His original trailer is not included with the set; instead, he comes with a new deluxe-scaled trailer, not available with any other figure, based on the one towed by Prime in Dark of the Moon. The trailer is compatible with both figures, and sports 5mm post-holes that will hold (among many other things) G1 Prime's laser rifle and the MechTech weapon Movie Prime is armed with.
The Reveal the Shield Legends Prime mold was redecoed again for the inclusion in the second EZ Collection wave. This version of the figure replaces his blue on the head with black, and the blue paint on the legs is stripped off, revealing the black plastic underneath. and like the Megatron redeco in the same wave, features a Generation 2 Autobot symbol instead of a Generation 1 insignia.
Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.
3. Licensed themes: In the 80’s the Lego sets were more generic and interchangeable among themes. There were the basic Space, Town, Castle themes. The color schemes within a theme were more homogeneous (i.e. Blacktron sets or Mtron sets all had a common color scheme). Since there was no “fictional” real life object being copied, piece selection tended to emphasize versatility over “realism”. Almost every Lego set of the past had pictures of alternate models featured on the boxes and instructions that was meant to inspire a child to not just build the model featured in the instructions, but to embark on the mental challenge of making their own creations.
This Optimus Prime is a minor redeco of the One-Step Changer figure, omitting the paint apps on the knees, the flames on his shoulders, and changing the robot mode chest's deco. Along with his wavemate Bumblebee, Optimus Prime loses his pin on his leg, which is used to activate Stomp & Chomp Grimlock's pop-out weapons and gimmicks. As with the first wave of the Turbo Changers, Optimus features a nearly invisible tampograph on his vehicle front, which can be revealed with Mega Turbo Changer Dragonstorm's UV-powered Cyberfire gimmick.
The Universe incarnation of Generation One Optimus Prime is a redeco of the Robots in Disguise Scourge's Spychanger toy, a smaller, simplified version of the original mold. He replaces most of the black plastic with predominantly red and blue, with silver for detailing, with an overall deco making him resemble the original Optimus Prime. Like most Spychangers, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly.
The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
Optimus has the ability to change any part of his robotic body into a tool or gadget. He has swing lines in his wrists. His wrists can also fire capture bolas. His arsenal includes a grappler, fire extinguisher and a negative friction spray. Unlike in all the previous series, his face can almost always be seen, because his mouthplate is retractable like in the 2007 live action film.
Dark of the Moon Voyager Class Optimus Prime is an all-new mold. He features heatshield details in his sculpting and translucent solar panels on various parts of his body, and huge gas tanks. Optimus himself is differently proportioned, having larger feet and a smaller torso and arms. He also features some faux-kibble/parts: His actual windshield chest is being covered by a sculpted panel featuring his characteristic deformed windshield-chest, and a pair of sculpted tires on his thighs. His pair of optics is designed to have a light-piping gimmick, but it was rendered useless since it was painted in smoke gray on top of the colorless transparent plastic.
The second known version  ditched the triplechanging gimmick on the cab and simplified things a good bit. This Powermaster Prime has several distinct characteristics only seen in the second design, such as the wider "block head" and two faux smokestacks on top of either shoulder as opposed to one. Also, in a rather odd twist, this design features a black head and fists for both super and regular modes rather than the traditional blue. It also had yellow eyes in either mode a la the original Optimus Prime.
During the three-part "One Shall Rise", Optimus uses the Matrix of Leadership to defeat Unicron. Unfortunately, in doing so, he not only emptied the wisdom of the Primes, but lost his own memories as a Prime, believing himself to be Orion Pax once again. Megatron took advantage of this to manipulate Orion into deciphering Iacon records the Decepticons have stolen from Cybertron. Eventually, Orion figures out the truth and escapes. Jack is later able to restore Optimus' memories after downloading the wisdom of the Primes from Vector Sigma into its key which Optimus gave him before he left to stop Unicron. However, Optimus could not recall the time he spend as a Decepticon.
