"But," we wondered, "How do you listen to music if you're constantly throwing this little robot?" The answer is wireless Bluetooth headphones. Here's a thought: When the music-listening technology that comes with today's yo-yos is cooler and more advanced than the music-listening technology that came with portable CD players in our day, the youth of today officially rescinds its right to ever complain about anything. Ever.
1· To calculate the average price per piece in a year, I took the price per piece of each set made that year, multiplied it by the number of pieces in the set and then averaged all the weighted prices. I used a weighted average because when we are looking at the price per piece we are essentially saying we could buy x number of pieces for y dollars. Larger sets tend to have a lower price per piece so in effect you could get more pieces at that lower price that year. Note: this was done using US retail price data from Brickset.
Early in the war, when he was still known by the name Orion Pax, the Autobot who would one day be known as Optimus Prime was ordered by Zeta Prime to escort the Decepticon Prisoners Wrack'n'Ruin in a prisoner exchange, while accompanied by Nightbeat and Alpha Trion. As the group made their way through the Rust Spot, they encounter Slicers and had to fend them off. Orion Pax and his group eventually made it to their meeting spot with the Decepticon Bludgeon, only to be ambushed by the Decepticons. In the confusion, Alpha Trion was taken prisonner, and Orion Pax set off to rescue the elderly Autobot. He and Nightbeat succeeded in returning Alpha Trion under the protective custody of Zeta Prime, but Orion was himself captured in turn. Strapped to a shuttle aimed to crash into Iacon, Orion's fate seemed uncertain. Orion's Gambit
Each of his kabuto helmets forms the head for one of the two combined modes. In addition, either of his kabuto helmets can be connected to his robot mode back (allowing his swords to also be stored on his back), and both can be connected to the rear of his train mode simultaneously. In robot mode or combined mode, his kabuto helmets can be held individually as a shield or combined into an even larger shield.
In a world where the Transformers' war settled into a series of friendly competitive races known as the Transformers GT, Optimus Prime became the GT Transformer known as GT-R Prime. As a racer he was known for his serious but sometimes hot-blooded personality and his skillful use of the Impact Wrench Gun, though he maintained an honorable policy never to fire directly at an opposing racer's body. Like other racers, GT-R Prime put a limit on his own strength by separating his Matrix into a GT Sister, creating his partner Misaki.

Released as part of TakaraTomy's Transformers Movie The Best toyline to conclude the 10th anniversary of the live-action film series, this Optimus Prime is an extensive redeco of his Evasion mode toy. He also uses the faceplated head and the dark gray-colored Ion Cannon used for the Evolution 2-pack/Platinum Edition 5-pack release. While his deco had taken cues from both the TakaraTomy release of Evasion Mode Optimus Prime and the Platinum Edition Breakout Battle figure, the weathering pattern bears a similar resemblance to his rusty version of the figure. Unfortunately, this release suffers from heavy mold degradation, particularly in the form of ill-fitting tabs around the truck front/shoulder area.
Takara's release of Optimus Prime the following year made a few changes, noticeably replacing the gold paint and plastic of the Hasbro toy with bright yellow and much brighter gold. The deco has been tweaked to be a bit closer to the original prototype glimpsed in early catalogs, with yellow added back to cab Prime's feet and the cab grill painted silver, and the Super Mode's waist getting much more paint. This version of the figure was never burdened with the mobility-inhibiting shoulder tabs. Completing the Super Mode combination triggered a new clip of Prime shouting "Convoy, ready for battle!" in Japanese instead of generic mechanical sounds. Late in the run, JUSCO stores offered this toy with blind-packed "Space Galaxy" versions of the individual Destruction Mini-Con Team members, one toy per box.
Released as part of a collaboration between Transformers and Primitive Skateboarding, this figure is a black repaint of the Titans Return Powermaster Optimus Prime, with the deco somewhat resembling Nucleon Quest Super Convoy, but with some gold trims and Primitive Skateboarding markings partially designed by Primitive Skateboard founder Paul Rodriguez. He also comes with an extra ramp and skateboard accessory that resembles the one Daniel Witwicky used in The Transformers: The Movie, which Shreddicus Maximus (or any other Titan Master) can attach to. The ramp can also form Optimus Prime's gun.
