© 2019 Hasbro.com All rights reserved. All audio, visual and textual content on this site (including all names, characters, images, trademarks and logos) are protected by trademark, copyrights and other Intellectual Property rights owned by Hasbro or its subsidiaries, licensors, licensees, suppliers and accounts. By using this site, you agree to the Terms and Conditions of Use.
Categories: 3H Enterprises charactersAction MastersAutobotsConvoys (Transformers)Devil's Due charactersTransformers automobilesFictional characters introduced in 1984Fictional commandersFictional refugeesScience fiction film charactersFun Publications charactersGo-BotsTriple ChangersMaximals (Transformers)PowermastersPrimes (Transformers)Robot superheroesSpy ChangersTransformers AlternatorsTransformers characters in video gamesTransformers: Energon charactersTransformers: Prime characters
The lowest priced toys in the Armada line were three-packs of Mini-Cons. Each larger price point consisted of an Autobot or Decepticon who came with a Mini-Con partner. Mini-Cons could be used to unlock a variety of features on each larger robot, such as firing weapons, electronic lights and sounds, or alternate modes. Some three-pack Mini-Cons combined into other forms or had additional features. According to the storyline, Mini-Cons also enhanced the power of other Transformers, giving incentive to collect as many of them as possible.

Available exclusively at Hasbro Toy Shop and their booth at San Diego Comic-Con 2011, this version of Ultimate Optimus Prime is presented in vehicle mode, packaged into a large, foil-embossed bubble packaging (similar to late Alternators packaging) styled after Optimus Prime's trailer, with an additional foil-embossed sleeve styled after the hood of Optimus Prime's truck. Exclusive to this release is a set of stickers one can apply to the trailer. The toy itself is otherwise identical to the regular retail release.
Hot Rod appears in All Hail Megatron , while traveling through space by himself, he found himself under attack by the Torment, a Decepticon warship crewed by Bludgeon and the Pretender Monsters. He was shot down, but managed to transmit a distress call to the Autobot starship Trion, which came to his rescue. After the Decepticons were chased off, Hot Rod joined the crew of the Trion. When the Decepticons' galaxy-wide assault hit, the Trion was shot down over Cybertron. Hot Rod sent out a distress signal and was ecstatic when he ran into some other Autobots. Hot Rod was taken back to base and relayed the story of how he and his other crew-mates from the Trion arrived on Cybertron, having been diverted there by Decepticon ships and forced to crash land. Once on the surface, Hot Rod sent out his distress signal and was so sure someone heard it. Kup arrived with the rest of the Trion's crew at that point, just in time to tell Hot Rod of course no one heard his message. After the Autobots narrowly avoided the Insecticon swarm and Sunstreaker sacrificed himself, Hot Rod jumped to Drift's defense when he was being insulted by Bumblebee. When the Autobots were later rescued by Omega Supreme, Hot Rod was glad that he sent out the distress call. He was then ferried to Earth with the other Autobots aboard Omega.
The live-action Transformers movie was slated to premiere in the U.S. on July 3, 2007, and was a joint collaboration among DreamWorks SKG, Paramount Pictures and Hasbro, Inc. Paramount Pictures was slated to release the film in the United States, as it had by now made DreamWorks Pictures one of its wholly owned subsidiaries, and was also to be responsible for the international release of the film through United International Pictures, its joint venture with Universal Studios. The feature was directed by Michael Bay from a screenplay written by Alex Kurtzman and Roberto Orci. It was a new story, set apart from the previous incarnations of the cartoon(s) and comic(s). A new origin and characters were introduced. Steven Spielberg, who with Jeffrey Katzenberg and David Geffen had established DreamWorks SKG, was the main executive producer of the film, with Lorenzo di Bonaventura, Tom DeSanto and Don Murphy serving as co-executive producers. In practice, this meant that they were the primary financial sponsors of the film.
The earliest version, as shown in the first patent application for the toy, was to have the Prime cab be a triplechanger, turning from truck cab to jet or robot[3]. The nosecone of the jet and robot legs were released by the Powermaster lock in the same fashion as the legs in the final version. Optimus would have had winged arms in non-super robot mode. The super robot mode's head was also integrated into the trailer's hitch... and lacked a faceplate.
The only differences with the unreleased version, aside from the packaging, are that silver paint has been added to the previously unpainted grill/fender area, the blue paint operations have been changed to teal, and the red Autobot insignias have been replaced by purple Decepticon ones. Prime's bio apparently explains that he took on this new color scheme in order to infiltrate the Decepticon ranks, in response to recent attacks by some new Decepticon forces pretending to be Autobots.
Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.
They’ve been invaded by pop culture favorites, too. Robot Chicken turned the couch gag into stop-motion animation, they’ve parodied Breaking Bad and the Game of Thrones opening sequence, and the living room has gone all topsy-turvy M.C. Escher-style. But best of all, for our purposes, was when the five Simpsons drove into the living room as familiar vehicles, then transformed into robo-Simpsons. Baby Maggie was a blue Volkswagen Beetle, clearly as an homage to Bumblebee, despite the odd color choice. Perhaps it was it was switched to match her onesie.
The first commercialized yo-yos in America were sold in vast majority by entrepreneur Donald Duncan and children couldn't get enough of them. The design was elementary: two wooden or plastic discs, connected by an axle with a string tied to it. To keep the user from flinging the yo-yo comically through the nearest window pane, the string featured a tiny finger loop at the opposite end. A loop that, as we all remember, tightens relentlessly with each toss until the finger tip is a healthy shade of purple.

