Optimus Prime's character returns in Transformers: Revenge of the Fallen. He leads the Autobots as part of NEST in seeking and destroying remaining Decepticons on Earth. At the beginning of the film, the massive Decepticon Demolishor is rampaging through Shanghai, China, and Optimus parachutes out of a plane to take him on. Before he is killed, Demolishor tells them that the Earth is "not theirs to rule" and that "the Fallen shall rise again". At the NEST base, Optimus tells Theodore Galloway that they do not know what The Fallen is and that if they are asked to leave Earth, the Autobots will comply. When the remaining Allspark shard is stolen, Optimus asks Sam for his help in convincing the Earth's leaders to allow the Autobots to stay, but Sam refuses. When Megatron is resurrected and Sam, Mikaela and Leo Spits are kidnapped, Optimus and Bumblebee attack the Decepticons holding them. Optimus fights Megatron, Starscream, and Grindor on his own to protect Sam in a forest. Though he manages to kill Grindor and rip Starscream's arm off, Optimus is ultimately killed by Megatron. His last words were for Sam to run. His body is taken to a military base where Galloway orders the Autobots to bring his body back to Diego Garcia. Meanwhile, Sam hears from Jetfire that "The Fallen" is an ancient Prime and that only a Prime could kill him. He also said that the Matrix of Leadership may be able to revive him. After a long battle with the Decepticons in Egypt, Sam resurrects Optimus using the Matrix, but it is subsequently stolen by The Fallen. Because Optimus is still weak, Jetfire offers to sacrifice himself to help. Ratchet and Jolt convert parts from Jetfire into a jet mode for Optimus. Optimus flies over to the pyramids and destroys the Sun Harvester. After severely damaging Megatron, he kills The Fallen, forcing Megatron and Starscream to retreat. At the end of the film, he thanks Sam for reviving him and again transmits a message to space, hoping to find more Autobots.
Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster stored in the form of the fuel tanks on his back, and a shell cannon stored on his back, two retractable energon blades that extend from both forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, two retractable energon hooks on both of his forearms, and bladed knuckles. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.

There may be two things you didn’t know in this one: 1) Bumblebee is in the Transformers Hall of Fame; and 2) There’s a Transformers Hall of Fame. The shrine to all things Transformers was the brainchild of Hasbro, the American toy company that worked with Japanese toy company Tomy to create the Transformers in 1984. Starting in 2010, they wanted to honor not just popular characters, but also the real people behind the toys, TV shows, comics, and films.

Then he dreamed of awakening, only to find his troops smashed. Realizing his only hope for survival lay with Cybertron, Optimus then boarded the ship the Autobots were repairing, and travelled back to his home planet. Arriving on Cybertron, he found it completely under Decepticon domination. Optimus then met an old Autobot codger who pleaded that he return to Earth to gather a force that could overthrow the Decepticon’s regime. Optimus remorsefully told the old Autobot that there could be no reinforcements from the planet Earth. The two Autobots were then swarmed by Decepticon police officers, who Optimus fought until his dying breath…

The "Underbite Jetpack Takedown" Optimus Kreon uses the new 2015 style of Kreon hips and torso, with a hollow hip-peg and a central post inside the torso for increased grip... which also makes them incompatible with about four years' worth of Kreons. Based on his appearance in Robots in Disguise, he features a new version of the Optimus helmet, this time lacking a moutplate. He attaches to an included jet pack, armed with two pressure-launch missiles.
In the series released by Marvel Comics, before the Great War broke out on Cybertron, the robot who would be Optimus Prime, before he received the Matrix of Leadership from Sentinel Prime, was a Transformer of note, displaying his skills in the Infraformers Sharpshooting Competition. When the war began, Prime quickly made a name for himself as a combat leader of the Autobots.
On a mission with the Triggerbots to stop Megatron from claiming the Underbase, Prime was forced to jettison the massive databank into space to prevent anyone from acquiring its power. With this action, he proved his wisdom and skill to the Autobot Council of Elders. He continued to move up in rank, eventually becoming the field command over the Autobot armies.

As a 25th anniversary set, Prime includes several new pack-in bonuses: a reprint of the first issue of the original Marvel comic book, a DVD containing all three parts of the animated series pilot "More than Meets the Eye", and three desktop wallpapers, and a battery-powered Autobot symbol that plays transforming sound effects, part of the first version of the Transformers theme song, and three voice clips performed by Peter Cullen: "I am Optimus Prime!", "Autobot, transform and roll out!" and "Megatron must be stopped, no matter the cost." There are some reports that the Autobot symbol could be worn out or damaged during the time of purchase.


The original Optimus Prime toy, as well as the Diaclone Battle Convoy toy that it was based based upon, transforms into a late 1970s red Freightliner FL86 Cab-over-Engine triple-axle semi trailer truck. The truck mode features rubber tires, and the cab is partially constructed of die cast metal. The windscreen section can open to reveal ultimately-unused seats that were originally designed for Diaclone's driver figures.
The figure's transformation scheme is based on the original G1 figure, the only differences being that the fists are not removed but become the headlights, and instead of flipping backwards inside the chest, Diablock Convoy's noggin flips forwards with the aid of sideways-opening windows, akin to Masterpiece Prime. A "laser rifle" in the shape of his ion cannon can be built from black bricks, and stickers bearing the Autobot faction symbol can be placed on Diablock Convoy's shoulders, although this is not recommended as it is designed to permanently stick to multiple tiles which dislodge easily and may damage the sticker.
For the 1987 and 1988 lines, Hasbro introduced even more radical ideas through new sub-groups. The Headmasters and Targetmasters came with partners who transformed into the figure's head or weapon, respectively. Powermasters, including the new version of fan favorite Optimus Prime, came with partners that transformed into engines. Each line would see various permutations over the two-year span, including smaller Headmasters, Double Targetmasters, and a Powermaster with two engines.
Prime comes with all the accessories of his previous release, although his ever-changing ion blaster is now somewhat confusingly cast in blue plastic. He features one major additional accessory: an electronic display base sculpted with the image of the Matrix and the Autobot insignia. Pressing the insignia's crest triggers a series of electronic soundbytes, mostly quotes from the movie recited not by original actor Peter Cullen, but by Hasbro's in-house actor, Ron Hayden: "Autobots, transform and roll out!", "I want you to make a special run to Autobot City," "Megatron must be stopped!", "All we need is a little energon, and a lot of luck," and two samples of the classic transformation sound effect, one ascending, one descending.
If Perceptor gave out the right amount of an antidote, the poisoned Autobots were cured. Optimus ordered his troops to ready themselves for the incoming squadron of Decepticons. Perceptor’s antidote did have a side-effect on the Autobots, however; it gave them a fierce battle-fever, making them eager to take on the Decepticons head-on. Prowl suggested to Optimus that they instead opt for a more conniving counterstrike against the Decepticons, and ambush them instead.

