Part of the third wave of 2012-onwards Generations Legends Class toys, Thrilling 30 Optimus Prime is a new mold that is roughly the same size as a Cyberverse Commander Class toy. Both his truck and robot mode are based on his Don Figueroa-designed body from IDW's ongoing series, and features 5mm-compatible hands and roof. He comes with an Ion Blaster which has both 5mm and 3mm posts.
Optimus Prime comes with many accessories in addition to the aforementioned Matrix, including the character's traditional laser rifle, now termed (and henceforth known as) an ion blaster. The initial release of the figure cast the ion blaster in grey plastic, but later assortments recast it in its more familiar black coloration. Other accessories include a transparent orange energon-axe that plugs into either wrist when Prime's fist is retracted, and even a non-transforming gun mode Megatron weapon, with removable stock, silencer and scope accessories, in homage to several instances in the Generation 1 cartoon when Prime was forced to wield his enemy. Pack-in bonuses that came with the figure included an inner cardboard tray illustrated to resemble the interior of Prime's Combat Deck, and in later releases, a small poster drawn by Pat Lee.
Towering at only barely over two inches, this was actually not just the smallest movie-verse Optimus but even the smallest transformable figure of Optimus Prime for a while - ironically enough, being even slightly tinier than the Smallest Transforming Transformers Optimus Prime - that is, until he was later "out-tinied" by two other cute super deformed versions.
For this re-release of Masterpiece Convoy, Takara submitted to the biggest desire fans had for the figure and produced a full-size, fully transforming plastic and die-cast metal trailer. The trailer opens up into Convoy's Combat Deck, with storage for its accessories and a functional repair drone, though Roller is conspicuous by its absence. Like the original Combat Deck, the drone can extend through holes in the roof and front of the closed trailer, and the interior has enough room to accommodate one Alternators figure in vehicle mode. Some reports suggest that the paint on this figure's chest chips more easily than past editions.
The Japanese release of the figure also underwent the changes in weapon shapes, but never featured a silver Roller; instead, their original release of Prime featured a Diaclone-style Roller without the two rear pegs, and the differently-shaped launcher that accommodated him, before a running change switched over to the Hasbro version of the mold. Finally, in some European countries, Prime sported red feet, as opposed to his traditional blue; this version of the figure is also known in some cases to feature a differently-painted forehead crest which leaves the three central indentations unpainted blue.
The Hasbro stock photos of the toy is slightly mistransformed: his pectoral armor is not folded correctly in robot mode. At least a very small number of units feature a faceplate-less head sculpt which was probably intended for a later retool, but so far there is no news about this pretool being released in the future. This figure was also released in Toys R Us Japan in May 1st, 2017 as a store exclusive, likewise identical to the Hasbro release.
Prime would make one further surprise appearance in Dreamwave's Transformers: Armada series. With Optimus Prime having disappeared to an alternate dimension, devastated by Unicron, the Autobots attempted to find their leader. As Jetfire attempted to locate him through Spacebridge links to other dimensions, one of these clearly shows RiD Optimus Prime and Prowl.
Released to commemorate the 10th anniversary of Revenge of the Fallen, this Studio Series Optimus Prime is a retool of the figure above, featuring many new parts, namely a new backpack, chest piece, and a pair of non-transforming fenders/legs, to better resemble his appearance in the first two movies. These new parts allow him to combine with Studio Series Jetfire to form "Jetwing Optimus Prime." His color scheme features a much higher contrast than the previous release. Instead of Energon Swords, he now comes with an ion blaster like that used in the battle of Mission City. He also comes with a cardboard backdrop display depicting the highway fight with Bonecrusher from the first Transformers film.
General Hawk stated in an interview that his typical transportation in Axiom Nexus was his Convoy colleagues. As the seats of General Optimus Prime's vehicle mode were manufactured at the same location as the VAMPs of his universe, Hawk was able to find a degree of familiarity in the strange world of Axiom Nexus. Andromeda - Axiom Nexus News, 2016/05/01

Available as part of the exclusive Street Fighter II × Transformers toyline, "Convoy" is a redeco of Titans Return Voyager Class Optimus Prime in Ryu's traditional colors, fleshtones and all. He transforms from robot to tanker truck to plane and back. Both vehicle modes have "cockpit" areas to seat any Titan Master (or compatible) figure. Like all Titans Return Voyager class figures, he has built in mechanisms to "bulk up" his noggin. In his case these are spring-loaded pylons. The smaller Headmaster's robot mode is also painted to resemble Ryu.