Of particular note to Prime completists is that this otherwise traditional reissue of the Generation One Prime cab has a brand-new head sculpt which is essentially a miniaturisation of the Masterpiece/20th Anniversary Prime's noggin. Not only does this give the "classic" Prime toy a more show-accurate head, it's also the first iteration of this familiar mould in which the head is actually poseable. Being one of the better-articulated early Generation One toys, Prime can finally look in any direction he can aim.


In just seven years, from 1997 to 2004, the number of elements in the company’s inventory exploded, ascending from slightly more than 6,000 to more than 14,200. So did its range of colors, which climbed from the original six (red, yellow, blue, green, black, and white) to more than fifty. As the number of components and colors mounted, soaring supply and production costs plundered the company’s bottom line. Here’s why.
A large, non-transforming toy that features light & sound effects and voice tracks by Peter Cullen. The figure itself is a representation of Optimus Prime combined with Jetfire's parts - only designed for younger children. A lever on his waist extends his wings, and flying sounds are emitted when he is moved around off the ground. The Power Bots line replaces the 2007 Cyber Stompin' line of the first film.
He does not come with his Mini-Con partner Over-Run in this release; instead, Optimus Prime and his wave-mate Demolishor debuted a new brand of Cyber Key: retooled from the standard Cybertron style key, this version lacked a sculpted insignia, so that any symbol could be tampographed on to it, and featured a Mini-Con-style Powerlinx socket on the back, allowing it to operate the figure's formerly-Mini-Con-activated "punching" feature without the figure itself having to be retooled.