Kiss Players Convoy is a redeco of Alternators Optimus Prime. While the figures may appear similar at first glance, given that Kiss Players Prime is still red, blue and black, there are many subtle differences, not least of all the replacement of the Alternators figure's bare, flat red plastic with a deep metallic red paint. Several of his body parts are cast in different colors of plastic (for example, his shins, formerly black, are now blue, while his formerly-blue hands are now black), and he features more intricate paint applications on his shoulders, and especially his pelvis, which is decorated to look like Prime's traditional bumper.

This Japanese e-Hobby exclusive is a redeco of Targetmaster Kup, made to represent the character Orion Pax from the cartoon episode War Dawn. He transforms into a Cybertronic pickup-truck thing. His truck bed has a peg-hole to mount his partner Barrelroller, who also serves as a hand-held weapon. The set also came with a re-deco of Wheelie as Dion.
Optimus Prime appears near the end of the Decepticon Campaign. Sam and Mikaela inform Optimus that all the Autobots were defeated by the Decepticons. Optimus proclaims that they sacrificed their lives to protect the Allspark, and their sacrifice will not be in vain. Leaving Sam and Mikaela in a safe place, Optimus faces Megatron, but is defeated. Weakened and damaged, Optimus crawls to reach the Allspark. However, Megatron attacks Optimus with his chain-flail, killing him.
"During the Cybertronian Civil War, Sentinel Prime was killed. Prior to his destruction, he bestowed the Matrix of Leadership to Optimus Prime, who became the new leader of the Autobots. Despite being one of the youngest Cybertronian leaders, Optimus demonstrated extraordinary courage and wisdom in the war against the Decepticons. He: treated all lives with benevolence, fought for freedom and peace, and continues to fight to protect the weak and maintain their beliefs.
Micromasters teams have teamwork ratings instead of ranks. Unlike the other ratings, teamwork seems to be split along faction lines, with Autobots typically holding higher teamwork ratings than Decepticons. A second unique spec value, Cooperation, replaced the Firepower rating used on individuals' cards. The traditional order (as above) was also abandoned for the Micromaster team specifications.
This is a new line which features robot versions of various Marvel Comics superheroes (and later more of the Star Wars Transformers figures once it merged with this line). Confirmed figures are Iron Man, Spider-Man, Wolverine, Venom and Hulk. Hulk turns into a tank while Iron Man turns into a jet. Spider-Man becomes a helicopter, Wolverine turns into a 4WD, Venom turns into a turbocharged retro car. They are not to be confused with the Marvel Megamorphs toy line, which also featured transformable mecha piloted by the superheroes. Eventually, the Star Wars Transformers figure joined the line with reissues of previous figures, as well as all new molds.
Prime's new trailer is essentially a heavily armed version of the original, with two double-barreled heavy laser cannons mounted on two arms with visible fists. The rear has a fold-down ramp to allow the storage of a smaller transformer, or perhaps spare accessories. The trailer can be transformed into a Powermaster battlestation that can allow other Powermaster engine figures to man the heavy laser cannons.
If you're still on the fence about Masterpiece MPM-5 Decepticon Barricade, or are considering purchasing Masterpiece MPM-6 Ironhide (which is also currently available), now might be a great chance to grab this Amazon.com exclusive figure from Hasbro. As of this writing, MPM-5 Barricade is currently on sale at Amazon.com for $52.13, which is 35% off the regular retail price of $79.99. Part of the special deal is that he's also available for "FREE" One-Day shipping for Amazon Prime members. Order - Read More
If Optimus instead followed Prowl’s plan, he instructed his troops to transform into vehicle mode and play dead. The Decepticons, believing the Autobots’ ruse, disarmed themselves in order to carry out the Autobots’ “carcasses.” Now with the element of surprise against unarmed opponent, the Autobots Transformed and were able to easily defeat the evil robots.
In the Japanese exclusive Transformers: The Headmasters storyline (which replaced the "Rebirth" finale in Japanese continuity), Hot Rod appeared as part of Optimus Prime's inner circle. When Galvatron and his Headmaster warriors launched a devastating attack on Cybertron, Vector Sigma was damaged, and Hot Rod was sent to Earth to retrieve the Matrix. Recovering it, he returned it to Prime, only to be surprised when the ghost of Alpha Trion once again reformatted him into Rodimus Prime to help Optimus. After Prime's second death, Rodimus once again took command of the Autobots. However, when Scorponok destroyed Vector Sigma, Rodimus decided to leave the war, and left Fortress Maximus in command of the Autobots.
In a break from tradition, Energon Optimus Prime's large mode resembled a configuration similar to Voltron or to the Super Sentai action figures. This design was unpopular with many fans due to design issues with the toy. The small robot's body was large in proportion to his arms and legs which made the figure appear fat, earning it the nickname "Fatimus Prime" or "Obese-imus Prime". The 4 vehicles that combined with the robot were small, lacking the intricate detail that made other toys in the line popular. Fans were also angered by early releases of this toy in which the head was molded with a mouth rather than the traditional face plate design. Later releases of the toy eliminated the visible mouth feature.
China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More
Eject lamented that all the great and famous Cybertronians, including Optimus Prime, were long gone by the time Cybertron was controlled by the Builder Assembly. Broken Windshields The Maximal Overshoot experienced a series of visions from Cybertron's past after discovering the Oracle, including Optimus Prime launching the Ark during the Great War. Cultural Appropriation
A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.
Categories: Unreleased toysUpcoming toy releasesArticles in need of imagesAction MastersAlternators AutobotsAlternity AutobotsAuthenticsBot Shots AutobotsClassics AutobotsCloud AutobotsCombiner WarsCombinersConstruct-Bots AutobotsContest prizesConvention exclusivesE-HobbyGeneration 1 AutobotsGeneration 2 AutobotsGenerationsGeneration 2 Go-BotsGT charactersHenkei! Henkei! AutobotsKiss Players AutobotsMachine Wars AutobotsMail order exclusivesMasterpieceMusic LabelPlatinum EditionPower of the PrimesPowermastersQ-Transformers charactersReturn of Convoy AutobotsRobotmasters AutobotsSDCC exclusivesTimelines charactersTitanium SeriesTitans ReturnToys "R" Us exclusivesTransformers with three modesUnite Warriors AutobotsUnited AutobotsUniverse (2008)War for Cybertron: Siege
Timelines Rodimus is a BotCon 2008 exclusive recolor of Classic Rodimus in black that is based on Black Rodimus. An evil alternate version of the Generation 1 character, according to the comic writers his personality is based on Vinnie Barbarino from the TV series Welcome Back, Kotter, using variants of Vinnie's famous put-downs. His new appearance has inspiration from the facial hair of parallel universe Mister Spock from the Star Trek episode "Mirror, Mirror".
Hot Rod would make his first IDW Publishing appearance in a Spotlight issue focusing on him. In this, he was shown to be newly promoted to command of a group of Autobots including Gizmo, Backbeat and Dealer, who had been sent to secure the Magnificence, a device of some sort that could predict the future. Getting past the guardians, Hot Rod was swapping it with a fake to prevent the Decepticons from getting their hands on it when a seeming Decepticon ambush wiped out his squad. Determined to rescue the only survivor, Dealer, Hot Rod staged a daring solo rescue mission that managed to rescue Dealer - unaware that he was really Doubledealer, a Decepticon spy sent by Banzaitron to retrieve the Magnificence and now out to find where Hot Rod had stashed it.[10]
Multiple reports suggest that the toy suffers from a design flaw, inferior plastic quality, or both: Due to his hands having peg-holes that are a bit too small to accommodate 5mm posts, they have a tendency to show stress marks on the inside after pegging his sword handle (or most other pegs) inside. Stress marks also tend to appear near his tiny hinged wrists. Fortunately, there have been no reports of the hands actually breaking on either location thus far.

