A fourth version is shown in the 1987-88 Transformers product catalog that has several minor differences from both Powermaster Prime and God Ginrai, such as having God Ginrai's sliding fists but in red, a completely different trailer hitch assembly partially based on the third design, an offset Autobot symbol in base mode, extended feet also based on third design, far more detailed super mode outer leg panels, completely different front bumper, and the first instance of single faux shoulder smokestacks rather than two. It is still unknown as to why Powermaster Prime has completely different arms from God Ginrai or all earlier concept versions.
Hot on the heels of their licensing deals with Pepsi and Nike, TakaraTomy got themselves a slice of Apple™ pie and released Convoy —playing iPod speaker— as part of their small, musically-themed Music Label line. This version of Prime is an all-white redeco of the original Generation 1 cab robot, which (much like the "Marine Version" of Prime from the Sports Label line) makes it seem like he ought to be Ultra Magnus. The figure is actually even derived from the retool of the mold created for the original Ultra Magnus figure, as distinguished by the elongated hubcap pegs on the front wheels. Like Pepsi Prime before it, the figure's fists now store in peg holes on the under side of its trailer. The toy lacks any of the original Prime's stickers (even the silver stripe on his chest is now a paint operation) and includes the original thick-barrelled version of Prime's blaster. The toy features a brand new headsculpt based on the 20th Anniversary Prime figure, given additional poseability not previously seen on the figure by being mounted on a ball joint.
Hot Rod appears in All Hail Megatron , while traveling through space by himself, he found himself under attack by the Torment, a Decepticon warship crewed by Bludgeon and the Pretender Monsters. He was shot down, but managed to transmit a distress call to the Autobot starship Trion, which came to his rescue. After the Decepticons were chased off, Hot Rod joined the crew of the Trion. When the Decepticons' galaxy-wide assault hit, the Trion was shot down over Cybertron. Hot Rod sent out a distress signal and was ecstatic when he ran into some other Autobots. Hot Rod was taken back to base and relayed the story of how he and his other crew-mates from the Trion arrived on Cybertron, having been diverted there by Decepticon ships and forced to crash land. Once on the surface, Hot Rod sent out his distress signal and was so sure someone heard it. Kup arrived with the rest of the Trion's crew at that point, just in time to tell Hot Rod of course no one heard his message. After the Autobots narrowly avoided the Insecticon swarm and Sunstreaker sacrificed himself, Hot Rod jumped to Drift's defense when he was being insulted by Bumblebee. When the Autobots were later rescued by Omega Supreme, Hot Rod was glad that he sent out the distress call. He was then ferried to Earth with the other Autobots aboard Omega.
Minor note: Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
The character Optimus Prime appears in the live action films Transformers, Transformers: Revenge of the Fallen, and Transformers: Dark of the Moon as the leader of the Autobots and one of the main protagonists of the three films. In these movies, Optimus Prime is able to transform into a conventional Peterbilt 379 cab, rather than the cab over design of his original Generation 1 body. In Transformers: Dark of the Moon, he regains his first generation trailer. Also straying from the G1 design, Prime's vehicle mode is now decorated with red flames painted onto a blue body à la Rodimus Prime, his Generation 1 successor. The reason for the change was due to Director Michael Bay's decree that mass displacement does not occur when they transform, requiring Optimus's vehicle form to have more mass to achieve the desired size in his robot form.

A very limited number of Gold Masterpiece Convoy figures were given away in a Lucky Draw contest in Japan. The figure uses the same design as Masterpiece Convoy, but every piece, including the windows and weapons, is cast in a gold color, reminiscent of his electrum coating from the episode The Golden Lagoon. The only exception is the tires, which remain black rubber. It comes packaged in the usual Masterpiece Convoy box, with the only telltale sign being the gold lettering in the "Master Piece" label. It's not clear how many were made, but it is thought to be no more than 10 or 20.[1]

Though Prime's ultimate fate is unknown, in a story entitled "The Last Days of Optimus Prime", also from Transforce, Prime laments the new Transformers age without war and passes on to a Transformers afterlife, referred to as "J'nwan". The story is vague, however, and may be a metaphor for Prime rejoining the Matrix, as his time had come. In this realm, he was approached by the Predacon Sandstorm, who tried to plead for the help of Prime and the other legendary Transformers in dealing with a Unicron/Predacon hybrid named Shokaract. Prime refused, but later led a group of Transformers, including Megatron, Grimlock, and Soundwave), to distract the creature while Primus dealt the final blow.

The first Transformers toys were created from two different transforming robot toylines from Takara, the Car-Robots and Micro Change, from the Diaclone and Microman series, respectively. Hasbro acquired the rights to sell them in the United States but, instead of selling them under their original names, they were rebranded as "The Transformers". The first two years consisted primarily of reusing the Car-Robots/Micro Change molds. The earliest toys had some parts made of die-cast metal, which were eventually phased out.
A BotCon 2012 exclusive purple redeco of the Deluxe "Generation 2" Optimus Prime figure from the Generations toy line, with the sword's blade molded in clear yellow. Much like the 2008 Voyager figure, this figure has painted-in "battle damage" effects. The right side of the hood has the words, "I shall stand...", while the left side says, "The rest shall fall."
In robot mode, Voyager class Optimus Prime is proportionally more accurate to his CGI design than the leader class toy and has a more accurate headsculpt, but due to the aforementioned lessened complexity significant sacrifices had to be made, such as "cheats" to the transformation sequence, to achieve this and thus he is overall less accurate than he initially appears. In addition to previously mentioned changes, he carries much of the truck's front hood, grill and fenders on his back like a backpack. However, he maintains a superb level of articulation and posability.

