Hero Optimus Prime was the first new-mold Optimus Prime toy created for the Generation 2 line. He transforms into a Kenworth truck of unknown model which defies Optimus convention by being one continuous unit, rather than the traditional cab-and-trailer combo. Decals form the windows of a faux truck face to represent his chest, featuring both his name and what appears to be a life support readout coming alive towards the end. In addition to a small gun, he is armed with a large missile launcher, which can fire a rubber-tipped rocket by means of a bellows which you slam your fist down on to produce a puff of air. The launcher is accessible in both modes, ending up mounted on his right forearm in robot mode; the bellows is attached via a rubber hose and cannot be disconnected, but stores on the figures's back when not in use, as do the rockets. A similar air-launching system with identical missiles was used by the simultaneously-released Hero Megatron, and by Laser Optimus Prime the following year (see below).

The Optimus Prime Kreon in this set is based on the character's rusty, crusty "evasion mode" from the Age of Extinction movie. He has a ferrous-metal backpack, which is used to interact with the magnetic parts in the various sets. In this specific set's case, it's so he can be grabbed by the buildable Strafe's dino-claws, once Strafe uses said claws to open up the "laser" cage made to contain Optimus. (Yeah, we know Strafe appears way after Optimus ditched this look in the movie.)

When Sergeant Hound apprehended a criminal going by the name "C-81", rumors that the prisoner was in reality a "Megatron" that had gotten past the TransTechs' security procedures piqued General Optimus Prime's interest. Though Cheetor assured him that it was impossible for a "Megatron" to have been allowed in Axiom Nexus, the General's concerns did not fade. More pressing concerns took over, however, when the entirety of Axiom Nexus, and nearly all of the TransTechs suffered a sudden shutdown due to a surge in the Global Net. General Optimus Prime tasked Bruticus with keeping guard over the prison while he and Hound went to investigate the source of the surge, the planet's core.
He is designed with a removable head, biceps, arms, and legs, all of which use the same clip-peg/hole joint. This means his pieces can be swapped around in any order, as well as swapped with any other Hero Mashers figure... which includes figures from Marvel Comics, Star Wars, and Jurassic World, meaning you can make some pretty freaky combinations.
Optimus suffers from a design flaw that many other Voyager Class figures in the Combiner Wars line experience: the detents, or "click points", on the heavily-ratcheted outward motion of his hips (which also form the hips of his torso mode) are few in number and very far apart. As a result, Prime's legs have great difficulty assuming the natural "A-stance" formation that the angled design of his foot sculpt seems to have been meant to accommodate. Likewise, when forming the torso of Ultra Prime, the interactions of the knee-lock mechanism and the hip detents almost always force Ultra Prime's legs into either an awkwardly knock-kneed arrangement or an equally awkward, and often unstable, bow-legged posture (as seen in the image to the right) that prevents Ultra Prime from standing flat-footed. Unlike Motormaster, this version of Optimus was the only one to not receive the improved hip ratchets implemented in its future releases in some shape or form by Hasbro, though they would be used for the Battle Core redeco later in the line. However, there are third party ratchet replacements for the hips.
When the Decepticons tried to take control of a solar energy station, Prime sent Roller in to investigate. Megatron's Fight for Power Later, Prime sent Bumblebee to spy on the Decepticons' latest misdeeds, and the Autobots discovered that they were having trouble with the ion drive of their starship. Prime led the Autobots in an attack on the mine the Decepticons were using to test their propulsion system and routed Megatron's force. Autobots Fight Back
Optimus Prime is one of the playable Autobot characters in the 2010 video game Transformers: War for Cybertron. In the Autobot campaign, he starts off as Optimus, a warrior who rallies his fellow autobots against the Decepticons following the reported death of their leader Zeta Prime. He succeeds in defending the Autobots' home city of Iacon from Starscream and his forces. Optimus then receives a distress call from Zeta Prime. Knowing that this is most likely a trap set by Megatron, he proceeds anyway with a rescue mission. He lets himself, Bumblebee, and SideSwipe be captured by the Decepticons and is sent to a prison in Kaon, the decepticon capital, in an elaborate scheme to free Zeta Prime and all imprisoned Autobots. He frees all the other prisoners, and defeats Soundwave and his minions Frenzy, Rumble, and Laserbeak, but he is too late to save Zeta Prime. After taking Zeta Prime's body back to the Autobot high council, he is bestowed upon the well earned title of Prime.
