Part of the first wave of Transformers: Robots in Disguise Hyperchange Heroes, Optimus Prime transforms from a futuristic trailer truck to robot in just 3 easy steps! His arms & legs serve as his trailer, while his chest serves as his truck front. He is also one of the few Robots in Disguise Optimus Prime toys which does not feature a faux window chest in robot mode. Both of his arms are articulated with 5mm holes in each hand.
Transformers: Cybertron, named Galaxy Force in Japan, was a follow-up to the successful Armada and Energon lines. The companion anime series program was not originally conceived or produced as a continuation of the Armada/Energon storyline, and it was only later that it was retconned to be a continuation. Thus, several inconsistencies exist. Once again, a new feature was introduced for the line—Cyber Keys, which activated special functions on the figures in a manner similar to the Mini-Cons in Armada. Each figure came with a Cyber Key regardless of size, but there were several Cyber Keys crucial to the plot of the anime series which only came with certain figures. Again, many of the same characters were included but with entirely new figures from new molds.
Hot Rod then fought in the battle of Autobot City and saved the city for if he had not attacked Megatron, he would have destroyed it. Due to his attempted intervention in the epic battle between the Autobot leader, Optimus Prime and the Decepticon leader, Megatron, Prime was lethally injured. Before he died, the Matrix got passed on to the Autobot Ultra Magnus, whom he referred to as "old friend", despite protestations.
After his attack on Optimus Prime, Megatron was thrown out of the Ark when Blackarachnia activated the ship's defense systems. However, he was not thrown far enough and the Predacon managed to reenter the Ark and blast the Autobot leader, decisively erasing the Maximals from the timeline. A Change to the Agenda This had the effect of producing a wildly different timeline.
Chronicle "Movie Optimus Prime" is an e-Hobby exclusive redeco of the Deluxe-Class Dark of the Moon Optimus Prime figure, and comes in a two-pack with a reissue of the Generation 1 Optimus Prime figure. Instead of the blaster/axe MechTech weapon the original release of the figure came with, Prime is armed with a redeco of Dark of the Moon Jolt's Blaster/Hand Cannon weapon.

Prime would make one further surprise appearance in Dreamwave's Transformers: Armada series. With Optimus Prime having disappeared to an alternate dimension, devastated by Unicron, the Autobots attempted to find their leader. As Jetfire attempted to locate him through Spacebridge links to other dimensions, one of these clearly shows RiD Optimus Prime and Prowl.

The First Edition Voyagers were never released in the US, forcing buyers to import him from Canada or Japan... at first. ToysЯUs later picked up this toy, along with most of the "First Edition" line, as part of a huge block of US market exclusives for holiday season 2012. This second run introduced a deco variant, in which the red paint on, beside, and below the truck side windows is omitted, revealing the patch of brown plastic underneath. As he is packaged in robot mode, with his front wheels and shoulders covering said patch, the only way to identify which version is which while in the box is by looking at the hinge joints beside his two painted torso lights, with the center portions of the hinges being unpainted brown on the variant. All releases of this mold also have a minor issue with the truck mode windvane/robot mode heels refusing to connect solidly to the truck cab in vehicle mode, leaving a visible gap above Prime's windshield.


The second War Within Optimus Prime toy in the Titanium series, but also the first official transforming toy from the War Within series. Personally designed by comic artist Don Figueroa (who created much of the War Within comic designs), Optimus Prime transforms into a Cybertronic truck. He is armed with a silver painted Ion blaster, on which the word "DON" can be clearly seen sculpted into the body.
This Trailer is identical to the original BeCool Trailer other than the stickers, and now comes with the trailer/launcher accessory from Bot Shots redecoed in blue with red stripes. While the vehicle mode sticker in his chest remains, the hand-holding and sleeping ones have been replaced by pictures of the launcher: one in base mode and one in trailer mode. He also comes with a sticker sheet for decorating the Trailer Base.
Studio Series Optimus Prime is an all new Voyager Class mold that transforms from robot into a Peterbilt 379 semi-truck. He comes with a pair of Energon Swords, which can be mounted onto his arms or store on the back of his robot mode or truck mode. The figure combines engineering concepts from his Age of Extinction Voyager Class figure with techniques previously used on Prime: First Edition Optimus Prime. He also features a more subdued color scheme compared to other Optimus Prime figures. Like the rest of the Studio Series figures, the figure prioritizes robot mode scale and thus stands shorter than his Voyager Class wavemate Starscream. The CG renders depict him possessing long smokestacks, but the final product has them shortened... again. He also comes with a cardboard backdrop display depicting the climatic forest battle from Revenge of the Fallen.

