So as a MOC builder, I have found that I tend to design MOCs on LDD and acquire parts as needed for each MOC from bricklink. I now tend to pass on licensed themes. I am especially turned off by the rehashing of many of the Star Wars vehicles. Sets that I buy tend to be Creator sets for my kids or the occasional “special edition” set that appeals to me such as the Sopwith Camel set.
This Trailer is identical to the original BeCool Trailer other than the stickers, and now comes with the trailer/launcher accessory from Bot Shots redecoed in blue with red stripes. While the vehicle mode sticker in his chest remains, the hand-holding and sleeping ones have been replaced by pictures of the launcher: one in base mode and one in trailer mode. He also comes with a sticker sheet for decorating the Trailer Base.
Both Jet Power Optimus Prime and the accompanying redeco of Voyager-Class Revenge of the Fallen Megatron would have come with an issue of the Unite for the Universe comic book, but due to the cancellation of both figures, the comics were eventually included with the Movie Masterpiece releases of Leader-Class Starscream and Bumblebee. Of amusement is the fact the comics are essentially showcasing toys that have been canceled.
Across the assorted continuities of the original Transformers universe, there have been various interpretations of Optimus Prime. One of Prime's most notable characteristics over all continuities his unswaying commitment to leadership by example. The animated series' version of Optimus Prime is depicted as a straightforward, wise, and upbeat battlefield general. Additionally, the animated series' version of Optimus dislikes rap music, putting him at odds with music-loving characters like Blaster and Jazz.
Hot Rod first appeared in the American animated series during the events of The Transformers: The Movie (as a main protagonist), where he was one of the many Autobots stationed at Autobot City. He was first seen fishing with Daniel Witwicky. When Daniel saw the shuttle that was going to make a supply run to Autobot City, he told Hot Rod and together they both went to an observation point, only to see a hole in the shuttle. The ship had been previously hijacked by Decepticon forces led by Megatron, with its crew killed.
Commander class figures all come with translucent weaponry, and feature some amount of translucent plastic in their bodies (blue for Autobots, but a variety of colors for Decepticons), a feature designed around interacting with the line's vehicles (see below). Each vehicle is equipped with an "Energon Booster", a light-up accessory that can plug into the Commanders' weapons or into the posts and ports on the figures' backs to illuminate them with "glowing energon power".
Calibur Optimus Prime is a retool of the Armor Knight Optimus Prime figure, who is a retool of the original Age of Extinction Leader Class figure, with the fifth wheel hitch now forming his handheld shield based on the one used in Dark of the Moon, which results in a backpack-less robot mode. He also comes with an axe based on the one used in the third film.
Rodimus appeared in the text-based fiction Dungeons & Dinobots as one of the Autobots who attacked the Arch-Ayr fuel dump. Sent to capture rogue Dinobots for the Autobots, he was part of the group that captured Swoop. Together with Blurr, he then tracked Grimlock, but ran into competition with the Decepticon allies Sideswipe and Cliffjumper. After Grimlock bit off his left hand Ratchet replaced it with a circular saw (a reference to one of the original Rodimus' melee weapons in The Transformers: The Movie).
An absolutely incredible 28 seasons in, The Simpsons writers and producers have had to be unbelievably creative in coming up with a new couch gag for more than 600 episodes. They’ve had a doppleganger Simpsons family walk in on the family, the whole town has absurdly squeezed into their living room, and we’ve toured the inner workings of Homer’s body.
This line features robot versions of various Star Wars characters. Confirmed figures are Darth Vader, Luke Skywalker, Boba Fett, Commander Cody and Jango Fett. Darth Vader turns into his custom Tie Fighter while Luke Skywalker turns into an X-wing. Jango Fett and Boba Fett become Slave I, and Commander Cody turns into a Turbo Tank. There is combiner of Millennium Falcon of two characters, Han Solo and Chewbacca and Primus/Unicron-like Death Star that transforms into a giant Darth Vader. There are more Star Wars characters into Transformers like General Grievous and Obi-Wan Kenobi. This line was later revived and merged into the Transformers: Crossovers toy line, many more Transformers included characters from Star Wars: The Clone Wars like Ahsoka Tano who transforms into her Jedi starfighter, and Captain Rex who transforms into an AT-TE.
