy unit is colored black with a silver Autobot insignia in homage to Generation 2 Optimus Prime. In robot mode, Prime's energy unit transforms into a large blaster and his smokestacks transform into a smaller laser cannon. Additionally, both weapons can combine together to form a double-barrelled over-shoulder weapon. He was available exclusively at TakaraTomy Mall.

Unite for the Universe Optimus Prime would have been a redeco of the 2007 Optimus Prime Voyager-Class mold in a similar style to the Leader-Class Buster Optimus Prime (see below), with a much more accurate and detailed paint scheme, including white stenciled flames. He would have come with a set of Jetfire armour parts to form the powered-up Optimus Prime seen at end of Revenge of the Fallen, and due to not having to form Jetfire's robot mode or his jet mode, the armour parts are far more accurate to the movie's design of them than the leader class Jetfire toy could manage. While not combined to Optimus Prime, the armour can be arranged to form a sort of weapon emplacement mode or a jet engine on the back of Optimus's vehicle mode.
Categories: 3H Enterprises charactersAction MastersAutobotsConvoys (Transformers)Devil's Due charactersTransformers automobilesFictional characters introduced in 1984Fictional commandersFictional refugeesScience fiction film charactersFun Publications charactersGo-BotsTriple ChangersMaximals (Transformers)PowermastersPrimes (Transformers)Robot superheroesSpy ChangersTransformers AlternatorsTransformers characters in video gamesTransformers: Energon charactersTransformers: Prime characters
Most notably in terms of new tooling, the panels on the undersides of Powermaster Optimus Prime's forearms feature slots under the fists, which allow the guns to tab in and be held much more stably than with Ultra Magnus. And due to the amount of empty space in the cab area in vehicle mode, Powermaster Prime can fully transform without the need to remove his head.
Due to the interference of Ravage, the same as the one who appears in the Beast Wars, most of the events of the original animated feature do not transpire. The most influential of these events is the Battle of Autobot City. Because this battle did not occur, Optimus Prime and Megatron do not have their final showdown. This means that, for this continuity, Optimus Prime does not die and Megatron is never reformatted into Galvatron. As a result, Optimus Prime is able to lead the Autobots during the Binaltech saga.
It should also be mentioned that a few years back, I think around 2009 roughly, TLG started using smaller boxes for the same size sets. It was part of a move to not only save money, but also become greener as a company. Because the sets now take up less physical space on the shelf, and boxes with the same number of pieces appear smaller than sets from previous years, it could also contribute to the perception that you are getting less for your money today. In reality they are one and the same product.
Having been caught unaware by a surprise attack launched by the Decepticons, Optimus led his troops in a losing battle against their mortal enemies. Though Optimus managed to dispatch a few Decepticons, namely Thrust, whom he punched through the chest, he soon found himself crippled and surrounded by enemy forces. Praying to Primus as the Decepticons readied their weapons, Optimus heard Grimlock calling out to his fellow Dinobots to combine, prompting the Autobot leader to yell out a plead to Grimlock to stop. It was too late, however, and The Beast began rampaging, killing Autobots and Decepticons alike. Taking advantage of the situation nonetheless, Optimus tackled Megatron and began beating on the Decepticon leader. The tide of the battle now shifted, Optimus attempted to reach Grimlock’s consciousness within The Beast so that its mindless carnage could come to a halt. It didn't work. The Beast Within
Knight Armor Turbo Changer Optimus Prime is a Voyager-sized figure that transforms from truck to robot in just 2-steps: pulling his whole truck kibble to the front then fold down to complete the robot mode, although converting him back requires some few steps. His only articulation is the elbows, and he features 5mm compatible hands. He also features a "Knight Armor" gimmick, which consists of his mask popping out to his head with the press of the button on his chest. Take note that you need to flip back the mask manually before you turn him back into Truck Mode.

A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.
One of the single rarest Lucky Draw Figures in existence, this "Custom Color" redeco of Super Optimus Prime was limited to only one in the world. It was the grand prize of a coloring contest held in Septemeber 2005's TV Magazine, in which entrants colored in lineart of Prime with the deco they wanted to see. The winning entry was in green, blue and gold, while ten runners-up received one of five gold or five silver Lucky Draw versions of Prime.

One of the Mini-Con limb-bots (Soundwave helmet) is based on the original movie version of Optimus. The main torso-bot is based on Generation 1 Optimus's original body. Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). And the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
Categories: Art FeatherAstronBeelzeboss StudioBTS ToysCHMSDaCa ToysDMY StudiosDr. WuDream FactoryFansProjectFansToysGeneration ToyHeadrobotsHeerotoysmakerIGearImpossible ToysJunkion BlacksmithJustIToysKaziKOLDMaiden JapanMaketoysMastermind CreationsMasterShooter CollectiblesMech IDeasMGSPerfect EffectPlanet XPlay With This TooRenderformReprolabelsToyworldTransformersTFC ToysWarbotronX-TransbotsXovergenYom-GZenith Forge

Optimus Prime can also combine with Leader-class Jetfire to form Jetpower Optimus Prime by slightly transforming his backpack and feet. Sadly, this takes away from his leg articulation, because otherwise he could never support the massive backpack he has in this mode. However, fans have created alternate configurations that increase leg articulation and movie-accuracy.