Part of the sixth wave of Custom Kreons, and the first (and only) Robots in Disguise-themed wave, Optimus Prime uses the new 2015 Kreon construction with the hollow waist-peg and "raised" hands.. He comes with a buildable parts rack on which to hang/store his extra pieces. Unlike the previous Custom Kreons, he no longer features a chromed helmet, and comes with an extra clear-plastic helmet, torso, legs, and his arms, plus a chromed Bazooka (originally from the Kre-O Battleship sets), and some kind of a dual pick-axe with a clear red staff.

Originally, the Alternators Dodge Ram mold was intended by Hasbro to be a completely different character altogether than Optimus Prime (which character is unknown), but Takara reportedly demanded the Ram be made into Optimus out of fear that the toy (whose vehicle mode is scarce in Japan as a real vehicle) wouldn't sell as well in their market if it wasn't a popular and easily recognized figure; as the figure reportedly cost twice as much to build as the others, Hasbro had to agree in order for Takara to continue fronting part of the production cost. In an ironic turn of events, the Dodge Ram was prematurely solicited by Takara not as "Convoy" (Optimus Prime), but as his Masterforce look-alike Ginrai. As a matter of fact, the head sculpt for the Alternators Oprimus Prime toy is based on the Super Ginrai (Powermaster Optimus Prime's "super mode") toy's head sculpt. Ultimately, however, Ginrai was cancelled, with only Hasbro releasing Optimus Prime as originally planned. Eventually, Takara released the Dodge Ram as as part of the new Kiss Players line, now named "Convoy" (Optimus Prime), and he will be released in Binaltech this year.

TakaraTomy released another reissue based on the Encore version as part of their Chronicle line in 2011, lacking the original Generation 1 trailer. Instead, the Chronicle version was available in a two-pack with Dark of the Moon Deluxe Class Optimus Prime and a new trailer that could be used by both Optimuses, thanks to a retooled trailer hitch on the Generation 1 Optimus Prime figure.


When we are young, we do not know the value of money let alone the toys we play with. Our parents work tirelessly to buy us the newest, most popular toys and we never realize the effort that went into earning that money. Eventually we get our own jobs and have our own kids. The prices of the toys we had as kids comes as a shock. $150 for a toy? $200 for a toy? These prices are outrageous. It is supposed to be a kid’s toy right? Our eyes may be drawn to the large sets but that doesn’t mean that reasonably priced sets are not nearby. In addition, as I stated before, LEGO has started to market some of their sets to an older audience. That $400 Super Star Destroyer is not for your kid; it is for you. This market didn’t exist 20 years ago.