Thanks to TFW2005 user Fc203, we have some screencaps from what appears to be a stop-motion review video featuring Studio Series Shatter, among other Transformers and non-Transformers toys. The screencaps give us a good look at her robot and alt mode as well as a few poses. Like her partner Dropkick, Shatter only comes with one alt mode. However, that alt mode is her car mode and not her aircraft mode; whereas Dropkick is the opposite. She also seems to be sporting a bit more of a generic head that isn’t quite movie-accurate, but the rest of the figure seems to pay a good deal of homage to her pre-jet mode on-screen model.
This Cybertron spin pop consists of a generic handle with an Optimus Prime sticker, topped with a figurine of Prime through which the included lollipop slots. When the handle is squeezed, a manual gear mechanism spins both the figure and lollipop—no batteries necessary! The handle was also redecoed in orange for a Megatron spin pop, with a figure of the Decepticon leader on top.
In true Prime style, forward portion of the vehicle mode detaches to become Prime himself, while the rear "trailer" transforms into a gun emplacement. In robot mode, the barrel of the truck's left cannon detaches to become a hand-held rifle for Prime, and the figure features an opening chest compartment concealing a removable Matrix of Leadership accessory. Prime's gigantic hands mean that he can't hold it especially neatly, but he can certainly grip hold of it. Atypical of both most Unicron Trilogy figures and indeed, Optimus Primes in general, Prime's hands are not designed to accommodate weapons with 5mm posts, instead featuring a small peg-hole in his palm that allows him to tightly grip objects designed to fit there, like his own rifle, Leobreaker's whip, Cybertron Wing Saber's swords, and Cybertron Metroplex's axe. However Cybertron Wing Saber's sword hilts will also act as adaptors allowing Prime to hold and use 5mm weapons.

A Deluxe class toy of Prime in his Protoform stage. One of the first released movie figures, Prime's Entry Mode resembles a huge metallic asteroid. With this figure standing 5.5 inches tall and Optimus being 28 feet (336 inches) tall, the toy is about 1/61 scale. This rock-like alternate mode has led some fans to sarcastically refer to the movie protoform toys as Rock Lords.
The TakaraTomy version of Premium Series Optimus Prime has a considerably different deco from Hasbro's release. Similar to the unique chrome Optimus Prime, Optimus Prime Battle Mode features vacuum-metallized parts for nearly all of the silver truck parts, for a greater resemblance to the polished chrome on the real prop trucks. Unfortunately, as his feet are the front fenders and grill, this will likely lead to chipping. In robot mode, he retains several decos that were removed from Hasbro's Premium Optimus Prime for cost reasons, such as the blue and gold decos on his thighs. Finally, the flip-out energy sword is coloured gold to reflect its "powered up" appearance.

From this chart, you can see that there has been no real trend in the price per piece in these particular sets. The weighted average (larger sets weigh heavier than smaller sets) for the price is 13.19 cents per piece. The size of the ships did seem to increase in the last couple years; however, 3 data points does not make a trend (I will visit this idea later). For those of you who had a pirate ship growing up (I was lucky enough to get the Skull’s Eye Schooner), you may not have realized it, but it wasn’t cheap. And, the prices in this chart do not take inflation into account.

Alternators Optimus Prime transforms into an accurate, fully-licensed 1:24th scale Dodge Ram SRT-10. The vehicle mode features rubber tires, functional steering, opening hood, tail gate and doors with a detailed cabin interior. His robot mode body sculpt details are based upon the 20th Anniversary Optimus Prime toy. However, his headsculpt is based upon Powermaster Optimus Prime. He is armed with a small pistol that is formed from his engine.


Part of the first wave of the Combiner Force assortment, Optimus is a roughly Scout-class sized figure that changes from his futuristic truck with a combiner chest that doubles as his spoiler into a robot in three four extremely simple steps. His individual robot mode only has limited articulation on his shoulders. He also has a little green arrow above the connector on the truck bumper indicating where to crash him to combine with other figures. A 5mm post hole on top of his vehicle mode can accommodate a compatible accessory or Weaponizer Minicon, though he cannot use it in his individual robot mode.

Knight Armor Turbo Changer Optimus Prime is a Voyager-sized figure that transforms from truck to robot in just 2-steps: pulling his whole truck kibble to the front then fold down to complete the robot mode, although converting him back requires some few steps. His only articulation is the elbows, and he features 5mm compatible hands. He also features a "Knight Armor" gimmick, which consists of his mask popping out to his head with the press of the button on his chest. Take note that you need to flip back the mask manually before you turn him back into Truck Mode.


In the interim year, with the Decepticons defeated, the Autobots entered into an even closer relationship with Earth. The Autobots also began the colonization of other worlds, the first of which was the planet Athenia, where Optimus Prime was stationed. It soon became apparent, however, that the consequences of releasing the energy of the Matrix to cure the Hate Plague were more far-reaching than Optimus had anticipated. Without the energy of the Matrix to act as a balancing factor, Vector Sigma had become destabilized. The Decepticons suddenly returned to exploit this, assaulting Cybertron in order to seize control of the mega-computer. Prime took a squad of troops to aid in the battle on the planet. When the arrival of the Autobot Headmasters tipped the battle in their favor, Prime broke off from the main attack and headed down into the depths of the planet, planning on stabilizing Vector Sigma at any cost.