Part of 9th wave of One-Step Changers, and the first of the Combiner Force subline, this Optimus Prime is yet another new mold, with a different transformation scheme (a similar engineering to Age of Extinction's Bumblebee) consisting of pulling the switch on the back (do not hold the truck kibble when you transform him). Like most One-Step Changers, Optimus Prime features limited articulation on the shoulders, and features 5mm compatible hands.
A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.
The Goldbug change happens in many different continuities, but in the original animated series, it happens like this: while trying to rescue the body of the dead Optimus Prime, which was being held by evil humans, Bumblebee’s damaged by Superion so badly that they have to rebuild him as a more powerful Throttlebot. His new body is much shinier, so a restored Optimus Prime dubs him Goldbug. In the Shattered Glass continuity, he goes evil as Goldbug. And in the IDW comics, confusingly, Goldbug was never affiliated with Bumblebee, but is the leader of the Throttlebots.
In a later scene, Hot Rod fled the city with Kup and the Dinobots when Galvatron, a recreated Megatron, attacked the city again, this time only smaller, after being reformatted by Unicron and taking revenge on Starscream. After meeting up with the other Autobots after a series of adventures on the planets Quintessa and Junk, Hot Rod returned to the other Autobots and rushed to Cybertron to save it from being eaten by Unicron. Facing Galvatron inside Unicron's body, Hot Rod was able to get his hands on the Autobot Matrix of Leadership in the confrontation, as the voice of Optimus Prime was heard saying, "Arise, Rodimus Prime". The power of the Matrix reformatted Hot Rod into Rodimus Prime, maturing him, giving him a larger body, deeper voice, and different vehicle mode. It also destroyed Unicron's body, bringing the events of the film to a close with Rodimus Prime as the new Autobot leader.
Doug Smidebush, Lior Keinan , Kelvin Nduka, Thad Standley, Nolan Zak, Adam Franks, Stephen Brown, Loren Roberts, Matt and Nykki Boersma, Tom Morgan, Jack Everitt, John Kovalic, Seiler Hagan, Jess Hart, Will James, Christopher M. Kelly, Roberto L. Vargas, Michele Hall, Chuck Lawton, Ismael Schonhorst, (There are those who call him) Tim, Vladimir Weinstein, Randiman Rogers, Robert Booth, Henry Roenke, Kevin Culp, W. David MacKenzie, Nicholas Richards, John Idlor, Michael Fox, Rob H., Matthew Cody, Dan Callahan, Patrick Kohn, Seth Phillips, Kevin Korpi, Ben MS, Monica, Mark Gonyea, Pharlain Ross, Derick Larson, Furstarter.com
This version of Ultimate Class Beast Hunter Optimus Prime is exclusive to Cybertron Con 2013. While Prime itself is unchanged, he has been packaged in the box with his backpack plugged into his back, allowing the cannons to rotate when his spiky stomach-fenders are pushed down. The box itself also has slightly different text and graphical layouts, is encased in a large, slip-on outer covering, and features a designated number as part of the Thrilling 30 line.
The original Hasbro stock photos depict him as having red paint operations on his kneecaps and the sunken ridges around his blue abs that the final product lacks. The photos on the cardback show him with a red Autobot symbol on his truck door and blue plastic instead of grey for the piece just in front of his rear tires. The back photo also depicts his side windows as being the same translucent orange as the front ones, when they are, in reality, a garish solid orange.
The second Optimus Primal toy was an ape in the Ultra size class. Though the transformation from primate to humanoid was a relatively simplistic one, the toy compensated with more than a fair share of weaponry and action features. A compartment on his right forearm opened to reveal a skull-shaped mace he could hold in his fist. His left forearm could open into a double-barreled missile launcher. On his back were two spring-loaded missile launchers which auto-flipped over each shoulder. By pulling a lever in the center of his back, both arms would either spin at the bicep or bend in and out at the elbow, depending on the placement of notch-buttons located on either bicep. This gimmick was shown to be an effort to simulate a gorilla beating its chest while Optimus was in beast mode, but could also be used in robot mode, making him swing his weapons wildly before himself. And finally, like many first-year Beast Wars toys, a battle mask/"mutant head" could be deployed over his robot head.