If they took the left passageway, the group happened upon Megatron’s lab. Though Megatron attempted to trick Optimus into activating the Fortress’s self-destruct sequence, Optimus was too clever to be duped. After deactivating both the Destruction beam and the Decepticons themselves, the Autobots found Jessie tied up in a cell. The Autobots then celebrated their victory by guzzling a few quarts of fine-grade oil.
After their own Optimus Prime disappeared, Scavenger and Smokescreen discovered an alternate version of Optimus Prime lying unconscious and barely alive in Autobase Earth. Though Red Alert did what he could, the mysterious Prime reactivated only long enough to utter a cryptic statement about the walls crumbling and the coming of chaos, then died. Worlds Collide, Part 1 of 4
Asia Premium Series Optimus Prime Ultimate Edition is an extensive screen-accurate redeco of Jetwing Optimus Prime (with a maskless head from Buster Optimus Prime), this figure features loads of accessories from the Striker & Jetwing figures, and includes brand-new knuckle and battle hooks based on the HFTD Optimus', which can be installed in either hand. The figure lacks the chrome of previous releases, instead opting for silver paint. The pin-striping is also absent, but he does have painted pupils. The figure also features 2-2-1 articulated fingers, which the first Leader Class did not have due to budget cuts. The ion cannon included lacks the black paint application, leaving it completely silver. When purchased from select retailers, this toy will also include a shiny metal number plate and a bonus mini AllSpark cube accessory. His instructions depict a weaponised mode which has some clearance issues, as his Gatling guns are shown attached to the jetwing, which pushes against his arms. His Eliminator Gun and Assault Blaster cannot tab into the Gatling gun tightly either.
Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.
Part of the first wave of Age of Extinction Custom Kreons, this Optimus comes with a buildable parts rack on which to hang/store his many many extra pieces. His "normal" helmet and blaster are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens) plus a spare hand, as well as a buildable battle-axe, a buildable smokestack-pack, and an extra Wheeljack-style wing-pack.
Having been removed from toy store shelves after 1985, Optimus Prime was made available as a mail-away toy in the "Digital Doom on the Highway to Destruction" offer in the US in 1986 to coincide with the Transformers movie premiering that year. He cost $21.50 and 5 Robot Points. He was also offered in 'The Autobots Have A Special Mission For...' mail-away pamphlet and came with a special "Movie Edition Certificate" and a round sticker that read " Movie . Edition . Transformer" with the Autobot symbol in the middle. (This item is considered rare.)
Not depicted in the instructions or stock photos, Roller can attach to Prime in vehicle mode via two tabs on the vehicle front which slot into two corresponding slots on Prime's feet. Another undocumented feature is that the butt of the Ion Blaster can be inserted between the barrels of Roller's weapon mode to form a longer weapon. Also not shown in the instructions but depicted on the stock photo on the card-back is that Prime's shoulderpads can be rotated up; the intended positioning for this is notched, although you can position them at other angles.
After the events of Transformers Animated the Stunticons set up a Stunt Convoy show in the city of Kaon and use it as cover to attempt to break Megatron out of his detention at Trypticon. Their attempts are thwarted thanks to the efforts of Cheetor, Optimus Prime, and Sideswipe. The Stunticons are placed in detention with Megatron and an attempt to rescue them was made by the Decepticons Blot, Mindwipe, Oil Slick, Scalpel, Sky-Byte, and Strika.[143]

The 2010 Transformers "Reveal the Shield" Legends Class Optimus Prime sculpt in the deco from the first Chronicle EZ Collection wave (see below) was released as a "Dollar Store" exclusive (available at stores such as Dollar General and Big Lots) in generic 2010 Transformers packaging packaging alongside Starscream, Bumblebee and Megatron. The initial release saw the copyright year removed, while a later running change variant featured the new tooling originally used for Generations Legends Class Motorbreath, with not only the retooled hands and a hole on the back of his head/top of his vehicle mode compatible with 3mm posts, but also Motorbreath's sword accessory.


Towering at only barely over two inches, this was actually not just the smallest movie-verse Optimus but even the smallest transformable figure of Optimus Prime for a while - ironically enough, being even slightly tinier than the Smallest Transforming Transformers Optimus Prime - that is, until he was later "out-tinied" by two other cute super deformed versions.


When Jazz brought Steve Guymo to the Autobot base, Optimus and the other Autobots realized that the Decepticons were behind the abduction of humans from airports across the nation. They were able to find the captive humans, whom the Decepticons were intending to ransom to the US government, and free them before engaging Starscream and his squad in battle. With the Decepticons defeated, the Autobots returned to base where Optimus thanked Steve for his help. Sun Raid (Listen 'n Play)

A late-run extensive redeco of the Super Base Armada Optimus Prime toy, "Powerlinx" Optimus Prime sports the darker color scheme the character takes on in the Armada cartoon episode "Origin" following a Mini-Con power-up, but he is not precisely show-accurate—the deco would later be fine-tuned with more accurate details for release in Japan as the Magna Convoy DX giftset (see below). In addition to now sporting fully-mobile Super Mode arms without the movement-impeding tabs, Prime still comes with all his features and accessories, though for this release, his Mini-Con partner Sparkplug got retooled with a new rear chassis and a blinged-out golden chrome body as "Corona Sparkplug".
Exclusive to Walmart, this Deluxe Class Optimus Prime is an all-new mold, close in scale to Voyager Class Megatron. He has a high range of motion, with ball jointed shoulders and hips, swivels at the neck, knees, and feet, and double swivels in the elbows. As a result of the transformation process, he can also rotate at the waist, though this is hindered considerably by his "backpack" kibble. This can be remedied by pointing the truck nose downward, as it is in the packaging. Optimus Prime also features the spring loaded "Automorph" feature in his head, if the truck kibble pushes the small grey switch from his back before splitting the chest into half.

