Multiple reports suggest that the toy suffers from a design flaw, inferior plastic quality, or both: Due to his hands having peg-holes that are a bit too small to accommodate 5mm posts, they have a tendency to show stress marks on the inside after pegging his sword handle (or most other pegs) inside. Stress marks also tend to appear near his tiny hinged wrists. Fortunately, there have been no reports of the hands actually breaking on either location thus far.
When reports from both Jetfire and Mirage corroborated that the Decepticons were constructing giant rockets to shift Earth out of its orbit, Optimus took to the skies and led his troops on a sabotage mission. Upon their approach, Optimus, Jetfire, and Deftwing overheard Megatron declare that the engines would fire up in twenty minutes. With little time to prevent the destruction of Earth's biosphere, the more maneuverable air-bound Autobots entered the thruster tubes to destroy the rockets from within. Jetfire and Deftwing were successful in their task, and the Autobots beat a hasty retreat to avoid the resulting lava swell. Optimus heaped praise upon the pair afterwards, embarrassing the bashful Jetfire. Moving Day Planet Earth
In robot mode he resembles previous Optimus characters: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.
Aware of the changes to the timestream and the potential for the entire Autobot race to be annihilated by Unicron, Optimus put into motion Operation Distant Thunder, a plan to undo the damage to the timeline caused by Ravage, restoring the events that were seen in the movie. This would mean that saving all the Autobots from Unicron would result in Prime and others such as Prowl, Wheeljack, Ironhide, and Ratchet would die per the original events. They hoped they would be able to at least partially avoid such an outcome by sending a message to their past selves about all they had learned.
This miniature model kit of Energon Optimus Prime comes unassembled and unpainted, moulded mainly from white, red and black plastic and featuring some stickers for essential detail. Standing at around 4.5 inches tall, he comes with his Prime Force drones and can combine with them in the usual ways; while Fire-1, Gyro-2 and Digger-3 are moulded in their normal colours, Submarine-4 is stuck being black, and like every other non-color-molded, non-stickered detail on the kit, must be painted by the buyer. Prime's transformation involves removing his feet and head (an alternate Super Mode head is included, as his antenna does not transform into a helmet), and he does not come with a trailer for the Prime Force, but his gun can shoot small orange plastic BBs via a pressure-launching mechanism, and he comes with a small gold-chromed Energon star that fits onto his left shoulder. The kit also comes with "Episode 1" of the "Optimus Prime VS Scourge" mini-comic, printed on the back of the instructions.
The original Optimus Prime toy, as well as the Diaclone Battle Convoy toy that it was based based upon, transforms into a late 1970s red Freightliner FL86 Cab-over-Engine triple-axle semi trailer truck. The truck mode features rubber tires, and the cab is partially constructed of die cast metal. The windscreen section can open to reveal ultimately-unused seats that were originally designed for Diaclone's driver figures.
Released as part of TakaraTomy's Transformers Movie The Best toyline to conclude the 10th anniversary of the live-action film series, this Optimus Prime is an extensive redeco of his Evasion mode toy. He also uses the faceplated head and the dark gray-colored Ion Cannon used for the Evolution 2-pack/Platinum Edition 5-pack release. While his deco had taken cues from both the TakaraTomy release of Evasion Mode Optimus Prime and the Platinum Edition Breakout Battle figure, the weathering pattern bears a similar resemblance to his rusty version of the figure. Unfortunately, this release suffers from heavy mold degradation, particularly in the form of ill-fitting tabs around the truck front/shoulder area.
With the data from the piece price evaluations I was able to also evaluate the average size of LEGO sets each year. As you can see on the chart below, the average size of sets released each year stayed somewhat constant from 1980-1990 until around 2000 which set sizes started to increase. The average set size seems to have peaked in 2008 (which saw the release of the Taj Mahal), but since then it hasn’t fallen to its pre-2000 levels. It seems to have found a new normal around 300 pieces.
During the Cybertronian Civil War, Sentinel Prime was killed. Prior to his destruction, he bestowed the Matrix of Leadership to Optimus Prime, who became the new leader of the Autobots. Despite being one of the youngest Cybertronian leaders, Optimus demonstrated extraordinary courage and wisdom in the war against the Decepticons. He: treated all lives with benevolence, fought for freedom and peace, and continues to fight to protect the weak and maintain their beliefs.
