Arms Master Optimus's "Space Blaster Mode" is a mode designed for fighting in outer space, introduced in the Cybertron Satellite segment of "Infinite Transformation! Multiplying Enemies". He wears R.A. and Shining R.A. on his shoulders as wings, C.L. and C.L. GR on his back as thrusters, and B.H. and B.H. B on his feet as... more thrusters. His weapon of choice in this mode is the Matrix Blaster.

After weeks of Decepticon silence, Optimus Prime decided to get proactive and sent out patrols all over the planet to try and flush the villains out. None of the patrols reported back with any success, however, and Prime realized that there was one area of the planet that his troops had deliberately ignored: the mysterious "Nebulos Triangle". Quickswitch, Scoop and Quickmix were sent into the Triangle, and they did indeed discover and foil the Decepticon plot going on in the area. Decepticons Underground
Hasbro's Toys R Us-exclusive 2003 reissue of Powermaster Optimus Prime was actually a modified version of Takara's then-recently reissued God Ginrai set. As such, the cab was partly constructed out of die-cast metal, vacuum-metalized plastic and had clear blue windows. The trailer was retooled so the super robot's fists could slide in and out of the arms. This set also included the originally Japanese-exclusive Apex Bomber drone trailer that attached onto the back of Optimus Prime's trailer in vehicle mode, and could become extra armour in super robot mode.The missiles where unchromed and lengthened due to safety issues as opposed to the Japanese release which were chromed and shorter.
Prime: First Edition Matrix of Leadership Optimus Prime converts from robot mode to his truck mode. He comes with a gun than he can wield with his hands, as well as peg onto his hitch in vehicle mode, with different pegs for either configuration. Similar to a previous Optimus Prime toy, he features some faux-kibble in the form of his actual windshield chest being covered by sculpted panels featuring his characteristic windshield-chest. His arms are slightly longer than his original design's arms.
Rodimus appeared in the text-based fiction Dungeons & Dinobots as one of the Autobots who attacked the Arch-Ayr fuel dump. Sent to capture rogue Dinobots for the Autobots, he was part of the group that captured Swoop. Together with Blurr, he then tracked Grimlock, but ran into competition with the Decepticon allies Sideswipe and Cliffjumper. After Grimlock bit off his left hand Ratchet replaced it with a circular saw (a reference to one of the original Rodimus' melee weapons in The Transformers: The Movie).
In our list of things you didn’t know about Optimus Prime, we learned that the live action version of Optimus was based on actor Liam Neeson. It turns out Michael Bay likes to base his Transformers on real actors, because it’s been revealed that Bumblebee’s character movements are based on Michael J. Fox-- but not just regular old Michael J. Fox; we’re specifically talking about Marty McFly in the Back to the Future movies.
Due to the interference of Ravage, the same as the one who appears in the Beast Wars, most of the events of the original animated feature do not transpire. The most influential of these events is the Battle of Autobot City. Because this battle did not occur, Optimus Prime and Megatron do not have their final showdown. This means that, for this continuity, Optimus Prime does not die and Megatron is never reformatted into Galvatron. As a result, Optimus Prime is able to lead the Autobots during the Binaltech saga.
Interesting work but I would like to know whether you would find the amount of new sets offered in toto has changed over the survey period. Is there an economy of scale at work? This seems to have two implications: first, the number of units for a particular set may have increased thereby affecting the price of all sets belonging to that class (but doubtful you could find exactly how many Death Star sets were produced in relation to, say, hogwarts castles); second, the popularity of certain set classes may affect what kinds of sets are available. Like with language, we are all confined to use the words we know. And so with Lego, set designers are confined to use what’s economical, unless, of course, the design calls for new styled pieces. These relations are difficult to grasp in statistical analyses, but would seem to play a role in price steering.
In "Decepticon Air", Optimus receives a secret distress call from the Elite Guard ship that is carrying Decepticon prisoners. During the flight, the ship enters an electrical storm, which revives an inactive Swindle and he frees other prisoners to take over the ship. Transwarping to the ship via Swindle's personal transport field, Optimus joins forces with the Elite Guard, rounding up most of the Decepticons in the end.