Entertainment Pack Optimus Prime is a slight redeco of the SDCC figure, with some deco differences between the SDCC release; this version has gray windows instead of blue and is missing some of the silver deco on the helmet and roof/feet, as well as the yellow paint on his lights. His midriff is also darker. Optimus also comes with a similarly-scaled Megatron and PVC figurines of Jack Darby, Miko Nakadai, and Raf Esquivel.
Now I'm 30, so I don't know exactly what transformer toys you grew up with, but I had a bunch of the "Beast Wars" toys. Which with my nostalgia glasses on seemed much more detailed in my memory than what these new Transformers toys look like they are advertising on their website. However searching for a picture of my Optimus Primal toy... it isn't quite as detailed as I remembered. So my point is that it is probably a bit of nostalgia making you think yours were so much better than what they have now.
Apart from this, Optimus Prime is also the weakest link of the gestalt combination, due to a number of design failures attributed to his torso mode. The square holes-and-tabs used to secure the arms together when in torso mode are too weak to remain locked in place (though a very small amount of copies can secure the arm well), and are prone to falling out of position should an attached arm be moved. The torso mode's skirt plate is also attached to the stomach rather than the pelvis, rendering the waist swivel nearly worthless due to the skirt obstructing articulation.

The percentage in the title is not a turn of phrase nor something inferred in any way, it comes from a quote by Bumblebee movie producer Lorenzo Di Bonventura. Whether Bumblebee is a prequel or reboot (or anything in between) has been a hot topic for fans , especially those who want to distance themselves as much as possible from the previous films made by Michael Bay. These debates have reached Bonaventura who sat down with Metro and explained why to him, the Bumblebee film was 100% a prequel - Read More
Though Optimus allowed himself to be destroyed when he betrayed his own moral code while playing a video game, a copy of his mind survived on a floppy disk. Years later, he was restored as a Powermaster, binary bonded to the Nebulan, Hi-Q. Optimus Prime slowly earned the respect of Decepticon leader Scorponok, mourned the loss of his friend Ratchet, and ultimately sacrificed everything to defeat Unicron. Though Optimus died again, his mind persisted in Hi-Q, and the Last Autobot was able to restore him as an Action Master in time to bring a temporary end to the war.
The figure features newly redesigned hip ratchets to make both robot and combiner mode stable, which were also installed in both TakaraTomy's Motormaster, Grand Scourge, and a revision wave of Hasbro's Motormaster. The pegs that Legends Class Rodimus (or Blackjack) attach to have also been slightly modified to provide a tighter fit, making the latter toy much less prone to falling out.
Optimus Prime is another redeco of Revenge of the Fallen Legends Class Optimus Prime, features gunmetal-stque grey plastic, and his paint operations being similar to the first Revenge of the Fallen Legends Class toy. He is also packaged with Grimlock, himself a redeco of none other than Energon Cruellock. Like other Legion-themed product, he is exclusive to Walmart in the US and Asda in the UK.
This Cybertron spin pop consists of a generic handle with an Optimus Prime sticker, topped with a figurine of Prime through which the included lollipop slots. When the handle is squeezed, a manual gear mechanism spins both the figure and lollipop—no batteries necessary! The handle was also redecoed in orange for a Megatron spin pop, with a figure of the Decepticon leader on top.
Later, Orion Pax worked as an archivist in the Iacon Archives, and was friend to Ariel and Dion. Shortly after the trio encountered a group of time-traveling Aerialbots, the Archives were attacked by Decepticons, and Pax and Ariel were severely injured. The Aerialbots took them to Alpha Trion, who rebuilt them into Optimus Prime and Elita One respectively. Golden Age The Matrix of Leadership was passed to Optimus Prime following the death of Sentinel Prime at the hands of Megatron. The War Within During the war on Cybertron, Optimus Prime came to the aid of Getaway, Joyride and Slapdash, saving them right as the Decepticons Dreadwind and Darkwing were on the verge of destroying them. End of the Road

A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.