The Heroes of Cybertron PVC figurine line is an adaptation by Hasbro of Takara's own Super Figure Collection line. The main differences between the two lines is that Hasbro cast Autobot and Decepticon figures in clear blue or clear red PVC respectively, then completely painted the figurines. This allowed the eyes to 'glow' when placed in front of the light source.
A special edition Bearbrick released in celebration of the Transformers 30th anniversary, Optimus Prime is a redeco of Bearbrick G1 Optimus Prime in a deco based on his Age of Extinction appearance. He transforms from a Bearbrick painted up like himself to a bear-eared robot and comes with no accessories, but holes in his robot mode hands can accommodate other toys' weapons.
Released as part of the Energon Igniters Power Plus Series subline, this Optimus Prime is a Scout-sized mold that converts from robot to truck based on his appearance in Age of Extinction in just a few steps. His only articulation is the swiveling upper arms & pivoting arm joints, and his fuel tanks also doubles as a flip-out cannons, activated in vehicle mode. As with all Nitro and Power Plus figures, Optimus also comes with an energon core, which allows his vehicle mode to propel forwards.
This exclusive redeco of Optimus Prime features darker shades of red and blue than his other releases and has extensive paint applications to resemble his on-screen appearances in The Last Knight, particularly his Nemesis Prime alter ego seen in the film. To that end, he features movie-accurate flame patterns, which are larger and more elaborate then the ones on the regular release or the SDCC exclusive, on his vehicle mode exterior and robot pectoral armor. His eyes and sword are also painted metallic purple, but his shield is completely unpainted for some reason.
Part of the first wave of 2012 Generations Deluxe Class toys, Optimus Prime is based on his Fall of Cybertron design, and transforms from a robot to a Cybertronian truck and back. His ion cannon, based on a weapon seen in his concept art, can mount via either of its two 5mm posts onto ports on his hands, forearms, back, and shoulder smokestacks. The toy is known for being oddly small for an Optimus Prime toy, especially when compared to other toys from the same line. This allows him to be more or less in scale with Grimlock and Bruticus (likewise from the same line), however. Optimus features sculpted fake wheels on his back.
Armada Built to Rule Optimus Prime transforms into a fair approximation of his vehicle mode, but the robot mode is quite inaccurate, due to the very broad, flat Trans-Skeleton with thin, stick-like limbs attached to it. The set came with a very simplistic "Mini-Con" Sparkplug partner kit that did have a more dedicated "Powerlinx" connector than the standard construction pegs, though these are a bit too thin to be used as attachment points for regular Mini-Cons (they stay, sort of, but it's a very loose connection). The 101-piece set also features pressure-launch missile-firing "smokestack" cannons.
Being a brand new and intricate remake of the Autobot leader, MP-10 was used as the gold standard in terms of scale for future Masterpiece figures, with all the upcoming releases being sized to best match him. Much like his older incarnation, he was also cherished by collectors, generating heated debates on which version is the best one up to this day.
He comes with a MechTech rifle converts into a large battle axe, and can be locked in by pulling the lever all the way in and tilting it into a gap to the left. The rifle has a separate flip-out handle, while the axe uses the rifle's long barrel as the handle, meaning that Optimus can grip the axe with both of his hands. This weapon was also retooled in a running change, adding a stop to the handle instead of relying solely on the gear system to prevent the locking assembly from flying off into parts unknown.
Unusually for the smaller Voyager Class of toys, Robo-Vision Optimus Prime comes packed in robot mode in a special hexagonal column box with many windows, similar to the original packaging for 20th Anniversary Optimus Prime. The package also includes a Robo-Vision Decoder. Strangely, this Target exclusive preceded the release of the regular Voyager by a large margin, coming out on June 2, 2007 with the initial wave of movie toys.