The morning after a particularly vicious battle, Optimus listened to birdsong and pondered life as a giant robot, before asking Ratchet and Huffer for a damage report. The Autobots were puzzled when the Decepticon Seekers (and Laserbeak and Buzzsaw) did a flyby on their camp, as the Decepticons were similarly damaged after the battle, but Shooting Star reported that the Decepticons were trying to distract them while an attempt was made to secure a broken-down oil truck a few miles away. Optimus took a small group to investigate, and successfully aided the humans in getting their truck moving. Swoop was instrumental in stopping the Decepticon attack, and Optimus commended the Dinobot for his valor. Decepticon Hijack
Optimus was made available as a mail-away toy in the "Digital Doom on the Highway to Destruction" offer in the US in 1986 to coincide with the Transformers movie in 1986. He cost $21.50 and 5 robot points, and came with a special Movie Edition Certificate and a round sticker that read " Movie . Edition . Transformer" with the Autobot symbol in the middle. (This item is considered rare.)

Optimus found himself carrying into battle many miniature robots and machines to the battlefield in the palm of his hand. Among these was a Micromaster city, Micromaster micro bases commercial, the Race Car Patrol, Micromaster Patrols commercial and the Hot Rod Patrol. He and Jazz checked out the Hot Rod Patrol, and Optimus wondered if they could transform. Hot Rod and Construction Patrol commercial

Several Autobots and Decepticons, including Optimus Prime, were reformatted into will-less war machines under the control of Cobra. During an initial attack on a human peace conference, Cobra's remote control of Optimus (whom they had nicknamed "HISS-14") mysteriously failed. G.I. Joe vs. the Transformers #1 Later at Cobra's island headquarters in the Caribbean, Cobra scientists pulled Optimus apart to find out what was impeding their commands. As this analysis took place, Optimus reverse hacked into Cobra computers until they shut him down in a panic. G.I. Joe vs. the Transformers #2 Despite this, Prime sent a viral message out to hundreds of email addresses that included the coordinates of Cobra's base. The message was intercepted by G.I. Joe who teamed up with Wheeljack and Bumblebee. After Wheeljack broke the remote control over the Transformers, Prime went after Cobra Commander. G.I. Joe vs. the Transformers #3 More than a bit frightened of a giant robot gunning for him, the human released Megatron, who was trapped in gun mode. Megatron transformed and fought Prime to a standstill until other Autobots came to back him up. G.I. Joe vs. the Transformers #4
The color scheme of this special redeco of Super class Optimus Prime was decided through a colouring contest held in the December 2004 issue of TV Magazine, in which entrants coloured in lineart of Prime in the scheme they wanted to see. The winning entry rendered Prime in a... distinct palette of grey, cream, dark red, and purple chrome, with blue, white, and yellow drones. It was limited to only ten pieces, making it one of the rarer Transformers toys in existence.
A heavy retool of Combiner Wars Ultra Magnus, this Optimus Prime is based on the Powermaster Optimus Prime toy from 1988. Despite this, Hi-Q (now renamed 'Autobot Apex', presumably for trademark reasons) doesn't form the engine on Prime's chest; instead, he transforms into a de-faceplated version of the original Powermaster Optimus Prime cab robot head, over which a helmet slides during transformation to complete the Powermaster Prime look. In all three of Optimus Prime's modes are various pegs and seats with which Titan Master figures can interact. Like other Leader Class figures, his base mode can connect to other Titan Returns figures with base modes.

Rodimus Prime/Minor is a character who appeared in season 3 of the Transformers Animated series. He is a homage to the Generation 1 version of the character Hot Rod.[17] He wields an energon bow-and-arrow weapon of his own design.[18] On March 31, 2009, Derrick J. Wyatt, lead Transformers Animated Character Designer posted an image of Rodimus' vehicle mode, which is described as a futuristic muscle car that is mostly based on a 2008 Dodge Challenger with some elements of a 1969 Ferrari Daytona. This was revealed at the 2009 BotCon where Hasbro released an action figure of Rodimus Minor. It showed that the 2008 Dodge Challenger parts of Rodimus' vehicle mode were mostly based on the back, top, and sides of the vehicle, while the 1969 Ferrari Daytona parts were found in the front of the vehicle, most notably, the headlights.