Optimus Prime appears in the Transformers live-action film series as the leader of the Autobots and one of the main protagonists. In the first three films, he is able to transform into a conventional Peterbilt 379 cab, rather than the cab over design of his original Generation 1 body. In Transformers: Dark of the Moon, he gains a first generation-style trailer form before changing into a 2014 Western Star 5700 Concept.[29] Also straying from the G1 design, Prime's vehicle mode is now decorated with red flames painted onto a blue body à la Rodimus Prime, his Generation 1 successor. The reason for the change was due to Director Michael Bay's decree that mass displacement does not occur when they transform, requiring Optimus's vehicle form to have more mass to achieve the desired size in his robot form.
Many Transformers come with tech specs (short for technical specifications) printed on the back of the box that they are sold in. The owner of the new Transformer is encouraged to cut out the tech specs and save it. This card has information on the Transformer, and will usually include the character's name, picture, indication of allegiance (Autobot, Decepticon or other), function, a quote, a description of the character, and numerical values of the character's various attributes. Although only the numbers can be truly deemed "technical specifications", the entire card is usually referred to as the Transformer's tech specs. Each specification is rated by a value from 1 to 10, 1 being the lowest, and 10 being the highest.

Featuring a complex transformation, essentially the front and back ends of the truck fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his pricepoint has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, held in place by a simple clip.) Optimus' final Automorph, located in his torso, is activated by flipping the silver lever on his stomach activating a series of spring-loaded actions where the truck windows are pushed apart, and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
The first Generation 2 Optimus Prime toy was largely identical in sculpt to the original Generation 1 figure release. While his cab robot retained his original red and blue color scheme, his trailer was recast in black, with the original blue and silver striped sticker replaced with a red and silver one displaying Optimus's name. On the first release of the trailer, the internal components and Roller matched the blue of the cab robot. Later, the internal components were changed to a lighter blue, as was Roller. Another running change followed, making the dark blue of the cab robot match this lighter shade. A bright yellow "Autobot" tampograph was also added to the back of his right leg.
There is one aspect not looked at in the price and that is the shift to model building vs. creation leading to a change in the utility of the pieces. I seem to need many more sets to get a useful variety of pieces these days as many of the sets contain a lot of pieces that are very specific to the needs of the set and are less useful when one wants to create their own designs. It would be a fascinating addition to rate each of the block types on its utility, perhaps by its prevalence in other sets, and then assess each set on its total utility score. So then the question is how many sets would you need to by to achieve different levels of utility and how has this changed over time.
Just like Optimus Primal's basic bat toy, this figure was released during the short-lived period when the Beast Wars was still considered to be an extension of the Autobot/Decepticon war, and Optimus Primal was the same character as Optimus Prime. This was soon relegated to the realms of micro-continuity when the Beast Wars animated series began and clearly established that the two Optimuses were different characters, but the toy remains one that was officially branded as Prime, and is consequently listed here.
A Deluxe class toy of Prime in his Protoform stage. One of the first released movie figures, Prime's Entry Mode resembles a huge metallic asteroid. With this figure standing 5.5 inches tall and Optimus being 28 feet (336 inches) tall, the toy is about 1/61 scale. This rock-like alternate mode has led some fans to sarcastically refer to the movie protoform toys as Rock Lords.

Not depicted in the instructions or stock photos, Roller can attach to Prime in vehicle mode via two tabs on the vehicle front which slot into two corresponding slots on Prime's feet. Another undocumented feature is that the butt of the Ion Blaster can be inserted between the barrels of Roller's weapon mode to form a longer weapon. Also not shown in the instructions but depicted on the stock photo on the card-back is that Prime's shoulderpads can be rotated up; the intended positioning for this is notched, although you can position them at other angles.
In the first nexus, when Swoop reported back to Autobot HQ that the other Dinobots were being controlled by Bombshell's cerebro-shells, Optimus had to decide whether to stop them with an immediate full-scale assault, or consult the Ark's computer. If he led an immediate attack, the cerebro-shells were jolted loose when his troops carried out his order to, "Bring them down fast and hard". If he consulted the computer, he then had to choose between its plan to have Windcharger remove the shells from a distance with his magnetic powers, or go with Mirage's idea to lure the Dinobots over Bandit's Bluff with an Optimus Prime hologram. If he chose Mirage's plan, the Dinobots charged over the cliff and into the ocean, where they were salvaged for repairs back at base. If he let Windcharger lead operations at the bluff so he could confer with Skids about some strange activity near Dolphin's Bay, it was out of his hands whether Windcharger accidentally tore the Dinobots to bits, or harmlessly removed the cerebro-shells. The latter outcome led to Grimlock telling Optimus that Bombshell said controlling them was just part of a larger plan, and the Autobot leader realized that it might tie in to Skids's report. Skids and Bumblebee could investigate in Wheeljack's new mini-sub, but should he send Sludge along with them?