Within G.I. Joe's headquarters, Optimus found Doctor Venom controlling a robotic suit made out of the remains of both Bumblebee and Soundwave. The battle between him and the Joes spilled out into the open and into another battle, where Decepticobra was attacking the United Nations. As more factions joined the brawl, Optimus yanked Bumblebee's components free from Soundwave's body and took to the skies, back to Cybertron. Expelled from the Garden There, he was able to reunite Bumblebee's body with his head. Headmasters
While I don’t think anyone should complain about the price of Lego, I have to say that I don’t think our nostalgia for the 80s/90s is at all misplaced -it really was a better time to be a yuppy/young parent. There were more and better jobs available with better pay, benefits, and less required prerequisites. Young adults today have to work a lot harder to maintain the same lifestyle our parents had..of course there are exceptions, if you are especially gifted you can still make it in today’s world.
All of the Tiny Titans were sold blindpacked. However: there's a tiny clear window in the back to peek at the item inside, making the task of getting the ones you want easier. Every collectible card included in Tiny Titans has a scannable insignia sticker on it. Scanning the badge unlocks a random amount of Energon "currency" and a randomized bonus power-up item, and can only be scanned once per day. It's honestly quicker and less redundant to say which toys don't have this feature.
Like the First Edition figure, Battle Command Optimus Prime's truck kibble can be detached from the robot mode figure to form his separate vehicle mode on its own, but there is one single sacrifice is needed to be made, so brace yourselves: you need to actually trim off the wires that activates it's lights & sound gimmick in order to separate the kibble from the robot, so good luck if you wanna risk your hard-earned cash for that.
Alternatively, the Autobots could concoct a plan where Optimus would pretend to allow himself to be taken prisoner, per Buddy’s suggestion. The Decepticons, fooled into thinking they’ve won, took Optimus Prime into their base. Having hidden his troops inside his trailer, Optimus and the Autobots then led a surprise attack on their unsuspecting foes.
The final scraping was done in Python. A long time ago when I started it, the prototype was in a language called DM or byond. This is a language created for the purpose of writing 2d online rpgs. It was my first language and was easy to pick up but this was pushing its limits a bit. I actually ran the first scrapping on my other post (the Politics one) in this language. The results were not what I used in the article but it was a good proof of concept.
Though the figure does a much better job of conveying the on-screen character model than the ROTF Leader Class mold did, there are still a few inaccuracies—most notably the forearm and shoulder pad designs and the head/torso proportions. The final product also lacks certain paint details visible in stock and packaging imagery, such as the blue rings on his feet and the gold on his pelvis. It should be noted that this mold does not combine with Jetfire.
Cloud Optimus Prime is a redeco of the Classics Voyager Class Optimus Prime mold, transforming into a modern cab-over style truck of made up model, dominated by a large "energy unit" on his roof (actually a wind vane). He features a similar Generation 1-inspired deco to the original toy, but aims for a "cleaner" appearance by omitting many paint details such as stripes on the cab, while the energy unit is colored black with a silver Autobot insignia in homage to Generation 2 Optimus Prime. In robot mode, Prime's energy unit transforms into a large blaster and his smokestacks transform into a smaller laser cannon. Additionally, both weapons can combine together to form a double-barrelled over-shoulder weapon. He was available exclusively at TakaraTomy Mall.

Legends class Optimus Prime is an extremely simplified toy of the extremely complex movie design. As such, he features numerous unavoidable inaccuracies, such as not transforming or even looking very much like the original design or the larger toy versions in robot mode. However, proportionally Legends class Optimus Prime is not far off from the real truck and the Leader class toy's vehicle mode, aside from missing a smokestack on the driver's side. He is articulated at the shoulders and upper legs via ball joints. He can also hold small weapons, such as Cyberverse.
3. Licensed themes: In the 80’s the Lego sets were more generic and interchangeable among themes. There were the basic Space, Town, Castle themes. The color schemes within a theme were more homogeneous (i.e. Blacktron sets or Mtron sets all had a common color scheme). Since there was no “fictional” real life object being copied, piece selection tended to emphasize versatility over “realism”. Almost every Lego set of the past had pictures of alternate models featured on the boxes and instructions that was meant to inspire a child to not just build the model featured in the instructions, but to embark on the mental challenge of making their own creations.
A extensive retool of Lockdown, transforming into a Lamborghini Centenario. An exclusive to Walmart stores and part of the "Autobots Unite" subline, While almost the entire figure has been remolded, the lower legs and feet remain unchanged. The figure is overall a bit taller in stature than the base mold and includes extra steps in the transformation which further differentiate the two. Uncommon for deluxe class toys, the figure does not include any weapons or accessories.
The first generation Optimus Prime transforms into a Freightliner FL86 cab over semi truck.[3] Within his chest is a mystic talisman, known as the Autobot Matrix of Leadership or the "Creation Matrix", carried by all Autobot leaders.[4] When Optimus transforms, his tractor cab disconnects to become a sentient robot, and his trailer opens to reveal an ion blaster, forming a combat deck.[5] The combat deck supports a mobile battle-station and command headquarters armed with assorted artillery and beam weapons that fire automatically. The combat deck can also serve as a radio antenna for battlefield communications between the autobots. The combat deck also included "Roller", a mobile scout buggy meant to scout behind enemy lines. When Roller is deployed, Optimus can see and hear what Roller sees and hears.[6] Injury to one component is felt by each of the others. If the combat deck or Roller were to be destroyed, Prime could survive. However, despite the slight degree of autonomy they possess, the combat deck and Roller would not be able to survive without Optimus.
This creation and expansion of the secondary market in conjunction with LEGO now marketing some of their products to an older audience has made the prices of some old sets increase exponentially.  On the extreme range, there is the UCS Millennium Falcon that is selling new for upwards of $2,000 (and close to $1,500 USED!). It sold for $500 new in 2007. Even non-licensed sets can run a premium, such as the Cafe Corner that was one of the original modular buildings. It was $150 new and now it can sell for over $1,000.

