The 1992 and 1993 European and Canadian releases make up what is often called "Generation 1.5", much to the annoyance of many UK fans. These toys are similar in design to the Generation 2 Transformers, having lightpipe eyes, and pastel colors. The 1993 European figures used the G2 faction symbols which Hasbro UK designed because their licence on the G1 symbols had expired. The 1993 figures were repackaged for European G2 release in 1994, and three subgroup molds got used in the US G2 line.
Another redeco of Deluxe-Class Dark of the Moon Prime, this release uses a darker grey, a less magenta-y red, and less gold on the front end. Included is the trailer originally available with the Chronicle release. The trailer holds up to seven MechTech or similar 5mm peg accessories. Four holes are located on the top-front end of the trailer, with another three inside. The door also folds down to become a ramp, and the inside of the trailer is big enough for several Legion or Commander Cyberverse toys, or one smaller-end Deluxe figure. Two C joint bars also run along the bottom of both sides.
Hot Rod has a youthful attitude, and serves as an older brother figure to Daniel Witwicky, son of Autobot ally Spike Witwicky. He has a sort of mentor-student relationship with the veteran Autobot Kup. He was also good friends with Springer and Arcee. Later in life, he temporarily bears the Autobot Matrix of Leadership and becomes Rodimus Prime (Rodimus Convoy in Japan), and new leader of the Autobots.
If Cosmos radioed his findings to Optimus immediately, Optimus’s convoy moved in to investigate a nearby Decepticon base. En route, the Autobots passed near a human town, but began floating in mid-air before being able to reach it. Optimus quickly deduced that this phenomenon was caused by an anti-gravity beam, courtesy of the Decepticons. Worried about the nearby humans also being affected by the lapse in gravity, Optimus had to decide whether he would order his troops to stop and help the townspeople, or to continue forward and attack the Decepticon base.
As a result of striving for vehicle realism and painstaking accuracy to his visual portrayal in the live-action films, this Optimus Prime ends up being ridiculously complex. Transforming him back into a truck is probably more complicated than shown in the movie and can only be considered torture. Very unfortunately, the instructions for this toy are infamous for being amazingly vague and unclear in their visual depiction of the transformation steps, making transformation even harder. Also, let us not forget that, upon transforming him back to robot mode, he will declare his identity over and over and over and over and over until you're finished.
Part of the new Adventure Shokugan series, this Optimus Prime is a transformable snap-fit kit molded in red, blue, and yellow plastic with detailing from stickers. The kit's transformation engineering is borrowed from the Warrior class figure. But unlike the said toy, the Axe must be pegged onto Prime's legs before transforming, and his shoulders are molded on his front truck halves/shoulders not being flipped down. Also, the stickers are used to cover the molded cavity on the front shoulders. As with Fixit & Underbite, Optimus Prime is fully transformable.

After his attack on Optimus Prime, Megatron was thrown out of the Ark when Blackarachnia activated the ship's defense systems. However, he was not thrown far enough and the Predacon managed to reenter the Ark and blast the Autobot leader, decisively erasing the Maximals from the timeline. A Change to the Agenda This had the effect of producing a wildly different timeline.
The San Diego Comic-Con 2017 exclusive Optimus Prime figure is another redeco of the Premier Edition figure, which aims for a more movie accurate look than the original by still sharing the same paint masks, but replacing the chest's deco with flames and adding extra paint applications on the legs, arms, chest, head, tire rims, both sides of the engine compartment, and the sword and shield... but for some reason still sports the movie-inaccurate blue 'collar', as well as the smaller, less accurate vehicle flame tampographs instead of the more movie-accurate ones used on Dark Optimus Prime. His Autobot insignia is also moved on the upper back section of the air dam. He is packaged in a stylish, display-case-like-box similar to later Transformers: Alternators releases and the Hasbro Toy Shop/SDCC 2011 exclusive figure.
His original trailer is not included with the set; instead, he comes with a new deluxe-scaled trailer, not available with any other figure, based on the one towed by Prime in Dark of the Moon. The trailer is compatible with both figures, and sports 5mm post-holes that will hold (among many other things) G1 Prime's laser rifle and the MechTech weapon Movie Prime is armed with.