In Transformers: Alliance, Optimus Prime and the Autobots aid the human soldiers after the battle in Mission City and destroy the Allspark-powered machines that were created. A trailer is obtained for Optimus Prime to carry the remains of Jazz. The Autobots leave Mission City as the Sector 7 personnel arrive to claim the remains of the Decepticons. About a month later, Epps and Lennox contact Optimus Prime about aiding them in escorting the remains of the Decepticons to the naval yard. They are spied on by Barricade, who transmitts the information to Starscream.
There are two versions of the voice changer helmet with two different pre-recorded voices. An earlier release features a voice similar to Garry Chalk, while the later release features the voice of Peter Cullen. The latter version has modified packaging under the 'Try Me!' blurb, stating it has 'Real Movie Voice!', though the updated version has also appeared in the original packaging without the 'Real Movie Voice!' notice.
At BotCon 2005, Hideaki Yoke revealed that Optimus Prime (or more accurately, Diaclone Battle Convoy) was not designed by a single person, but rather a team of Takara designers as the one who was originally assigned the job had fallen behind. It is said that a young Shoji Kawamori was also a member of this team at some point, who would design THS-02 Convoy over 20 years later. The patent for the toy, however, lists Hiroyuki Obara as the designer.
Having been removed from toy store shelves after 1985, Optimus Prime was made available as a mail-away toy in the "Digital Doom on the Highway to Destruction" offer in the US in 1986 to coincide with the Transformers movie premiering that year. He cost $21.50 and 5 Robot Points. He was also offered in 'The Autobots Have A Special Mission For...' mail-away pamphlet and came with a special "Movie Edition Certificate" and a round sticker that read " Movie . Edition . Transformer" with the Autobot symbol in the middle. (This item is considered rare.)
A larger version of Prime, with Advanced Automorph technology and a more complex transformation procedure. Has two sets of electronic sounds and lights that activate when the head pops up or when you press a button on the roof (in truck mode), and a single projectile weapon that can swing over the toy's right hand. Unlike Megatron (whose head is fixed) and Brawl (whose head is connected with a ball joint), Prime's head is limited to side movement due to the circuitry on his LED eyes. This figure has a folding cannon and a firing missile.[76] With this figure standing nine inches tall and Optimus being 28 feet (336 inches) tall, the toy is about 1/37 scale.
The Autobots and the Decepticons came to a distant world in the grip of an ice age. Assuming alternate modes based upon the dominant (though doomed) indigenous creatures of this planet, they continued their ancient, unending war. However, the Autobots, with their energy levels dangerously low, withdrew from combat as the world grew colder. They sought refuge in a deep cavern and entered stasis lock, awaiting the day when surface conditions changed to better suit their operation. Hearts of Steel #1 Optimus lay under the Mare Rurek Glacier. Infestation 2: The Transformers #1 Millions of years later, Bumblebee was awoken by the hammering of humans working on a rail line. He briefly considered awakening Optimus Prime, but thought better of it. After discovering the world had changed significantly, Ratchet thought there was no reason to awaken Prime. Hearts of Steel #1 When Bumblebee discovered the Decepticons were once again active on this world, Ratchet and Prowl agreed that the Autobots must intervene, but again decided out of rousing Optimus from his slumber. Hearts of Steel #2

This Collector's Edition Japanese e-HOBBY exclusive was a redeco of Targetmaster Kup, released in conjunction with the 2006 reissue of Kup and designed to represent the character Orion Pax from the Generation 1 television series episode "War Dawn". Orion transforms into a Cybertronic pickup truck and came with both a gun and Barrelroller, a redeco of Recoil. He has full shoulder rotation, though the way his elbows are set up means he cannot make full use of their joints. His legs feature no articulation whatsoever.

The bio for the Botcon 2015 version of Megatron reveals that he comes from an alternate reality where Megatron achieved victory during events similar to Dark of the Moon and killed both Optimus and Sentinel Prime. However, Rodimus Prime then arose to challenge him, facing him in a battle that Megatron ultimately chose to flee, resulting in him ending up in the Axiom Nexus.