Produced to coincide with the 20th anniversary of The Transformers: The Movie and its release on DVD by Sony, this edition of Prime is a redeco of his 20th Anniversary figure. It replaces the original's metallic paint with flatter colors and does away with any and all vacuum-metalized plastic, as well as altering several other small details across the body, like the color of the lights on his feet and chest.
Nonetheless, I remain a big fan of Lego and although I think they have somewhat moved away from their roots with the excess of licensed products (and the earlier licensed products were, in my opinion, not very good because they contained too many specialized non-generic pieces that weren’t useful for generic building. But that situation is improved and in particular we have found the Star Wars sets to be of most value for generic building, because they generally have very few really specialized pieces (although to be fair the sets are most useful for building other spaceships, etc).
Knight Armor Turbo Changer Optimus Prime is a Voyager-sized figure that transforms from truck to robot in just 2-steps: pulling his whole truck kibble to the front then fold down to complete the robot mode, although converting him back requires some few steps. His only articulation is the elbows, and he features 5mm compatible hands. He also features a "Knight Armor" gimmick, which consists of his mask popping out to his head with the press of the button on his chest. Take note that you need to flip back the mask manually before you turn him back into Truck Mode.

This retool of Revenge of the Fallen Leader-Class Optimus Prime features the head from Buster Optimus Prime and has had his blades replaced with semi-articulated Battle Hooks for face-destroying action! He has a darker paint job and sports black splotches on his body and head to signify battle damage. However, due to these extra "battle damage" paint applications, some other paint applications that were present on the Revenge of the Fallen release were omitted. He also sports a new voice box in robot mode, replacing the infamous "I am Optimus Prime!" with "We must stop the Decepticons!" The international release, however, retains the same abbreviated "Optimus Prime" sound clip as the original release. To the annoyance of many fans, this version was the main version released just about anywhere outside the United States (all of Canada, Latin America, Europe, and Asia). The box also mentions racing sounds, which may or may not be referring to the button-activated diesel engine noises carried over from the Revenge of the Fallen version of the figure.
While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth, picking up one year after the events that saw Optimus Prime's return to life.
In "Mission Accomplished", Optimus is pressured by Sentinel to tell Ultra Magnus that his story about the Decepticons is untrue, but he refuses. Meanwhile, the on-board computer plots a train infused with a shard of the Allspark. When Ultra Magnus and Jazz set off there, Optimus suspects that the Decepticons are luring them into an ambush and rushes to their help, though Sentinel Prime tries to detain him. At first, Ultra Magnus doesn't believe him, but a short time later, Optimus is proven right as Starscream falls from the sky after being blasted by Megatron, much to Sentinel Prime's astonishment and fright. Starscream turns out to be alive, inflicting injury on Ultra Magnus. Optimus takes the affair into his own hands momentarily and, with Sentinel's aid, manages to apprehend the Decepticon. While Sentinel Prime deflects Starscream's shots with his power-shield, Optimus succeeds in taking Starscream by surprise and handcuffing him. When the shackled Starscream is delivered to the Elite Guard spaceship, Ultra Magnus admits Optimus Prime was right and allows him to stay on Earth in order to seek out the other fragments of the Allspark.
In the series released by Marvel Comics, before the Great War broke out on Cybertron, the robot who would be Optimus Prime, before he received the Matrix of Leadership from Sentinel Prime, was a Transformer of note, displaying his skills in the Infraformers Sharpshooting Competition. When the war began, Prime quickly made a name for himself as a combat leader of the Autobots.
They’ve been invaded by pop culture favorites, too. Robot Chicken turned the couch gag into stop-motion animation, they’ve parodied Breaking Bad and the Game of Thrones opening sequence, and the living room has gone all topsy-turvy M.C. Escher-style. But best of all, for our purposes, was when the five Simpsons drove into the living room as familiar vehicles, then transformed into robo-Simpsons. Baby Maggie was a blue Volkswagen Beetle, clearly as an homage to Bumblebee, despite the odd color choice. Perhaps it was it was switched to match her onesie.
"Hero Mashers" Optimus Prime, Bumblebee and Grimlock took on Megatron in the middle of a busy city. Optimus came to Bumblebee's help while riding atop of Grimlock, swapping heads with his mount to bite Megatron's arm off, getting a hold of the Decepticon's jetpack at the same time. He attached both pieces to himself, and flew around for a bit before returning to the battle. He thoroughly scrambled his pieces with those of his teammates, then took down Megatron with his "dino-fist." Afterwards, the Autobots returned to their normal configurations (though it took them more than one try to do so!) Hero Mashers commercial