The figure's transformation scheme is based on the original G1 figure, the only differences being that the fists are not removed but become the headlights, and instead of flipping backwards inside the chest, Diablock Convoy's noggin flips forwards with the aid of sideways-opening windows, akin to Masterpiece Prime. A "laser rifle" in the shape of his ion cannon can be built from black bricks, and stickers bearing the Autobot faction symbol can be placed on Diablock Convoy's shoulders, although this is not recommended as it is designed to permanently stick to multiple tiles which dislodge easily and may damage the sticker.
Hey now, dont lump all geewunners together lol. Im all about g1, and love seeing g1 inspired, yet evolved designs. Such as the bee movie, and the recent toy lines. That said, I do respect others opinions. My son prefers bayverse on most and thats ok. I hate bayverse designs (except barricade and nitro zues in the last movie, badasses) but alot of people grew up on that, and it makes hasbro money, so no reason to hate it all together.
This redeco of the Ginrai tooling of the Powermaster Optimus Prime figure (released concurrently with the 2001 reissue of the Ginrai figure) was a Toys R Us Japan exclusive black repaint, made to represent the original Optimus Prime equipped for a special mission. All of his red and blue plastics were changed to black, his clear blue windows were now tinted red, making his overall colour scheme very reminiscent of the now-familiar 'Black Convoy' color schemes.
From this chart, you can see that there has been no real trend in the price per piece in these particular sets. The weighted average (larger sets weigh heavier than smaller sets) for the price is 13.19 cents per piece. The size of the ships did seem to increase in the last couple years; however, 3 data points does not make a trend (I will visit this idea later). For those of you who had a pirate ship growing up (I was lucky enough to get the Skull’s Eye Schooner), you may not have realized it, but it wasn’t cheap. And, the prices in this chart do not take inflation into account.
Commander class figures all come with translucent weaponry, and feature some amount of translucent plastic in their bodies (blue for Autobots, but a variety of colors for Decepticons), a feature designed around interacting with the line's vehicles (see below). Each vehicle is equipped with an "Energon Booster", a light-up accessory that can plug into the Commanders' weapons or into the posts and ports on the figures' backs to illuminate them with "glowing energon power".

Get ready to turn heads with TRANSFORMERS MIGHTY MUGGS Figures. Call it a moodswing, or call it a moodSPIN, these TRANSFORMERS MIGHTY MUGGS figures feature a push-and-turn mechanism that lets fans change the figure’s facial expression by pushing down on the head. With 3 different expressions and classic character designs, these figures will have fans doing a triple take. Characters include BUMBLEBEE, OPTIMUS PRIME, MEGATRON and more. Each sold separately. Available at most major retailers and on HasbroToyShop.com.
This minor redeco of the Optimus Prime Launcher features grey wheels, blue optics, and added red paint on its upper arms, while the launcher has grey plastic in place of black, smaller Autobot symbols on its sides, and gold paint on its interior instead of silver. The stock photography on the packaging depicts Optimus with a blue stripe on his built-in "trailer", which was omitted in the final product.

In Transformers Ongoing, which takes place two years after the events of All Hail Megatron, the Autobots would remain on Earth as Prime feared the return of the Decepticons. Unfortunately, this led to the capture of a number of Autobots by Skywatch, including Windcharger, Gears and Prowl. Hot Rod was reformatted into a Pagani Zonda. Already frustrated, he lashed out at Optimus, accusing him of keeping the Autobots on the planet because he needed someone to protect and demanding he be allowed lead a team to rescue Prowl. An admonished Prime agreed to a covert operation, but with Ironhide along to watch over things. While Prowl was freed, it turned out the humans had used him as bait to draw the other Autobots in. However Wheeljack's new shielding protected Hot Rod's team from Skywatch's inhibitors and in a panic the soldiers switched to lethal measures. Hot Rod was targeted and Ironhide was killed protecting him. An enraged Hot Rod turned on the humans, damaging their equipment and machinery.

The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[19] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original transformers toy line.


