Alternators Optimus Prime transforms into an accurate 1:24 scale Dodge Ram SRT-10. The vehicle mode features rubber tires, functional steering, opening hood, tail gate and doors with a detailed cabin interior. Several of the details of his robot mode body are based on the sculpt of the 20th Anniversary Optimus Prime figure, but the head itself shares more similarities with the Powermaster mold. He is armed with a small pistol which transforms into his vehicle mode engine.
Featuring a complex transformation, the front and back ends of the truck essentially fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The halves of the rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his price point, he has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, as it is held in place by a simple clip.) Optimus's final Automorph, located in his torso, is activated by flipping the silver lever on his stomach, activating a series of spring-loaded actions where the truck windows are pushed apart and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point, yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
Available exclusively from Japanese clothing company A Bathing Ape in 2017, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a unique black color scheme matching the Convoy Reissue BAPE Ver. BLACK of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
Menasor cut off Prime's escape and handed him the Reflector trio, who confronted Prime with a hologram of Serpent O.R. The new Decepticon leader carried Megatron's memories and information downloaded from Soundwave, from which he learned of the Matrix of Leadership. Serpent O.R. offered Optimus a trade: hostages and peace if he handed over the Matrix. Optimus agreed.
If Perceptor gave out the right amount of an antidote, the poisoned Autobots were cured. Optimus ordered his troops to ready themselves for the incoming squadron of Decepticons. Perceptor’s antidote did have a side-effect on the Autobots, however; it gave them a fierce battle-fever, making them eager to take on the Decepticons head-on. Prowl suggested to Optimus that they instead opt for a more conniving counterstrike against the Decepticons, and ambush them instead.

After the Decepticons declared war, junior officer Optimus managed to turn the tide against them in a battle over Iacon, and rose up in rank to become Autobot leader. Optimus Prime's The Official Transformers: Generation 2 Annual profile His second-in-command, Jazz, once saved his life after a surprise attack rendered him him temporarily non-functional on the battlefront. Jazz's The Official Transformers: Generation 2 Annual profile The war raged for centuries, with Cybertron's fuel sources steadily decreasing. Optimus ordered the construction of the Ark to seek out new sources of energy, unaware that Megatron was building a ship of his own. The Ark's first foray into space was interrupted by a Decepticon attack, and all involved were too distracted to notice as they entered an asteroid belt. A collision between two meteorites sent the Transformers crashing into Earth. After countless eons of slumber, the Autobots awoke to a world populated by humans, and once more took up the fight against the Decepticons. From Cybertron to Earth the War Continues...
Forming a roughly 11-inch figure when fully assembled, Diablock Convoy is highly articulated, save for his head, which is only able to move up and down. Said head is also by far the most stylised aspect of the figure, with no real attempt to approximate Prime's face or mouthplate, instead featuring only a reversed block that gives the odd impression of a cycloptic eye. It is possibly intended to actually represent his forehead grill, as a yellow block inside his head construction remains barely-visible through a slit in his face, possibly intended to represent the classic toy's yellow eyes.
A very limited number of Gold Masterpiece Convoy figures were given away in a Lucky Draw contest in Japan. The figure uses the same design as Masterpiece Convoy, but every piece, including the windows and weapons, is cast in a gold color, reminiscent of his electrum coating from the episode The Golden Lagoon. The only exception is the tires, which remain black rubber. It comes packaged in the usual Masterpiece Convoy box, with the only telltale sign being the gold lettering in the "Master Piece" label. It's not clear how many were made, but it is thought to be no more than 10 or 20.[1]
The Heroes of Cybertron PVC figurine line is an adaptation by Hasbro of Takara's own Super Figure Collection line. The main differences between the two lines is that Hasbro cast Autobot and Decepticon figures in clear blue or clear red PVC respectively, then completely painted the figurines. This allowed the eyes to 'glow' when placed in front of the light source.
Hot Rod identified the Decepticons on board through the damaged hull and immediately attacked the targets within using low powered, rapid fire bursts. When the Decepticons returned fire, Hot Rod changed tactics and began firing more concentrated blasts at the shuttle itself. Eventually, he managed to disable the shuttle. With their cover blown, Megatron ordered his forces to attack and the Decepticons began pouring out, beginning their planned assault on Autobot City. Before focusing his attention on the onslaught, an incensed Megatron destroyed the observation platform on which Hot Rod and Daniel were standing. True to his protective Autobot instincts, the first concern of Hot Rod was for the safety of Daniel. Quickly shielding the young boy, the two survived the platform collapse but were soon cornered by Blitzwing and Shrapnel. Timely intervention by the old and experienced Autobot Kup diverted the cannon fire from Blitzwing and allowed the three of them to escape.

Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster, a Barrage cannon, two retractable energon blades that extend from his forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, and two retractable energon hooks that extend from his wrists. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.
Star Convoy was reissued by Takara in 2005, with some notable alterations to his deco: his white plastic was replaced with metallic silver, and the yellow star on his chest was chromed golden. Star Convoy himself retained some of his original decals but most notably his "simulated head lights" and "wind shield panels" were stamp graphed on him, similarly, Hot Rod's were replaced with the same stamp graphing applications. Additionally, where the original toy had been packaged in robot mode in a tall box decorated with the standard Japanese package art of the time, the reissue was packaged in vehicle mode, in a long, wide box more reminiscent of the original Generation 1 toys.
The figure seems to have some transformation scheme & design related problems in it: The front truck cab's upper two pieces are supposed to be pushed to the front in robot mode, but the piece keeps collapsing back due to looseness when the figure is standing straight (Though pressing the two halves together firmly tends to reduce this issue for a while), while the tab underneath the truck grill does not connect well with the bottom port. Additionally, his 5mm compatible hands have a slight problem with wielding weapons with short 5mm posts.

The only differences with the unreleased version, aside from the packaging, are that silver paint has been added to the previously unpainted grill/fender area, the blue paint operations have been changed to teal, and the red Autobot insignias have been replaced by purple Decepticon ones. Prime's bio apparently explains that he took on this new color scheme in order to infiltrate the Decepticon ranks, in response to recent attacks by some new Decepticon forces pretending to be Autobots.


It uses the 1985 post-rub mold, no metal plates, and the trailer's launcher fires short(this can be modded with some disassembly, Toy Polloi has a video showing how). The wheels roll a bit iffy, this is a common documented issue. Personally I believe there is a slight molding error in the robot, the legs do not seem to fold down quite as far as an official cab's legs do, causing a very slight lean backwards.

One more thought: LEGO is a Danish company. The fluctuations in the price of LEGO such as the big bump around 1985-7 in Figures 1 and 2 could be because of a change in exchange rates. The conversion rate between the Danish Kronor and the US$ went from over 10 in 83 and 84 to less than 7 in 86 and 87. LEGO might have been slow to respond to changes in exchange rates, leading to the temporary bump. If you’d like to share data we can redo your graphs in DKK.
The First Edition Voyagers were never released in the US, forcing buyers to import him from Canada or Japan... at first. ToysЯUs later picked up this toy, along with most of the "First Edition" line, as part of a huge block of US market exclusives for holiday season 2012. This second run introduced a deco variant, in which the red paint on, beside, and below the truck side windows is omitted, revealing the patch of brown plastic underneath. As he is packaged in robot mode, with his front wheels and shoulders covering said patch, the only way to identify which version is which while in the box is by looking at the hinge joints beside his two painted torso lights, with the center portions of the hinges being unpainted brown on the variant. All releases of this mold also have a minor issue with the truck mode windvane/robot mode heels refusing to connect solidly to the truck cab in vehicle mode, leaving a visible gap above Prime's windshield.
I understand what you’re saying. You want it to be like the Cybertron games of making them look less earth but still have the colors and molds of G1. Because I never knew that G1 actually had their vehicles molds in their Cybertron Alt Molds. I thought that was so stupid having earth vehicles parts on Cybertron. But they had to make the G1 fans and Bay fans happy so they took the cartoon and modernize it with some bayism look. I think they did good but I can see some parts being better.
This, of course, is all secondary to the main draw of the figure: it pulls an all-white trailer, which transforms into a working iPod speaker dock by rotating a substantial wedge of its full length 90 degrees . The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer. Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor with advice from an electronics specialty shop is recommended.
Hot Rod is featured again in Maximum Dinobots. Returning to Earth to continue his search, Hot Rod arrived at the gates of the Machination's complex, and Scorponok prepared himself to deal with the intruder. Unfortunately, Hot Rod found himself fighting well out of his weight class as he was man handled by Scorponok, who cheerfully bashed his face in, put out one of his optics and snapped his leg. The Headmasters dragged him into Scorponok's control room where, with absolutely no prompting, the big man explained his entire plan for the Dynobots, Skywatch and the Machination. Hot Rod seemed less than impressed with this rather mundane approach, which ticked Scorponok off enough for him to point out that it was obviously just the first stage in his master plan. He was also warned to remain awed or he'd be of no further interest. When the Dynobots and newly arrived Monsterbots seemed to turn Scorponok's plan on its head, Hot Rod burst out laughing, at which point, Scorponok ordered him taken out and shot. In the lift to the surface, Hot Rod suddenly erupted in flames, killing his captors, but draining his power supply. Weakened and with a crippled leg, he collapsed on the floor.
In 1986 the Transformers animated movie had been released, and during the run of the movie, through a pamphlet that came with certain figures, you could order certain Transformers through the mail, such as Optimus Prime among other toys. The toys came in a standard brown mailer box, with items, booklet, and a limited Edition Movie certificate and sticker.

