Pressing the button on his robot mode chest activates the red lights (well, because the blue ones are expensive for the price point) on his chest, and the sounds and voice phrases (provided by Taitem Kusunoki) were played along with the light-up gimmick. Pressing the button for a few seconds will activate his long voice line with transformation sounds.
He includes the Sword of Judgment and Sentinel Shield accessories, which he can respectively wield and mount on his left forearm, all via 6mm post. In truck mode, the sword is stored underneath, while the shield mounts onto the trailer hitch. The sword also features a 5mm post on its hilt. Interestingly, the truck mode is able to pull G1 Optimus Prime's trailer.
Available exclusively at Toys "R" Us, Rodimus transforms into a futuristic car that is a homage to the vehicle mode of Generation 1 Hot Rod. A panel on the car's hood, which is also the figure's chest, can be flipped to either show an engine block or the figure's Autobot insignia. The figure comes with an Energy Bow, capable of firing two missiles. His bow can also be tabbed to the roof of his car mode or snapped on his hand. The tabs that secure his bow in vehicle mode are 5mm wide, making it usable by other figures as well. His legs are normally bent for the underside of his car mode but can be locked straight during transformation.
In Transformers Ongoing, which takes place two years after the events of All Hail Megatron, the Autobots would remain on Earth as Prime feared the return of the Decepticons. Unfortunately, this led to the capture of a number of Autobots by Skywatch, including Windcharger, Gears and Prowl. Hot Rod was reformatted into a Pagani Zonda. Already frustrated, he lashed out at Optimus, accusing him of keeping the Autobots on the planet because he needed someone to protect and demanding he be allowed lead a team to rescue Prowl. An admonished Prime agreed to a covert operation, but with Ironhide along to watch over things. While Prowl was freed, it turned out the humans had used him as bait to draw the other Autobots in. However Wheeljack's new shielding protected Hot Rod's team from Skywatch's inhibitors and in a panic the soldiers switched to lethal measures. Hot Rod was targeted and Ironhide was killed protecting him. An enraged Hot Rod turned on the humans, damaging their equipment and machinery.
Part of Hasbro's Platinum Edition offerings for 2016 intended to commemorate the 30th anniversary of The Transformers: The Movie, this Optimus Prime is yet another redeco of the Classics Voyager toy. Rather than the show-accurate colors like the Age of Extinction 2-pack figure, the toy's deco is very similar to the Classics release, with some changes and omissions: his blue plastic is a dark metallic sheen, his knee's yellow detailing was removed, his small Autobot symbol tampograph was placed on his right shoulder, and his larger one is placed on his energy unit. His side door/arm kibble is left unpainted. According to Mark Weber, this was meant to represent his abdominal area being torn in the movie's battle. (Yeah, we have no idea how it works, since the "battle damage" parts end up on his arms in robot mode.)
The first Generation 2 Optimus Prime toy was largely identical in sculpt to the original release. However, his trailer was cast in black plastic, with the original blue and silver striped sticker replaced with a red and silver one that had "Optimus" in large block letters on it. The trailer also featured a soundbox attachment with a sculpted Autobot symbol on the front. The soundbox could activate a truck engine noise, a laser gun sound effect and a (badly) garbled voice that said "I am Optimus Prime!". This soundbox could also be attached onto Optimus Prime's back and be used as a sort of backpack.
The line was released as "The Transformers" in the United States, Canada and the UK in 1984 (One year after the Gobots) but Takara was still marketing Diaclone at least during 1984. Hence in Japan "The Transformers" did not debut under that brand till 1985, when the line was also rolled out to the majority of the rest of the world between Takara and Hasbro. Hasbro Europe still will not accept, however, that the range was released in the UK in 1984[citation needed], not even with evidence such as Argos 1984 catalogues containing the range, the UK comic launching in September 1984 or even the 1984 Transformers product catalogue produced by "Hasbro Industries (UK) Ltd, Wokingham". It is thought that Hasbro Europe as it now stands did not come into existence till 1985, hence no records of Transformers sales in 1984.[citation needed] UK Transformers toys were sold in boxes identical to those of their American counterparts until around 1998/9 when the range started to have UK exclusives.