Smash & Change Optimus Prime is a simple figure that transforms by "smashing" the rear end of the truck/the robot's feet into the ground. He features only elbow articulation in robot mode, and includes a sword accessory that can be held in his hand or mounted on the side of his truck mode. The handle on the rear of his truck mode is molded to emulate his Vector Shield.
This sculpt was redecoed by Takara into a golden Lucky Draw figure and later released in its original coloration with a trailer as a "Perfect Edition" (see below for both), while Hasbro would later redeco it into their Classics-branded "DVD Edition". The mold was also used to make Masterpiece Ultra Magnus and "Convoy Black Version", representing one of many drones built in Prime's image, rather than Prime himself.

This gold vacuum metallized version of Optimus Prime is a prize in Hasbro's Asia Age of Extinction campaign. To qualify for winning this toy, one must be the biggest spender of the day during the midnight launch of the AoE toyline at specific Toys R Us or participate in a lucky draw. This toy is limited to 7 pieces. 2 are in mainland China, while Hong Kong, Malaysia, Thailand, Singapore, Taiwan each have one.
In the Autobot Campaign, Optimus Prime provides intelligence and missions to Bumblebee in his search for the Allspark. Eventually, the clues lead the Autobot to Sam Witwicky. After saving Sam from Barricade, Bumblebee finally completes preparations for the Autobots to arrive on Earth. Once on Earth and having informed the two teenagers of their mission, Prime and the Autobots are discovered by Sector 7. Optimus sends Jazz on a high-speed destruction distraction mission, then sends Ironhide to rescue Jazz from a double-threat posed by the government agents and various Decepticon scouts. When Bumblebee is captured, Prime transforms and chases the chopper which from which the small Autobot is tied. After a lengthy chase, Prime manages to catch the net, only to be thrown off by another Cybertronian meteor. As Bumblebee is carried away, Optimus promises he will not fail him again. Jazz informs him that the meteor is not an Autobot. Prime confronts the new threat, who turns out to be the Decepticon triplechanger Shockwave. The two battle it out across Tranquility before Optimus finally destroys him. During the battle, Optimus overhears Starscream's transmission revealing the location of the Allspark. Optimus then returns to an intel role as he guides Bumblebee in his mission to retrieve the Allspark from Hoover Dam. Unfortunately, the Decepticons manage to free Megatron, leading to the final battle in Mission City. As the Autobots battle it out with the Decepticons to protect Sam and the Allspark, things seem to take a turn for the worse as Megatron finally arrives. Before he can claim the Allspark, Optimus attacks him. Optimus defeats Megatron and leaves him on the ground, seemingly devoid of life. However, just as Sam is giving the Allspark to Optimus, Megatron awakens, leaping at Optimus with his chain-flail out, making one last attempt at defeating his adversary. Optimus grabs the chain, pulling Megatron in closer, and, with the Allspark clutched in his fist, delivers a punch through Megatron's spark, killing him. Optimus reflects on the losses and rewards of this battle, as the Autobots have a new home, but many were killed in the battle. The story ends with Optimus and the Autobots choosing to remain in Earth, proclaiming it as their new home.
With this reconstruction, Orion Pax became Optimus Prime, the first of the Autobot warriors. Optimus took the mantle of leadership as the civil war against the Decepticons erupted, and would remain in that position for the next nine million years. Ariel was rebuilt into Elita One, the commander of the Autobot resistance on Cybertron. The fate of Dion is left unrevealed. It has been speculated by fans that Dion might have become Ironhide or Ultra Magnus just as Orion and Ariel became Optimus and Elita, but this remains fan speculation only, and, his close friendship with Optimus notwithstanding, there is no evidence to support the idea.