For this re-release of Masterpiece Convoy, Takara submitted to the biggest desire fans had for the figure and produced a full-size, fully transforming plastic and die-cast metal trailer. The trailer opens up into Convoy's Combat Deck, with storage for its accessories and a functional repair drone, though Roller is conspicuous by its absence. Like the original Combat Deck, the drone can extend through holes in the roof and front of the closed trailer, and the interior has enough room to accommodate one Alternators figure in vehicle mode. Some reports suggest that the paint on this figure's chest chips more easily than past editions.
Optimus Prime also appears in the text-based fiction Dungeons & Dinobots. He commands the Autobots to attack the Arch-Ayr fuel dump. The attack is thwarted when the main Decepticon forces are augmented by the Mayhem Suppression Squad. When Wheeljack attacks both the Autobots and Decepticons with a massive force of drone Dinobots, Optimus offers to allow the outcast Autobot scientist to rejoin the Autobot ranks if the Dinobots destroy the Decepticons. The Dinobots prove unstable and go on a rampage, attacking everyone, including each other. Optimus punishes Wheeljack by having Ratchet painfully reformat him for Earth mode and assigning him to the Ark repair crew on the advice of Side Burn. He punishes Blurr for allowing his heroic Decepticon cousin, Crasher, part of the Mayhem Suppression Squad, to live. When Grimlock returns to the Autobots, Optimus lets him live because the Dinobot has gained useful intelligence and helps in work on the Ark.
In the animated series, Optimus Prime was originally in the Autobot Academy and friends with Sentinel Prime and Elita One. When Elita is lost on a planet dominated by giant spider-like aliens, he blames himself for leaving her behind, where she supposedly dies in the explosion of a wrecked Decepticon warship loaded with Energon. Sentinel doesn't forgive him for losing her and Optimus takes full responsibly for Elita's demise. This caused Optimus Prime to wash out of the Autobot Academy. However, Ultra Magnus pulls some strings so that Optimus Prime could be captain of a strange Space Bridge repair crew composed of a war vet named Ratchet, a fledgling cadet named Bumblebee, and his fellow cadet Bulkhead. Optimus is given command of the starship which is the vehicle mode of Omega Supreme.

In 1986 the Transformers animated movie had been released, and during the run of the movie, through a pamphlet that came with certain figures, you could order certain Transformers through the mail, such as Optimus Prime among other toys. The toys came in a standard brown mailer box, with items, booklet, and a limited Edition Movie certificate and sticker.
The sequel series, Transformers: Generation 2, began an undisclosed period of time later. At the beginning of the series, Prime was restored to a form resembling his original body. He and the Transformers found themselves caught in the schemes of a new generation of Cybertronians, led by the icy Jhiaxus, who were colonizing and cyber-forming other worlds. Plagued by nightmarish visions of a life-destroying entity called "the Swarm", Prime looked into Cybertron's past and discovered that Jhiaxus and his kind were the result of an unintentional Transformer reproduction. Their nature and intent, he found, was distilled to the purest, most unemotional form of conquest and that the Swarm was the by-product of this process. To fight this new enemy, Prime and the Autobots entered into an alliance with the recreated Megatron's Decepticons. Though Prime was eventually consumed by the abomination and destroyed, he was able to unleash the energies of the Matrix into the Swarm, purifying it. In parting, the Swarm recreated Prime in a new form, and he and Megatron set out to lead the united Autobots and Decepticons into a new age.

Created with the specific purpose of producing an Optimus Prime as accurate to the original animated series as possible, the toy is exceptionally poseable, partially constructed from die-cast metal, features rubber tires and vacuum-metalized plastic and is heavily detailed, with sliding pistons in its joints and working spring-loaded suspension in vehicle mode. The figure also contains multiple non-intrusive gimmicks, such as a moving mouthplate to emulate Prime's traditional method of speech, flip-up communications panels on the forearms depicting images of Bumblebee and Starscream, and an opening, light-up Matrix chamber in the chest, which contains a removable vacuum-metalized Matrix of Leadership that can also be pulled open.
Part of the first assortment of "Custom Kreons", this version of Optimus Prime comes with a buildable parts rack on which to hang/store his many many extra pieces. His tampographs are much more heavily-detailed than the original Kreons, based on the original Optimus Prime toy. His "normal" helmet (and small sword) are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens), plus a buildable large rifle, a buildable wing-pack, and a ray pistol (originally an Andorian blaster from Kre-O Star Trek).
Starscream was my first transformer. I got it because my parents bribed me to climb to the top of the pole in the gym class. Shit was scary. Do they even make kids do that anymore? Anyway, I protected that with my life. Sorry to hear about yours. I didn't have siblings at the time but within a few years I did have some who pretty much did destroy everything they touched. Luckily by then I was a teenager and figured out good hiding places for important stuff.
Besides the inordinate number of Hogwarts Castles, we can draw similar conclusions from this chart as we can from the Pirate Ship Chart. The prices really have not changed that much in the measurable time-frame2. The weighted average for all the castles is 10.56 cents per piece. As with the Pirate Ships, there does seem to be a general increase in piece count, however.
Voyager figures all feature a spring-loaded MechTech-style transforming weapon, partially constructed from translucent plastic, which lights up via LED when the weapon is deployed. The figures themselves also feature translucent plastic, so the moving LED creates the image of energon power "flowing" from the character's bodies into their weapons. This worked better in theory than in practice. Internally, these figures were referred to by Hasbro as "Powerizers".
Optimus later led a convoy in search for a building site for Autobot City, which ran into a Decepticon ambush. Rodimus Prime remembers the Transformers greatest battle on Earth. He sent off several Autobots to get help, knowing this was the only chance of victory. Transformers Combat Data Those several Autobots were seen again, but Prime... wasn't.
As part of the Robot Replicas line, this version of Optimus is a non-transforming action figure that utilizes Revoltech-style jointing. The sculpt hews much closer to the movie CGI model than is possible with the full transforming toys, plus the universal jointing of the line allows for his forearm to be replaced with his hand-cannon... or bits from other Robot Replicas.
In the United Kingdom, this Optimus Prime was released as an Argos exclusive along with several other sets branded as part of the Reveal the Shield subline imprint. His United States release was initially claimed to be exclusive to Target by online retailers from Asia, but even though the other Reveal the Shield products eventually became available at Target, Voyager Class Optimus Prime was released as a Toys"R"Us exclusive in the United States instead, complete with a "Toys"R"Us exclusive" sticker. Also, both his United States and Asian releases lack the "Reveal the Shield" logo the United Kingdom release has (but still feature the "Reveal hidden images" call-out).
However, Prime was encouraged to keep fighting by the cheers of a human boy named Junpei. Megatron, surprised at Prime's resilience, attempted to finish his foe off with his Tornado Axe attack. Prime countered with his Double Wheel-Torque Mega-Ton, which trumped Megatron's attack and injured the Decepticon badly. Megatron teleported back to his ship and left Earth's atmosphere, vowing to return.