Though Optimus was a master marksman, he had a personal policy against shooting directly at his opponents' bodies during his races. In one such race, he allowed his rival to take the lead so that he could use his favorite weapon, the Impact Wrench Gun, to blast the road beneath the other racer's feet, causing him to lose his balance. Transform in a gust! When GT-R Megatron burst onto the scene, roaring that all previous races had failed to "ignite his warrior's spark," Optimus readied to give him the race of a lifetime. GT-R Megatron Attacks! Like other racers, GT-R Prime attended photo shoots alongside Misaki in order to promote coexistence between humans and Transformers. The Work of the GT Sister Race Queens? When a reincarnated Unicron attacked the Transformers GT finals and absorbed the huge energon pool saved up for the final prize, Prime restored his true power by using the "Matrix In" process to recombine with Misaki. Together with the other powered up racers, he fought and defeated Unicron, saving the Earth. The True TFGT
A (technically) unreleased "black" redeco of Henkei Voyager-sized Convoy using the same plastic layout and paint mask but replacing red and blue with black, silver with gray, leaving the previously vacuum-metalized grill/fender area unpainted, changing the blue tint for the windows to red and changing all silver and yellow paint operations to blue. The red Autobot insignias would have remained unchanged.[7]
This version of Optimus Prime is an all new mold, being the most movie accurate so far — or at least he was until Buster Prime came out. It comes with his two energon blades, and does not have a large gap at the back of the cab like the previous Leader-class Optimus Prime. It can combine with Leader class Jetfire to form Jetpower Optimus Prime. He is also very hard to transform. The process involves unclipping his firewall from his chest in a fashion that harkens to dissecting toys that lack screws, rivets or glue. In the meantime, he keeps saying, "I am Optimus Prime," over and over due to an overly sensitive voice clip trigger. Even the most die-hard Peter Cullen fan will be sick of his voice after five minutes of playing with this toy. That aside, the quality and articulation is top-notch and the poseability is amazing. Spring-loaded panels feature in his legs as well as ratcheting ball-and-socket ankles, G1 "transforming" sound effects, and multiple "Mech Alive" features raise the bar on this figure. Of note, the fists cannot accomodate standard accessories, and on test-shots of "Power Up" mode Prime has articulated fingers, like the 2007 toy, but this feature was dropped. Also, trying to transform Optimus from robot to vehicle mode can be very difficult at first.
It should also be mentioned that a few years back, I think around 2009 roughly, TLG started using smaller boxes for the same size sets. It was part of a move to not only save money, but also become greener as a company. Because the sets now take up less physical space on the shelf, and boxes with the same number of pieces appear smaller than sets from previous years, it could also contribute to the perception that you are getting less for your money today. In reality they are one and the same product.
The paint deco is... unfocused, to say the least. In vehicle mode, the grill, headlights, bumps (thus his feet) are painted silver, yet the red in the small Autobot insignia has been removed. There is silver paint on the fuel tanks (toy battery cover), but not on the other tool boxes and equipment in the same location. There is also silver paint on all 6 wheel rims, the air cleaners and the windscreen visor. In robot mode the silver paint is mainly located on his thighs and crotch, though in order to save on costs, the dark blue and gold paint on his thighs and knee joints have been sacrificed.
The third version [5] would quite possibly have been the most gimmick loaded Transformer in the history of the line, simultaneously being a Powermaster, Headmaster, and triple changer. The Headmaster also would have been a triplechanger, turning into a sort of armored four-wheeled rover (Roller II?) and robot as well as a rather silly looking Optimus Prime head with four vertically aligned wheels jutting off the sides. It seems that when the extra Headmaster gimmick was scrapped, the super mode head remained separate rather than being reintegrated into the trailer hitch such as on the earliest design. Notably, the body of this design is extremely close to the final design.
With the Japanese Binaltech toy series having transformed into the Kiss Players line, the second figure to be released as a Kiss Players character was Hot Rodimus. Based on the same Ford GT mold as Mirage, Hot Rodimus features several differences from Mirage. First, it has a unique head sculpt, which includes a movable crest to allow a "visor" to be lowered over his eyes, referencing a scene from the animated Transformers Movie during which Hot Rod is on Lookout Mountain. Additionally, it includes a fishing-rod accessory, which can be split and connected in a different configuration to create a tri-barreled arm weapon, reminiscent of Hot Rod's exhaust-pipe blasters. The figure also includes a PVC figurine named Syao Syao and a CD featuring a Kiss Players radio drama. The vehicle mode stays true to the Ford GT's factory color scheme, lacking Hot Rod's signature "flame" detailing, and, like Binaltech, is fully painted. Meanwhile, the robot mode reveals additional orange and yellow body parts, such as the chest, abdomen, arms and hands, as well as flame-like paint applications on the lower arms to link the figure with the original Hot Rod.
