Timelines Rodimus is a BotCon 2008 exclusive recolor of Classic Rodimus in black that is based on Black Rodimus. An evil alternate version of the Generation 1 character, according to the comic writers his personality is based on Vinnie Barbarino from the TV series Welcome Back, Kotter, using variants of Vinnie's famous put-downs. His new appearance has inspiration from the facial hair of parallel universe Mister Spock from the Star Trek episode "Mirror, Mirror".

Prime is loaded with a ridiculous number of features and accessories. The robot itself is highly poseable, and both the smokestacks on Prime's shoulders and the fuel tanks on his legs can be rotated forward to act as guns, even featuring sculpted detail to this effect. As ever, he comes with a trailer that opens up into his crazy-detailed Combat Deck, featuring more action features than ever before. In trailer mode alone, it features a flip-down support stand so it can stand alone, a spring-loaded pop-out ramp instead of a fold-down one, and when the trailer is split for transformation, the traditional support legs underneath automatically swing out into place. The trailer houses most of Prime's accessories, including his ion blaster (with a moveable ammo clip to allow for multiple poses) and energon-axe, as well as his classic gas pump accessory, now with a poseable wire instead of a rubber hose. Two fold-out compartments provide storage space for six of Prime's interchangeable fists, while the other two remain attached the robot: two clenched, two open, a pointing right fist, a tilted left fist (for holding the ion blaster's ammo clip), and two fists with slots to grip the miniscule Matrix of Leadership that fits in a tiny chamber in Prime's chest. The Combat Deck's artillery robot features two flip-out handles that Prime can grip as if aiming the drone's guns, and Roller is also included, with three different 3mm ports to hold Prime's gun and gas pump. Lastly, Prime comes with a rocket pack like those used by the Autobots in such Generation 1 cartoon episodes as "Dinobot Island", and a stand shaped like the Autobot insignia that allows him to be displayed in mid-air, as if in flight. The rocket pack also has 3mm ports for Prime's weapons, and stores on the front of the trailer in vehicle mode.


Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such.[50] Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.
When Bumblebee, Hound and Spike brought a badly-damaged Starscream back to the Ark, Optimus struggled with the ethical implications of allowing Wheeljack and Ratchet to mess with the Decepticon's logic circuits, but gave them the go ahead. Starscream proved to be amnesic, and Optimus was able to take the opportunity to help him as much as possible, even physically preventing Megatron from retrieving his former lieutenant when Starscream opted to stay with the Autobots. Though Starscream left as soon as he regained his memory, Prime reflected that they'd learned that maybe it was possible to reason with a Decepticon. Redemption Center
Voyager figures all feature a spring-loaded MechTech-style transforming weapon, partially constructed from translucent plastic, which lights up via LED when the weapon is deployed. The figures themselves also feature translucent plastic, so the moving LED creates the image of energon power "flowing" from the character's bodies into their weapons. This worked better in theory than in practice. Internally, these figures were referred to by Hasbro as "Powerizers".
He made it out of the building and ran into the real Sunstreaker, who blasted the 2 clones following Hot Rod. Sunstreaker ignored Hot Rod's warning about Scorponok's army and stormed into the building so Hot Rod painfully wired himself to send a distress signal. When Sunstreaker's real head was later disabled by Hunter, the Headmaster clones shut down, which Hot Rod explained to Grimlock. The group was surprised by the arrival of Shockwave, but Ultra Magnus had heard Hot Rod's distress call and was on his way to Earth. After Scorponok knocked out Sludge and Grimlock tended to him, the remaining Dynobots offered Hot Rod a lift aboard the Monsterbots' ship. He refused though, and made it back into Machination HQ to take care of something "personal". He eventually found Scorponok's real head. Hunter also showed up and let Hot Rod know how to disable it, but before he could do so, Scorponok grabbed him. Before Scorponok could crush Hot Rod's head, the Dynobots showed up and began to battle Scorponok. Hot Rod told Swoop which wires to sever, and he did just that, reducing Scorponok to a catatonic state. Ultra Magnus arrived took everyone back aboard his ship, which later docked with the Ark-32. Within 3 days, Hot Rod was fully repaired, with a new body form design.