The cab is yet another iteration of the original Optimus Prime/Convoy toy, based on the Ultra Magnus retool, as distinguished by the elongated hubcap pegs on the front wheels. Indeed, the iPod-aesthetic, all-white deco would make you think this figure should be Magnus, but no, the packaging clearly says "Convoy", making it twice in one year that Takara has released a white-redeco Prime that isn't Magnus.
Optimus Prime also appears in Transformers: Rescue Bots, stated to take place in the same universe as Prime, as the leader of the Autobots who transforms into a semi-trailer truck, though unlike his Prime appearance, it's flatnosed like his G1 counterpart. He gave the Rescue Bots their mission and mainly appears mainly via view-screen, appearing physically in the first episode and then in the first-season finale, where his truck mode is seen for the first time on screen. He then returns, with or without Bumblebee, many times throughout the second and third seasons as a recurring character. In the episode "Land Before Prime," Optimus Prime arrives on Wayward Island to help the Rescue Bots. He scans Trex as a secondary form where gains a Tyrannosaurus form, making him a Triple Changer, though he states that scanning anything techno-organic might have unpredictable results. While he loses control of this "Primal Mode" at first, the Rescue Bots determine that his loss of control is due to low Energon reserves, and are able to replenish his energies and restore him to normal using an energon patch. At the conclusion of the third season, Optimus helps his old friend, High Tide, along with the new recruits, Blurr and Salvage, save Griffin Rock and subsequently sends Heatwave and his team on a new mission to use the island as "testing place" to reveal their true identities as aliens.

The first Nightwatch Optimus Prime is an extensive redeco of the previously released Leader-class Optimus Prime, replacing most of his red and blue with different shades of blue and black. In fact, he resembles the original Diaclone Powered Convoy color scheme of Generation One Ultra Magnus's truck cab. The previously blue and red flames have been replaced with silver flames, as has various other decos, replaced by copper.
Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such.[50] Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.
Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He is love, in bed.
In 2016, the figure saw re-release with the Combiner Force packaging. Being the tenth use of the sculpt at this point, some instances of mold deterioration have affected the figure, including: the vehicle front's bumper (which affects the space on the head/front bumper transformation), the headlights, and/or the legs, and the hole on the left shoulder is also prone to develop a stress mark due to the right shoulder's slightly "thickened" peg. Although the re-released badge didn't seem to unlock Optimus Prime after it was scanned, a later update to the game amended this.
Like the original Warrior Class Optimus Prime, the figure features an undocumented feature: His axe can be stored on his vehicle mode trailer. Additional features include storing the axe onto either of his leg hooks, combining the launcher with either of the swords at their hilt, and storing the launcher underneath the vehicle. In a neat bit of engineering, he can fully transform with his swords attached.

When you’re a Cybertronian robot-alien who could easily blow any human to bits if you wanted, having a license plate can’t be that important. Really, if you’re in car mode and a cop pulls you over for not having plates, and sees that you also don’t have a driver, and then perhaps sees you turn into a giant robot, what exactly is that cop going to do?
As the figurehead of the entire Transformers franchise, Optimus Prime has been on more pieces of merchandise than can be stated here. Several statues and busts of Optimus Prime as well as Optimus Prime themed objects have been released by various companies since the return of transformers to prominence, such as the "Optimus Prime Oral Care Station". Other figures released include various PVCs as part of Takara's "Super Collection Figure" line, which were later imported as part of Hasbro's "Heroes of Cybertron" series. Larger "Mega Collection Figure" PVCs were articulated and came with energy axe and gun figures.
Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.