Available exclusively at Hasbro Toy Shop and their booth at San Diego Comic-Con 2011, this version of Ultimate Optimus Prime is presented in vehicle mode, packaged into a large, foil-embossed bubble packaging (similar to late Alternators packaging) styled after Optimus Prime's trailer, with an additional foil-embossed sleeve styled after the hood of Optimus Prime's truck. Exclusive to this release is a set of stickers one can apply to the trailer. The toy itself is otherwise identical to the regular retail release.
A redeco/new-head retool of the Rescue Bots Hoist the Tow-bot figure, Optimus Prime transforms from robot into a tow truck. Pulling the tow truck's hook up converts him back into a robot. The panel on the top of the cab has been remolded with additional truck detail in place of the Rescue Bots logo on Hoist, while the Rescue Bots insignia on his torso is unpainted.
On the day before the Transformers GT began, GT-R Prime found himself racing with GT-R Saber when they were both out for a test run. Though Misaki warned him not to get too invested in a practice race, Prime took the challenge seriously and won the race by briefly transforming into robot mode, thus tricking Saber into slowing down in anticipation of a fight. Test Run Battle! –Prelude– Prime earned the pole position for the Transformers GT, but this combined with his victory over Saber made him overconfident, and he was unprepared when Saber attacked him immediately as the race began and sent him flying. First Fast Attack! –Whoever Strikes First Wins– GT-R Megatron also targeted Prime during the course of the race, seeing him as his fated rival. One Shot and One Kill!! –Finishing Blow–
The "Underbite Jetpack Takedown" Optimus Kreon uses the new 2015 style of Kreon hips and torso, with a hollow hip-peg and a central post inside the torso for increased grip... which also makes them incompatible with about four years' worth of Kreons. Based on his appearance in Robots in Disguise, he features a new version of the Optimus helmet, this time lacking a moutplate. He attaches to an included jet pack, armed with two pressure-launch missiles.
Part of Hasbro's Platinum Edition offerings for 2016 intended to commemorate the 30th anniversary of The Transformers: The Movie, this Optimus Prime is yet another redeco of the Classics Voyager toy. Rather than the show-accurate colors like the Age of Extinction 2-pack figure, the toy's deco is very similar to the Classics release, with some changes and omissions: his blue plastic is a dark metallic sheen, his knee's yellow detailing was removed, his small Autobot symbol tampograph was placed on his right shoulder, and his larger one is placed on his energy unit. His side door/arm kibble is left unpainted. According to Mark Weber, this was meant to represent his abdominal area being torn in the movie's battle. (Yeah, we have no idea how it works, since the "battle damage" parts end up on his arms in robot mode.)
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.
The styling is a little blocky, but these are toys aimed at a younger audience that actually wants to play with their Transformers. They don’t need 45 step transformations that result in perfect representations of what they see on screen. They want something that they can switch quickly between modes and that have added play potential, with power-up engines that unlock special features.
1. Color diversity: Back in the 80s, most sets were comprised of a few basic colors; red, blue, yellow, white, gray, and black. It was much easier to acquire a “critical mass” of pieces in each color to start building one’s own creations in coherent color schemes. Space, Town, Castle sets all had the same basic colors. Today Lego uses a much wider array of colors in their sets. While this adds a lot of variety and visual appeal to today’s sets, this means that one has to buy a much larger number of sets (or scour bricklink) to get achieve a workable critical mass of pieces in each color. After buying some of the modern sets, I end up with a few dark-blue or lime-green pieces that I don’t really have enough to much with other than use as accent colors. They end up in my misc color bin in the event I decide to build the set they originally came with or sell them off on bricklink.
Smallest Transforming Transformers Convoy is the smallest fully transforming Optimus Prime toy yet. He features an accurate transformation sequence based on the original full-sized toy, but understandably has no detachable hands, and has little articulation. His sculpt is based upon his cartoon appearances. He comes with a tiny version of his laser rifle.
GT-R Prime was racing against GT-R Saber and GT-R Maximus when they were rudely interrupted by GT-R Megatron, a ruthless racer out to prove his worth by defeating all others. A fight broke out, but Prime interrupted it and convinced Megatron that they all shared the same need for speed, persuading him to settle things with a race instead. Transformers GT: Mission GT-R
The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.[6][7]
Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.
×