Oddly, he had a different plate in those films when in car mode: 900 STRA. In Dark of the Moon, they finally decided to keep his robot and car mode plates consistent. In robot mode in the Dark of the Moon and Revenge of the Fallen video games, he wears 5BBM2. 5LKZ213 was seen in some set photos of robot mode for the first film. Various models for promotional exhibits have featured KDM 0814, FXPERTS, and, of course, BUMBLBE.

Convoy iPod Docking Bay pulls an all-white trailer of similar proportions to his vintage G1 load, with rear wheels and discreet propping feet so it can also stand alone. The trailer transforms (sorta), by rotating a substantial wedge of its full length 90 degrees, kinda like a rectangular Rubik's Cube. This exposes two small speakers and "reveals" an alcove (although a huge gap is still clearly evident in trailer mode) featuring an electronic port in which to plug an iPod or iPod nano, thus becoming a working iPod dock. The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer.
When you’re a Cybertronian robot-alien who could easily blow any human to bits if you wanted, having a license plate can’t be that important. Really, if you’re in car mode and a cop pulls you over for not having plates, and sees that you also don’t have a driver, and then perhaps sees you turn into a giant robot, what exactly is that cop going to do?
With the Japanese Binaltech toy series having transformed into the Kiss Players line, the second figure to be released as a Kiss Players character was Hot Rodimus. Based on the same Ford GT mold as Mirage, Hot Rodimus features several differences from Mirage. First, it has a unique head sculpt, which includes a movable crest to allow a "visor" to be lowered over his eyes, referencing a scene from the animated Transformers Movie during which Hot Rod is on Lookout Mountain. Additionally, it includes a fishing-rod accessory, which can be split and connected in a different configuration to create a tri-barreled arm weapon, reminiscent of Hot Rod's exhaust-pipe blasters. The figure also includes a PVC figurine named Syao Syao and a CD featuring a Kiss Players radio drama. The vehicle mode stays true to the Ford GT's factory color scheme, lacking Hot Rod's signature "flame" detailing, and, like Binaltech, is fully painted. Meanwhile, the robot mode reveals additional orange and yellow body parts, such as the chest, abdomen, arms and hands, as well as flame-like paint applications on the lower arms to link the figure with the original Hot Rod.
Released to conclude the 10th Anniversary of the live-action film series, Masterpiece Movie Series Optimus Prime is a brand new mold that transforms from a 25cm-tall robot (a little taller than MP10 Convoy) resembling how the character appeared in the first live action movie into a Kenworth W900 modified Peterbilt 379, with many of the engineering cues being distinctively based and improved on the ROTF Leader Class mold. His transformation takes a whooping 43 steps, making it one of the most complex Masterpiece figures to date! (Although this pales in comparison to MP-36 Megatron's 107 steps.) .
The final scraping was done in Python. A long time ago when I started it, the prototype was in a language called DM or byond. This is a language created for the purpose of writing 2d online rpgs. It was my first language and was easy to pick up but this was pushing its limits a bit. I actually ran the first scrapping on my other post (the Politics one) in this language. The results were not what I used in the article but it was a good proof of concept.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-Hobby in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
Though Optimus was a master marksman, he had a personal policy against shooting directly at his opponents' bodies during his races. In one such race, he allowed his rival to take the lead so that he could use his favorite weapon, the Impact Wrench Gun, to blast the road beneath the other racer's feet, causing him to lose his balance. Transform in a gust! When GT-R Megatron burst onto the scene, roaring that all previous races had failed to "ignite his warrior's spark," Optimus readied to give him the race of a lifetime. GT-R Megatron Attacks! Like other racers, GT-R Prime attended photo shoots alongside Misaki in order to promote coexistence between humans and Transformers. The Work of the GT Sister Race Queens? When a reincarnated Unicron attacked the Transformers GT finals and absorbed the huge energon pool saved up for the final prize, Prime restored his true power by using the "Matrix In" process to recombine with Misaki. Together with the other powered up racers, he fought and defeated Unicron, saving the Earth. The True TFGT
In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.
×