The first toy in TakaraTomy's United toyline is a redeco of the War for Cybertron Deluxe Class Optimus Prime, transforming into a Cybertronic "armored truck". As has been TakaraTomy's wont of late, he now sports a metallic red paint job, with brighter pink paint applications and cooler grey parts, and features several additional paint details to those present on the Hasbro figure in the form of black chest windows and pink lines on his face mask. His rifle transforms as well, folding and plugging into the roof of the vehicle mode. The rifle can also peg into his forearms, and, in its compact configuration, can attach to his shoulders via peg holes on the backs of his front tires or stored behind his back in robot mode.


In true Prime style, forward portion of the vehicle mode detaches to become Prime himself, while the rear "trailer" transforms into a gun emplacement. In robot mode, the barrel of the truck's left cannon detaches to become a hand-held rifle for Prime, and the figure features an opening chest compartment concealing a removable Matrix of Leadership accessory. Prime's gigantic hands mean that he can't hold it especially neatly, but he can certainly grip hold of it. Atypical of both most Unicron Trilogy figures and indeed, Optimus Primes in general, Prime's hands are not designed to accommodate weapons with 5mm posts, instead featuring a small peg-hole in his palm that allows him to tightly grip objects designed to fit there, like his own rifle, Leobreaker's whip, Cybertron Wing Saber's swords, and Cybertron Metroplex's axe. However Cybertron Wing Saber's sword hilts will also act as adaptors allowing Prime to hold and use 5mm weapons.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-Hobby in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
This unusual iteration of Optimus Prime is a redeco of Beast Wars 10th Anniversary Optimus Primal, transforming into a robotic gorilla in the pseudo-technorganic-looking style of the other Jungle Planet toys. He comes with a Jungle Planet Cyber Key stamped with the code d7s9, which plugs into his flying surfboard accessory to reveal a spring-loaded missile launcher. His brown and cream deco seems inspired by Donkey Kong, while the scar over his beast mode eye seems intended to homage Peter Jackson's King Kong.
I agree with Aidan but would expand on his point. It’s not just that the sets seemed bigger; they were. As the relative complexity of sets has increased, so too has the piece count, but there has been an overall decline in the size of the models due to increased build complexity and a corresponding reduction in size of the pieces required to create such detail. The negative affect on perceived value in this is apparent, though I would argue, misguided when one considers the build quality and detail of new and recent sets.

A Supreme sized version of Optimus Prime, based on the Voyager class figure design.[153] When pushed forward, the upper torso spins and transforms, with the transformation sound indicating the completion of the process. The right arm has an axe-swinging action while the left arm has a punching action. Includes show-accurate battle axe that features retractable blades and a spinning jet flame. Also features sound effects and pre-recorded dialogue ("My name is Optimus Prime!", "Let's go!" and "Bring it on!"), as voiced by David Kaye.
A heavy retool of Combiner Wars Ultra Magnus, this Optimus Prime is based on the Powermaster Optimus Prime toy from 1988. Despite this, Hi-Q (now renamed 'Autobot Apex', presumably for trademark reasons) doesn't form the engine on Prime's chest; instead, he transforms into a de-faceplated version of the original Powermaster Optimus Prime cab robot head, over which a helmet slides during transformation to complete the Powermaster Prime look. In all three of Optimus Prime's modes are various pegs and seats with which Titan Master figures can interact. Like other Leader Class figures, his base mode can connect to other Titan Returns figures with base modes.
This figure contains an unusual amount of sculpted detail on the inside of the plastic. The gorilla mode's chest has a ribcage, and the inside of the gorilla's face has a sculpted microphone, which lines up perfectly with the robot mode's head! Also, opening this toy's chest in robot mode reveals sculpted detail resembling the Key to Vector Sigma as it appeared in Beast Machines.
If there was one thing the toy planes of yonder were lacking, it was controllability. Guaranteed crash landings and the subsequent walks of shame to go pick up the pieces started to wear a little thin. The advent of radio-control provided an answer for that. But for model builders Aviation Design, that was child's play. Hense, the birth of the FALCON 7X business jet.
Part of the first wave of Prime: Beast Hunters Voyager Class toys, Optimus Prime is a larger, all-new mold. He also transforms into a monstrous, flat-nosed truck, but differs from his Cyberverse toy by having a faceplate-less mouth, and by being equipped with a large four-winged backpack in robot mode. He features a 5mm port for each of his hands, one on his backpack, one near each of his front wheels, and one on each of his two upper wings.