On a Cybertron dominated by Shockwave and the Decepticons, Optimus Prime and the Autobots took on the roles of resistance fighters. Cobra experimentation transported a contingent of Cobras and G.I. Joes to Cybertron and destabilized Teletran 3, which led to the computer sending several Transformers to Earth across different time periods. When Optimus Prime saw Jazz get zapped by Teletran 3, he leapt to rescue his soldier, only to be transported away as well. G.I. Joe vs. the Transformers II #1 A team made up of Joes and Cobra agents were sent back and found Optimus Prime and the Stunticons in 1930s-era Chicago, disguised as period cars and trucks. The Stunticons chased Prime and the Joes around the city until everything was wrapped up with bullets, a collapsed bridge and some dynamite. G.I. Joe vs. the Transformers II #2
Additionally, Star Convoy transforms into a large battle station that interacts with the Micromasters that made up the vast majority of the Transformer toyline at the time. His chest contains a peg that allows Micromaster figures to stand inside it in either robot or base modes, and he comes with a unique Micromaster version of Hot Rod not available on its own. He features storage space in his legs for two spring-loaded figure-launching Micro Trailers, and comes with one of his own, decorated in a unique black and orange color scheme. In this mode, two ramps are connected to the Microcarrier; when the carrier's treads are set rolling, they do not move the base, but instead act as conveyor belts that carry Micromaster figures down the ramps. The Microcarrier also spins a gun turret mounted between the conveyors, on which Micromaster figures can stand. Finally, a special connector packaged with Star Convoy allows the Microcarrier to be connected up to Grandus's base mode, powering his moving elevator.
Offered as part of a Lucky Draw campaign in August 2004, this extremely rare version of Masterpiece Convoy is almost entirely vacuum-metalized gold, lacking any other painted detail or stickers. The parts which are not viable are molded in a flat golden plastic; the only exceptions are its rubber tires, the core of the Matrix and the energon-axe, which remain black, blue and orange, respectively. Whether or not the figure was intended to evoke Optimus Prime's entirely-golden appearance in the cartoon episode "The Golden Lagoon", when he was coated with electrum, is unknown; given that entirely chroming a figure gold is a fairly standard deco for Lucky Draw figures, it may just be happy coincidence more than anything else.
What makes LEGO sets seem more expensive now is that the effective piece count seems lower. I remember that in the 80s, each set was full of bricks that were not overtly specialized only to that set. So they were useful for more things. Now the sets usually come with less bricks and plates (things that could be useful everywhere) and bring more things like minifigure accessories, flick fire missiles and other things that are not that useful. Although I think that everything was far worse in the late 1990s/Early 2000s than it is now.
The more interesting "Sky Master Mode", revealed in the "Cybertron Satellite" segment of "Phantom Transformation! Mind-Diving", has him using O.P. as a blaster, two B.2s as leg-thrusters, and two sets of C.L./Jida(!) combinations as back-mounted jet packs. The AMW versions of C.L. and Jida, while not as color-coordinated, are a far more economical option than buying two of each Cliffjumper. Good luck with the second B.2. This mode was created as a "counter" to the aerial combatant Starscream, along with the Energon Sniper Combo Weapon (despite it being a Decepticon-Micron-formed weapon). Apparently, the "Arms Up Mission" game isn't picky about factions.
This Optimus Prime is a new mold that matches the character's more cartoony and simplified appearance in the Q-Transformers: Mystery of Convoy Returns cartoon. The "Watashi ni ii kangae ga aru" added to his name means "I have a good idea" (私にいい考えがある). A line originally spoken by G1 Optimus Prime at various times in the Japanese dub of the original cartoon, it has a reputation as a catchphrase of his among Japanese fans and has been reused by many Optimus Primes since, including the Prime in the Q-Transformers cartoon.
Prime's homecoming was not all he had hoped for, for Shockwave had taken control of the planet. Prime and the other transformers were forced to go underground, waging a guerrilla war against the Decepticons. Around this time, Cobra would attempt to steal Teletran-3, but their attempt to teleport directly into the chamber would set off a catastrophic malfunction, one that threatened to crack open time itself. Optimus Prime and the Stunticons were amongst those who found themselves sent back in time. Optimus was reformatted into a 1920s semi-truck and was eventually rescued by Roadblock, Beach Head and the Baroness, who helped him capture the Stunticons.
The price per minifigure has definitely gone up in the past 5 years. You used to be able to get 4 minifigs (along with some other stuff) at the $9.99 price point, now these are $12.99. And there are fewer minifigs in most $19.99, $29.99, etc. sets now. Lego Minifigures Series 1 was $1.99 each, subsequent series $2.99 each – I know it’s supply and demand, but it still feels kind of exploitative. I admit the cleverness of the builds keeps improving though.
The Hasbro website explains it best: "The rogue DARK NINJA MASTER was exiled to a cave beneath Arashikage Mountain for betraying the ninja clans. After finding the Moon's Blood, a mystical stone of great power, he was able to channel the energy of dead ninjas, making him almost unstoppable. Seeking revenge, he has emerged from his subterranean prison to destroy all ninjas. Only two people can stop him: STORM SHADOW and SNAKE EYES. The two adversaries must join forces, for only by working together will they be strong enough to defeat this evil super-ninja."