Part of the fifth wave of 2012-onwards Generations Deluxe Class toys, Thrilling 30 Orion Pax is a new mold with a robot mode inspired by Guido Guidi's design for the character, originally seen in Spotlight: Blurr. Some liberties have been taken with the original concept to facilitate his truck mode, which is a new design not based on the Guidi art. He comes with his Ion Blaster and an Energon Axe with a transparent red-orange blade, both of which can peg onto 5mm ports on his hands and vehicle rear sides. Although not depicted on the instructions, the Ion Blaster can also peg into the hole in the larger blade of the Energon Axe.
In 1984, a volcanic eruption re-activated the Ark, which, in turn, brought the Transformers back on-line. Prime led the Autobots in their opening battles to prevent the Decepticons from plundering Earth's resources, but, following their initial victory, the Transformers were all deactivated by Shockwave. Shockwave killed Prime and leeched the energy of the Creation Matrix from his mind. He used this energy to give life to his creations, the Constructicons. Shockwave was unaware that the Matrix was not just a program in Prime's mind, but a physical object in his chest. Before Shockwave could give life to Jetfire, his next Decepticon, Prime transferred the Matrix energy into the mind of Buster Witwicky. Buster used the energy to turn Jetfire on Shockwave, allowing Prime to reclaim his body and retake leadership of the Autobots. As a reward, he gave Jetfire true life.
The Diaclone Powered Convoy figure had several additional features and modes which were mostly excised or left unmentioned for the Transformers release of Ultra Magnus. Principally, Powered Convoy came packaged with "Powered Buggy", who was left out of Magnus's release (see notes below for further details). Omitted from Magnus's instructions is the ability of his chestplate and super robot head to combine to form a small vehicle; the Powered Convoy version of the figure included small rolling wheels on the underside of the chestplate which were removed for Ultra Magnus. Additionally, three additional modes were included in the Diaclone instructions that Hasbro left out: a "preparation base" mode and an "Autobot base" mode were excluded entirely, while the third, a "catapult launcher" mode originally intended and proportioned to accommodate the Diaclone Jet Robo figure that became Starscream, was shown only on the front of his packaging, interacting with Silverbolt. The Japanese release of Ultra Magnus—released as part of the Scramble City sub-line—did include instructions for the preparation base and catapult launcher modes, but replaced the original Autobot base mode with a new configuration.
The use of a G1-based Orion Pax design and an Aligned-based Optimus Prime design with Movie Optimus Prime packaging art makes it hard to know where on the wiki this should go, but given the general movie-themed bent of the Tribute line, we're putting it here. Continuing the tradition, the 2-pack was first released in some Asian countries like Taiwan without any prior announcement from Hasbro itself. A few months after the 2-pack's release, Tribute Optimus Prime & Orion Pax saw worldwide release through Amazon, including an Amazon Japan listing bearing a The Last Knight ID number.
Optimus Prime is a redeco of Revenge of the Fallen Optimus Prime with predominately red forearms and red/silver thighs, which it was meant to be a Generation 1-inspired deco. He comes bundled with redecos of The Fallen, Megatron, Jetfire, and Starscream in a Kmart-exclusive five-pack. To date, this is the only Hasbro release of this figure that acknowledges the combining feature between Jetfire and Optimus Prime.
China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More
×