Optimus Prime is armed with two large rifles formed out of a combination of both smokestacks and fuel tanks. These rifles peg onto his lower arms with grips for his open hands. The under-slung fuel tanks can fire spring-loaded projectiles. In vehicle mode, both smokestack rifles can be deployed as twin cannons, and this mechanism can also be used to store the rifles and deploy them as shoulder guns in robot mode.
Summer of 2017 will bring us the fifth Transformers movie, The Last Knight. It’s said that it will be a little different from the previous films; an entry point for new viewers that will help launch a series of spinoffs or stand-alone movies. And the first of those spinoffs is a Bumblebee movie, slated for release in the summer of 2018. At one point, Michael Bay said he would love to make an R-rated, Quentin Tarantino-style movie featuring Bee, but that’s not likely to come to fruition, considering how much kids love the character.
The 1984 and 1985 toy lines contained several figures of note. Megatron, the Decepticon leader, originally transformed into a realistic Walther P38 pistol with stock and barrel extensions and scope. The Megatron toy was delayed till 1985 for release in the UK. The Constructicons were the first "gestalt" team in the Transformers line, but were different from most subsequent gestalt teams in that they consisted of six members instead of five. The Autobot Jetfire was repainted from a Macross toy, specifically the VF-1 Valkyrie, and the character was renamed Skyfire in the animated television series program for copyright reasons.
TakaraTomy released another reissue based on the Encore version as part of their Chronicle line in 2011, lacking the original Generation 1 trailer. Instead, the Chronicle version was available in a two-pack with Dark of the Moon Deluxe Class Optimus Prime and a new trailer that could be used by both Optimuses, thanks to a retooled trailer hitch on the Generation 1 Optimus Prime figure.
Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster, a Barrage cannon, two retractable energon blades that extend from his forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, and two retractable energon hooks that extend from his wrists. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.
For the Generation 2 toy line, the original Optimus Prime toy was altered somewhat and an electronic sound maker was added.[24] Later Generation 2 toys of Optimus were completely new designs, such as Combat Hero Optimus Prime, Laser Optimus Prime, and Gobot Optimus Prime, who could become a red Lamborghini car. In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film.[25] In 2006, Hasbro introduced Alternators Optimus Prime, which turned into a licensed 1:24 scale model Dodge Ram SRT-10.[26] In 2011, Takara Tomy released MP-10 Convoy, a smaller, more show-accurate version of the Masterpiece Optimus Prime figure.[27]
While exploring Cybertron's hemisphere of darkness, Optimus Prime became severly damaged, and unable to return to the hemisphere of light. Having been able to send out one last message before his memory was badly damaged, Optimus found himself unable to distinguish friend from foe, and would join (or rejoin) whichever faction found him first. Optimus Prime Is Back
The original Hasbro stock photos depict him as having red paint operations on his kneecaps and the sunken ridges around his blue abs that the final product lacks. The photos on the cardback show him with a red Autobot symbol on his truck door and blue plastic instead of grey for the piece just in front of his rear tires. The back photo also depicts his side windows as being the same translucent orange as the front ones, when they are, in reality, a garish solid orange.
Naturally, Optimus Prime got the biggest of the sets in the first year of Kre-O. The set can be built into a large long-nose tractor-trailer rig with a removable "sleeper" cab that hides a computer station, and a trailer that can carry the set's two motorcycles or open up to carry larger car builds. The robot mode build includes a huge Optimus, based largely on the live-action movie Optimus, though with a head based almost directly on the Classics Voyager Optimus. He is armed with a distressingly plain brick that fires pressure-launched missiles (aka his smokestacks). Most of the leftover parts in robot mode become a "headquarters" which is mostly just a random assemblage of mismatched-color panels and a pair of barricades. Both main builds leave numerous parts unused if you go expressly by the instructions, but hey, it's a building kit, surely you can find someplace to apply most of them.
Asia Premium Series Optimus Prime Ultimate Edition is an extensive screen-accurate redeco of Jetwing Optimus Prime (with a maskless head from Buster Optimus Prime), this figure features loads of accessories from the Striker & Jetwing figures, and includes brand-new knuckle and battle hooks based on the HFTD Optimus', which can be installed in either hand. The figure lacks the chrome of previous releases, instead opting for silver paint. The pin-striping is also absent, but he does have painted pupils. The figure also features 2-2-1 articulated fingers, which the first Leader Class did not have due to budget cuts. The ion cannon included lacks the black paint application, leaving it completely silver. When purchased from select retailers, this toy will also include a shiny metal number plate and a bonus mini AllSpark cube accessory. His instructions depict a weaponised mode which has some clearance issues, as his Gatling guns are shown attached to the jetwing, which pushes against his arms. His Eliminator Gun and Assault Blaster cannot tab into the Gatling gun tightly either.
Unite for the Universe Optimus Prime would have been a redeco of the 2007 Optimus Prime Voyager-Class mold in a similar style to the Leader-Class Buster Optimus Prime (see below), with a much more accurate and detailed paint scheme, including white stenciled flames. He would have come with a set of Jetfire armour parts to form the powered-up Optimus Prime seen at end of Revenge of the Fallen, and due to not having to form Jetfire's robot mode or his jet mode, the armour parts are far more accurate to the movie's design of them than the leader class Jetfire toy could manage. While not combined to Optimus Prime, the armour can be arranged to form a sort of weapon emplacement mode or a jet engine on the back of Optimus's vehicle mode.
"Hero Mashers" Optimus Prime, Bumblebee and Grimlock took on Megatron in the middle of a busy city. Optimus came to Bumblebee's help while riding atop of Grimlock, swapping heads with his mount to bite Megatron's arm off, getting a hold of the Decepticon's jetpack at the same time. He attached both pieces to himself, and flew around for a bit before returning to the battle. He thoroughly scrambled his pieces with those of his teammates, then took down Megatron with his "dino-fist." Afterwards, the Autobots returned to their normal configurations (though it took them more than one try to do so!) Hero Mashers commercial
In the forest, Trailer observed the lost Red Jet and Yellow Sports Car. He wondered why Red Jet didn't just fly out. The Story of the Lost Plane! Trailer later played in the Quiz! BeCool show with Tank Lorry on his team. The two's answer fumbling and arguments led them to lose the game. Another BeCool, Garbage Truck (清掃車 Seisōsha), was part of one question. The Story of Quiz! BeCool While Yellow Sports Car was explaining BeCool marks to you, Trailer was asleep in his Trailer Base, appropriately displaying his "Zzz..." BeCool mark. The Story of What Do I Know About the BeCool Mark?
When a two-part race was being held with a massive supply of oil and gasoline as the prize, both the Decepticons and the Autobots badly wanted to win it. Megatron entered the race by hiding himself inside a hollowed-out car and harassed Cliffjumper all throughout the contest. When Prime discovered the car was being driven by his arch foe, he swiftly pulled a telephone pole out from the ground and used it to bash the mortal hell out of the cheating Decepticon. Thanks to Prime's violent intervention, Cliffjumper was able to win the race. Afterward, Optimus Prime celebrated the Minibot's victory with a gargantuan smile as all the Decepticons starved to death. The Great Car Rally
Kiss Players Convoy is a redeco of Alternators Optimus Prime. While the figures may appear similar at first glance, given that Kiss Players Prime is still red, blue and black, there are many subtle differences, not least of all the replacement of the Alternators figure's bare, flat red plastic with a deep metallic red paint. Several of his body parts are cast in different colors of plastic (for example, his shins, formerly black, are now blue, while his formerly-blue hands are now black), and he features more intricate paint applications on his shoulders, and especially his pelvis, which is decorated to look like Prime's traditional bumper.
Being a brand new and intricate remake of the Autobot leader, MP-10 was used as the gold standard in terms of scale for future Masterpiece figures, with all the upcoming releases being sized to best match him. Much like his older incarnation, he was also cherished by collectors, generating heated debates on which version is the best one up to this day.[5]
Available exclusively through e-Hobby, this black and teal repaint of Hybrid Style Convoy features the traditional "Nemesis Prime" color scheme, but represents a version of Optimus Prime himself. In addition to all the original accessories, the toys also includes several more deliciously metatextual goodies, themed around the Generation 2 toy and comics: two new large guns patterned after the new weapons wielded by the Generation 2 Optimus Prime toy, and two additional (blue) Prime heads that can be swapped with the figure's regular noggin, sculpted explicitly in the style of Generation 2 comic artist Derek Yaniger. One head is pristine, the other decorated to match the battle damage seen on the cover of the first Generation 2 issue.
After a long period of stalemate, Prime grew frustrated at the lack of progress his troops were making against Megatron's forces. To remedy the situation, he ordered the creation of several new Transformers who would be perfectly adapted for combat on Earth. The first among these was Pirhana. Piranha's The Official Transformers: Generation 2 Annual profile But one of the Autobots' great victories came not through superior numbers or firepower, but trickery and cunning. As part of a plan devised by Optimus Prime's new second-in-command Prowl, the Autobots allowed Starscream to "overhear" that they had uncovered an ancient Cybertronian ship with the means to return to Cybertron. They then stationed themselves around the vessel, atop of Table Mountain in Africa, and awaited the inevitable Decepticon attack over its possession. Optimus met Megatron in battle, but ordered his troops to withdraw after a brief skirmish, declaring the Decepticons too powerful to hold back. Once the Decepticons claimed their prized and entered the ship, they found themselves locked inside it. The ship then shot up away from the planet, leaving the Decepticons without the means to control it. Though the Autobots knew this wouldn't rid them permanently of the Decepticons, they were satisfied with a brief period of calm while they were off-world. Day of the Decepticons