In search of new energy sources, Optimus led a team to central South America. When they spotted Mount Sheelah, their two human friends John and Tim Gordon explained volcanoes, and, believing it to be of possible use, the Autobots went to examine it. During a battle with the Decepticons over the volcano, Optimus was convinced by the two humans to retreat, ultimately saving them when Mount Sheelah erupted. Terror of Mount Sheelah After discovering that the Decepticons were kidnapping humans, Optimus sent Bumblebee to scout the Decepticon base. When Bumblebee returned with the Decepticons' global crystal, Optimus was able to use it to blackmail the Decepticons into letting the humans go. Bumblebee to the Rescue
The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.
If Sparkplug suggested that the Autobots not worry about subtlety, the entire squad transformed and began prowling the streets in search of Decepticons. Oblivious to the panic they were causing, Optimus assumed that the Decepticons were spotted nearby when a police officer declared that the city was under siege by giant robots. Unable to restore order in time to halt the Decepticons’ plot, Optimus and the rest of his team were destroyed in the ensuing earthquake.
Something of a shellformer, Convoy Nike Free is colored primarily white and red in his alt mode of a realistic-looking, scaled-down Nike sneaker, complete with (gratuitously long) real fabric shoelaces. In robot mode he incorporates some additional blue and silver in predictable areas and has a somewhat uniquely-shaped yet instantly recognizable G1-inspired head.

Prime's trailer opens up into his Combat Deck, containing the scout drone, Roller. The interior of the Combat Deck features three pegs that can accommodate Prime's laser rifle, fuel pump and nozzle accessories, and seating for two Diaclone drivers. As its central feature, the Combat Deck features a missile-armed repair drone pod mounted upon a boom lift arm (featuring another cockpit for a Diaclone driver), which can also be extended through holes in the trailer's roof and front-end when it is closed. Situated in the base of the boom arm is a spring-loaded launcher that can launch Roller out of the Combat Deck and into action. Roller himself has seating for four Diaclone passengers, and features a port that can accommodate either Prime's rifle or the fuel pump. The interior space of the trailer allows storage room for one standard Autobot car, which can also be shot forward by the launcher.

Compared to the Combiner Wars release of the mold, Convoy features additional paint operations on the thighs, truck bumpers, the details on the inner legs, the gestalt chest halves (which are now painted over due to being molded in grey plastic), and the gestalt torso's lower section. The stomach's deco is also minimized, and the silver paint operations on the lower legs are now replaced with gunmetal while the mute metallic blue is now shiny metallic. When it comes to unpaintable plastic; his leg joints and feet are now blue, while the gestalt skirt flap is now the same grey as the arms. In addition, his flip-up gestalt leg panels and thighs are now molded in black, with the latter being painted in silver with some yellow details.
In Transformers: The Last Knight, he is brother-in-arms with Bumblebee who he fought alongside with to foil the Nazi Party in World War 2. He speaks with a thick French accent due to being stuck in France for so long, much to his own embarrassment. He wields a special gun which can briefly slow down time. He is also the only Transformer who is shown to speak in vehicle mode. [20][21]
Released to conclude the 10th Anniversary of the live-action film series, Masterpiece Movie Series Optimus Prime is a brand new mold that transforms from a 25cm-tall robot (a little taller than MP10 Convoy) resembling how the character appeared in the first live action movie into a Kenworth W900 modified Peterbilt 379, with many of the engineering cues being distinctively based and improved on the ROTF Leader Class mold. His transformation takes a whooping 43 steps, making it one of the most complex Masterpiece figures to date! (Although this pales in comparison to MP-36 Megatron's 107 steps.) .
In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.

A Deluxe sized version of Energon Optimus Prime. Looks like a smaller version of the Leader class toy, without any trailer or drones. Can Powerlinx with other Energon Autobot toys. This toy was a Toys-R-Us store exclusive in the U.S. and was packaged together with a downsized Energon Megatron. In Japan this toy was packaged together with Kicker and a Star Saber accessory.


This Optimus Prime is a minor redeco of the One-Step Changer figure, omitting the paint apps on the knees, the flames on his shoulders, and changing the robot mode chest's deco. Along with his wavemate Bumblebee, Optimus Prime loses his pin on his leg, which is used to activate Stomp & Chomp Grimlock's pop-out weapons and gimmicks. As with the first wave of the Turbo Changers, Optimus features a nearly invisible tampograph on his vehicle front, which can be revealed with Mega Turbo Changer Dragonstorm's UV-powered Cyberfire gimmick.
JETWING OPTIMUS PRIME Black Ver. is a black, teal, and chrome redeco of Jetwing Optimus Prime exclusive to the Asian market. He appears to have been based on the cancelled TakaraTomy contest prize Jetwing Optimus Prime Black Version (see above), with a few color alterations here and there, plus the obvious addition of chrome. It was originally solicited by online retailers as the far goofier-sounding "Dark Nightwatch Jetwing Optimus Prime".
According to the bio printed in the Transformers Collectors Club magazine, Optimus Prime was a member of the Cybertron Dimensional Patrol, but was abducted by Unicron. It is unknown whether he repainted himself yellow before being abducted or if the recoloration was due to the radiation emanating from Unicron, which has a tendency to recolor Cybertronians.