This figure was only available in a two-pack with a Voyager Class Grimlock figure. The two-pack was exclusively available at Target stores in the United States, Canada and Australia, at Tesco stores in the United Kingdom and Hungary and at Galeria Kaufhof department stores in Germany. In Asia, most of the remaining stock are available in some hobby shops and some video stores like Speedy Video.


In light of this news, if Optimus decided to nonetheless head back directly to Autobot headquarters, his squad returned to find their comrades nearly dead from the poison. But with Ratchet’s help, the antidote was quickly distributed, and the Autobots sprung back to life. Now cured, the Autobots discussed their next course of action; they had to prevent the Decepticons from poisoning the nearby water reservoir.
In robot mode, like Combat Hero Prime, the bottom of the truck became his familiar windowed chest based upon the original Optimus Prime toy. His main gimmick was light up LED headlights, and a lightpipe in the bottom of his right fist, illuminated by an LED in his right forearm, that would illuminate his clear sword or his double-barreled rifle if they were used in that hand. All three LEDs were activated simultaneously by pressing the sunroof-like depression on the roof of the truck.
For accessories, he comes with (according to his bio) "the ancient weapons of the Primes", such as his Nexus Sword (a reference to Nexus Prime), the Vector Shield (an upscaled, non-transforming version of the shield from his Cyberverse "Beast Blade" toy, and a reference to Vector Prime), as well as a generic cannon with a pressure-fired missile. All of his accessories can peg into his hands, right forearm, backside, and vehicle sides.
Having launched a painstaking review of each of those 14,200 pieces in the LEGO universe, the Design Lab found that 90 percent of new elements were developed and used just once. And many components were duplicates. Among the dupes were eight minifig police officers and six minifig chefs, with barely decipherable differences between them. The Lab dealt with the redundancies by slashing the total number of components by more than 50 percent. When it reduced the product portfolio’s minifig chef population from six to one, designers protested and longtime fans howled. To calm the fans, LEGO tried humor: it held a mock online memorial service for the “dead chefs.”

Available exclusively at Hasbro Toy Shop and their booth at San Diego Comic-Con 2011, this version of Ultimate Optimus Prime is presented in vehicle mode, packaged into a large, foil-embossed bubble packaging (similar to late Alternators packaging) styled after Optimus Prime's trailer, with an additional foil-embossed sleeve styled after the hood of Optimus Prime's truck. Exclusive to this release is a set of stickers one can apply to the trailer. The toy itself is otherwise identical to the regular retail release.


Great read. I have noticed an absolute drop in quality myself. My sets in my youth range from 83 to 90. My sons are from 2011 and there is a clear distinction. Aside from the weight of identical bricks being different, the older bricks stay together in a much more durable way than the new bricks. To test this, I created the same models using all old bricks and all new bricks and the difference was marked. I understand doing certain things to reduce costs, but not at the expense of quality…

When you’re a Cybertronian robot-alien who could easily blow any human to bits if you wanted, having a license plate can’t be that important. Really, if you’re in car mode and a cop pulls you over for not having plates, and sees that you also don’t have a driver, and then perhaps sees you turn into a giant robot, what exactly is that cop going to do?


This Optimus Prime is a redeco of the figure above, featuring red wheels and various Tech Spec-sque patterns on the legs & chest which can be decoded with their transparent red weapons, which is molded in a sprue similar to the ones used for the Arms Microns kits & Robots in Disguise (2015) Mini-Con figures. He can use any weapons included in this set, although his primary weapon is an axe.


Hasbro executives, high off the revival of G.I. Joe through the same marketing concept, decided to acquire rights to toys from a variety of Japanese “Super Robot” series. Transformers didn't introduce the concept of super robots to the United States, but for the first time, the genre became widely recognized and popular outside of Japan. As the Transformers brand grew throughout G1, it began to define the genre, and all other super robots were measured competitively to Transformers' standard.