If Optimus decided to send the lead team to attack the Decepticon headquarters, the team managed to infiltrate the Decepticon headquarters by using Beachcomber’s knowledge of the secret doors’ location, and Brawn’s strength to keep the doors opened. The Autobots then stormed the fortress, and Optimus maimed Megatron himself with a shot of his rifle. He then grappled the Decepticon leader, and forced him to lead himself, Inferno and Beachcomber to the Decepticons’ lab. There, the Autobots disabled and destroyed the Destruction Beam device, captured Megatron, and left many Decepticons permanently maimed. Though they later traded Megatron back to the Decepticons for the safe relief of the Autobots captured in Center City, the Autobots were ultimately victorious that day.
Outside the United States, this set was available in a thinner rectangular box. It contained all the original accessories from the American release, but not the DVD. An English-only version of this packaging format was available in Asia and Australia (initially only available at Myer stores, but later also at Toys"R"Us, Kmart and Target, eventually at drastically reduced prices), while a bilingual English/French packaging variant was available in Canada, still including—though not advertised on the packaging—the (English only) comic book.
The earliest version, as shown in the first patent application for the toy, was to have the Prime cab be a triplechanger, turning from truck cab to jet or robot.[16] The nosecone of the jet and robot legs were released by the Powermaster lock in the same fashion as the legs in the final version. Optimus would have had winged arms in non-super robot mode. The super robot mode's head was also integrated into the trailer's hitch... and lacked a faceplate.

Released by TakaraTomy as part of a 2010 promotion honoring the "future era" of the original cartoon (which was set in 2010 in Japanese continuity, you see!), this exceptionally morbid re-release of the Masterpiece Convoy figure recolors the Autobot leader in blacks and greys, representing his dead body from The Transformers: The Movie—but don't worry, kids, it's actually a "sleep mode", according to the figure's name! Limited to 2010 pieces in Japan (see what they did there?), it comes with all its customary accessories, including the Perfect Edition trailer, redecoed where appropriate: the trailer itself has become translucent, its energon-axe is now transparent grey, and Megatron, in another movie homage, is rendered in translucent purple, evoking the scene depicting his transformation into Galvatron. The figure was also released in other parts of Asia as a limited edition of 2010 as well, combined with the Japanese edition for 4020 total. The Japanese version denotes "Serial Number in Japan: ####/2010" on its bio card with the number out of 2010, while the Asian version denotes "C1 - ####/2010" with the number out of 2010 on its bio card.
Dark of the Moon Voyager Class Optimus Prime is an all-new mold. He features heatshield details in his sculpting and translucent solar panels on various parts of his body, and huge gas tanks. Optimus himself is differently proportioned, having larger feet and a smaller torso and arms. He also features some faux-kibble/parts: His actual windshield chest is being covered by a sculpted panel featuring his characteristic deformed windshield-chest, and a pair of sculpted tires on his thighs. His pair of optics is designed to have a light-piping gimmick, but it was rendered useless since it was painted in smoke gray on top of the colorless transparent plastic.
A younger version of Prime Optimus Prime is one of the playable Autobot characters in the 2010 video game Transformers: War for Cybertron. In the Autobot campaign, he starts off as Optimus, a warrior who rallies his fellow autobots against the Decepticons following the reported death of their leader Zeta Prime. He succeeds in defending the Autobots' home city of Iacon from Starscream and his forces. Optimus then receives a distress call from Zeta Prime. Knowing that this is most likely a trap set by Megatron, he proceeds anyway with a rescue mission. He lets himself, Bumblebee, and Sideswipe be captured by the Decepticons and is sent to a prison in Kaon, the decepticon capital, in an elaborate scheme to free Zeta Prime and all imprisoned Autobots. He frees all the other prisoners, and defeats Soundwave and his minions Frenzy, Rumble, and Laserbeak, but he is too late to save Zeta Prime. After taking Zeta Prime's body back to the Autobot high council, he is bestowed upon the well earned title of Prime.

General Optimus Prime hailed from Primax 096.0 Beta. Ask Vector Prime, 2015/09/06 During the third Cybertronian war, General Optimus Prime profile card he fought on Earth against Megatron: in the Battle of Sherman Dam, the two fought directly but the battle would have gone against the Autobots if not for the arrival of the Dinobots. Ask Vector Prime, 2015/09/06 In the latter stages of the war, he upgraded himself with heavier armor and weaponry in order to match Megatron's flight and combination upgrade.