If Optimus went along with Perceptor’s plan, he sent out Sparkplug to fetch the Autobots’ secret stash of emergency fuel. Putting all of his faith in the Autobot scientist to uncover a cure swiftly, Optimus attempted to comfort his troops as they all began to experience sickness pains. Then, Red Alert informed Optimus of a Decepticon attack force moving in on their position, prompting Optimus to ask Perceptor to dispense whatever cure he had been able to concoct, despite it being untested. Perceptor suggested another course of action to Optimus; the tainted fuel the Autobots had left untouched could be used to create a poisonous smog if lit aflame. The Autobots could attempt to poison the Decepticons with their own concoction, or they could risk the untested antidote, despite whatever side-effects it may have.
Armada Built to Rule Optimus Prime transforms into a fair approximation of his vehicle mode, but the robot mode is quite inaccurate, due to the very broad, flat Trans-Skeleton with thin, stick-like limbs attached to it. The set came with a very simplistic "Mini-Con" Sparkplug partner kit that did have a more dedicated "Powerlinx" connector than the standard construction pegs, though these are a bit too thin to be used as attachment points for regular Mini-Cons (they stay, sort of, but it's a very loose connection). The 101-piece set also features pressure-launch missile-firing "smokestack" cannons.
In addition to being probably the most popular Generation 2 figure, Laser Optimus Prime was, prior to 2003, a regular contender for most popular Transformers toy ever, back in the days of the annual Transformers fan awards, "The Trannies." The toy won twice, and actually lost once to his repaint, Scourge. The launch of the Armada and Alternators line, along with Masterpiece Prime, saw Laser Prime drop down that list distinctly.

Optimus Prime also appears in the text-based fiction Dungeons & Dinobots. He commands the Autobots to attack the Arch-Ayr fuel dump. The attack is thwarted when the main Decepticon forces are augmented by the Mayhem Suppression Squad. When Wheeljack attacks both the Autobots and Decepticons with a massive force of drone Dinobots, Optimus offers to allow the outcast Autobot scientist to rejoin the Autobot ranks if the Dinobots destroy the Decepticons. The Dinobots prove unstable and go on a rampage, attacking everyone, including each other. Optimus punishes Wheeljack by having Ratchet painfully reformat him for Earth mode and assigning him to the Ark repair crew on the advice of Side Burn. He punishes Blurr for allowing his heroic Decepticon cousin, Crasher, part of the Mayhem Suppression Squad, to live. When Grimlock returns to the Autobots, Optimus lets him live because the Dinobot has gained useful intelligence and helps in work on the Ark.


Long before the internet came along and ruined life as we knew it, Children amused themselves with the most primitive of toys. At the top of the food chain was the yo-yo. Believed to date back to around 500 B.C. in Greece, and even believed to have been used as a crude weapon in the Philippines, the yo-yo (pronounced yo-yo) made a roaring comeback in the 1920s as a toy, and to a lesser extent as a weapon.
"Vibrant Red" Alternity Convoy is a redeco of the "Ultimate Silver" figure in the much more traditional red and blue Prime color scheme, representing the Optimus Prime of universal stream Primax 109.0 Beta. The figure was available simultaneously with the Ultimate Silver version, sharing the same packaging and pack-in materials, save for the color of the illustration on the front of the box, and a sticker that identified the figure within.
Surprisingly, this was also the first Hasbro exclusive transforming Movie Optimus Prime figure to be based on the final design seen in Age of Extinction. He even features the forearms that Prime had before obtaining the Sword of Judgement, which unfortunately means that he is inaccurate to his appearance in the battle of Hong Kong and the entirety of The Last Knight. The sword's blade is still painted as the heated-up version from the concept art.
If Sparkplug suggested that the Autobots not worry about subtlety, the entire squad transformed and began prowling the streets in search of Decepticons. Oblivious to the panic they were causing, Optimus assumed that the Decepticons were spotted nearby when a police officer declared that the city was under siege by giant robots. Unable to restore order in time to halt the Decepticons’ plot, Optimus and the rest of his team were destroyed in the ensuing earthquake.
Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.
The TakaraTomy release of Optimus Prime has considerable differences from the Hasbro release. His blue and red plastics are darker and metallic, his translucent blue plastic is darker, and a few of his paint operations have been omitted and replaced with customer-applied foil stickers, such as his shins, feet, headlamps, and insignias. His legs, outer forearms and truck mode "sleeper cabin" side panels have been retooled to include 5mm post-holes as part of the line-wide "Arms Micron" gimmick. As such, he does not come with the Hasbro version's weapons, but instead an Arms Micron partner named O.P. who transforms into a weapon resembling Optimus's in-show blaster cannon. This version of the mold was also used to make Prime Nemesis Prime.