Released to conclude the 10th Anniversary of the live-action film series, Masterpiece Movie Series Optimus Prime is a brand new mold that transforms from a 25cm-tall robot (a little taller than MP10 Convoy) resembling how the character appeared in the first live action movie into a Kenworth W900 modified Peterbilt 379, with many of the engineering cues being distinctively based and improved on the ROTF Leader Class mold. His transformation takes a whooping 43 steps, making it one of the most complex Masterpiece figures to date! (Although this pales in comparison to MP-36 Megatron's 107 steps.) .
It took two further years, but this figure was eventually released as part of the Japanese counterpart to the Alternators line (Binaltech) in 2008. Binaltech Convoy features some additional paint details, like his silver pelvis, additional patterns on his shoulders, and red paint on his engine-gun, and like all Binaltech figures, he also includes die-cast metal pieces. Unlike previous Binaltech releases, a bio-card was not included.
ROBOTKINGDOM.COM Newsletter #1462 Hi, Here is a quick update from www.robotkingdom.com.  #1 Hot Items! Flame Toys : Transformers Star Saber. Preorder. Available in May 2019. US359.90 http://www.robotkingdom.com/ftstarsaber.html Flame Toys [Furai Model] - Bumble Bee. Preorder. Available in May 2019. US44.90 http://www.robotkingdom.com/4897054512308.html Takara Transformers Masterpiece MP-34 Masterpiece - Read More
For Transformers: Age of Extinction, Optimus Prime initially transforms into a rusty 1973 Marmon semi cab-over truck and later on a new alternate mode in a blue and red Western Star 5700 Custom semi-truck.[31][32] After humanity turns on all Transformers, regardless of faction, Optimus and the other Autobots go into hiding. Eventually, they find themselves being hunted by a rogue organization called Cemetery Wind. Optimus is severely injured in a trap set by the group, while many of the other Autobots, including Ratchet and Leadfoot, are slain. An inventor, Cade Yeager, comes to Prime's aid and helps restore his health. After uniting with a small band of Autobots, Optimus faces Lockdown, a ruthless bounty hunter allied with the humans, and KSI, an organization that produces man-made Transformers. Optimus is captured by Lockdown, but the Autobots rescue him. Optimus is quickly losing faith in humanity, but at the urging of Cade, chooses to stay and fight a resurrected Megatron and his new army. Prime awakens the ancient Dinobots, and rides a newly tamed Grimlock into battle through Hong Kong. He kills Lockdown and Harold Attinger at the film's climax as revenge for killing many of his friends, including Ratchet and Leadfoot. At the end of the film, he leaves Earth and flies off into deep space, seeking to find out the truth about his mysterious Creators.[33][34]
While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth. With the Decepticons defeated, the Autobots entered into an even closer relationship with Earth. The Autobots also began the colonization of other worlds, the first of which was the planet Athenia, where Optimus Prime was stationed. It soon became apparent, however, that the consequences of releasing the energy of the Matrix to cure the Hate Plague were more far-reaching than Optimus had anticipated. Without the energy of the Matrix to act as a balancing factor, Vector Sigma had become destabilized. The Decepticons suddenly returned to exploit this, assaulting Cybertron in order to seize control of the mega-computer. Prime took a squad of troops to aid in the battle on the planet. When the arrival of the Autobot Headmasters tipped the battle in their favor, Prime broke off from the main attack and headed down into the depths of the planet, planning on stabilizing Vector Sigma at any cost.
Optimus made his way to the Primal Basilica, where he found Perceptor standing over the Mistress of Flame's battered corpse. Unable to do anything for her, Prime activated the Basilica's defenses as a means of stalling Trypticon. Learning from Perceptor that Rodimus had given up the Matrix, the two entered the chamber of the Chorus of the Primes to have the Matrix returned to him. Desperate Actions However, Optimus revealed the Matrix was not for him, but rather for Perceptor, as he wanted to make sure it would be taken as far away from Trypticon's grasp as possible. He guided Perceptor to a secret exit from the Basilica and sent the scientist on his way. Run for Our Lives Warned by the Chorus to "beware the power of the Primes", Optimus charged back towards the battlefield and began attacking Trypticon, rescuing Victorion. Optimus led the Combiners in battle against Trypticon, but the Titan managed to hit him, sending him hurtling towards some sharp rubble. Thankfully, he was caught at the last moment by Fortress Maximus. In Good Hands