The first reissue of the original Optimus Prime toy in North America since the Generation 1 toyline reached its end, this "Commemorative Series" edition of the figure was a Toys R Us exclusive. It was mostly identical to the original figure, save for some necessary modifications made for safety reasons: In the first instance of what would become a recognizable alteration to the mold, the toy's smokestacks were shortened, while the Combat Deck's firing missiles were elongated to prevent potential choking, as was the case with all other Commemorative Series figures' firing missiles. This release also had the trailer's launching feature removed.
The more interesting "Sky Master Mode", revealed in the "Cybertron Satellite" segment of "Phantom Transformation! Mind-Diving", has him using O.P. as a blaster, two B.2s as leg-thrusters, and two sets of C.L./Jida(!) combinations as back-mounted jet packs. The AMW versions of C.L. and Jida, while not as color-coordinated, are a far more economical option than buying two of each Cliffjumper. Good luck with the second B.2. This mode was created as a "counter" to the aerial combatant Starscream, along with the Energon Sniper Combo Weapon (despite it being a Decepticon-Micron-formed weapon). Apparently, the "Arms Up Mission" game isn't picky about factions.
The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
The cab is yet another iteration of the original Optimus Prime/Convoy toy, based on the Ultra Magnus retool, as distinguished by the elongated hubcap pegs on the front wheels. Indeed, the iPod-aesthetic, all-white deco would make you think this figure should be Magnus, but no, the packaging clearly says "Convoy", making it twice in one year that Takara has released a white-redeco Prime that isn't Magnus.
Part of the first wave of Beast Hunters Series 3 Voyager Class toys, Optimus Prime is functionally an upsized copy of his Beast Hunters Series 3 Cyberverse toy, though with certain sculpted details based on his larger toys, the replacement of his ball joints with more robust ratchet joints, the addition of thigh swivels, and various deco differences. As a result, his complexity is lower than in his previous Voyager Class toys, but he ends up being much, much more massive.
The use of a G1-based Orion Pax design and an Aligned-based Optimus Prime design with Movie Optimus Prime packaging art makes it hard to know where on the wiki this should go, but given the general movie-themed bent of the Tribute line, we're putting it here. Continuing the tradition, the 2-pack was first released in some Asian countries like Taiwan without any prior announcement from Hasbro itself. A few months after the 2-pack's release, Tribute Optimus Prime & Orion Pax saw worldwide release through Amazon, including an Amazon Japan listing bearing a The Last Knight ID number.
In Transformers: Armada, Optimus Prime shares the role of main protagonist with Rad, Alexis, Carlos, Starscream and Hot Shot. The Optimus of this universe shares many similarities with his parallel universe versions, including nobility of spirit and a strong desire to protect all humans on Earth. In this continuity, the two sides are not looking for energon, but a small race of power-enhancing transformers known as Mini-Cons. Optimus led his small band of Autobots to stop Megatron from acquiring their power for himself.
Both Jet Power Optimus Prime and the accompanying redeco of Voyager-Class Revenge of the Fallen Megatron would have come with an issue of the Unite for the Universe comic book, but due to the cancellation of both figures, the comics were eventually included with the Movie Masterpiece releases of Leader-Class Starscream and Bumblebee. Of amusement is the fact the comics are essentially showcasing toys that have been canceled.
Part of the first wave of Bot Shots Series 2 launchers, this new-mold Optimus Prime transforms into a very boxy Generation 1-styled truck with trailer. As a Spin Shot, one manually winds up his upper body beforehand when transforming him into vehicle mode, where striking the front of the vehicle will cause him to burst open and spin while auto-transforming. He comes with a launcher used to propel him to great speeds, as well as four cube targets for him to knock over.
Part of the sixth wave of the 2010 Transformers toyline, this Optimus Prime is an all-new Deluxe class mold based on the original Generation 2 Laser Optimus Prime toy (see above). Transforming into a racing truck, he has some influences from the live-action movie Optimus Prime, including the more defined flames on his hood, athletic robot mode proportions and a more aggressive-looking translucent orange sword that can be held with both hands for maximum extreme chopitude. Optimus Prime features extensive use of translucent plastic in his arms, head and upper torso for a light-piping effect. Optimus also has a (non-detachable) matrix gimmick in robot mode that is formed by a relief pattern on the inside of the cab's side windows and is visible through the windshield/chest in robot mode. Like the Legends toy, he's part of "Reveal the Shield" and features a rubsign, this time on the roof. He is also very articulated and poseable, even featuring ankles and wrists that are both ball-jointed and hinged.