If Optimus decided to send the lead team to attack the Decepticon headquarters, the team managed to infiltrate the Decepticon headquarters by using Beachcomber’s knowledge of the secret doors’ location, and Brawn’s strength to keep the doors opened. The Autobots then stormed the fortress, and Optimus maimed Megatron himself with a shot of his rifle. He then grappled the Decepticon leader, and forced him to lead himself, Inferno and Beachcomber to the Decepticons’ lab. There, the Autobots disabled and destroyed the Destruction Beam device, captured Megatron, and left many Decepticons permanently maimed. Though they later traded Megatron back to the Decepticons for the safe relief of the Autobots captured in Center City, the Autobots were ultimately victorious that day.
One peaceful day, Optimus decided it was too quiet, and sent Bumblebee and Mirage to find out what the Decepticons were up to. Sure enough, the Decepticons were looking for a factory, so Optimus had Mirage create a holographic factory as a trick, and ambushed the Decepticons. Optimus himself hurled Megatron into orbit. Decepticon Patrol Optimus and his Autobots rescued Sparkplug and Buster Witwicky when the pair were captured by Decepticons, and afterwards Prime was amazed when Sparkplug repaired Wheeljack and Prowl. After Bumblebee and Hound discovered that the Decepticons were attacking Hoover Dam, Optimus and his team defeated them. The Deadly Fuel Shortage

the one the left was a design that i hated from the start. just doesnt look like what a Transformer is supposed be. the one on the right is almost there but not quite. a very welcoming design though. its what Prime should have looked like from the start. To say it is too 80s, well the first film should have taken place in the 80s, not present day. The Transformers are icons of the 80s. You make Cybertron in the future tense all futuristic and alien-ish and whatnot, but on earth you make it in the 80s.