In just seven years, from 1997 to 2004, the number of elements in the company’s inventory exploded, ascending from slightly more than 6,000 to more than 14,200. So did its range of colors, which climbed from the original six (red, yellow, blue, green, black, and white) to more than fifty. As the number of components and colors mounted, soaring supply and production costs plundered the company’s bottom line. Here’s why.
1. Color diversity: Back in the 80s, most sets were comprised of a few basic colors; red, blue, yellow, white, gray, and black. It was much easier to acquire a “critical mass” of pieces in each color to start building one’s own creations in coherent color schemes. Space, Town, Castle sets all had the same basic colors. Today Lego uses a much wider array of colors in their sets. While this adds a lot of variety and visual appeal to today’s sets, this means that one has to buy a much larger number of sets (or scour bricklink) to get achieve a workable critical mass of pieces in each color. After buying some of the modern sets, I end up with a few dark-blue or lime-green pieces that I don’t really have enough to much with other than use as accent colors. They end up in my misc color bin in the event I decide to build the set they originally came with or sell them off on bricklink.
Hasbro's original plan for the Beast Wars was to have Optimus Prime, renamed Optimus Primal, and Megatron be reformatted versions of their 1980s selves. This was shown in the toys's Tech Specs, and in the comic packaged with the basic Optimus Primal/Megatron two-pack. Hasbro also wanted the "Mutant Heads" found on all of the deluxe sized first year toys as battle helmets, but Mainframe scrapped the idea as it would have required three animation models for each character instead of two. Another designed feature for the 1995/1996 toys was carried over from Generation 2, transparent "light pipe" eyes. However, most toys had those parts cast in opaque plastic.
Available exclusively from Japanese clothing company A Bathing Ape in 2014, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a green color scheme matching the Convoy Reissue BAPE Ver. of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.

The smallest of the Energon Igniters, the 3-inch Speed series transforms between modes in 7 steps or less. Unlike previous small movie figures, this series has a lot of detailing and articulation. The bots don’t end up looking like carved blocks of plastic. They could use a few more paint apps, but that’s to be expected at this price point. They even interact with cores sold with the larger figures (though “interact” in this case seems to mean “tow behind”).