Hero Optimus Prime was the first new-mold Optimus Prime toy created for the Generation 2 line. He transforms into a Kenworth truck of unknown model which defies Optimus convention by being one continuous unit, rather than the traditional cab-and-trailer combo. Decals form the windows of a faux truck face to represent his chest, featuring both his name and what appears to be a life support readout coming alive towards the end. In addition to a small gun, he is armed with a large missile launcher, which can fire a rubber-tipped rocket by means of a bellows which you slam your fist down on to produce a puff of air. The launcher is accessible in both modes, ending up mounted on his right forearm in robot mode; the bellows is attached via a rubber hose and cannot be disconnected, but stores on the figures's back when not in use, as do the rockets. A similar air-launching system with identical missiles was used by the simultaneously-released Hero Megatron, and by Laser Optimus Prime the following year (see below).
This version of Optimus is a redeco of the original Legion Class Optimus Prime toy, featuring additional paint details. He features an Autobot insignia on his faux chest. His head was not entirely clipped down in his stock photos. The stock photos shows him having darker plastics & silver paint as opposed to the final product. This seems to have been a trick of the lighting, as the released toy remained its standard plastic colors & silver paint apps.
Per Ravage's original plan, with Unicron defeated, the Decepticons returned to conquer the transformers. Optimus Prime had also planned for this event, and sent Mirage to press a switch, buried deep within Cybertron, that would render all transformers inert. This was seen at the conclusion of the "Five Faces of Darkness" story arc from the original animated series. Optimus hoped that by rendering all the transformers inoperative, the war would be stopped, hoping that the humans would be able to reactivate the transformers in the future. Instead of deactivating all transformers, however, only those with original Cybertronian bodies were deactivated. Transformers with Earth-made Binaltech bodies continued to function. The Autobots effectively won the war, the large army of Binaltech Autobots easily outnumbering the few Decepticons who had managed to procure Binaltech upgrades. The few Decepticons remaining, effectively just Nemesis Prime and Shockwave, escaped with Megatron and their other inert comrades.
If you’re a child of the ‘80s and grew up with the original The Transformers cartoon, Bumblebee may have been the second Transformer you ever saw-- in the narrative of the show, anyway. In the first episode, “More Than Meets the Eye,” you would’ve started off by watching the memorable opening sequence. There, you first get a quick glimpse of a group of five Autobots in vehicle mode, including Bumblebee alongside Optimus Prime.
Part of TakaraTomy's Movie Advanced Series lineup, Revenge Optimus Prime is redeco of the 2010 Transformers Battle Blades mold, featuring darker plastic, a pair of flip-out swords (the first release of this mold) from the Hasbro release, and chromed fuel tank-guns & sun visors. His shins & wheel joints are bronze from the Hasbro release as opposed to the grey of Takara's Autobot Alliance release.
If Cosmos radioed his findings to Optimus immediately, Optimus’s convoy moved in to investigate a nearby Decepticon base. En route, the Autobots passed near a human town, but began floating in mid-air before being able to reach it. Optimus quickly deduced that this phenomenon was caused by an anti-gravity beam, courtesy of the Decepticons. Worried about the nearby humans also being affected by the lapse in gravity, Optimus had to decide whether he would order his troops to stop and help the townspeople, or to continue forward and attack the Decepticon base.
This new smaller mold of Optimus Prime features a similar transformation to the original toy. Unlike most transformable figures in this line, Optimus completely lacks 5mm fist holes. Compared to the finalized toy, the product photo on the back of the box has a number of deco differences, most notably silver thighs and white accents above the front windows in addition to those below. The same box photo and the more deco-accurate stock photo (right) also neglect to fold out his fists, which is the only other step in his two-step transformation.
After many battles on Earth, Optimus died by standing purposefully in the path of the Hydra-Cannon built by Megatron from the three Mini-Con weapons, the Star Saber, the Skyboom Shield, and the Requiem Blaster. He managed to partially reflect the beam, damaging the Hydra-Cannon. It was the Mini-Cons themselves, however, who resurrected him, entering the Matrix and reconstructing a new body for him. Subsequently, Unicron forced Optimus to face the dark part of his soul and that, on some level, he enjoyed the thrill of combat. Following Unicron's defeat, Optimus's denial was sorely tested as Galvatron, an upgraded Megatron, forced him into one final furious battle. The battle ended when Starscream sacrificed himself to end the circle of hate that powered Unicron. Floating through space, Optimus found the Matrix, but said he did not deserve it. Before beginning the battle with Galvatron, he was upgraded by the minicons. His red torso turned black and he was able to battle Galvatron one on one.