Part of the first wave of 2012 Generations Deluxe Class toys, Optimus Prime is based on his Fall of Cybertron design, and transforms from a robot to a Cybertronian truck and back. His ion cannon, based on a weapon seen in his concept art, can mount via either of its two 5mm posts onto ports on his hands, forearms, back, and shoulder smokestacks. The toy is known for being oddly small for an Optimus Prime toy, especially when compared to other toys from the same line. This allows him to be more or less in scale with Grimlock and Bruticus (likewise from the same line), however. Optimus features sculpted fake wheels on his back.

Eject lamented that all the great and famous Cybertronians, including Optimus Prime, were long gone by the time Cybertron was controlled by the Builder Assembly. Broken Windshields The Maximal Overshoot experienced a series of visions from Cybertron's past after discovering the Oracle, including Optimus Prime launching the Ark during the Great War. Cultural Appropriation
In 2002, 3H secured the official Transformers convention license as well as licenses to produce comic books and start a fan club. Optimus Prime appeared in Transformers Collectors Club comics, a comic released by 3H enterprises. In the comic, he is the same Optimus Prime from the Robots in Disguise continuity, but is taken to the Transformers: Universe reality.
The Transformers Animated series was broadcast internationally in 2008 except in Japan, where it aired in 2010. This new series uses a very different art-style from the previous series. The Autobots and Decepticons, while fighting in space for possession of the Allspark, crash-landed onto a futuristic Earth and resume their battle after laying dormant for years. In addition to the Decepticons, the Autobots have to face the human villains as well. Classic characters such as Optimus Prime, Bumblebee, Prowl, Starscream, Megatron, Jazz and Ultra Magnus appear in this series.
Released as part of the Target-exclusive Reveal The Shield subline, this Tiny Turbo Changer 3-pack contains a redecoed Optimus Prime and Bumblebee (in their first non-blindpacked release) and a new Steelbane figure. This version of Optimus features red wheels & Tech Spec-esque patterns on his robot mode chest and... groin-flaps, though the real decoding is on his vehicle mode roof, which when seen through the attached clear-red weapons (or similar plastic device) reveals... an Autobot symbol. Surprise.
A large, non-transforming toy that features light & sound effects and voice tracks by Peter Cullen. The figure itself is a representation of Optimus Prime combined with Jetfire's parts - only designed for younger children. A lever on his waist extends his wings, and flying sounds are emitted when he is moved around off the ground. The Power Bots line replaces the 2007 Cyber Stompin' line of the first film.

Featuring a complex transformation, the front and back ends of the truck essentially fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The halves of the rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his price point, he has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, as it is held in place by a simple clip.) Optimus's final Automorph, located in his torso, is activated by flipping the silver lever on his stomach, activating a series of spring-loaded actions where the truck windows are pushed apart and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point, yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.

Optimus includes an spring-loaded missile firing "ion cannon" modeled after Megatron's shotgun from Dark of the Moon, with the missile features a sculpted shotgun nozzle on the front section. It can be held in his hand or attached to the top of the truck cab or truck bed via 5mm post, and, in an unadvertised feature, sports tabs on the rear-most handle that allow the Dark of the Moon Voyager Class Megatron toy to wield it. Also undocumented is the fact that the weapon can be stored under either of Optimus' shoulders.


According to IDW Publishing's Transformers: Movie Prequel comic book, Optimus Prime and Megatron co-ruled Cybertron until Megatron began a war for control of the Allspark. Optimus formed the Autobots, a militia of civilian transformers sworn to protect the Allspark. Optimus fought back, willing to doom Cybertron itself to deny Megatron the Allspark. His reasoning was that a new homeworld could be rebuilt with the Allspark once Megatron was no longer a threat. He entrusted Bumblebee with the task of distracting Megatron at Tyger Pax long enough for the Allspark to be sent into space.

This Turbo Change Series Optimus Prime toy is a slight redeco/retool of the Lost Age Series toy. Deco changes include omitting the flame tampos on his legs and shoulder, and added blue pinstripes on the Trailer/Wing Backpack to evoke his Generation 1 toy's trailer. This toy also features some new parts like the screen-accurate forearms, the command deck for the smaller Turbo Change Series toys, and the trailer's adapter. His usual Sword of Judgment is now replaced with a screen-accurate mold that is similar to the Armor Knight toy's sword, and he now features a new Vector Shield piece, which can convert into a battle axe.


As the Autobots were having trouble with Rumble, Optimus Prime told them try to use his earthquakes to their advantage, which led to the end of the Decepticon. Prime subsequently ordered the Aerialbots to combine and save Grimlock and Roadblock from falling off a cliff. Wolves As they got closer to the Cobra Terrordrome, however, Prime started regretting getting the Autobots involved with the humans' war. He offered to carry G.I. Joe across the water separating them from the Terrordrome, but told them that Autobots only fight if they have no choice, and they had no reason to fight anymore. Moments later, he saw that Cobra were using innocent prisoners as human shields, and Duke added that anyone who Cobra didn't enslave, they murdered. Filled with righteous anger, Optimus Prime ordered his troops to roll out. Trenches


Part of the first wave of Bot Shots Series 2 launchers, this new-mold Optimus Prime transforms into a very boxy Generation 1-styled truck with trailer. As a Spin Shot, one manually winds up his upper body beforehand when transforming him into vehicle mode, where striking the front of the vehicle will cause him to burst open and spin while auto-transforming. He comes with a launcher used to propel him to great speeds, as well as four cube targets for him to knock over.