The Hot Rod from the future animated movie continuity would also appear. Target: 2006 had Hot Rod, Kup and Blurr timejump from 2006 (specifically partway through the Transformers movie) to 1986 to thwart Galvatron's scheme, under the influence of Unicron; later post-movie stories revealed that Firebolt had died on Earth years before 2007, and Space Pirates had Rodimus Prime briefly reverting to Hot Rod during the Quintesson attack on Autobot City. This Hot Rod also appeared in several of the "Aspects of Evil" stories. Told from the flashbacks of an aged Rodimus Prime, these had Hot Rod come up against some of the greatest Decepticon villains. He accepted the surrender of Scorponok - only to wind up defending him and a human town against the Micromaster Air Strike Patrol: defending Autobot City from a full-scale attack by Shockwave: and being captured and used as a pawn by Megatron to flush out an Autobot spy in his ranks. (Marvel UK #223-227)
When the Ark's sensors picked up two Transformer power emissions in the Brazilian rain forest of non-Decepticon origin, Optimus headed into the field to investigate, bringing along Jazz and Blaze. Though their search went poorly at first, the surrounding vegetation interfering with their energy trackers, one of the mystery Transformers soon found them! The source of the readings turned out to be two terrifying robot dinosaurs! As Optimus charged one of them, Megatron and his troops turned up, and blasted the Autobot leader unconscious. He awoke to find the Decepticons fleeing in defeat, and the creatures transformed into their Autobot forms. Grimlock introduced himself and Snarl, but told Optimus that they wouldn't be following the Autobots back to home-base, as they had two more companions to unearth first. Optimus bid him farewell with a handshake before leaving to carry on the war against Megatron. The Dinobots!
The Animated Tech Spec written by Derrick J. Wyatt in Hasbro Transformers Collectors' Club #24 states that Rodimus as having the rank of Prime and clearly being the leader of a team like Optimus and Sentinel. His toy is listed as "Rodimus Minor" which Hasbro explained at San Diego Comic-Con 2009, was because "there were already too many Primes in the toy line". Within the series, he is only ever called or credited as "Rodimus".
A Japanese-exclusive, the final new-design G1 Convoy toy was a departure from previous versions. He now transformed into a small extended hood cab truck of made-up model pulling an implausibly large trailer equipped with motorized caterpillar treads. The trailer could additionally pull along the auxiliary trailer transformer Grandus, on which the shuttle Sky Garry could land, forming the spaceship "Battlestars". Even without combining, Star Convoy's truck mode was a behemoth, including a Micro Trailer semi as a small accessory and an upgraded Roller that was now patterned after a tracked ballistic missile carrier.
Part of the eighth wave of TakaraTomy Go! toys, Optimus Exprime is capable of changing from a robot to either a train or (something resembling) a dragon and back again. He can also form the torso of either DaiKenzan (with Kenzan forming the upper torso, head, and arms and Gekisoumaru forming the legs) or DaiGekisou (With Kenzan and Gekisoumaru reversed from their roles in DaiKenzan).
Rodimus also appeared in the Dreamwave Energon Comic. In this continuity Rodimus's history in unclear, but he seems to be a veteran Autobot assigned to Earth. He acts as a mentor to many of the less experienced Autobots: for example he was the first to congratulate Ironhide when he overcame his fears to defeat Tidal Wave. He was one of the defenders of Toronto alongside Hot Shot, Red Alert, Hoist, Beachcomber and Thrust, battling against Divebomb and a swarm of Terrorcon clones before receiving help from a very unlikely source - Megatron, resurrected in a new body by Optimus Prime. The subsequent counterattack routed the Terrorcons.
Part of the first wave of TakaraTomy Go! toys, Hunter Optimus Prime is a redeco of the Voyager Class Beast Hunters Optimus Prime toy. His red and blue plastics are now cast in metallic shades, his translucent green plastic has been replaced with translucent blue, his yellow highlights are more orange-yellow, his yellow-painted side windows are now blue, and his gray plastic is now cast in two different, darker shades. The Matrix Saber, aside from being blue, uses a bluer shade of gunmetal paint for its hilt and handle.