I suspect that part of the problem with people’s perception of price is also due to changes in tastes as they grow up. A small child will be pleased with relatively small sets, since their lego collection and experience is likely to be almost non-existent. But as they get older, they will tire of the small sets and want ever bigger sets. For adults, most of the fun is in building rather than playing, meaning that size is everything. This means that over their lifetime, the price an individual person (or their parent) pays for lego sets does go up–because the composition of their purchases changes–even though the prices of lego sets over time does not.

Sure enough, in 2009, when the Hytherion's colossal claw-marks appeared on planets throughout the solar system, Prime's other-dimensional incarnation returned, bringing with him a "Vibrant Red" Vector 109 auto-avatar with which Prime fused. In that instant, he was reborn as part of the Alternity, a manifold being who encompassed all the different incarnations of Optimus Prime through the multiverse at once. Prime reached his hands heavenward and peeled back the layers of reality, exposing the gargantuan fanged maw of the Hytherion looming above the Autobots. From Here to Alternity
Honestly, all the charts were done in Excel. I tried other methods but that was the easiest since all my data was in excel already. They are X,Y Scatter plots with sooth lines – heavily tweaked. Made the lines thicker which makes it look smoother and changed the layout a bit to make it clearer. The Excel defaults are ugly but if you spend enough time tweaking them you can get something passable.

The Sword of Judgement included with this toy is the same mold as the weapon included with the Age of Extinction leader class Optimus but cast in flat grey rubbery plastic rather than the transparent plastic and paint operations of the initial release. This Optimus Prime erroneously features blue paint on his feet instead of the screen-accurate red.
Fellow Seibertronian Actar has written an in depth review on the new Transformers Studio Series Jetfire. He gave us great images of all modes including the combined mode and the giant cannon. We see how it scales with both SS ROTF Megatron and the ROTF Fallen. Enjoy! Alrighty! Just got my hands on the latest SS Voyagers and Leaders. However, the one that has won me over the most is Jetfire. So, I was rather hesitant and critical about Jetfire when I first saw him, but - Read More
The Decepticons' initial strike came abruptly and brutally, devastating entire districts of Metropolis. Optimus was meeting with Hot Rodimus as this took place, and was nearly overcome with grief when Ratchet informed him of the carnage the Decepticons had wrought. Steeling himself, Optimus coordinated the city's defenses, ordering his troops to be dispatched where they were most needed to repel the invasion. Upon spotting an old enemy on one of the nearby monitors, Optimus geared up to go in the field himself. Arming himself with his favorite pistol, Optimus resolved to take down Megatron. Raid
Optimus foiled Megatron's attack on 21st century Tokyo after informing his old foe that wherever he would pop up, the Autobots would be there to thwart his evil intentions. Henkei! Henkei! volume 1 Optimus and Bumblebee later intervened when Astrotrain attacked Shinjuku Station, using their bodies to shield nearby humans from the destruction the triple-changer brought about. They were unaware that Astrotrain's rampage was really a distraction staged to keep their attention away from Megatron's gathering of energon cubes nearby. Henkei! Henkei! volume 2 Optimus continued to do battle against Astrotrain until Rodimus showed up to provide the Autobots with additional firepower. Henkei! Henkei! volume 3
"Convoy Last Production" was the final re-use of the Masterpiece toy mold before it was at last retired after numerous re-releases and redecos. The figure is essentially identical to the original Japanese MP-1 release, aside from a slightly brighter red, and the addition of the words "LAST SHOT" in Transformers typeface molded into the small of Convoy's back, hidden beneath its headlight-flaps in robot mode. Lacking the trailer of MP-4, the figure instead comes with a redecoed version of the electronic base included with Hasbro's "DVD Edition" of the figure from five years prior, which now features a collection of sixteen soundbytes of Convoy delivering famous lines from the Japanese version of the Generation 1 cartoon, recited by the character's original Japanese voice actor Tesshō Genda. The base was promoted as containing a hint as to the identity of the next Masterpiece toy; as it would turn out, this was a new version of Convoy himself (see below), foreshadowed by a sound clip on the base which played only intermittently, and which had Convoy announce that he would "soon be reborn".
Optimus Prime has a wide range of articulation for a relatively bulky figure. He has ratcheting joints in his shoulders, elbows, hips and knees, with swivel joints and ball joints supporting them in his biceps, lower knee joints and ankles. Again, unusually for a mainline figure, especially at the Leader pricepoint, his hands have individually articulated fingers and thumbs, but no wrists.