Though the figure does a much better job of conveying the on-screen character model than the ROTF Leader Class mold did, there are still a few inaccuracies—most notably the forearm and shoulder pad designs and the head/torso proportions. The final product also lacks certain paint details visible in stock and packaging imagery, such as the blue rings on his feet and the gold on his pelvis. It should be noted that this mold does not combine with Jetfire.
Similar to the Activators toyline, One-Step Changer Optimus Prime features a spring-loaded transformation. He features swivel articulation in the head and both arms. He shares a similar (not identical) transformation with his fellow One-Step changer, Hound. Also, due to his transformation scheme, his shoulders can be pushed forward (the arms is pushed on the same time), which also allows him to wield a close ranged weapons with longer handles with both hands.

A redeco of the Super Optimus Prime mold with a primarily red cab, much deeper blue, and a Prime Force uniformly colored in black was planned to be released with Smallest Transforming Transformers Generation 1 Optimus Prime as a Target exclusive. The toy got far enough along in development to have package artwork created by Dan Khanna, which was later revealed online, but it was canceled shortly before making it to full production. Its red, white, and black coloration earned it the festive nickname of "Santa Prime" among fans online.
In Axiom Nexus, General Optimus Prime found himself inducted into the Convoy, a group of Optimus Primes and their kin dedicated to safeguarding the multiverse. While the other Convoy members tended to stay in the upper reaches of Axiom Nexus, the General was able to use his unusual appearance for an Optimus Prime to venture in the Offworlder zones without suspicion, a great help to Offworlder Zone Security Administration Commander Cheetor. The General was also assisted in his new mission by his longtime scout, Sergeant Hound. General Optimus Prime profile card Sgt. Hound profile card
The first release in the Asian-exclusive Asia Premium Series toyline is an extensive redeco of the previously-Japanese exclusive Striker Optimus. He features a comprehensive paint scheme directly based on Jetpower Optimus Prime, with blue pinstriped flames, lots of silver paint, and vacuum metallized parts, although his hands are left unpainted in favor of painting his mirrors silver. Along with his standard accessories, he also comes with 2 battle blades, which were previously exclusive to Toys"R"Us Japan. He features the "We must stop the Decepticons!" voice chip, but batteries are not included. Rather helpfully, his instructions are supplemented with text instructions written in English for all the steps, as well as the additional photographs used for the previous Striker Optimus toy.
In "A Fistful of Energon", Optimus Prime is informed by Ultra Magnus about Starscream's escape from prison. He is quite upset when he has heard that Prowl set out in search for him on his own. He orders Prowl to return, but he disobeyed him. Later, Prowl is bound and abandoned by Lockdown, who wants to get the bounty that Megatron had set on Starscream. But Optimus Prime, together with Bulkhead and Ratchet, succeed in finding and releasing Prowl.
In addition, it is very difficult, if not impossible for the vehicle mode to tab together properly. The entire cab assembly breaks apart very easily as the tabs lack sufficient friction to keep it together, resulting in either a gap forming between the front windows and the hood or part of the hood raising up. The pipes that are supposed to connect to the bottom of the smokestacks also don't swing out far enough to properly do so if the feet are tabbed together completely. When attempting to complete the cab assembly, it is advised to apply upward pressure on the front side barrels while pushing the cab downwards. A misassembly error is also present on all versions of the mold, where the roof hinges that connect the sides of the cabin are reversed.
In The Transformers: Devastation, Hot Rod is repaired and reformatted into a Dodge Viper. Dealer tried to convince him to pull some strings to get him to Earth, but Hot Rod and Wheeljack had the more important task of rescuing Ironhide. They ran into a bit of trouble with the Machination's Headmasters. They managed to escape temporarily, but were found and Wheeljack was incapacitated. Hot Rod easily held his own with the Headmasters, and noted that for some reason they had lost their "edge". He received a little help from Hardhead, who was mainly there to take Hot Rod and the others back to the Ark-32 for evacuation to Garrus-9. Hot Rod refused to go, wanting to see the Headmaster mystery through to the end. Hardhead reluctantly let him go.