A golden-chrome redeco of Cybertron Metroplex was offered as a contest prize in the December 2005 issue of TV Magazine, and came with an equally blinged-out Legends/EZ Collection Optimus Prime figure. Fifteen of this set were available as prizes in the initial contest; a single Metroplex was later offered as one of many prizes in a Takara website contest, but this version came only with the standard metallic paint version of Prime.
After his attack on Optimus Prime, Megatron was thrown out of the Ark when Blackarachnia activated the ship's defense systems. However, he was not thrown far enough and the Predacon managed to reenter the Ark and blast the Autobot leader, decisively erasing the Maximals from the timeline. A Change to the Agenda This had the effect of producing a wildly different timeline.
Prime comes with a unique Cyber Key, designed after the twin-handled appearance of the Matrix of Leadership, bearing the code l8p3. When inserted into the cannon that the rifle is part of, a pair of additional spring-loaded missile launchers flip down from the its sides. Slotting the key into the electronic cannon opens up the panels covering the front of the barrel, unlocking a different sound with its button is pressed. The paint job of the key is the principal difference between the Hasbro and Takara versions of the figure; the Japanese release features a metallic gold paint border around the key, furthering its resemblance to the Matrix. Other differences include more thoroughly painted knees and leg-armor cannons, yellow-painted signal lights above the cab, and the use of metal hinges to hold on Prime's wing tips, which were removable on Hasbro's version, and came disconnected in-package.
An exclusive to Amazon.co.jp, this redeco of Optimus Prime is bundled with the Japanese release of the Revenge of the Fallen DVD. He is another in a long line of black repaints, swapping most of his red and blue plastic for black, some of his bright grey plastic for a cool grey and blue, and is covered with gold and silver flames. His orange blades are now translucent blue.
A Mega Super Collection Figure of Prime in his "normal mode" was released a few months after the first figure. He came with a translucent blue Star Saber, and a much larger version of the Convoy Gun accessory, creating a sense of comparative scale, even though he's the same height as the Super Mode figure. Like the Super Mode figure, only his right fist has a peg-hole in it, so he can't hold both weapons at once.
Optimus dueled Megatron atop of an overpass in a human city. Though he managed to knock Megatron's cannon loose early in the scuffle, Megatron managed to turn the tables on the Autobot leader, reattach his primary weapon, and blast his old foe. When Megatron moved in for the kill, Optimus got his second wind, and knocked Megatron clear off the overpass. They were always real to me.
The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[19] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original transformers toy line.
The figure's transformation scheme is based on the original G1 figure, the only differences being that the fists are not removed but become the headlights, and instead of flipping backwards inside the chest, Diablock Convoy's noggin flips forwards with the aid of opening chest windows. A "laser rifle" in the shape of his ion cannon can be built from black bricks, and stickers bearing the Autobot faction symbol can be placed on his shoulders, although this is not recommended as it is designed to permanently stick to multiple tiles which dislodge easily and may damage the sticker.
Part of the first wave of Prime: Beast Hunters Series 3 Cyberverse Commander Class toys, Optimus Prime is an all-new mold. He now transforms into a monstrous, flat-nosed truck with spiky fenders at the front and a cage compartment at the back, and comes with the Thunder Lance and Star Saber. Each of the weapons features two differently-placed 3mm posts, allowing them to be held by his hands, or mount onto two ports on the rear vehicle sides, as well as allowing the lance to additionally be used as a pressure-fired missile launcher.
This silver-chromed redeco of the Leader-class Optimus Prime figure first saw the light of day as a prize in a TV Magazine mail-in, offered alongside a gold chrome version of the same toy (see above). Both figures were later made available again as prizes in a second contest in the September 2005 issue of TV Magazine, together with "Galaxy Convoy Custom Color Version" (see below). Despite being offered in equal quantities in these contests, this silver version is apparently much harder to come by.