JETWING OPTIMUS PRIME Black Ver. is a black, teal, and chrome redeco of Jetwing Optimus Prime exclusive to the Asian market. He appears to have been based on the cancelled TakaraTomy contest prize Jetwing Optimus Prime Black Version (see above), with a few color alterations here and there, plus the obvious addition of chrome. It was originally solicited by online retailers as the far goofier-sounding "Dark Nightwatch Jetwing Optimus Prime".
The TakaraTomy version, part of the seventh wave of Japanese Prime toys, is dubbed Arms Master Optimus, uses darker, metallic plastics, casts the backs of his thighs in metallic red, replaces his metallic silver paint with glossy gray, and replaces a few of his paint operations with customer-applied foil stickers, such as his insignias, shins, headlamps, the tiny yellow lights on his torso, and the blue deco on his truck panel sides. He has also been retooled with additional 5mm pegs for his thighs, roof, and lower backpack, as well as ports for his forearms, shoulders, smokestacks, fuel tanks, and roof. Instead of the rifle, he comes with a very large Matrix which can tab onto his chest as armor or mount onto the back of the truck cab, with the Matrix also being covered in 5mm posts and holes so that Arms Microns can be attached to it. He additionally comes with a clear-blue "Shining" version of the Arms Micron, R.A., who can combine with the Matrix to form the colossal Matrix Saber.

Produced as an action figure by the Japanese company Kaiyodo, the main selling point of the line is the 'Revolver' joint. This gives the figure a high degree of articulation, allowing for many dynamic and varied poses. Hot Rodimus is number 047 in the Yamaguchi series, and comes with extra sets of hands, a pair of pistols, an extra head (which is molded with his binocular vision, as seen in The Transformers: The Movie) and a display stand.
The original Optimus Prime toy was a re-deco of the Diaclone Battle Convoy toy and transforms into a late 1970s red Freightliner FL86 Cab-over-Engine triple-axle semi trailer truck. The truck mode features rubber tires, and the cab is partially constructed of die cast metal. The windscreen section can open to reveal ultimately-unused seats that were originally designed for driver figures part of the Diaclone line. His trailer opens up into his Combat Deck, which features a missile-armed repair drone pod (with seating for one) mounted upon a boom lift arm. Situated in the base of this boom is a spring-loaded launcher that can be used to launch Roller out of the Combat Deck. Roller himself has seating for 4 passengers, and can be equipped to carry Optimus Prime's rifle or a fuel pump. The interior space of the trailer allows storage room for one Autobot car. In robot mode, he is armed with a black laser rifle, that, due to design, cannot be held straight. His fists are separate pieces which must be stored elsewhere in vehicle mode; there are pegs to store them in the trailer.
A Deluxe sized version of Energon Optimus Prime. Looks like a smaller version of the Leader class toy, without any trailer or drones. Can Powerlinx with other Energon Autobot toys. This toy was a Toys-R-Us store exclusive in the U.S. and was packaged together with a downsized Energon Megatron. In Japan this toy was packaged together with Kicker and a Star Saber accessory.
For the Generation 2 toy line, the original Optimus Prime toy was altered somewhat and an electronic sound maker was added.[24] Later Generation 2 toys of Optimus were completely new designs, such as Combat Hero Optimus Prime, Laser Optimus Prime, and Gobot Optimus Prime, who could become a red Lamborghini car. In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film.[25] In 2006, Hasbro introduced Alternators Optimus Prime, which turned into a licensed 1:24 scale model Dodge Ram SRT-10.[26] In 2011, Takara Tomy released MP-10 Convoy, a smaller, more show-accurate version of the Masterpiece Optimus Prime figure.[27]
Epic Optimus Prime is a 22 inches tall, non-transforming Optimus Prime figure, featuring limited articulation in the waist, shoulders and wrists. His chest can be opened to reveal a command center with a seat and room to display at least three figures. His arms also feature one seat each to accommodate more figurines. The back of his arms and legs are hollow with "shelves" that allow even more figurines to be displayed.
Legends class Optimus Prime is an extremely simplified toy of the extremely complex movie design. As such, he features numerous unavoidable inaccuracies, such as not transforming or even looking very much like the original design or the larger toy versions in robot mode. However, proportionally Legends class Optimus Prime is not far off from the real truck and the Leader class toy's vehicle mode, aside from missing a smokestack on the driver's side. He is articulated at the shoulders and upper legs via ball joints. He can also hold small weapons, such as Cyberverse.