Optimus once considered having the unruly Dinobots shut down before they could accidentally cause damage, but they proved their worth during a sudden Decepticon attack. S.O.S. Dinobots When the Insecticons gained enough power that they'd be able to overrun Earth in seven days, Optimus Prime was forced to negotiate an alliance with the Decepticons in order to defeat them. Harvest of the Insecticons Following the disappearance of Grimlock and Swoop, Optimus attempted to stop the other three Dinobots from attacking the Decepticon base, and was mauled for his trouble. The distraction at least allowed Wheeljack to take a scan of the rogue Dinobots. Day of the Dinobots - Part 1
The largest Action Master set, this incarnation of Optimus Prime is a non-transforming action figure which comes with the "Armored Convoy", a large, heavily armed tractor trailer. The cab of the truck transforms into a small jet that can seat one Action Master figure, while the trailer itself converts into a larger battle station with turrets that several Action Masters can man. The sculpt of the Prime figure itself is closely based on his character model, albeit with a coloration that seems to have been based at least partially on the small robot form of his Powermaster body.
Came with the Mini-Con Sparkplug. Could combine with Armada Jetfire (and its repaints) and/or Armada Overload (and its repaints). The trailer could convert into a base for Mini-Cons. In Japan a gold chrome edition of this toy was released as a Lucky Draw special. With its trailer the vehicle mode of this toy bears a great resemblance to G1 Star Convoy. According to the Armada video game Armada Optimus Prime is supposed to be 22 feet 10 inches tall (696 cm tall) and the toy is 17.5 cm tall. So that's a scale of 1:40.[55]
In "Mission Accomplished", Optimus is pressured by Sentinel to tell Ultra Magnus that his story about the Decepticons is untrue, but he refuses. Meanwhile, the on-board computer plots a train infused with a shard of the Allspark. When Ultra Magnus and Jazz set off there, Optimus suspects that the Decepticons are luring them into an ambush and rushes to their help, though Sentinel Prime tries to detain him. At first, Ultra Magnus doesn't believe him, but a short time later, Optimus is proven right as Starscream falls from the sky after being blasted by Megatron, much to Sentinel Prime's astonishment and fright. Starscream turns out to be alive, inflicting injury on Ultra Magnus. Optimus takes the affair into his own hands momentarily and, with Sentinel's aid, manages to apprehend the Decepticon. While Sentinel Prime deflects Starscream's shots with his power-shield, Optimus succeeds in taking Starscream by surprise and handcuffing him. When the shackled Starscream is delivered to the Elite Guard spaceship, Ultra Magnus admits Optimus Prime was right and allows him to stay on Earth in order to seek out the other fragments of the Allspark.
A highly CG-accurate sculpt of Optimus Prime's head with a built in voice-changer. It also has several sound effects and quotes from the movie. The voice-changer has three settings, giving more accurate alteration of the user's voice (though this is still debatable; most voice changing technology is pretty crummy, at least in toys). Much like the Ultimate Bumblebee figure, this toy will hate your wallet too. While it only costs 30 bucks, if it's anything like another Hasbro voice changer, it will suck batteries up like they were some kind of square candy holder.
He next appears in Transformers: Energon, the only time during the Unicorn Trilogy where Prime is not the main protagonist. In Energon, set ten years after Armada, he is no longer able to combine with his trailer. Instead, he has been gifted with the Spark of Combination by Primus, allowing him to combine with the quartet of vehicular drones in his trailer. Fire One, Copter Two, Digger Three, and Submarine Four, can each form either an arm or a leg when they combine with Prime, creating his super mode. Later, Prime gained the ability to combine with fellow Autobots Wing Saber and Omega Supreme, the latter case creating Optimus Supreme.
Packed with Ravage, Optimus Prime is one of the first figures in the Transformers segment of the Heroes franchise. As with all Heroes figures, Optimus Prime is a simple, yet well-detailed two-inch tall figurine with exaggerated, cartoony proportions. He is sculpted holding his Ion Blaster rifle in his right fist and his left arm in a pointing pose. He is also love, and demands that you pull his Finger of Doom.
In his first appearance in the series, Optimus looks similar to the original G1 Optimus Prime until he copies himself with a semi-truck and his design in robot mode changes to the image shown here. Soon after, he retrieves his Mini-Con partner, Sparkplug. The cab of his truck mode detaches to form Optimus himself, while the trailer transforms into a battle station mode operable by Optimus and several Mini-Cons. Optimus can also combine with his base to form a "Super Mode" robot that, when combined with Sparkplug, can fire a series of powerful lasers. Additionally, Optimus can combine with Jetfire and/or Overload in his Super Mode for additional power.[49]
Super class Energon Optimus Prime transforms into a Cybertronic short-nosed truck cab. A switch on his back offers four selectable sound effects, each one corresponding to one member of the Prime Force, the four drone vehicles contained within Prime's parallelogram-shaped trailer. A tiny, slightly recessed button above the switch activates the sounds. When Prime transforms to robot mode, the trailer stands upright to become a launch base of sorts for the Prime Force, with three of the trailer's four storage compartments featuring launching mechanisms that propel the vehicles into action. The Prime Force consists of Fire-1, a fire truck with an extending ladder and rotating turret; Copter-2, a helicopter with spinning rotors; Digger-3, a drill tank with a gear-wheel-activated spinning drill; and Submarine-4, a submarine with opening capture claws beneath its bow. The four interchangeable drones can combine with Prime to create his Super Mode; any drone is capable of forming any limb. When in Super Mode, Prime's chest panels are opened, in turn pressing a button on his side that creates more electronic sounds and lights up a red LED in his chest, representing the Spark of Combination.
As with other Dark of the Moon Activators toys, this Optimus Prime (released under the Robo Power subline) is a very simple one-step transformation toy. You simply slam him down on the big blue button on the back end of his truck mode and he transforms thanks to spring-loaded mechanisms. To transform him back, just slam him down again on the same blue button.
Based on his appearance in War for Cybertron, Generations Optimus Prime transforms from a red, blue, and silver robot into an "armored truck mode." He comes with a hand-held rifle that is held via either of its two 5mm posts, and can fold up to store in either mode. He features additional 5mm ports on his forearms, roof, and front-wheel panels. Optimus has a stylized sculpted Autobot insignia on his back, as seen in the game, but it is obscured by kibble.
The voice actor drama was written for OFTCC 2004 by Simon Furman, set after the events in the comics. Among those taken from their world via teleportation beam by Unicron and his Decepticon minions were Spy Changers Optimus Prime, Prowl, Ultra Magnus, and Ironhide. The Autobot forces opposing Unicron attempted to deflect a beam, leaving them all trapped on an uninhabited ice-world. The Autobot forces teamed up to overcome the Decepticons led by Reptilion. The Autobots were then, presumably, returned to their own worlds.
Walmart have uploaded a very nice commercial via their YouTube Channel that we are sure will please your optics. What is it about? This video features several famous and iconic cars like KITT from “Knight Rider”, Ecto-1 from “Ghostbusters”, Lightning McQueen from “Cars”, the Mystery Machine from “Scooby Doo” and even Fred Flintstone’s footmobile. As some of you should expect, our small yellow hero is present here in his Bumblebee Movie VW Beetle design, and with an impressive entrance emulating Ironhide’s jump from the 2007 live action movie.
The original Ultra Magnus figure has been reissued and redecoed several times down the years, and this article strives to list each edition of the figure under its own heading. The first alteration to Magnus, however, was a running change made while he was still on shelves: Originally, his tires were made of rubber and he sported paint on both his small and large robot heads, but this version was soon replaced with one featuring plastic tires and no paint on either head. In addition, the clear yellow plastic that formed his windows was removed from the cab, leaving just holes instead; and his thighs and fuel tanks were left white, as opposed to the vacuum metalized chrome ones of the original release.
French die-cast model producers Majorette teamed with Kabaya to produce the Transformers Mini Car Collection, a line of Armada-themed die-cast vehicles, all of which were redecos of pre-existing Majorette toys. Prime was a redeco of Majorette toy #256—a long-nosed tow truck—in his traditional red and blue, now bearing the Autobot insignia, the Micron Legend logo, and an image of the Autobot leader on its hood. The toy came with a pack of gum.
In the event that Windcharger successfully turned the Decepticons’ forcefield off, reinforcements burst into the base just as Megatron was strike Optimus from behind. A wayward shot from Megatron then revealed the location of the gravity gun to the Autobots. Optimus ordered his troops to charge the weapon. Hook caught Optimus in the gravity gun’s sights, and sent the Autobot leader floating upwards.