This Japanese-exclusive black-and-gold redeco of First Edition Voyager Class Optimus Prime was available exclusively at the fourteen stores taking part in the Cybertron Satellite promotion. It depicts Prime coated in an alloy reverse-engineered by Ratchet from MECH equipment that protects Optimus against Dark Energon and other techno-biological hazards.
In the United States, Prime was only available in a special two-pack with a similarly unique Classics Megatron toy, and the specially-produced "The Ultimate Battle" DVD (which is, inappropriately enough, entirely about the Unicron Trilogy). The two-pack (including the DVD) was also available as a Walmart exclusive "Bonus Value" version with two randomly selected members of the Cybertron Giant Planet Mini-Con Team, in the combinations Overcast/Longarm, Overcast/Deepdive and Deepdive/Longarm. International markets, including European countries, saw the two-pack in a considerably smaller, differently-shaped box that was lacking the DVD case (the DVD was instead made available separately). In addition, Mexico, Singapore and some European countries such as the Netherlands and Hungary also received the two figures on individual cardbacks. For the United States market, the two-pack was rebranded and re-released in 2003 Universe-branded packaging later in 2007, available from Dollar General, Big Lots and KB Toys, and again in 2010 Transformers-branded packaging in 2011, this time available from Dollar General and Big Bad Toy Store.
 • Optimus Prime  • Rodimus  • Ultra Magnus  • Alpha Trion  • Arcee  • Blaster  • Blurr  • Brawn/X-Brawn  • Bulkhead  • Bumblebee/Goldbug  • Cliffjumper  • Elita One  • Hoist  • Hot Shot  • Hound  • Ironhide  • Jazz  • Jetfire  • Kup  • Metroplex  • Mirage  • Omega Supreme  • Perceptor  • Powerglide  • Primus  • Prowl  • Ratchet  • Red Alert  • Sandstorm  • Smokescreen  • Seaspray  • Sentinel Prime  • Sideswipe  • Springer  • Wheeljack  • Wheelie  • Wreck-Gar
Hero Optimus Prime was the first new-mold Optimus Prime toy in the Generation 2 line. He transforms into a Kenworth truck of unknown model with a flatbed trailer. The truck and trailer form his robot mode, but cannot disconnect. His primary gimmick is an air-powered missile launcher that uses an air bellows attached by hose to launch his large, hollow, soft-rubber-tipped missiles. The bellows and missiles attach to his back in robot mode. His rifle plugs into the launcher's main body in truck mode.
Fire Blast Optimus Prime is a redeco of the previously released Power Hook Optimus Prime fast action battler. The color scheme is loosely based upon Generation One Rodimus Prime, explained rather oddly in the card bio as being the camouflage Optimus took while hunting Decepticons on Mars post-movie. ...Because there are so many longnose cabs driving around Mars. Yeah.
Optimus took the mantle of leadership as the civil war against the Decepticons erupted, and would remain in that position for the next nine million years. Ariel was rebuilt into Elita One, the commander of the Autobot resistance on Cybertron. The fate of Dion is left unrevealed. It has been speculated by fans that Dion might have become Ironhide or Ultra Magnus just as Orion and Ariel became Optimus and Elita, but this remains fan speculation only, and, his close friendship with Optimus notwithstanding, there is no evidence to support the idea.
Though Prime's ultimate fate is unknown, in a story entitled "The Last Days of Optimus Prime", also from Transforce, Prime laments the new Transformers age without war and passes on to a Transformers afterlife, referred to as "J'nwan". The story is vague, however, and may be a metaphor for Prime rejoining the Matrix, as his time had come. In this realm, he was approached by the Predacon Sandstorm, who tried to plead for the help of Prime and the other legendary Transformers in dealing with a Unicron/Predacon hybrid named Shokaract. Prime refused, but later led a group of Transformers, including Megatron, Grimlock, and Soundwave), to distract the creature while Primus dealt the final blow.
After the successful Armada toy line, Hasbro/Takara introduced Transformers: Energon. The accompanying television series program was a direct continuation of the events of Transformers: Armada and featured many of the same characters in new forms. This was reflected in the toy line, as characters such as Hot Shot, Jetfire, Optimus Prime and Megatron were all released with entirely new molds.