The TakaraTomy version of Premium Series Optimus Prime has a considerably different deco from Hasbro's release. Similar to the unique chrome Optimus Prime, Optimus Prime Battle Mode features vacuum-metallized parts for nearly all of the silver truck parts, for a greater resemblance to the polished chrome on the real prop trucks. Unfortunately, as his feet are the front fenders and grill, this will likely lead to chipping. In robot mode, he retains several decos that were removed from Hasbro's Premium Optimus Prime for cost reasons, such as the blue and gold decos on his thighs. Finally, the flip-out energy sword is coloured gold to reflect its "powered up" appearance.
The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.[6][7]
The toy that would ultimately end up as the original Optimus Prime toy was originally released in August 1983 as No.17 Battle Convoy from Takara's Diaclone Car Robo toyline in Japan. In 1984, Joustra released their own version (still with Diaclone sticker on the trailer) as part of their Diaclone line in Europe, either simply called Truck (according to the pack-in catalog) or Diaclone (in the pack-in comic). It's possible that GiG also released a version called Camion Convoy as part of their Trasformer line in Italy, but to this day no packaged sample has surfaced.
With the failure of the Generation 2 series, Hasbro and Takara decided the franchise needed an overhaul. They went in a new direction and a new beginning. While there had been Transformers that change into robotic animals, the premise of the new line was that all figures would transform into animals with realistic appearances. The Beast Wars toy line was launched in the autumn of 1995, and Mainframe Entertainment produced a computer-generated imagery, or CGI, animated series program to tie in with the new toy line. A fresh idea coupled with a TV series program with strong stories assured this series the success Hasbro and Takara needed, as this series was a giant hit in international markets as well as in Takara's home market, Japan.
As the battle wore on, Optimus attempted to drive the Autobots too wounded to outrun the Beast themselves to safety, carrying them within his trailer. Jetfire showed up in time to rescue most of his passengers, leaving Optimus to deal with The Beast on his own. Seeing a city coming closer over the horizon, Optimus attempted to reach the Dinobots one last time from within The Beast. As his former troops remained unresponsive, Optimus led The Beast to its doom, blasting it a few more times before leading it to fall into a chasm. Optimus himself was rescued from the fall at the last possible moment by Jetfire’s timely return. As the two of them looked on at the Beast’s inert form, Optimus wondered out loud if their battles would truly ever come to an end. The Beast Within Part 2, Consequences
A minor redeco of Beast Hunters Voyager Class Optimus Prime that has the gray parts cast in a darker plastic shade, lacks the black paint operation for the Star Saber's hilt, changes the color of the side windows' paint operations from yellow to green, adds yellow paint operations for the headlights and lacks the silver paint operations above the front windows.
Optimus Prime landed in the Himalayan Mountains with G.I. Joes Flint and Hawk. As they searched the area, the trio was attacked by Bludgeon in his Pretender shell. Prime whacked him with his energon-axe and in return Bludgeon bearhugged him and coated him in metal-eating slime. Hawk, still carrying power from the Matrix, helped Prime break free. Optimus then shot his way into the hidden kingdom of Cobra-La.
The final scraping was done in Python. A long time ago when I started it, the prototype was in a language called DM or byond. This is a language created for the purpose of writing 2d online rpgs. It was my first language and was easy to pick up but this was pushing its limits a bit. I actually ran the first scrapping on my other post (the Politics one) in this language. The results were not what I used in the article but it was a good proof of concept.
Platinum Edition Optimus Prime was only available as part of a 2-pack with Megatron, named "One Shall Stand, One Shall Fall" after Optimus Prime's famous line in the movie. In the United States and Canada, this set was officially released as an Amazon exclusive. It was also available in several of Hasbro's Asian markets (namely the Philippines and Singapore; it's currently unknown whether it was exclusive to any particular stores there or not). In Australia, it was sold at Myer stores, whereas in the United Kingdom, it was both sold at Toys"R"Us stores and available via Tesco's website (but never found in stores). Surprisingly, it was (and still is) a common find in Brazilian online stores.

Through the years, there have been many action figures made in the likeness of the original incarnation of Optimus Prime, some of which have been featured in fiction, others of which have not. Additionally, some toy makers have made unlicensed toys in his image or accessories for the existing toys. The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[23] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the Transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original Transformers toy line.