Having been caught unaware by a surprise attack launched by the Decepticons, Optimus led his troops in a losing battle against their mortal enemies. Though Optimus managed to dispatch a few Decepticons, namely Thrust, whom he punched through the chest, he soon found himself crippled and surrounded by enemy forces. Praying to Primus as the Decepticons readied their weapons, Optimus heard Grimlock calling out to his fellow Dinobots to combine, prompting the Autobot leader to yell out a plead to Grimlock to stop. It was too late, however, and The Beast began rampaging, killing Autobots and Decepticons alike. Taking advantage of the situation nonetheless, Optimus tackled Megatron and began beating on the Decepticon leader. The tide of the battle now shifted, Optimus attempted to reach Grimlock’s consciousness within The Beast so that its mindless carnage could come to a halt. It didn't work. The Beast Within
As a result of striving for vehicle realism and painstaking accuracy to his visual portrayal in the live-action films, this Optimus Prime ends up being ridiculously complex. Transforming him back into a truck is probably more complicated than shown in the movie and can only be considered torture. Very unfortunately, the instructions for this toy are infamous for being amazingly vague and unclear in their visual depiction of the transformation steps, making transformation even harder. Also, let us not forget that, upon transforming him back to robot mode, he will declare his identity over and over and over and over and over until you're finished.
Optimus confronted his archenemy on the battlefield, though he had to knock Starscream aside to get to him first. Due to a nearby explosion that rocked the battlefield, Optimus nearly lost both his stance and his head when Megatron took advantage of the opening. But Optimus's quick reflexes allowed him to shift to vehicle mode and back, dodging Megatron's attack and striking back in the process. As the battle raged on, both combatants found themselves evenly matched. Then Ratchet contacted Optimus with dire news; the Decepticons had managed to abduct SARA! Fate

Megatron is captured by the Autobot Targetmasters in the episode "Do Over". When Optimus learns Megatron has been captured, he rushes to be the one who kills his old enemy, despite the closing launch window of the Ark. When confronted by Optimus Prime, Megatron attempts to use the Autobot Targetmaster Nightstick to shoot the Autobot leader, but Nightstick takes control of Megatron's arm. Megatron then tricks Optimus into using Megatron's own sword to cut his hand off, freeing him from Nightstick. Optimus fails to kill his foe and misses the launching of the Ark, which has been taken over by Rodimus. He then takes out his anger on Blurr.

I am so not in for this, it will still look arguably better then MP-01. But the true MP Optimus Prime is MP-10. This new one is all about animation, and the backpack is pretty huge. MP-10 has a built in part for weapon storage... it was not actually needed. Idk about this new direction. I’ve been pretty much exclusively 3rd party and older MP’s. This new style of lavishly G1 animation is not for me. MP-10 was the standard and the perfect blend. For whatever reason Takara is/has been pushing a new direction that a good majority don’t really want to go in on. See Transformers 3rd party market. If there wasn’t a itch that needed scratching it wouldn’t exist.
Battle Blades Optimus Prime is a brand new sculpt that attempts to replicate his Leader Class design. He is much more movie accurate than the previous Voyager incarnations. He features two energon swords made of soft plastic, similar to his Leader Class incarnation, albeit not spring-loaded. They can be detached from the mushroom joints they're on, although doing this excessively may cause them to warp.
A second Target-exclusive redeco of the Voyager Class Optimus Prime toy, the gray molded pieces were recolored beige-grey, and multiple parts that were previously molded in blue and red (the chest, shoulder pads, and leg interiors) had their mold colors swapped, with extra paint operations to make up the difference. As such, the toy has very few visual differences from the regular release of the sculpt, in a "doing things differently to achieve a very similar end result" sense. This version was only available in a pack with an unchanged Deluxe Class Bonecrusher.
This series introduced the dangerous Predacon faction, robotic dragons and mythical creatures that posed a threat to Autobot and Decepticon alike. In response, the 'Bots and 'Cons don new armor (the Autobots in spiky, over-weaponized armor reminiscent of Mad Max, while the Decepticons take on more beastly traits) and are armed with new gimmick-laden launching/spinning weapons. On-package bios were reduced in length to just a sentence or two, and the instruction sheets instead feature facts about one of the figure's main weapons, as well as a chapter of the Tales of the Beast Hunters prose story.

This figure was made available again, without any changes, in 2015, this time in new packaging resembling the then-concurrent packaging design for the Generations line, but replacing the name "Generations" with "Authentic Transformers". It was also given a new Hasbro product code number and UPC barcode, thereby technically making it a separate product. In 2017, it was re-released again, this time in a minor variant of the 2014 version's packaging (including the original product code number and barcode) that now lacked the reference to the non-existing "Reveal the Shield" gimmick.
A mode for Arms Master Optimus designed for underwater combat, "Aqua Screw Mode" was shown in Cybertron Satellite segment of "Explosive Sword Transformation! Wheeljack and Dreadwing". C.L. and Balo are combined into a propeller engine and attached to his right foot, their GR and G redecoes do the same for the left, and B.H. B is attached to his right shoulder to act as a radar system. He wears Arc S's blade on his right arm and wields the Giga Tornado Cannon Combo Weapon.
Thanks to TFW2005 user Fc203, we have some screencaps from what appears to be a stop-motion review video featuring Studio Series Shatter, among other Transformers and non-Transformers toys. The screencaps give us a good look at her robot and alt mode as well as a few poses. Like her partner Dropkick, Shatter only comes with one alt mode. However, that alt mode is her car mode and not her aircraft mode; whereas Dropkick is the opposite. She also seems to be sporting a bit more of a generic head that isn’t quite movie-accurate, but the rest of the figure seems to pay a good deal of homage to her pre-jet mode on-screen model.
Star Convoy was reissued by Takara in 2005, with some notable alterations to his deco: his white plastic was replaced with metallic silver, and the yellow star on his chest was chromed golden. Star Convoy himself retained some of his original decals but most notably his "simulated head lights" and "wind shield panels" were stamp graphed on him, similarly, Hot Rod's were replaced with the same stamp graphing applications. Additionally, where the original toy had been packaged in robot mode in a tall box decorated with the standard Japanese package art of the time, the reissue was packaged in vehicle mode, in a long, wide box more reminiscent of the original Generation 1 toys.
×