When the narrative begins, we’re taken to Cybertron, where a narrator tells us of the battle between the Autobots and Decepticons, a war fueled by the Decepticons’ desire for total domination. We’re told, “The Autobots, on the verge of extinction, battled valiantly to survive.” Then, two Autobots in robot form climb out from under a grate, armed with a bunch of energy conductor sticks: Wheeljack and Bumblebee. Wheeljack transforms into a Cybertronian vehicle, then Bumblebee loads the sticks inside him. Bumblebee is so relatively small that he remains in robot form and hops inside Wheeljack for a ride, rather than transform himself.
This Japanese e-Hobby exclusive is a redeco of Targetmaster Kup, made to represent the character Orion Pax from the cartoon episode War Dawn. He transforms into a Cybertronic pickup-truck thing. His truck bed has a peg-hole to mount his partner Barrelroller, who also serves as a hand-held weapon. The set also came with a re-deco of Wheelie as Dion.
We're sure we're not telling you anything you don't already know when we say that Hot Wheels are miniature die-cast cars with dynamic multi axular momentum technology (ie, they roll). They are usually based on real-life production cars but sometimes are modeled after bad acid trips, with wheels added later (for the rolling). Shortly after the introduction of the cars, Mattel launched various tracks to take full advantage of the cars' rollability.
While Transformers ended poorly for the US market, the same can not be said for the UK, Canada, and Japan markets as they went on to produce their own continuing series between 1991 and 1993, despite the UK market in particular missing a substantial amount of figures prominent in the comics and animated series throughout the line's run. Each country produced their own continuity. The UK and Canada continued with new Action Master figures and introduced the Turbo Masters and Predators. Japan continued with the Micromasters concept.
In one of his less impressive moments, after running out of ammo during a battle with Deathsaurus, Optimus Prime ordered his fellow Autobots to improvise and hurl everything that wasn't nailed down at their enemy. This included the Blackball, unfortunately. Catching it, Deathsaurus began to fantasize about his inevitable galactic conquest, all the while being pelted with rocks and litter. Frustrated, Deathsaurus accidentally hurled the Blackball back to the Autobots in a fit of rage. Good Job! Deathsaurus!!
General Optimus Prime later attended a meeting of the Convoy held by Starscream. There, he assured the others present that he had been mistaken about the rumored Megatron's identity. Starscream was convinced, but the rest of the Convoy were savvy to the truth. The other Optimuses supported General Optimus Prime's decision, stating that if C-81 had earned the General's trust, that was good enough for the rest of them. Optimus was later seen hanging out with Spy-Eye on his off-time. Cybertron's Most Wanted
This sculpt was redecoed from the Generation 2 Gobot Firecracker. The plastic colors are a "solid" version of Firecracker's color layout, substituting opaque red for transparent red plastic. It was redecoed again for the third wave of Go-Bots to become Sideswipe (who Prime really looks a lot like), and would later be used to created Robots in Disguise R.E.V..
This Classics Optimus Prime is a smaller, deluxe-class toy bearing a greater resemblance to the original G1 toy. He was only available in a special Versus pack with a similarly unique Classics Megatron toy and later the FAB version of the 2007 movie Prime. Later releases of this toy had him individually packed in some European countries. His vehicle mode and robot mode is based upon the original toy, but due to limitations in design, budget and gimmick, does not succeed very well. His thighs cannot collapse into his lower legs, meaning they are exposed in vehicle mode, as is his head. Although to be fair, you wouldn't really notice the leg thing if he had a trailer. But, he is greatly articulated.
"Optimus Prime Figure" (オプティマスプライム・フィギア) is a redeco of 2001 Robots in Disguise Spychanger Scourge, painted to resemble Movie Optimus Prime. Of note is the tampographed detailing on his chest resembling Movie Prime's distinctive chest design. Like most Spychangers, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly.
Mega Optimus Prime is a new larger-sized mold with the similar transformation scheme from the 3-Step Changer toy. It transforms from truck to robot in just 3 easy steps! His deco is based on his appearance in the season finale "Battlegrounds". He also obtains additional articulation on the arms, and sports connector ports for any Robots in Disguise (2015) Mini-Con figures.