The final waves of this line, released in early 2014, really pushed towards younger kids, with incredibly simplified designs based on the characters' Cyberverse releases, which actually allowed the toys to be larger than most others in their size class. Unfortunately, as they were tail-enders, their US releases were nearly nonexistant: only the Voyagers made it out at US retail, and only through discount chains like Ross and TJ Maxx. The rest ended up released only overseas (not even Canada got them!).
Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.
Bludgeon's recovered files bring Optimus Prime to Earth, where an Autobot detachment led by Prowl has discovered that a Decepticon infiltration unit led by Starscream has broken standard protocol after discovering a new form of Energon. This Ore-13 appears to be the same "Ultra-Energon" that Bludgeon used to revive Thunderwing, who had been dormant for millennia after the apocalypse. Starscream had already used it to fuel a failed attempt to usurp Megatron's leadership, as detailed in the Infiltration miniseries.
Interesting work but I would like to know whether you would find the amount of new sets offered in toto has changed over the survey period. Is there an economy of scale at work? This seems to have two implications: first, the number of units for a particular set may have increased thereby affecting the price of all sets belonging to that class (but doubtful you could find exactly how many Death Star sets were produced in relation to, say, hogwarts castles); second, the popularity of certain set classes may affect what kinds of sets are available. Like with language, we are all confined to use the words we know. And so with Lego, set designers are confined to use what’s economical, unless, of course, the design calls for new styled pieces. These relations are difficult to grasp in statistical analyses, but would seem to play a role in price steering.

Hot Rod is often portrayed as energetic, yet brash and headstrong, with an overwhelming self-confidence that borders on arrogance.[1] As Rodimus Prime, leader of the Autobots, he is significantly more mature, physically powerful and instilled with the wisdom of the previous holders of the Matrix of Leadership. In a reversal of his behavior as Hot Rod, Rodimus is plagued by lack of confidence in his role as Autobot commander and often doubts his own decisions, feeling both inferior to and in some ways living in the shadow of the previous leader of the Autobots, Optimus Prime.

The Heroes of Cybertron PVC figurine line is an adaptation by Hasbro of Takara's own Super Figure Collection line. The main differences between the two lines is that Hasbro cast Autobot and Decepticon figures in clear blue or clear red PVC respectively, then completely painted the figurines. This allowed the eyes to 'glow' when placed in front of the light source.


Arms Master Optimus's "Space Blaster Mode" is a mode designed for fighting in outer space, introduced in the Cybertron Satellite segment of "Infinite Transformation! Multiplying Enemies". He wears R.A. and Shining R.A. on his shoulders as wings, C.L. and C.L. GR on his back as thrusters, and B.H. and B.H. B on his feet as... more thrusters. His weapon of choice in this mode is the Matrix Blaster.
Though he was packaged on an individual box, he was initially sold as part of a set with Dark Energon Megatron. He was eventually made available on his own, and all of the Dark Energon Series toys were eventually made available in Singapore as mass-retail releases. The Voyager Class toys, in particular, also saw mass-retail release in the Philippines.
Transformers GT "GT-R Prime" is a heavy retool of Alternity Convoy, transforming into a 1:32 replica of the Motul Autech GT-R race car used by the Nismo team in the Super GT racing championship series. He retains the flip-out blasters of the Alternity toy and can also wield his new Impact Wrench Gun accessory (also called the "Optimus Rifle" on the Transformers GT website), a weapon based on the impact wrenches used in car repairs. Like all GT toys, Prime also comes with a GT Sister, poseable human figures themed after race queens, his partner being a lady named Misaki.
We say "intended", because in actuality, the thing appears to have been produced in such huge quantities that it's wound up being made available in loads of other places—it was handed out at San Diego Comic-Con 2011, offered as a free giveaway with any order that included Transformers toys on Hasbro Toy Shop), as a free gift on the cover of the Awesome Autobots Activity Book, and came as a free gift attached to, of all things, issue #240 of the UK children's comic, Doctor Who Adventures (but not the UK's Transformers comic, you'll note!).
In "The Elite Guard", the Autobot Elite Guard, composed of Ultra Magnus, Jazz, and Sentinel Prime, arrive on Earth to reclaim the Allspark. They don't believe Optimus' story about the Decepticons and Sentinel Prime wishes to have him court-martialled. When a fragment of the Allspark causes a production line to go haywire, Optimus finally stands up to Sentinel, retrieving the fragment, and earning praise from Ultra Magnus.