On a mission with the Triggerbots to stop Megatron from claiming the Underbase, Prime was forced to jettison the massive databank into space to prevent anyone from acquiring its power. With this action, he proved his wisdom and skill to the Autobot Council of Elders. He continued to move up in rank, eventually becoming the field command over the Autobot armies.
The main build of the set is a massive vehicle based on Optimus's truck cab, capable of seating a single Kreon in the driver's seat. Pushing the trailer-hitch on the back end towards the cab opens up the front grill, revealing a huge spring-loaded rocket launcher with rubber-tipped projectile. The cab can also stow the included stasis pod ussed to lock away the baddies.
This Walmart-exclusive redeco and retool of the 2010 Transformers toyline "Battle Blades" Optimus Prime toy features the Japanese release's hooks (instead of swords), plus an all-new mouthplate-less, mouthed face. As part of the set's lunar theme, reflections of stars are painted across his vehicle mode sides and on his windshield, with a sharp reflection of Earth's Moon in one of his windows. This time, his Matrix of Leadership is cast in orange plastic.

For reasons unknown, his ion blaster was sculpted with a large, rectangular handle, requiring accommodating fists. In order to make use of the other weapons in the line (like his own rocket launcher and the solitarium weapons), he comes with an extra pair of replacement fists with smaller, circular peg-holes. This replacement-fist method is also used to plug in his clear-plastic energy axe.

Optimus Prime features a MechTech Blaster that can convert into an Energon Battle Axe reminiscent of the Generation 1 character's iconic weapon, though the weapon cannot be locked in battle axe mode. There is also a pair of C joint rods on the underside of both forearms. His MechTech blaster can plug into the port on each of his arms or be held in either hand in robot mode, or plug into one of two holes on his truck roof/robot shoulders.
Although peacetime in the decade that followed the apparent deaths of Unicron and Galvatron afforded Prime the opportunity to train his own elite squadron of Autobots the martial art of Kumite. The re-emergence of the war, however, forced him to return to his role as commander. The conflict for control of the Mini-Cons and the truths he was forced to face in his confrontation with Unicron seems to have changed him. Optimus Prime, Grand Convoy' in the Japanese version, was now a stern, more direct commander and shows little of the conflict that held him back before. Despite this, he is still known to make the same kind of decisions, which include an emphasis on team work and the foundation of the Autobot values.
Through the years, there have been many action figures made in the likeness of the original incarnation of Optimus Prime, some of which have been featured in fiction, others of which have not. Additionally, some toy makers have made unlicensed toys in his image or accessories for the existing toys. The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[23] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the Transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original Transformers toy line.
The 2010 Transformers "Reveal the Shield" Legends Class Optimus Prime sculpt in the deco from the first Chronicle EZ Collection wave (see below) was released as a "Dollar Store" exclusive (available at stores such as Dollar General and Big Lots) in generic 2010 Transformers packaging packaging alongside Starscream, Bumblebee and Megatron. The initial release saw the copyright year removed, while a later running change variant featured the new tooling originally used for Generations Legends Class Motorbreath, with not only the retooled hands and a hole on the back of his head/top of his vehicle mode compatible with 3mm posts, but also Motorbreath's sword accessory.
Later, Orion Pax worked as an archivist in the Iacon Archives, and was friend to Ariel and Dion. Shortly after the trio encountered a group of time-traveling Aerialbots, the Archives were attacked by Decepticons, and Pax and Ariel were severely injured. The Aerialbots took them to Alpha Trion, who rebuilt them into Optimus Prime and Elita One respectively. Golden Age The Matrix of Leadership was passed to Optimus Prime following the death of Sentinel Prime at the hands of Megatron. The War Within During the war on Cybertron, Optimus Prime came to the aid of Getaway, Joyride and Slapdash, saving them right as the Decepticons Dreadwind and Darkwing were on the verge of destroying them. End of the Road

The figure also features a hollow trailer (which also serves as his legs), fit for the Warrior Class-sized toys. The trailer can also be converted into a battle station. Because of the toy's design & transformation, he is kinda show-accurate. Optimus also features 5mm-compatible ports on his trailer, arms, shoulders, legs, knees, waist armor, and the pop-out Decepticon Hunters. He also includes many weapons, including his axe with a short handle. The included weapons can also be combined with the Decepticon Hunters into a dual-bladed weapon. All of his included weapons can be wield by any Warrior Class figures, although the accessories are associated with Bumblebee, Grimlock, Sideswipe, Strongarm, Jazz, & Drift.

This reissue of the original Generation 1 Optimus Prime figure comes in a two-pack with the Deluxe-Class Dark of the Moon Optimus Prime figure. Prime himself is almost identical to the Encore release, save for his trailer hitch which was retooled to allow a peg to be inserted within it while still being able to be inserted into the trailer itself (making it compatible with his G1 trailer and the new trailer included). Like the Encore release, he features lighter colors and tampographed shoulder symbols (which vary slightly from the Encore release).
Part of the first wave of the 2015 Robots in Disguise line, Optimus Prime is a smaller-scale toy. He transforms from robot to trailer/truck combination and back! Like every Robots in Disguise Legion Class toy, Optimus features 3mm posts on his hands and arms. Due to the size and simplified transformation, he ends up having 6 wheels instead of 10. His scannable Autobot insignia is on his robot mode left shoulder. However, the badge is completely impossible to scan in vehicle mode.