Not depicted in the instructions or stock photos, Roller can attach to Prime in vehicle mode via two tabs on the vehicle front which slot into two corresponding slots on Prime's feet. Another undocumented feature is that the butt of the Ion Blaster can be inserted between the barrels of Roller's weapon mode to form a longer weapon. Also not shown in the instructions but depicted on the stock photo on the card-back is that Prime's shoulderpads can be rotated up; the intended positioning for this is notched, although you can position them at other angles.


I don't have a really good pic and I probably have something more rare in a box somewhere that I can't remember but this is my fav 'rare' Transformer: https://s3.amazonaws.com/tf.images/reduced-image_4474_106.jpg Sorry I don't have a real pic, I am packing up to move but here is a stock pic of TF Prime FE Japanese Convention Exclusive Optimus Prime.
Surely one of the strangest examples of licensed Transformers products, Sports Label Convoy transforms into a shoe. Something of a shellformer, this baffling incarnation of Prime is colored primarily white and red in his alt mode of a realistic-looking (if notably undersized) Nike Free 7.0 sneaker, complete with gratuitously long real fabric shoelaces. In robot mode, he is made instantly recognizable by his incorporation of some additional blue and silver in predictable areas, and a traditionally Prime-styled head. Less traditionally, and somewhat perversely, Prime's feet are sculpted in the likeness of his own sneaker mode, making it seem like he's wearing himself!

In one of his less impressive moments, after running out of ammo during a battle with Deathsaurus, Optimus Prime ordered his fellow Autobots to improvise and hurl everything that wasn't nailed down at their enemy. This included the Blackball, unfortunately. Catching it, Deathsaurus began to fantasize about his inevitable galactic conquest, all the while being pelted with rocks and litter. Frustrated, Deathsaurus accidentally hurled the Blackball back to the Autobots in a fit of rage. Good Job! Deathsaurus!!
Although Cybertron's Energon stocks were destroyed, the Autobots discovered a recording pointing to the Logicon planet Metascan Alpha, which had Energon in abundance. Optimus ordered Hot Rod and Ultra Magnus to take a team each to find the planet. The Autobots discovered they were being spied on by the Decepticon Clones, and Optimus swore that Galvatron could pay. He led a team to the derelict space destroyer which the Decepticons were using for a base and fought their leader one-on-one. As he was about to destroy the Nullification Cannon, Scorponok took a swing at him which connected instead with the Cannon, obliterating it. Optimus was helped away from the destruction by Blurr and Sureshot. The War Against the Destructons, Chapter 1 of 3
For its release in Korea, Hasbro Asia provided a collector coin featuring truck-mode Optimus Prime on one side and "MP-01L" on the other. The coin came mounted on a card featuring lineart of the Autobot leader's head, the stark black design of which could be mistaken for promoting the earlier "Sleep Mode" release. The limited release (and general lack of enthusiasm for the collector coins in Korea) makes this one of the more difficult Masterpiece coins to find.
Available exclusively through e-Hobby, this black and teal repaint of Hybrid Style Convoy features the traditional "Nemesis Prime" color scheme, but represents a version of Optimus Prime himself. In addition to all the original accessories, the toys also includes several more deliciously metatextual goodies, themed around the Generation 2 toy and comics: two new large guns patterned after the new weapons wielded by the Generation 2 Optimus Prime toy, and two additional (blue) Prime heads that can be swapped with the figure's regular noggin, sculpted explicitly in the style of Generation 2 comic artist Derek Yaniger. One head is pristine, the other decorated to match the battle damage seen on the cover of the first Generation 2 issue.
He now comes with a half-translucent gun which lights up and expands MechTech-style when the lever is pulled. Bizarrely, the main section of the weapon is sculpted to resemble Prime's forearm, with the unfolding part being his in-show gun. Additionally, he comes with an opaque sword resembling the Star Saber, which he can wield two-handed. The gun features a peg on its underside and a port on each side, while the sword features a peg and peg-hole on its hilt in addition to its 5mm handle. In robot mode, either accessory can mount on his hands, on either of his shoulders, or be pegged into either of his half-translucent forearms. In vehicle mode, the top of the vehicle mode cab can also fold back to reveal two additional peg holes, and there are three peg holes (including the fifth wheel hitch) on the back section, although the hitch tends to open up and not hold very well.
An undocumented aspect of his transformation is that his gun, which splits in two halves and secrets inside his kibble when transforming (much like Rattrap's) has two handle pegs on opposite sides, so that it can be held either at its far end or halfway along its length. The former position makes the weapon look (charitably) more like his traditional ion blaster—or Ultra Magnus' rifle. Additionally, the gun halves can be plugged together in two different ways, theoretically allowing you to create an infinitely long weapon (or at least one of ridiculous proportions).
Articles to be expanded from December 2011 Articles with invalid date parameter in template All articles to be expanded Articles lacking in-text citations from December 2009 All articles lacking in-text citations 3H Enterprises characters Action Masters Autobots Convoys (Transformers) Devil's Due characters Transformers automobiles Fictional characters introduced in 1984 Fictional commanders Fictional robots Film characters Fun Publications characters Go-Bots Triple Changers IDW Publishing characters Maximals (Transformers) Powermasters Primes (Transformers) Robot superheroes Spy Changers Transformers Alternators Transformers characters in video games Transformers: Energon characters Transformers: Prime characters Dreamwave Productions characters Optimus Prime
A Bic Camera and Joshin Kids' Land exclusive, this redeco is the first release of the Prime: First Edition Deluxe class Optimus Prime figure in Japan, featuring a slightly lighter hue of red (the stock photography provided by TakaraTomy, showed Orion Pax's red plastic features more pink than its original toy, this seems to have been a trick of the lighting or a photoshop), and greyish blue plastic. He features several customer-applied foil stickers, including Decepticon insignias of varying sizes. He comes with a gold vac-metal version of the Arms Micron, R.A., as well as the normal blaster-cannon.
As one of the first Transform Jr toys, this version of Optimus Prime was released under the early name for the series, Transform Gōkin. As a smaller, simplified version of the original Generation 1 Prime figure intended as a low-cost alternative for younger children, Prime features a similar transformation, with a removable head in addition to fists, but lacks rubber tires and translucent windows. As with most other Transform Jr figures, he lacked any of his major accessories, coming only with his rifle and a cardboard replacement for his trailer that had to be assembled by the buyer.
When a two-part race was being held with a massive supply of oil and gasoline as the prize, both the Decepticons and the Autobots badly wanted to win it. Megatron entered the race by hiding himself inside a hollowed-out car and harassed Cliffjumper all throughout the contest. When Prime discovered the car was being driven by his arch foe, he swiftly pulled a telephone pole out from the ground and used it to bash the mortal hell out of the cheating Decepticon. Thanks to Prime's violent intervention, Cliffjumper was able to win the race. Afterward, Optimus Prime celebrated the Minibot's victory with a gargantuan smile as all the Decepticons starved to death. The Great Car Rally
This sculpt was redecoed by Takara into a golden Lucky Draw figure and later released in its original coloration with a trailer as a "Perfect Edition" (see below for both), while Hasbro would later redeco it into their Classics-branded "DVD Edition". The mold was also used to make Masterpiece Ultra Magnus and "Convoy Black Version", representing one of many drones built in Prime's image, rather than Prime himself.