The second Optimus Primal toy was an ape in the Ultra size class. Though the transformation from primate to humanoid was a relatively simplistic one, the toy compensated with more than a fair share of weaponry and action features. A compartment on his right forearm opened to reveal a skull-shaped mace he could hold in his fist. His left forearm could open into a double-barreled missile launcher. On his back were two spring-loaded missile launchers which auto-flipped over each shoulder. By pulling a lever in the center of his back, both arms would either spin at the bicep or bend in and out at the elbow, depending on the placement of notch-buttons located on either bicep. This gimmick was shown to be an effort to simulate a gorilla beating its chest while Optimus was in beast mode, but could also be used in robot mode, making him swing his weapons wildly before himself. And finally, like many first-year Beast Wars toys, a battle mask/"mutant head" could be deployed over his robot head.

This toy's design has directly and indirectly influenced numerous others over the years, including many future versions of Generation One Optimus Prime himself as well as new interpretations of the character for Armada, the live-action movie, and Transformers Animated. Redecos of those toys have in turn spread the toy's iconic look to several other characters and many of their subsequent toys: Ultra Magnus, Scourge, and the various Nemesis Primes. Additionally, a toy that was originally intended to be the original Optimus Prime was eventually retconned to be the new character Optimus Primal, bringing Prime's appearance over to that character (and eventually Primal Prime as well.) In Japan, this began a tradition of Beast Era Convoys emulating Prime's look, spawning still more toys that trace part of their lineage back to this one.

After step 5, the instructions did not mention that you should fold back the shoulder panels to form the sleeper part until the 11th step. Care must be taken while transforming the legs: the small peg located on the lower leg can be snapped off due to the peg being slightly thick to accommodate with the hole. Also, take note that Optimus Prime cannot wield 5mm weapons with longer posts, as the way that his pinky finger is molded prevents the post from pegging down through his hands. Also, take note that the legs' sculpted small rectangle peg (the one that locks the robot mode legs in place) is prone to warping if care is not taken during transformation.
The figure's transformation scheme is based on the original G1 figure, the only differences being that the fists are not removed but become the headlights, and instead of flipping backwards inside the chest, Diablock Convoy's noggin flips forwards with the aid of sideways-opening windows, akin to Masterpiece Prime. A "laser rifle" in the shape of his ion cannon can be built from black bricks, and stickers bearing the Autobot faction symbol can be placed on Diablock Convoy's shoulders, although this is not recommended as it is designed to permanently stick to multiple tiles which dislodge easily and may damage the sticker.

Many Transformers come with tech specs (short for technical specifications) printed on the back of the box that they are sold in. The owner of the new Transformer is encouraged to cut out the tech specs and save it. This card has information on the Transformer, and will usually include the character's name, picture, indication of allegiance (Autobot, Decepticon or other), function, a quote, a description of the character, and numerical values of the character's various attributes. Although only the numbers can be truly deemed "technical specifications", the entire card is usually referred to as the Transformer's tech specs. Each specification is rated by a value from 1 to 10, 1 being the lowest, and 10 being the highest.
The "Breakout Battle" set includes another take on a screen-accurate "Scrapyard Optimus Prime", featuring a brown paint wash on tan plastic. The set was a shared exclusive between Toys "R" Us, online retailers such as Big Bad Toy Store, and Myer in Australia. The set was released in Australia, Singapore, and Canada but never actually made it to retail in the U.S. The set also includes Rollbar and a Vehicon.

Optimus made his way to the Primal Basilica, where he found Perceptor standing over the Mistress of Flame's battered corpse. Unable to do anything for her, Prime activated the Basilica's defenses as a means of stalling Trypticon. Learning from Perceptor that Rodimus had given up the Matrix, the two entered the chamber of the Chorus of the Primes to have the Matrix returned to him. Desperate Actions However, Optimus revealed the Matrix was not for him, but rather for Perceptor, as he wanted to make sure it would be taken as far away from Trypticon's grasp as possible. He guided Perceptor to a secret exit from the Basilica and sent the scientist on his way. Run for Our Lives Warned by the Chorus to "beware the power of the Primes", Optimus charged back towards the battlefield and began attacking Trypticon, rescuing Victorion. Optimus led the Combiners in battle against Trypticon, but the Titan managed to hit him, sending him hurtling towards some sharp rubble. Thankfully, he was caught at the last moment by Fortress Maximus. In Good Hands
×