Optimus led the search for the AllSpark through space, but he and his troops were unable to locate the artifact. Though the search seemed hopeless, Optimus assured the others that they would not give up until Cybertron's last hope for survival was found... At that moment, a strange green pig crashed through one of the ship's windows, with the AllSpark in tow. Optimus stared in bewilderment at the strange creature as it asked for a ride back home. Hard Boiled
After weeks of Decepticon silence, Optimus Prime decided to get proactive and sent out patrols all over the planet to try and flush the villains out. None of the patrols reported back with any success, however, and Prime realized that there was one area of the planet that his troops had deliberately ignored: the mysterious "Nebulos Triangle". Quickswitch, Scoop and Quickmix were sent into the Triangle, and they did indeed discover and foil the Decepticon plot going on in the area. Decepticons Underground
Released in the latter stages of the Cybertron toyline, this redeco of the Leader-class Optimus Prime figure introduced a new colour scheme that several other tail-end releases would emulate. Taking its name from the Japanese version of Cybertron and with a bio noting that this new body depicts Prime after he embarks on his galaxy-spanning mission at the end of the Cybertron cartoon, "Galaxy Force" Optimus Prime replaces the original toy's blue parts with black and the translucent blue with smokey clear, and moulds several—but not all—grey parts out of red plastic, including the toy's rifles, rail gun covers, missile launchers, and Super Mode leg guns. In the realm of new paint operations, Prime now sports all four Cyber Planet Key symbols on his shoulders, and his unique Matrix-shaped Cyber Key (now with the code lo9x) finally has a gold-painted border, as it had always had in Japan. Additionally, Prime's hip joints were tightened up with this release, making it easier to stand him up in Super Mode.
The TakaraTomy version, part of the first wave of Movie Advanced Series toys, is dubbed "Classic Optimus Prime", and opts for a deco closer to Prime's previous on-screen appearances, omitting the blue paint on his feet and hands to reveal the gray plastic underneath, and adding new paint details all over. Instead of painting it in clear light blue, his light-piping eyes is neutered with opaque light blue paint. In terms of quality control, at least one sample has missing it's silver paint on the head's left cheek.
Sure enough, in 2009, when the Hytherion's colossal claw-marks appeared on planets throughout the solar system, Prime's other-dimensional incarnation returned, bringing with him a "Vibrant Red" Vector 109 auto-avatar with which Prime fused. In that instant, he was reborn as part of the Alternity, a manifold being who encompassed all the different incarnations of Optimus Prime through the multiverse at once. Prime reached his hands heavenward and peeled back the layers of reality, exposing the gargantuan fanged maw of the Hytherion looming above the Autobots. From Here to Alternity
In a completely different scenario, Optimus agreed to Prowl’s plan to go on the offensive and try and discover the full extent of the Decepticons’ plans. Optimus nominated Prowl, Bumblebee and Mirage to go along with him on the mission. The group refuelled with the gas that Sparkplug brought back from the Autobots’ secret storage area, and took off. The group soon happened upon the Decepticons’ lab in the middle of a barren, polluted wasteland.
GT-R Prime was racing against GT-R Saber and GT-R Maximus when they were rudely interrupted by GT-R Megatron, a ruthless racer out to prove his worth by defeating all others. A fight broke out, but Prime interrupted it and convinced Megatron that they all shared the same need for speed, persuading him to settle things with a race instead. Transformers GT: Mission GT-R
This Japanese-exclusive vacuum metalized golden redeco of Super Base Optimus Prime, whose name means "Shining Golden", was available as a prize in several draws, including a colouring contest held in the pages of TV Boy magazine, and in-store lottery draws at Tobu Department Stores. Between the draws, at least 58 "Kinpika" Prime toys are known to have been given away, making it one of the more widely available Lucky Draw figures, comparatively speaking. It came packaged in a plain white box, and including all the accessories and features of the standard release of the figure, including a gold-chromed Sparkplug (or "Prime", as he's confusingly known in Japan).
Hot Rod appears in All Hail Megatron , while traveling through space by himself, he found himself under attack by the Torment, a Decepticon warship crewed by Bludgeon and the Pretender Monsters. He was shot down, but managed to transmit a distress call to the Autobot starship Trion, which came to his rescue. After the Decepticons were chased off, Hot Rod joined the crew of the Trion. When the Decepticons' galaxy-wide assault hit, the Trion was shot down over Cybertron. Hot Rod sent out a distress signal and was ecstatic when he ran into some other Autobots. Hot Rod was taken back to base and relayed the story of how he and his other crew-mates from the Trion arrived on Cybertron, having been diverted there by Decepticon ships and forced to crash land. Once on the surface, Hot Rod sent out his distress signal and was so sure someone heard it. Kup arrived with the rest of the Trion's crew at that point, just in time to tell Hot Rod of course no one heard his message. After the Autobots narrowly avoided the Insecticon swarm and Sunstreaker sacrificed himself, Hot Rod jumped to Drift's defense when he was being insulted by Bumblebee. When the Autobots were later rescued by Omega Supreme, Hot Rod was glad that he sent out the distress call. He was then ferried to Earth with the other Autobots aboard Omega.
Just like Optimus Primal's basic bat toy, this figure was released during the short-lived period when the Beast Wars was still considered to be an extension of the Autobot/Decepticon war, and Optimus Primal was the same character as Optimus Prime. This was soon relegated to the realms of micro-continuity when the Beast Wars animated series began and clearly established that the two Optimuses were different characters, but the toy remains one that was officially branded as Prime, and is consequently listed here.
×