This small version of Energon Optimus Prime was released by Kabaya as part of their DX Transformers line of candy toys. Prime transforms in the same manner as the larger Energon figures do, though his arms have to be removed at the shoulder and reinserted into his back to form truck mode. The Prime Force were sold in a separate set in the DX Transformers series, and can combine with Prime to form his Super Mode. Optimus came with a stick of gum.
By the ‘90s, the genre had begun to fade, and boys' minds turned to more high-impact action, often centered around mutants, monsters, and karate. Hasbro saw potential in the embers of the Transformers brand, and turned it over to newly-acquired subsidiary Kenner for a jump-start. Kenner threw out all the old rules, and invented a line of Transformers that were more poseable, more feature-packed, and more exciting. Backed by a high-tech CGI cartoon, Beast Wars turned the brand around, making Transformers a bestseller again.
Part of the first wave of Prime: First Edition Voyager-Class toys, Optimus Prime transforms into a truck, with a similar (but more complex) transformation to his previous Deluxe-Class toy, and features a faux-kibble window-chest panel as well as a detailed truck cab interior. He comes with a "Cybertronian battle sword" and a "plasma cannon", either of which can peg into his hands. The cannon also features a 5mm peg-hole on the underside of its barrel, allowing the sword (or any other compatible accessory) to mount there as a bayonet. They are stored in vehicle mode by pegging them onto either the 5mm-compatible trailer hitch, or onto each peg-hole beside it, although the instructions tell you to peg the sword facing forwards onto the hitch, with the cannon mounting backwards onto one of the side pegs. His trailer hitch ends up on his right robot leg, and he has a fake, sculpted, equally-usable trailer hitch on his left leg. He features a cardboard stand as with all "First Edition" toys, but the weak adhesive used for its flaps mean it often has trouble supporting the weight of a Voyager class figure for an extended amount of time, the top caving in as the glue gives way.
This Asian-exclusive redeco of AM-01 Optimus Prime features a sticker-less, extensive paint-job, coating his red parts and half-translucent arms in glossy metallic paint, painting his torso, shins, grille, fenders, and wheel rims silver, painting half of his feet in glossy black, having painted headlights, and featuring a unique "snake" insignia on his roof/right shoulder-pad, due to 2013 being the "Year of the Snake". O.P comes pre-assembled, lacks stickers, and features paint operations.
Jetwing Optimus Prime is a retool of Revenge of the Fallen Leader class Buster Optimus Prime, with an accompanying large jet pack and massive dual Gatling Cannons. The base Optimus Prime figure has several modifications including: a new stomach area and elbow flares to reflect the changes to Optimus Prime's CG model in Dark of the Moon, modified lower arms to incorporate MechTech ports and clips for the cannons, and a retooled area under his back so the jet pack can fit on more securely. The dual energon blades mounted on his arms have been removed. The toy retains Buster Optimus Prime's electronics, but batteries are not included.
This figure contains an unusual amount of sculpted detail on the inside of the plastic. The gorilla mode's chest has a ribcage, and the inside of the gorilla's face has a sculpted microphone, which lines up perfectly with the robot mode's head! Also, opening this toy's chest in robot mode reveals sculpted detail resembling the Key to Vector Sigma as it appeared in Beast Machines.
For many, it may seems that the advent of licensed sets3 correlates with the perceived increase in prices. The 1990s and before were a nostalgic heyday of affordable LEGO sets. This is not quite true. Below is a chart that compares the price per piece of licensed sets and unlicensed sets starting in 1999. 1999 is the first year that LEGO had major licensed themes.
Available exclusively at the Tokyo Toy Show 2012 (along with Prime Shining Optimus Prime), Black Optimus Prime is a very minor redeco of the previously unreleased Gentei! Gentei! black version of Henkei! Henkei! Convoy, itself a redeco of the Classics Voyager Class toy. As such, Black Optimus Prime is mostly cast in black plastic, with some gray parts, translucent red windows and teal paint operations.
Doug Smidebush, Lior Keinan , Kelvin Nduka, Thad Standley, Nolan Zak, Adam Franks, Stephen Brown, Loren Roberts, Matt and Nykki Boersma, Tom Morgan, Jack Everitt, John Kovalic, Seiler Hagan, Jess Hart, Will James, Christopher M. Kelly, Roberto L. Vargas, Michele Hall, Chuck Lawton, Ismael Schonhorst, (There are those who call him) Tim, Vladimir Weinstein, Randiman Rogers, Robert Booth, Henry Roenke, Kevin Culp, W. David MacKenzie, Nicholas Richards, John Idlor, Michael Fox, Rob H., Matthew Cody, Dan Callahan, Patrick Kohn, Seth Phillips, Kevin Korpi, Ben MS, Monica, Mark Gonyea, Pharlain Ross, Derick Larson, Furstarter.com

The lowest priced toys in the Armada line were three-packs of Mini-Cons. Each larger price point consisted of an Autobot or Decepticon who came with a Mini-Con partner. Mini-Cons could be used to unlock a variety of features on each larger robot, such as firing weapons, electronic lights and sounds, or alternate modes. Some three-pack Mini-Cons combined into other forms or had additional features. According to the storyline, Mini-Cons also enhanced the power of other Transformers, giving incentive to collect as many of them as possible.