Nearly all the chrome is worn off, the tips of both smokestacks are broken, the fists and guns and voice box are long gone, there's a huge chip of plastic broken off one of the shoulders. I still have the trailer, but it's also broken in a few places. The door is gone. The spring-loaded gimmick doesn't work anymore. The repair drone broke off entirely near one of the joints on the main arm and was thrown away many years ago.

The main build of the set is a massive vehicle based on Optimus's truck cab, capable of seating a single Kreon in the driver's seat. Pushing the trailer-hitch on the back end towards the cab opens up the front grill, revealing a huge spring-loaded rocket launcher with rubber-tipped projectile. The cab can also stow the included stasis pod ussed to lock away the baddies.


Hot Rod then fought in the battle of Autobot City and saved the city for if he had not attacked Megatron, he would have destroyed it. Due to his attempted intervention in the epic battle between the Autobot leader, Optimus Prime and the Decepticon leader, Megatron, Prime was lethally injured. Before he died, the Matrix got passed on to the Autobot Ultra Magnus, whom he referred to as "old friend", despite protestations.
The Autobots United 5 Pack includes another redeco of Voyager Class Evasion Mode Optimus Prime. This release features the faceplated headsculpt and, unlike the rest of the set, which strives for screen-accuracy, features a heavily Generation 1-inspired deco. Deco changes include replacing most of the blue & grey plastic into red, with blue paint applied on it, and his dark grey plastic is now a lighter shade. His Ion Cannon is now painted black to resemble his Generation 1 toy's blaster, color-wise.
The designs for the original 28 figures were made by Kojin Ono, Takashi Matsuda, Hideaki Yoke, Hiroyuki Obara, and Satoshi Koizumi. Hasbro would go on to buy the entire toy line from Takara, giving them sole ownership of the Transformers toy-line, branding rights, and copyrights, while in exchange, Takara was given the rights to produce the toys and the rights to distribute them in the Japanese market.