This reissue of the original Generation 2 Laser Optimus Prime figure was made using the modified version of the mold created for Robots in Disguise Scourge, lacking the sculpted Generation 2 Autobot insignias on the disks featured on the original. It sported a modified deco, with the flat grey plastic on both the trailer and Prime's chest now replaced with silver chrome; additionally, new Autobot symbol tampographs were added to the doors of Prime's cab mode and the front end of his trailer, and a pair of new chest-window stickers featuring an illustration of the Matrix of Leadership replaced the original decals.
The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.

You've got to love it when Amazon tries to be coy by sticking with code names while giving us a full look at the figure. That doesn't seem to be changing any time soon, the latest cases being our first look at stock photos of two Cyberverse Scouts on Amazon.com.au. This time around it's Ratchet under the name "Aces" and Shadow Striker under the name "Rockhounds". We got a look at these two in bot mode at New York Comic Con and later we got CG pictures, but this is our first look at both modes - Read More
Rodimus appeared in the text-based fiction Dungeons & Dinobots as one of the Autobots who attacked the Arch-Ayr fuel dump. Sent to capture rogue Dinobots for the Autobots, he was part of the group that captured Swoop. Together with Blurr, he then tracked Grimlock, but ran into competition with the Decepticon allies Sideswipe and Cliffjumper. After Grimlock bit off his left hand Ratchet replaced it with a circular saw (a reference to one of the original Rodimus' melee weapons in The Transformers: The Movie).
Marissa and Prime are now on the run from the EDC and are also frequently attacked by the mysterious "Legion" Transformers. When faced with such foes, Marissa unleashes her "Kiss Player" ability by kissing Prime, fusing with him once again, increasing his power so that he can best their opponents. Prime is armed with the Surf Blade, a weapon formed out of Marissa's surfboard, wielded expertly thanks to the knife skills Marissa passes on to him when they merge.[18]
Being only an inch and three quarters half, he is the second smallest transformable movie version of Optimus Prime around, only losing the first spot to the Q-Transformers version. Much like the normal-colors Bumblebee, he was available in both Series 1 and 2 of the line, with no noteworthy changes between releases. Not even their bag codes were altered. Their instruction books were updated to say "Series 2".
Dark of the Moon Voyager Class Optimus Prime is an all-new mold. He features heatshield details in his sculpting and translucent solar panels on various parts of his body, and huge gas tanks. Optimus himself is differently proportioned, having larger feet and a smaller torso and arms. He also features some faux-kibble/parts: His actual windshield chest is being covered by a sculpted panel featuring his characteristic deformed windshield-chest, and a pair of sculpted tires on his thighs. His pair of optics is designed to have a light-piping gimmick, but it was rendered useless since it was painted in smoke gray on top of the colorless transparent plastic.
The smallest of the Energon Igniters, the 3-inch Speed series transforms between modes in 7 steps or less. Unlike previous small movie figures, this series has a lot of detailing and articulation. The bots don’t end up looking like carved blocks of plastic. They could use a few more paint apps, but that’s to be expected at this price point. They even interact with cores sold with the larger figures (though “interact” in this case seems to mean “tow behind”).
Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[38] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[39]
×