2. Piece diversity: Today the total range of piece types and the number of new piece types introduced every year has skyrocketed since the decade of the 80s. As a kid, the new pieces introduced every year were indeed one of the great answers to my parents’ pleas of “don’t you already have ENOUGH Legos?!?!” However, the quantity of new piece types again coupled with the broad color diversity again requires much more Lego to be purchased to attain that “critical mass”.
Starscream was my first transformer. I got it because my parents bribed me to climb to the top of the pole in the gym class. Shit was scary. Do they even make kids do that anymore? Anyway, I protected that with my life. Sorry to hear about yours. I didn't have siblings at the time but within a few years I did have some who pretty much did destroy everything they touched. Luckily by then I was a teenager and figured out good hiding places for important stuff.

If Optimus allowed the cured Autobots to charge headlong into battle, he and the rest of the Autobots who were still running low on fuel stayed behind as back-up to the main charge. The Autobots’ first wave of warriors were quickly overpowered by the arrival of Megatron, prompting Optimus to lead the energy-depleated Autobots into the fray. Optimus’s opening volley struck down Shockwave. Optimus and his troops soon found themselves running on empty, and Optimus called for a retreat. Thankfully, the Decepticons were damaged enough through the course of the battle, causing them to retreat as well.


Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is an extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation 1 and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
Hero Optimus Prime was the first new-mold Optimus Prime toy in the Generation 2 line. He transforms into a Kenworth truck of unknown model with a flatbed trailer. The truck and trailer form his robot mode, but cannot disconnect. His primary gimmick is an air-powered missile launcher that uses an air bellows attached by hose to launch his large, hollow, soft-rubber-tipped missiles. The bellows and missiles attach to his back in robot mode. His rifle plugs into the launcher's main body in truck mode.

One more thought: LEGO is a Danish company. The fluctuations in the price of LEGO such as the big bump around 1985-7 in Figures 1 and 2 could be because of a change in exchange rates. The conversion rate between the Danish Kronor and the US$ went from over 10 in 83 and 84 to less than 7 in 86 and 87. LEGO might have been slow to respond to changes in exchange rates, leading to the temporary bump. If you’d like to share data we can redo your graphs in DKK.


This exclusive redeco of Optimus Prime features darker shades of red and blue than his other releases and has extensive paint applications to resemble his on-screen appearances in The Last Knight, particularly his Nemesis Prime alter ego seen in the film. To that end, he features movie-accurate flame patterns, which are larger and more elaborate then the ones on the regular release or the SDCC exclusive, on his vehicle mode exterior and robot pectoral armor. His eyes and sword are also painted metallic purple, but his shield is completely unpainted for some reason.