The first Cybertron Optimus Prime toy transforms into a heavily-armed fire truck of made up origin, topped with two large cannons. The left fires a spring-loaded translucent blue missile, while the right features electronic sound effects and a flashing red LED. The cannons and the sides of the truck fold down to create an unlikely flight mode for the vehicle.


In the animated series, Optimus is able to fire short-range optic blasts, project holographic maps, and deploy hydro-foils, designed by Wheeljack, to traverse bodies of water with ease. In the animated series, Optimus was also given the ability to retract his right hand unit and replace it with a glowing axe.[7] Across the assorted continuities of the original Transformers universe, there have been various interpretations of Optimus Prime. One of Prime's most notable characteristics over all continuities his unswaying commitment to leadership by example. The animated series's version of Optimus Prime is depicted as a straightforward, wise, and upbeat battlefield general. Additionally, the animated series's version of Optimus dislikes rap music, putting him at odds with music-loving characters like Blaster and Jazz. In the Marvel Comics series, in addition to these characteristics, Prime is secretly plagued by self-doubt and a conflicted sense of pacifism that often makes him an extremely reluctant warrior.
Takara's iteration of Combiner Wars Optimus Maximus is sold in a gift set including all five Autobots (minus the Rodimus mold). This version of Convoy has numerous changes in deco to better match his look in the Generation 1 cartoon. Like Unite Warriors Menasor, the set also features some minor improvements to the original sculpts, such as improved hip-ratchets for Convoy for increased stability. He also had the slightly modified pegs that Legends Class Rodimus (or Blackjack, Runabout, and Runamuck) can securely attach to, which was previously used for Battle Core Optimus Prime. While he features foil insignia stickers on his robot mode shoulders, he also features tampographed Autobot symbols on his side truck panels.
Within G.I. Joe's headquarters, Optimus found Doctor Venom controlling a robotic suit made out of the remains of both Bumblebee and Soundwave. The battle between him and the Joes spilled out into the open and into another battle, where Decepticobra was attacking the United Nations. As more factions joined the brawl, Optimus yanked Bumblebee's components free from Soundwave's body and took to the skies, back to Cybertron. Expelled from the Garden There, he was able to reunite Bumblebee's body with his head. Headmasters
I mean you could argue that they are returning to the way the original Transformer toys worked. Here is an example of the OG Optimus toy. I went to Hasbro's website to see what the most current version of Optimus is that they are selling and I found this. That actually looks surprisingly similar, though I would argue they have gone more of the direction of making the robot look more robotic and the truck a little less truck like but its still a solid middle ground.

This Japanese e-Hobby exclusive is a redeco of Targetmaster Kup, made to represent the character Orion Pax from the cartoon episode War Dawn. He transforms into a Cybertronic pickup-truck thing. His truck bed has a peg-hole to mount his partner Barrelroller, who also serves as a hand-held weapon. The set also came with a re-deco of Wheelie as Dion.
Naturally, Optimus Prime got the biggest of the sets in the first year of Kre-O. The set can be built into a large long-nose tractor-trailer rig with a removable "sleeper" cab that hides a computer station, and a trailer that can carry the set's two motorcycles or open up to carry larger car builds. The robot mode build includes a huge Optimus, based largely on the live-action movie Optimus, though with a head based almost directly on the Classics Voyager Optimus. He is armed with a distressingly plain brick that fires pressure-launched missiles (aka his smokestacks). Most of the leftover parts in robot mode become a "headquarters" which is mostly just a random assemblage of mismatched-color panels and a pair of barricades. Both main builds leave numerous parts unused if you go expressly by the instructions, but hey, it's a building kit, surely you can find someplace to apply most of them.

As with other earlier Cyber Series figures, Optimus Prime had a rather strange release cycle. At first, he only retailed exclusively in Asia and Latin America, with the closest to a U.S. release being in limited quantities from online retailer BigBadToyStore.com. He did, however, end up being available in the Universal Studios Theme Park, and also later as a Walgreens exclusive.
As one of the first Transform Jr toys, this version of Optimus Prime was released under the early name for the series, Transform Gōkin. As a smaller, simplified version of the original Generation 1 Prime figure intended as a low-cost alternative for younger children, Prime features a similar transformation, with a removable head in addition to fists, but lacks rubber tires and translucent windows. As with most other Transform Jr figures, he lacked any of his major accessories, coming only with his rifle and a cardboard replacement for his trailer that had to be assembled by the buyer.
×