Two custom-made pieces (presented in robot and vehicle mode) by the Hasbro Transformers team as the grand prize for G4TV and Jumpcut's contest for fans to remix selected Transformers clips. Won by TFW2005.com member James Zahn, this one-of-a-kind (well, two-of-a-kind) piece is an almost fully vacuum-metallized Leader-class Optimus Prime in red, silver and blue (based heavily upon Generation 1 Optimus Prime), presented with a custom display base with an embossed silver Autobot insignia and a perspex display case.
Like the First Edition figure, Battle Command Optimus Prime's truck kibble can be detached from the robot mode figure to form his separate vehicle mode on its own, but there is one single sacrifice is needed to be made, so brace yourselves: you need to actually trim off the wires that activates it's lights & sound gimmick in order to separate the kibble from the robot, so good luck if you wanna risk your hard-earned cash for that.

Takara's version of the figure was released in their markets slightly earlier, as the first of what would come to be several installments in their Masterpiece line. In addition to coming with a cardboard trailer that the buyer could assemble to "complete" Prime's truck mode, Takara's release differed from Hasbro's by featuring longer smokestacks (kept short on the Hasbro version for safety reasons, but incorrectly shown to be long in the stock photography shown at right), and lacking the black scorch-marked "battle damage" paint applications Hasbro included on the figure's shoulders, wrists and abdomen.

This set's Optimusses are based on the Prime incarnation. The larger Optimus is a smaller, simpler build than the first big kit, and makes use of ball-and-socket parts for increased articulation. It also carries a spring-loaded missile launcher. The Optimus Kreon's tampographs are based directly on the Prime cartoon model, though he carries an energon axe akin to the one from the War for Cybertron games. He also has a clear-blue extra "energon" torso piece.
The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[19] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original transformers toy line.
Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.
If Optimus led his troops back to the Decepticons’ poison lab, the convoy happened upon the Decepticons hauling barrels of poison out of the poison lab. Windcharger and Ironhide suggested two different plans to Optimus: Windcharger wanted to use his magnetic powers to cause a confusion, while Ironhide wanted to simply go in for a full frontal assault.
Like the previous Prime, it is loaded with features, though it ditches the first movie's Automorphing for the new Mech Alive gimmick. When a grey tab on his midriff is pressed, Prime's entire pectoral region "flexes", lights in his chest and eyes glow, and he declares "I am Optimus Prime" in Peter Cullen's voice. For the European release of the figure, to get past the language barrier, the Cullen sound clip is abbreviated to just "Optimus Prime"; in some regions, including Quebec and the UK (but only after a month or two), both versions were made available. A transformation sound effect activates when his torso is transformed, and once Prime is in truck mode, an almost unnoticeable button (a small square located beside the screw for the battery compartment, undocumented in his instructions) is revealed, which activates engine-idling noises.
The first Generation 2 Optimus Prime toy was largely identical in sculpt to the original release. However, his trailer was cast in black plastic, with the original blue and silver striped sticker replaced with a red and silver one that had "Optimus" in large block letters on it. The trailer also featured a soundbox attachment with a sculpted Autobot symbol on the front. The soundbox could activate a truck engine noise, a laser gun sound effect and a (badly) garbled voice that said "I am Optimus Prime!". This soundbox could also be attached onto Optimus Prime's back and be used as a sort of backpack.
The Universe incarnation of Generation One Optimus Prime is a redeco of the Robots in Disguise Scourge's Spychanger toy, a smaller, simplified version of the original mold. He replaces most of the black plastic with predominantly red and blue, with silver for detailing, with an overall deco making him resemble the original Optimus Prime. Like most Spychangers, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly.
Optimus Prime can also combine with Leader-class Jetfire to form Jetpower Optimus Prime by slightly transforming his backpack and feet. Sadly, this takes away from his leg articulation, because otherwise he could never support the massive backpack he has in this mode. However, fans have created alternate configurations that increase leg articulation and movie-accuracy.