In Axiom Nexus, General Optimus Prime found himself inducted into the Convoy, a group of Optimus Primes and their kin dedicated to safeguarding the multiverse. While the other Convoy members tended to stay in the upper reaches of Axiom Nexus, the General was able to use his unusual appearance for an Optimus Prime to venture in the Offworlder zones without suspicion, a great help to Offworlder Zone Security Administration Commander Cheetor. The General was also assisted in his new mission by his longtime scout, Sergeant Hound. General Optimus Prime profile card Sgt. Hound profile card


Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is an extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation 1 and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
The only differences with the unreleased version, aside from the packaging, are that silver paint has been added to the previously unpainted grill/fender area, the blue paint operations have been changed to teal, and the red Autobot insignias have been replaced by purple Decepticon ones. Prime's bio apparently explains that he took on this new color scheme in order to infiltrate the Decepticon ranks, in response to recent attacks by some new Decepticon forces pretending to be Autobots.
Released to conclude the 10th Anniversary of the live-action film series, Masterpiece Movie Series Optimus Prime is a brand new mold that transforms from a 25cm-tall robot (a little taller than MP10 Convoy) resembling how the character appeared in the first live action movie into a Kenworth W900 modified Peterbilt 379, with many of the engineering cues being distinctively based and improved on the ROTF Leader Class mold. His transformation takes a whooping 43 steps, making it one of the most complex Masterpiece figures to date! (Although this pales in comparison to MP-36 Megatron's 107 steps.) .
Optimus confronted his archenemy on the battlefield, though he had to knock Starscream aside to get to him first. Due to a nearby explosion that rocked the battlefield, Optimus nearly lost both his stance and his head when Megatron took advantage of the opening. But Optimus's quick reflexes allowed him to shift to vehicle mode and back, dodging Megatron's attack and striking back in the process. As the battle raged on, both combatants found themselves evenly matched. Then Ratchet contacted Optimus with dire news; the Decepticons had managed to abduct SARA! Fate
A retool of Lockdown with a new head. He is a simplified toy that can auto-transforms from an unlicensed approximation of a Lamborghini Aventador rather than a Lamborghini Centenario LP770-4 into a Voyager-sized robot by pulling out the arms first, and then flip the figure over itself. He features articulation on his arms, and features 5mm compatible hands.

In addition to being probably the most popular Generation 2 figure, Laser Optimus Prime was, prior to 2003, a regular contender for most popular Transformers toy ever, back in the days of the annual Transformers fan awards, "The Trannies." The toy won twice, and actually lost once to his repaint, Scourge. The launch of the Armada and Alternators line, along with Masterpiece Prime, saw Laser Prime drop down that list distinctly.

The set is a counterpart to TakaraTomy's simultaneously-available Transformers Animated Sons of Cybertron set, which also features translucent versions of that line's Deluxe Optimus Prime and Rodimus figures. It was intended as an exclusive for the Japanese Chara Hobby 2010 festival, but was also initially offered as a raffle prize at the 2010 "Autobot Alliance" event in the Philippines.,[1] and was later available for purchase at Cybertron Con 2010 in Shanghai.
Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.
Toymaker Fischer Price was the knight in shining armor on this one with the creation of their Power Wheels line. At first, Power Wheels vehicles were very basic with small electric motors and rudimentary Jeep-like styling. Now, Fischer Price has unleashed a car that says "When I grow up, I want to be too rich to care about the environment." This giant bastard comes with tinted windows, a set of dubs and even a fully functional FM transmitter which, no doubt, blasts shitty radio static through its real-live rear subwoofers.
© 2019 Hasbro.com All rights reserved. All audio, visual and textual content on this site (including all names, characters, images, trademarks and logos) are protected by trademark, copyrights and other Intellectual Property rights owned by Hasbro or its subsidiaries, licensors, licensees, suppliers and accounts. By using this site, you agree to the Terms and Conditions of Use.
At this point in the future, the Autobots had become something of a group of peacekeepers among the many races in the galaxy, and Rodimus would attend many meetings, parties and conferences to this end, most notably chairing the peace conference between the planets of Xetaxxis and Lanarq. Despite the brave public face he wore at these events, his own doubts continued to plague him, and he was particularly fazed by Galvatron's threat of an "ultimate weapon", though the revelation that this was a bluff stirred him to action. Later still, Rodimus was among the Autobots who had their minds transferred into synthetic human forms by crime lord Victor Drath, who used their Transformer bodies to commit crimes. While Ultra Magnus, Arcee and Springer tackled this problem, Rodimus returned to Drath's compound where he was aided by Drath's mole, Michelle, between whom a spark of romance seemed to bloom, until she betrayed him to Drath. Through a combined effort, however, Drath was brought to justice and the Autobots regained their bodies.
Like the original figure, Powermaster Prime is composed of two major components: his truck cab, which transforms into Prime himself, and his trailer, which is essentially a heavily-armed version of the original. The trailer has a fold-down ramp to allow the storage of a smaller Transformer, or perhaps spare accessories. The trailer transforms into a battle station armed with two long black rifles and two grey double-barreled cannons (featuring seating for Powermaster engine figures), all of which Optimus Prime can also wield in his fists.
×