A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.
This version of Ultimate Class Beast Hunter Optimus Prime is exclusive to Cybertron Con 2013. While Prime itself is unchanged, he has been packaged in the box with his backpack plugged into his back, allowing the cannons to rotate when his spiky stomach-fenders are pushed down. The box itself also has slightly different text and graphical layouts, is encased in a large, slip-on outer covering, and features a designated number as part of the Thrilling 30 line.
Like many other modern toys, Optimus was designed with an alternate head sculpt (based on the mouthplate-less face as seen on the show) intended for a later retool, which was gang-molded with the original head. At least one specimen sporting the mouthplate-less head has been found at retail, although since this occurrence has seemingly been limited to an isolated incident, it can be assumed to be a manufacturing error rather than a genuine variant.[6] The mouthplate-less head sculpt was eventually used officially for a later-wave redeco, Nightwatch Optimus Prime (see below).
Optimus Prime has fictionally shown a dislike of certain kinds of music and dance. For the Marvel Comics continuity, the letters page for issue 324 mentions he hates the music of Mötley Crüe. In the cartoon continuity, "Blaster Blues" and "Quest for Survival" have Optimus react noticeably more passive-aggressively to Blaster's choice of music than the other Autobots. And in the Dreamwave Generation One continuity, Hardwired features an uncalled for negative remark about Jazz's dance skills.

Optimus Prime was one of three Transformers characters immortalized in Gummy Candy form by the Frankford Candy & Chocolate Company. Released during the time when Classics had just replaced Cybertron on the toy shelves, Prime's candy depicts him in his Cybertron body, alongside Generation 1 Bumblebee and a kooky Cybertron/Classics Megatron cross-breed. The candies were all sold individually in blister bubbles.

A Leader class toy that transforms from fire truck to robot. The front end of the fire truck can form a robot resembling Generation 1 Prime, while the rear section can form a battle station or combine with him to form Super Fire Convoy. The rear section has an extending ladder with retractable water cannons and missile launchers. This battery-operated toy features siren sounds and voice samples of Fire Convoy (saying the lines, "Fire!" and "Kyoudai Gattai! Super Fire Convoy!").[41] Fire Convoy can combine with God Magnus (sold separately) to form God Fire Convoy.[42] This toy was designed by Takara's Hisashi Yuki.[43]
A redeco of the sword-wielding version of Battle Masters Optimus Prime, Silver Knight Optimus Prime is a non-transforming "Rock 'Em Sock 'Em Robots"-like toy with arms that punch through the use of levers in his legs. He can also be placed on the included controller handle, allowing the punches to be activated with a pair of triggers. Optimus Prime was only available in a Target-exclusive two-pack with Grimlock.
Part of the sixth wave of the 2010 Transformers toyline, this Optimus Prime is an all-new Deluxe class mold based on the original Generation 2 Laser Optimus Prime toy (see above). Transforming into a racing truck, he has some influences from the live-action movie Optimus Prime, including the more defined flames on his hood, athletic robot mode proportions and a more aggressive-looking translucent orange sword that can be held with both hands for maximum extreme chopitude. Optimus Prime features extensive use of translucent plastic in his arms, head and upper torso for a light-piping effect. Optimus also has a (non-detachable) matrix gimmick in robot mode that is formed by a relief pattern on the inside of the cab's side windows and is visible through the windshield/chest in robot mode. Like the Legends toy, he's part of "Reveal the Shield" and features a rubsign, this time on the roof. He is also very articulated and poseable, even featuring ankles and wrists that are both ball-jointed and hinged.