The figure's transformation scheme is based on the original G1 figure, the only differences being that the fists are not removed but become the headlights, and instead of flipping backwards inside the chest, Diablock Convoy's noggin flips forwards with the aid of opening chest windows. A "laser rifle" in the shape of his ion cannon can be built from black bricks, and stickers bearing the Autobot faction symbol can be placed on his shoulders, although this is not recommended as it is designed to permanently stick to multiple tiles which dislodge easily and may damage the sticker.


For the Generation 2 toy line, the original Optimus Prime toy was altered somewhat and an electronic sound maker was added.[24] Later Generation 2 toys of Optimus were completely new designs, such as Combat Hero Optimus Prime, Laser Optimus Prime, and Gobot Optimus Prime, who could become a red Lamborghini car. In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film.[25] In 2006, Hasbro introduced Alternators Optimus Prime, which turned into a licensed 1:24 scale model Dodge Ram SRT-10.[26] In 2011, Takara Tomy released MP-10 Convoy, a smaller, more show-accurate version of the Masterpiece Optimus Prime figure.[27]

Part of the first wave of Prime Series 2 Cyberverse Commander Class toys, Optimus Prime is a smaller-scale toy, and features translucent plastic for his torso so that the toy can be illuminated using the electronic lights featured in the larger playsets. He comes with two translucent "battle cannon" weapons which feature multiple 3mm posts and ports, allowing them to be held by his hands, or store/mount onto numerous ports on his person. Additionally, he features a 5mm port for a trailer hitch.


Available exclusively from Japanese clothing company A Bathing Ape in July 2011, concurrently with a range of exclusive Transformers t-shirts, "Convoy Reissue BAPE Ver." (コンボイ復刻版 BAPE® Ver.) is a redeco of the original Optimus Prime toy sporting a unique new green color scheme, along with a tan trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese Optimus Prime packaging.
Nonetheless, I remain a big fan of Lego and although I think they have somewhat moved away from their roots with the excess of licensed products (and the earlier licensed products were, in my opinion, not very good because they contained too many specialized non-generic pieces that weren’t useful for generic building. But that situation is improved and in particular we have found the Star Wars sets to be of most value for generic building, because they generally have very few really specialized pieces (although to be fair the sets are most useful for building other spaceships, etc).
JETWING OPTIMUS PRIME Black Ver. is a black, teal, and chrome redeco of Jetwing Optimus Prime exclusive to the Asian market. He appears to have been based on the cancelled TakaraTomy contest prize Jetwing Optimus Prime Black Version (see above), with a few color alterations here and there, plus the obvious addition of chrome. It was originally solicited by online retailers as the far goofier-sounding "Dark Nightwatch Jetwing Optimus Prime".
Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
This redeco of the Dark of the Moon Voyager Class Optimus Prime figure features a really unusual deco pattern consisting of red transparent tires, the vehicle front grill and fuel tanks (the fenders remained opaque red due to unpaintable plastic). Some of his parts like the vehicle front hood and the truck roof features a pattern similar to the ones used for the Tech Specs in the Generation 1 toys. He features a new sword and shield accessory, which can be used to decode the patterns.

Available exclusively from Japanese clothing company A Bathing Ape in March 2013, "Convoy Reissue BAPE VERSION RED CAMO" (コンボイ復刻版 BAPE® VERSION RED CAMO) is a redeco of the original Optimus Prime toy sporting a unique new red color scheme, along with a red trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese packaging.

×