The Autobots subsequently returned to Cybertron aboard a refueled and repaired Ark with the defeated Decepticons, taking the Decepticons on Cybertron unawares and quickly capturing control Cybertron. Peace reigned for a time until a series of natural disasters began, the source of which was determined to be the planet Moebius in a parallel universe. The Autobots assembled a team to travel to this alternate universe and stop the threat; Optimus Prime personally led the team, unwilling to put anyone in more danger than himself. Wheeljack, Hoist, Jazz, Prowl, and Silverstreak constituted the rest of the team; they dubbed themselves Spy Changers because they aimed to achieve their goal with stealth and diplomacy. The team modified their bodies to match the native cyborgs using data acquired from the Sky Spy and traveled to the 22nd Strata but were soon attacked by the local Guardians, who mistakenly presumed them to be Renegades. The Spy Changers were then rescued by the real Renegades, who presumed them to be potential allies and took them back to their flagship, the Rogue Star. Renegade leader Cy-Kill attempted to court the Spy Changers as allies, but Optimus saw through Cy-Kill's deception. Eventually, the Autobots formed a secret alliance with the Guardians as well as discovered the cause of Cybertron's troubles: Renegade bases on Moebius were draining the planet's energy. The planet's geometry had turned it into a crude Dimensional Interfacer, and Moebius was tapping into Cybertron to sustain itself. Hoist was able to end the crisis by triggering the bases' remote detonation sequence. Cy-Kill was furious, but in the ensuing battle, the Autobot-Guardian alliance triumphed over the Renegades. Optimus Prime and Leader-1 shook hands as a symbol of the transdimensional friendship, and the Autobots returned to their home reality, secure in the knowledge that they had allies in places as distant as alternate realities. Ask Vector Prime, 2015/09/30
Though Optimus was a master marksman, he had a personal policy against shooting directly at his opponents' bodies during his races. In one such race, he allowed his rival to take the lead so that he could use his favorite weapon, the Impact Wrench Gun, to blast the road beneath the other racer's feet, causing him to lose his balance. Transform in a gust! When GT-R Megatron burst onto the scene, roaring that all previous races had failed to "ignite his warrior's spark," Optimus readied to give him the race of a lifetime. GT-R Megatron Attacks! Like other racers, GT-R Prime attended photo shoots alongside Misaki in order to promote coexistence between humans and Transformers. The Work of the GT Sister Race Queens? When a reincarnated Unicron attacked the Transformers GT finals and absorbed the huge energon pool saved up for the final prize, Prime restored his true power by using the "Matrix In" process to recombine with Misaki. Together with the other powered up racers, he fought and defeated Unicron, saving the Earth. The True TFGT
The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.[6][7]
Honestly, all the charts were done in Excel. I tried other methods but that was the easiest since all my data was in excel already. They are X,Y Scatter plots with sooth lines – heavily tweaked. Made the lines thicker which makes it look smoother and changed the layout a bit to make it clearer. The Excel defaults are ugly but if you spend enough time tweaking them you can get something passable.
A fourth version is shown in the 1987-88 Transformers product catalog that has several minor differences from both Powermaster Prime and God Ginrai, such as having God Ginrai's sliding fists but in red, a completely different trailer hitch assembly partially based on the third design, an offset Autobot symbol in base mode, extended feet also based on third design, far more detailed super mode outer leg panels, completely different front bumper, and the first instance of single faux shoulder smokestacks rather than two. It is still unknown as to why Powermaster Prime has completely different arms from God Ginrai or all earlier concept versions.
Released as part of the first wave of the Energon Igniters Nitro Series, this Optimus Prime is a new Voyager-sized mold that converts from a robot based on his Age of Extinction body into a truck in 11 steps, and he features 5mm-compatible hands & articulation on his head, arms, and only his upper legs. He also features built-in Ion Cannons in this lower leg panels, activated in vehicle mode. He also comes with his own energon core, which is a different mold from his Power Plus toy.
Optimus and Wheeljack returned to Autobot HQ after an absence to find Grimlock had taken leadership. Though they failed to resist him, he soon bored with leading the Autobots and let Optimus take command again. Me, Grimlock, King Impressed with Bumblebee's success as team leader, Optimus assigned Pipes to lead a team. The B-Team Part Deux With Optimus badly damaged and without the Matrix, the Autobots were driven off Earth and sought refuge on Cybertron. Once Optimus had recovered, he put together a team which returned to Earth and retook it from the Decepticons, with Optimus badly damaging Megatron in combat. All Hail Megatron
When I was a child in the 1960s, I bought most of my own Lego, using money from paper routes I had from the ages of 7-16. But the items I bought we not ‘kits’. They were small boxes of standard bricks. Each box contained only a single shape and colour, but you could find most of the basic shapes 1×1 or 1×2 or 1×4 or 1×8, 2×2 or 2×3 or 2×4, bevels, doors or windows, if you found the right box. The boxes were only 50 cents, and had an average of 12 bricks per box. That works out out to about 4-5 cents per brick. The kits were expensive, but buying the standard boxes was a lot cheaper, and that is what most people did back then. With my paper route, at the age of 7 I could buy 100 pieces per week using my own money. Name any 7 year old that afford to do that now!
The values started becoming inconsistent and skewed in Generation 2 and Beast Wars, when Hasbro apparently thought no child will ever want a toy that is described as anything less than perfect. Thus it became rarer and rarer to see any low numbers. Most characters' numbers hardly ever dipped below 8, the Go-Bot version of Optimus Prime was the first character to have all values at 10, a trend that would repeat for most "leader" characters. When even more powerful versions of the Optimus Primal toy (such as Optimal Optimus) were introduced, Hasbro even invented a "10+" rating in an attempt to keep increasing the power levels. With the Transformers: Cybertron line a few characters even got "Unknown" and "Infinity" ratings.
The TakaraTomy version, part of the first wave of Movie Advanced Series toys, is dubbed "Classic Optimus Prime", and opts for a deco closer to Prime's previous on-screen appearances, omitting the blue paint on his feet and hands to reveal the gray plastic underneath, and adding new paint details all over. Instead of painting it in clear light blue, his light-piping eyes is neutered with opaque light blue paint. In terms of quality control, at least one sample has missing it's silver paint on the head's left cheek.
The original Optimus Prime toy started life as the Diaclone toy, "Battle Convoy", created by a team of Takara designers who came on board when the original designer fell behind. This team included Hiroyuki Obara (listed as the sole creator on the toy's patent) and famed mecha designer Shōji Kawamori. The toy transforms into two major components; the first component being a red and blue White Freightliner WFT-8664T cabover semi-trailer truck partially composed of die-cast metal, and the second component being a large silver trailer of currently-undetermined model.
×