Main event time! Nitro figures are more like your traditional Generations/Power of the Primes deluxe bots. Standing at 7-inches, they feature increased detail, additional paint applications and all come with a core to unlock additional features. In addition to Barricade, Optimus Prime, and VW Bumblebee (this one’s my favorite of the entire line), the Nitro series will also have a Camaro ‘Bee.
I you can get an official reissue for around the same price, do it. I lucked out and got an opened but mint Encore for $50 last week but you'll be getting lucky that way. All Hasbro reissues have short smokestacks and long stacks are harder to get separate to swap out. Average price for a Japanese reissue is around $100 opened. If you are on a budget and the kid doens't care about slight issues, the $40 KO would be the better option.
MATTY COLLECTOR SPECIAL SALE If you missed out on the original Matty Collector figures, you’re in luck; many items are back in limited quantities! https://www.bigbadtoystore.com/Search?T ... geSize=100 ------------- NEW PREORDERS ------------- TRANSFORMERS STUDIO SERIES Reach past the big screen and build the ultimate Transformers collection with Studio Series figures, inspired by iconic movie scenes and designed with specs and details to reflect the Transformers movie - Read More
The TakaraTomy version, part of the first wave of Movie Advanced Series toys, is dubbed "Classic Optimus Prime", and opts for a deco closer to Prime's previous on-screen appearances, omitting the blue paint on his feet and hands to reveal the gray plastic underneath, and adding new paint details all over. Instead of painting it in clear light blue, his light-piping eyes is neutered with opaque light blue paint. In terms of quality control, at least one sample has missing it's silver paint on the head's left cheek.
In an amusing (but glaring) example of poor quality control in a Takara product, the back of the packaging features a small amount of Engrish, notably the word "kinetic" being written as "Kinetick". The bio also mentions the elemental metal as the "Cyber-Matter" living metal, which is used for the Aligned continuity family. Oddly, TakaraTomy's stock photo of the robot mode figure was later used as a cutout "battle figure" included with Telebi Magazine's Burning Megatron.
Eject lamented that all the great and famous Cybertronians, including Optimus Prime, were long gone by the time Cybertron was controlled by the Builder Assembly. Broken Windshields The Maximal Overshoot experienced a series of visions from Cybertron's past after discovering the Oracle, including Optimus Prime launching the Ark during the Great War. Cultural Appropriation
MP-10 Convoy, advertised as a "perfect new model" on its packaging, is an entirely new tooling of Generation 1 Optimus Prime. Convoy is now smaller, making him more in-scale with other recent Masterpiece toys, such as Rodimus, and comes with a trailer and various accessories. While the front of the vehicle mode's cab is an accurate depiction of a mid-to-late-1980s Freightliner FLT cabover, the back half, (which is, as usual, made out of Convoy's legs) is much larger and robot-leggier in proportion. (So much that they sculpt a ladder on each side.)
Not depicted in the instructions or stock photos, Roller can attach to Prime in vehicle mode via two tabs on the vehicle front which slot into two corresponding slots on Prime's feet. Another undocumented feature is that the butt of the Ion Blaster can be inserted between the barrels of Roller's weapon mode to form a longer weapon. Also not shown in the instructions but depicted on the stock photo on the card-back is that Prime's shoulderpads can be rotated up; the intended positioning for this is notched, although you can position them at other angles.
For all the positive aspects, these changes are not without their drawbacks. The LEGO community has been crying foul over the perceived decline in quality of the bricks5. While nowhere as bad as their competitor, any decline in quality reflects poorly on a company known for quality control. The LEGO group has been expanding its manufacturing base to places outside of Denmark, into Mexico, the Czech Republic, and China (although so far it seems only their “signature brand” non-set items are made in China). LEGO claims that this has not changed their dedication to the quality of standards by which they abide. However, it seems that the molds have changed to reduce plastic6. Whether or not this affects the durability of the bricks is yet to be seen.
Yet another Reveal the Shield redeco with the Motorbreath retooling, Convoy is cast in clear red and black plastic. He has been retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock. Convoy was available at a variety of 2014 events, including on May 3 at a "Kids Walk" event at Fuji Speedway, in special packaging on May 16 at the "Transformers Celebration 2014" midnight event at the Sunshine City Toys"R"Us store in Ikebukuro, on June 15 at Tokyo Toy Show 2014, at the Aeon Mall in Kasukabe on July 19, and at the "Transformers Expo" event in Yokohama on August 9. Convoy was also available as one of three preorder bonuses for Cloud Roadbuster.