Another redeco of Deluxe-Class Dark of the Moon Prime, this release uses a darker grey, a less magenta-y red, and less gold on the front end. Included is the trailer originally available with the Chronicle release. The trailer holds up to seven MechTech or similar 5mm peg accessories. Four holes are located on the top-front end of the trailer, with another three inside. The door also folds down to become a ramp, and the inside of the trailer is big enough for several Legion or Commander Cyberverse toys, or one smaller-end Deluxe figure. Two C joint bars also run along the bottom of both sides.

In "The Elite Guard", the Autobot Elite Guard, composed of Ultra Magnus, Jazz, and Sentinel Prime, arrive on Earth to reclaim the Allspark. They don't believe Optimus' story about the Decepticons and Sentinel Prime wishes to have him court-martialled. When a fragment of the Allspark causes a production line to go haywire, Optimus finally stands up to Sentinel, retrieving the fragment, and earning praise from Ultra Magnus.

There is another factor that comes with the sticker shock. As I showed before, LEGO has had $100+ sets for a while. However, only recently have they produced sets even more pricy than that. When we were kids, the $100 set was the pinnacle of LEGO. It was the set we all aspired to own. It was the set we all went straight to at the store. Of course we rarely ended up with that set, but that was our dream.
The main Prime line in Japan, while mostly using the same molds, was quite a bit different from the Hasbro version. Hoping to snag a slightly-older market, the toys were given a bit of "model kit" vibe. Paint operations were reduced and replaced with old-fashioned sticker sheets, so you had to customize/complete the toy itself... and then there was the blatantly model-kit Arms Microns packed in with every toy.

A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.
When animating the scene in which Primal removes Prime's spark, Mainframe's animators consulted The Transformers: The Movie for reference on the interior of Prime's chest. Not realizing the importance of the Matrix of Leadership, they rendered it as a container for Prime's spark. Beast Wars writers Larry DiTillio and Bob Forward have since claimed that in their view, Prime had not received the Matrix from Alpha Trion at this point, but a later comic produced for Botcon indicated that the Matrix was in fact stored in a secondary compartment, hidden behind Prime's spark. In this particular comic, the alien Vok used the Matrix, the Transmetal Driver, and a control suit once piloted by the Predacon Quickstrike to create Primal Prime.
Optimus Prime started life as Optronix (Orion to his friends), Hardwired a data archivist at the Vaults. After taking note of a battle in which the Autobot leader Sentinel Prime had been defeated by Megatron, he was summoned to the Council of Ancients and informed that the Matrix had chosen him to be the next leader of the Autobots. He received the Matrix of Leadership shortly thereafter, gaining a powerful new body in the process. After dispatching a Decepticon assassination squad sent to, well, assassinate him, he ordered the Autobots to prepare to evacuate Cybertron, intending to leave the Decepticons to their own devices. The War Within #1
The percentage in the title is not a turn of phrase nor something inferred in any way, it comes from a quote by Bumblebee movie producer Lorenzo Di Bonventura. Whether Bumblebee is a prequel or reboot (or anything in between) has been a hot topic for fans , especially those who want to distance themselves as much as possible from the previous films made by Michael Bay. These debates have reached Bonaventura who sat down with Metro and explained why to him, the Bumblebee film was 100% a prequel - Read More
The original Hasbro stock photos depict him as having red paint operations on his kneecaps and the sunken ridges around his blue abs that the final product lacks. The photos on the cardback show him with a red Autobot symbol on his truck door and blue plastic instead of grey for the piece just in front of his rear tires. The back photo also depicts his side windows as being the same translucent orange as the front ones, when they are, in reality, a garish solid orange.
Star Convoy was reissued by Takara in 2005, with some notable alterations to his deco: his white plastic was replaced with metallic silver, and the yellow star on his chest was chromed golden. Star Convoy himself retained some of his original decals but most notably his "simulated head lights" and "wind shield panels" were stamp graphed on him, similarly, Hot Rod's were replaced with the same stamp graphing applications. Additionally, where the original toy had been packaged in robot mode in a tall box decorated with the standard Japanese package art of the time, the reissue was packaged in vehicle mode, in a long, wide box more reminiscent of the original Generation 1 toys.
×