NEW! TFSource News - IF Catastrophe, Flame Toys Tarn Final Stock, MMC Cylindrus, MP-36+ Megatron & More! NEW HOT INSTOCK ITEMS: - Iron Factory - IF-EX24X War Giant Catastrophe - Set Of 5 - Flame Toys - Transformers - Tarn - Mastermind Creations - Ocular Max - R-34 Cylindrus - Mech Fans Toys - MF-37 Veteran and MF-20 Scourgers - Magic Square - MS-B02F Fevernova - Diaclone Reboot - DA-30 Powered System Maneuver Gamma & Delta Set - Planet X - PX-C01 Ismenios - Transformers Encore - - Read More
Optimus Prime features a MechTech Blaster that can convert into an Energon Battle Axe reminiscent of the Generation 1 character's iconic weapon, though the weapon cannot be locked in battle axe mode. There is also a pair of C joint rods on the underside of both forearms. His MechTech blaster can plug into the port on each of his arms or be held in either hand in robot mode, or plug into one of two holes on his truck roof/robot shoulders.
The Beast Wars raged on prehistoric Earth, eventually leading to the discovery of the buried Ark sometime after its crash on prehistoric Earth. Megatron, following his namesake's instructions in a desperate gambit, decided to attempt to change history by killing Prime, who was still lying in the Ark in stasis lock. Megatron hoped that this would result in the Decepticons winning the Great War and eventually Predacon control of Cybertron. Megatron unleashed a full-power weapon blast at Optimus Prime's face, near-fatally injuring him. The Agenda (Part III) However, Optimus Primal proceeded to take Prime's spark into his body to protect it from surgical trauma while his injuries were repaired. The subsequent power increase caused by Prime's spark's connection to the Matrix mutated Primal into a large, Transmetal "Optimal Optimus" form. Then, with the repairs complete, Prime's spark was restored, and he briefly activated before sinking back into normal stasis. Optimal Situation

A BotCon 2012 exclusive purple redeco of the Deluxe "Generation 2" Optimus Prime figure from the Generations toy line, with the sword's blade molded in clear yellow. Much like the 2008 Voyager figure, this figure has painted-in "battle damage" effects. The right side of the hood has the words, "I shall stand...", while the left side says, "The rest shall fall."

My 6 year old son has recently gotten into the classic transformers. He has asked for an original Optimus Prime for Christmas. I can’t bring myself to spend the money on an original 1984 model, but would like to know if the reissues from China (sample in the link) are quality products. I’m not looking for a masterpiece, but i don’t want something that will fall apart within a month or so. Thanks in advance for the helpOptimus Prime


In Titan Magazines' UK Transformers magazine, a comic strip on Optimus Prime, written by Simon Furman, would reveal where he was during the events of Movie Prequel #1. As he carries out his fateful plan to send the Allspark into space, the Autobot base is attacked by one of Megatron's drones with specific orders to kill him. As it locates the Allspark, Prime does the only thing he could think of to prevent it from transmitting its location to Megatron. He transforms into protoform mode and physically rams through it. Recovering in time to see the Allspark blast off, Prime is granted a vision of their war on Earth.


It uses the 1985 post-rub mold, no metal plates, and the trailer's launcher fires short(this can be modded with some disassembly, Toy Polloi has a video showing how). The wheels roll a bit iffy, this is a common documented issue. Personally I believe there is a slight molding error in the robot, the legs do not seem to fold down quite as far as an official cab's legs do, causing a very slight lean backwards.
Hot Rod then fought in the battle of Autobot City and saved the city for if he had not attacked Megatron, he would have destroyed it. Due to his attempted intervention in the epic battle between the Autobot leader, Optimus Prime and the Decepticon leader, Megatron, Prime was lethally injured. Before he died, the Matrix got passed on to the Autobot Ultra Magnus, whom he referred to as "old friend", despite protestations.
Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[38] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[39]
×