Exclusive to Japanese ToysЯUs stores, this redeco of AM-01 Optimus features warmer, metallic shades of plastic, replaces the gray plastic around his windshield-chest with red, and replaces the clear-blue plastics with clear-black. He comes with the Hasbro version's battle sword, which is now a darker, warmer shade. For Arms Microns, he now comes with O.P. A, Pral G, Sais G, and Jayz G, and the latter three can combine to form a golden version of the Cosmotector shield (hence the name).

The percentage in the title is not a turn of phrase nor something inferred in any way, it comes from a quote by Bumblebee movie producer Lorenzo Di Bonventura. Whether Bumblebee is a prequel or reboot (or anything in between) has been a hot topic for fans , especially those who want to distance themselves as much as possible from the previous films made by Michael Bay. These debates have reached Bonaventura who sat down with Metro and explained why to him, the Bumblebee film was 100% a prequel - Read More


Unlike previous Convoy toys, the cab section did not separate from the trailer, instead forming the arms of his imposing 12-inch tall robot mode. He lacks any sort of leg articulation in this mode, but his battery powered treads can provide him with locomotion. Star Convoy's chest can open to reveal a control center for Micromaster figures such as his partner figure Hot Rodimus to ride in.
Articles to be expanded from December 2011 Articles with invalid date parameter in template All articles to be expanded Articles lacking in-text citations from December 2009 All articles lacking in-text citations 3H Enterprises characters Action Masters Autobots Convoys (Transformers) Devil's Due characters Transformers automobiles Fictional characters introduced in 1984 Fictional commanders Fictional robots Film characters Fun Publications characters Go-Bots Triple Changers IDW Publishing characters Maximals (Transformers) Powermasters Primes (Transformers) Robot superheroes Spy Changers Transformers Alternators Transformers characters in video games Transformers: Energon characters Transformers: Prime characters Dreamwave Productions characters Optimus Prime
When the long-lost Titan Masters reemerged into modern society and joined the Autobot-Decepticon war, Optimus Prime was partnered with the Titan Master Apex, who carried a portion of Prime's spark, boosting the legendary commander's already formidable abilities. Titans Return Apex/Powermaster Optimus Prime toy bio On Velocitron, Optimus Prime was present for the biggest race of the year when Scourge and Crashbash arrived and attempted to botnap Hyperfire. Optimus ordered Sentinel Prime and Hardhead to battle against them. Later, Optimus was part of a battle on Cybertron against Soundwave. During the battle, the Autobots' base Fortress Maximus transformed to thwart the Decepticon advance. Optimus Prime declared that to defeat the Decepticons, the Autobots would need to master the power of the Titan Masters. Titans Return: The Power of the Titan Masters
The Optimus Prime Kreon in this set is based on the character's rusty, crusty "evasion mode" from the Age of Extinction movie. He has a ferrous-metal backpack, which is used to interact with the magnetic parts in the various sets. In this specific set's case, it's so he can be grabbed by the buildable Strafe's dino-claws, once Strafe uses said claws to open up the "laser" cage made to contain Optimus. (Yeah, we know Strafe appears way after Optimus ditched this look in the movie.)

In the Japanese exclusive Transformers: The Headmasters storyline (which replaced the "Rebirth" finale in Japanese continuity), Hot Rod appeared as part of Optimus Prime's inner circle. When Galvatron and his Headmaster warriors launched a devastating attack on Cybertron, Vector Sigma was damaged, and Hot Rod was sent to Earth to retrieve the Matrix. Recovering it, he returned it to Prime, only to be surprised when the ghost of Alpha Trion once again reformatted him into Rodimus Prime to help Optimus. After Prime's second death, Rodimus once again took command of the Autobots. However, when Scorponok destroyed Vector Sigma, Rodimus decided to leave the war, and left Fortress Maximus in command of the Autobots.
Optimus Prime was subject to several molding and color variations in his early days. The earliest release of the figure featured larger fists, a gun with a thick, round barrel, a slightly-differently shaped gas pump, grey rockets, a grey Roller, a grey launcher in his Combat Deck, and metal plates in the floor of the Combat Deck (a holdover from the Diaclone version of the toy, to which the magnetic feet of the pilots could cling). In short order, his fists were slimmed down, the gun's barrel was pared down to a more slender form, the gas pump's shape was altered, the rockets and launcher were recast in black plastic, the metal plates were removed from the Combat Deck, and Roller's color was changed to a light blue. Along with Roller's color change, however, the Combat Deck's drone pod also became light blue, and a third running change soon followed that saw it restored to its original darker blue, and Roller changed along with it. These modified components would become the default accessories used by subsequent reissues of the Prime toy would take, though Roller stills fluctuates back and forth between grey and dark blue, depending on how show-accurate each reissue wants to be.
×