Optimus pondered Sunstreaker's whereabouts after noticing that he had been absent from Autobot headquarters for longer than expected. The answer came through Blaster, who relayed a message from Megatron; Sunstreaker was the Decepticons' captive. Megatron demanded that the Autobots surrender, or else Sunstreaker would be destroyed and rebuilt as a Decepticon! The Autobots refused to give up without a fight, but Optimus took care to explain the threat they were up against before a rescue party headed out. Optimus told Sideswipe, Slag and Sludge of Devastator's combiner nature, and warned them not take the danger he posed lightly. The rescue squad failed in liberating Sunstreaker, and were captured themselves. The Autobots were shaken by this turn of events, but Optimus was able to think up a new plan to trick the Decepticons. He ordered his Autobots to build a hollow statue of Devastator for him and his soldiers to hide within. Optimus then wrote a letter explaining that the statue was a peace offering for the Decepticons, and the completed decoy was placed before the Decepticons' base. The ruse worked, and Optimus and his troops burst forth from the false Devastator after the Decepticons had let down their guard. An all-out brawl between Autobots and Decepticons followed. The fight came to an end when Megatron attempted to down Optimus with his fusion cannon, only for Optimus to deflect Megatron's beam back at him by bouncing it off a reflective piece of metal. With the Decepticons defeated, Optimus ordered his troops to retrieve their wounded and return to Autobot headquarters. The Autobots' Secret Weapon
Optimus and his Autobots were aboard the Ark, on the run from the Decepticons. With him, Optimus had what Megatron was forever seeking; the AllSpark! With the ship taking heavy damage from the Autobots' pursuers, Optimus ordered Jazz to take them into an emergency quantum jump. Jazz informed Prime that the jump would take longer to initiate than the time the Decepticons would need to board their vessel. As such, Optimus entrusted the AllSpark to Bumblebee while he and the rest of the bridge crew steeled themselves to hold off their enemies. Thanks to Starscream breaking rank in the Decepticons' formation, Optimus was able to hold back Megatron, and with Heatwave's help, repel them from the ship just as it initiated the quantum jump. However, at that moment the AllSpark tumbled off-ship, falling into the quantum tunnel and seemingly being lost for good... Angry Birds Transformers #1
Optimus was able to rally Autobot factions from across Cybertron to the cause and launch an all-out attack on Shockwave's fortress. He headed the assault himself, but broke rank when he saw the image of Shockwave blasting Ultra Magnus upon one of the many monitor screens planted around the Decepticon's headquarters. Optimus charged in to confront Shockwave, beating down all opposition along the way. Coming upon Shockwave's throne room, Prime was greeted by Ultra Magnus, who pointed him towards a secret passage through which Shockwave had absconded. Leaving his wounded brother to rest, Optimus barged into Shockwave's secret chambers, only to be overpowered and have the Matrix ripped from his chest. With it, Shockwave was finally able to activate Vector Sigma. Countdown to Extinction Stalling, Prime listened as Shockwave recounted the history of Cybertron, and eventually Ultra Magnus arrived, having recovered, to attack and defeat Shockwave. Prime and Grimlock helped him escape from the fortress as it crumbled to the ground. With Shockwave's defeat, the Autobots would now be able to start rebuilding Cybertron towards true peace... but Optimus remained troubled by Shockwave's motives; he recognized that Shockwave would not be urged to action by mere fancy. Optimus pondered what greater threat awaited Cybertron for Shockwave to so thoroughly plan for its arrival. Revelation The injuries Prime took in this conflict necessitated a prolonged restoration period in stasis. Both he and Ultra Magnus were tended to by Perceptor and Hoist as they recuperated. Generation 1 #0 Though Magnus recovered in due course, Optimus's systems had received a more severe shock due to the Matrix being forcefully removed from his frame. Thus, he needed additional time spent in recovery before he could reboot. Black Sunshine
In the "Transformers" film, the robots had more of an alien feel to them to fit the theme of an alien invasion. The robots (stated by Optimus Prime) in the film are actual sentient organisms and not just giant, mindless, and mechanical machines. The robots can also speak their own alien language sounding like what seems to be based on different pitches and frequencies. Alongside that, they gave them more alien features that probably wasn't mentioned in the comics or T.V. series such as a highly advanced exoskeleton, force field, and a special "alien meteoroid" mode which they transform into individually and arrive on earth in. The exoskeleton is a "self-regenerating metal" in which the aliens are composed of (stated in the film) that is the equivalent of living skin that heals itself.
Released in conjunction with Japanese cellphone maker au[10], au x Transformers INFOBAR Optimus Prime celebrates 15 years since the 2002 au Design Project that resulted in the INFOBAR cellphone, as well as the 10th anniversary of the live-action films. He transforms into a (non-functional) scaled-down replica of the 2002 au INFOBAR, and in lieu of cellphone functions, the figure can be paired via Bluetooth with a smartphone, such as an iPhone, to act as a notification alarm in either robot or INFOBAR mode. The screen is also non-functional, but pre-printed cards are included which can be slid into the screen to show an Autobot logo, Decepticon logo, a mockup of a cellphone home screen, or a technical "Transformers INFOBAR" design. The figure also includes a display stand.
In robot mode, like Combat Hero Prime, the bottom of the truck became his familiar windowed chest based upon the original Optimus Prime toy. His main gimmick was light up LED headlights, and a lightpipe in the bottom of his right fist, illuminated by an LED in his right forearm, that would illuminate his clear sword or his double-barreled rifle if they were used in that hand. All three LEDs were activated simultaneously by pressing the sunroof-like depression on the roof of the truck.
×